X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/fc8c5cdd12428f39dbb67b7e744b2dfdd59b5f23..f4bad97d92bf72dbb76f13c7fb7d2268129e01c3:/armsrc/hitag2.c diff --git a/armsrc/hitag2.c b/armsrc/hitag2.c index 05ac1f5e..839240bd 100644 --- a/armsrc/hitag2.c +++ b/armsrc/hitag2.c @@ -29,6 +29,30 @@ bool bAuthenticating; bool bPwd; bool bSuccessful; +int LogTraceHitag(const uint8_t * btBytes, int iBits, int iSamples, uint32_t dwParity, int bReader) +{ + // Return when trace is full + if (traceLen >= TRACE_SIZE) return FALSE; + + // Trace the random, i'm curious + rsamples += iSamples; + trace[traceLen++] = ((rsamples >> 0) & 0xff); + trace[traceLen++] = ((rsamples >> 8) & 0xff); + trace[traceLen++] = ((rsamples >> 16) & 0xff); + trace[traceLen++] = ((rsamples >> 24) & 0xff); + if (!bReader) { + trace[traceLen - 1] |= 0x80; + } + trace[traceLen++] = ((dwParity >> 0) & 0xff); + trace[traceLen++] = ((dwParity >> 8) & 0xff); + trace[traceLen++] = ((dwParity >> 16) & 0xff); + trace[traceLen++] = ((dwParity >> 24) & 0xff); + trace[traceLen++] = iBits; + memcpy(trace + traceLen, btBytes, nbytes(iBits)); + traceLen += nbytes(iBits); + return TRUE; +} + struct hitag2_tag { uint32_t uid; enum { @@ -153,10 +177,6 @@ static u32 _hitag2_byte (u64 * x) return c; } -size_t nbytes(size_t nbits) { - return (nbits/8)+((nbits%8)>0); -} - int hitag2_reset(void) { tag.state = TAG_STATE_RESET; @@ -399,8 +419,8 @@ void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, si break; } -// LogTrace(rx,nbytes(rxlen),0,0,false); -// LogTrace(tx,nbytes(*txlen),0,0,true); +// LogTraceHitag(rx,rxlen,0,0,false); +// LogTraceHitag(tx,*txlen,0,0,true); if(tag.crypto_active) { hitag2_cipher_transcrypt(&(tag.cs), tx, *txlen/8, *txlen%8); @@ -531,12 +551,17 @@ bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { } else { // Failed reading a block, could be (read/write) locked, skip block and re-authenticate if (blocknr == 1) { + // Write the low part of the key in memory memcpy(tag.sectors[1],key+2,4); } else if (blocknr == 2) { + // Write the high part of the key in memory tag.sectors[2][0] = 0x00; tag.sectors[2][1] = 0x00; tag.sectors[2][2] = key[0]; tag.sectors[2][3] = key[1]; + } else { + // Just put zero's in the memory (of the unreadable block) + memset(tag.sectors[blocknr],0x00,4); } blocknr++; bCrypto = false; @@ -648,12 +673,19 @@ bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_ case 0: { // Stop if there is no answer while we are in crypto mode (after sending NrAr) if (bCrypto) { - Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]); + Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed, removed entry!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]); + + // Removing failed entry from authentiations table + memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8); + auth_table_len -= 8; + + // Return if we reached the end of the authentiactions table bCrypto = false; - if ((auth_table_pos+8) == auth_table_len) { + if (auth_table_pos == auth_table_len) { return false; } - auth_table_pos += 8; + + // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry) memcpy(NrAr,auth_table+auth_table_pos,8); } *txlen = 5; @@ -711,6 +743,7 @@ void SnoopHitag(uint32_t type) { // Set up eavesdropping mode, frequency divisor which will drive the FPGA // and analog mux selection. + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz SetAdcMuxFor(GPIO_MUXSEL_LOPKD); @@ -848,7 +881,7 @@ void SnoopHitag(uint32_t type) { // Check if frame was captured if(rxlen > 0) { frame_count++; - if (!LogTrace(rx,nbytes(rxlen),response,0,reader_frame)) { + if (!LogTraceHitag(rx,rxlen,response,0,reader_frame)) { DbpString("Trace full"); break; } @@ -934,6 +967,7 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) { // Set up simulator mode, frequency divisor which will drive the FPGA // and analog mux selection. + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz SetAdcMuxFor(GPIO_MUXSEL_LOPKD); @@ -1011,7 +1045,7 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) { if(rxlen > 4) { frame_count++; if (!bQuiet) { - if (!LogTrace(rx,nbytes(rxlen),response,0,true)) { + if (!LogTraceHitag(rx,rxlen,response,0,true)) { DbpString("Trace full"); if (bQuitTraceFull) { break; @@ -1040,7 +1074,7 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) { hitag_send_frame(tx,txlen); // Store the frame in the trace if (!bQuiet) { - if (!LogTrace(tx,nbytes(txlen),0,0,false)) { + if (!LogTraceHitag(tx,txlen,0,0,false)) { DbpString("Trace full"); if (bQuitTraceFull) { break; @@ -1092,6 +1126,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { bool bStop; bool bQuitTraceFull = false; + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); // Reset the return status bSuccessful = false; @@ -1105,7 +1140,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { case RHT2F_PASSWORD: { Dbprintf("List identifier in password mode"); memcpy(password,htd->pwd.password,4); - blocknr = 0; + blocknr = 0; bQuitTraceFull = false; bQuiet = false; bPwd = false; @@ -1123,7 +1158,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { case RHT2F_CRYPTO: { DbpString("Authenticating using key:"); - memcpy(key,htd->crypto.key,6); + memcpy(key,htd->crypto.key,4); Dbhexdump(6,key,false); blocknr = 0; bQuiet = false; @@ -1221,7 +1256,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { if(rxlen > 0) { frame_count++; if (!bQuiet) { - if (!LogTrace(rx,nbytes(rxlen),response,0,false)) { + if (!LogTraceHitag(rx,rxlen,response,0,false)) { DbpString("Trace full"); if (bQuitTraceFull) { break; @@ -1275,7 +1310,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { frame_count++; if (!bQuiet) { // Store the frame in the trace - if (!LogTrace(tx,nbytes(txlen),HITAG_T_WAIT_2,0,true)) { + if (!LogTraceHitag(tx,txlen,HITAG_T_WAIT_2,0,true)) { if (bQuitTraceFull) { break; } else {