Update lfops.c

moved wakeup and reset to call T55xx_SendCMD.  Small code improvements

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 95fa9e7cd47d1e427b16a0408106d067a6165eb0..16a46910837154d8a7bb611da093e2c9866075fd 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -1274,8 +1274,8 @@ T55xx_Timing T55xx_Timing_1of4     = { 31 * 8   , 20 * 8   , 18 * 8 , 34 * 8 , 5
 #define T55xx_DLMode_1of4                 3 // 1 of 4
 #define T55xx_LongLeadingReference 4 // Value to tell Write Bit to send long reference
 // Macro for code readability
 #define T55xx_DLMode_1of4                 3 // 1 of 4
 #define T55xx_LongLeadingReference 4 // Value to tell Write Bit to send long reference
 // Macro for code readability

-#define BitStream_Byte(X) ((X) / 8)
-#define BitStream_Bit(X) ((X) - ((X) / 8) * 8)
+#define BitStream_Byte(X) ((X) >> 3)
+#define BitStream_Bit(X)  ((X) &  7)  

 
 
 void TurnReadLFOn(int delay) {
 
 
 void TurnReadLFOn(int delay) {


@@ -1288,7 +1288,7 @@ void TurnReadLFOn(int delay) {
 void T55xxWriteBit(int bit, T55xx_Timing *Timings) {
 
        // If bit = 4 Send Long Leading Reference which is 138 + WRITE_0        
 void T55xxWriteBit(int bit, T55xx_Timing *Timings) {
 
        // If bit = 4 Send Long Leading Reference which is 138 + WRITE_0        

-
+   // Dbprintf ("Bits : %d",bit);

        switch (bit){
                case 0 : TurnReadLFOn(Timings->WRITE_0);             break; // Send bit  0/00
                case 1 : TurnReadLFOn(Timings->WRITE_1);             break; // Send bit  1/01
        switch (bit){
                case 0 : TurnReadLFOn(Timings->WRITE_0);             break; // Send bit  0/00
                case 1 : TurnReadLFOn(Timings->WRITE_1);             break; // Send bit  1/01


@@ -1324,14 +1324,16 @@ int T55xx_SetBits (uint8_t *BitStream, uint8_t start_offset, uint32_t data , uin
             NextOffset++;                                
         }
        }
             NextOffset++;                                
         }
        }

-       else
-               Dbprintf ("Too Many Bits to fit into bit buffer");
- 
+       else{
+        // Note: This should never happen unless some code changes cause it.  
+        // So short message for coders when testing.
+        Dbprintf ("T55 too many bits"); 
+    }

     return NextOffset;          
 }
 
 // Send one downlink command to the card 
     return NextOffset;          
 }
 
 // Send one downlink command to the card 

-void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { //, bool read_cmd) {//, struct T55xx_Timing *Timing) {
+void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { 

        
        /*
                arg bits
        
        /*
                arg bits


@@ -1339,16 +1341,19 @@ void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
                xxxxxx1x 0x02 Page
                xxxxx1xx 0x04 testMode
                xxx11xxx 0x18 downlink mode
                xxxxxx1x 0x02 Page
                xxxxx1xx 0x04 testMode
                xxx11xxx 0x18 downlink mode

-               xx1xxxxx 0x20 reg_readmode
+               xx1xxxxx 0x20 !reg_readmode

                x1xxxxxx 0x40 called for a read, so no data packet
                x1xxxxxx 0x40 called for a read, so no data packet

-               
+               1xxxxxxx 0x80 reset
+        

        */
        bool    PwdMode                 = ((arg & 0x01) == 0x01);
        */
        bool    PwdMode                 = ((arg & 0x01) == 0x01);

-       uint8_t Page                    =  (arg & 0x02) >> 1;
+       bool    Page                    =  (arg & 0x02);

        bool    testMode                = ((arg & 0x04) == 0x04);
        uint8_t downlink_mode   =  (arg >> 3) & 0x03;
        bool    reg_readmode    = ((arg & 0x20) == 0x20);
        bool    read_cmd                = ((arg & 0x40) == 0x40);
        bool    testMode                = ((arg & 0x04) == 0x04);
        uint8_t downlink_mode   =  (arg >> 3) & 0x03;
        bool    reg_readmode    = ((arg & 0x20) == 0x20);
        bool    read_cmd                = ((arg & 0x40) == 0x40);

+    bool    reset           =  (arg & 0x80);
+    

     uint8_t i = 0;             
        uint8_t BitStream[10];  // Max Downlink Command size ~74 bits, so 10 bytes (80 bits)
        uint8_t BitStreamLen;
     uint8_t i = 0;             
        uint8_t BitStream[10];  // Max Downlink Command size ~74 bits, so 10 bytes (80 bits)
        uint8_t BitStreamLen;


@@ -1379,29 +1384,35 @@ void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
        if (downlink_mode == T55xx_DLMode_1of4)                            
                BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); 
 
        if (downlink_mode == T55xx_DLMode_1of4)                            
                BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); 
 

-       // Add Opcode
-       if (testMode) Dbprintf("TestMODE");
-       BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 0 : 1    , 1,sizeof(BitStream));       
-       BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 1 : Page , 1,sizeof(BitStream));       
+       // Add Opcode 
+    if (reset) {
+        //  Reset : r*) 00
+            BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream)); 
+    }
+    else
+    {
+        if (testMode) Dbprintf("TestMODE");
+        BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 0 : 1    , 1,sizeof(BitStream));      
+        BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 1 : Page , 1,sizeof(BitStream));      

        
        

-       if (PwdMode) {
-               // Leading 0 and 1 of 4 00 fixed bits if passsword used         
-               if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4)) {
-                       BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); 
-                       BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); 
-               }
-               BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Pwd, 32,sizeof(BitStream)); 
-       }
-
-       // Add Lock bit 0
-       BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); 
+        if (PwdMode) {
+            // Leading 0 and 1 of 4 00 fixed bits if passsword used            
+            if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4)) {
+                BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream)); 
+            }
+            BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Pwd, 32,sizeof(BitStream)); 
+        }

 
 

-       // Add Data if a write command
-       if (!read_cmd)  BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Data, 32,sizeof(BitStream)); 
+        // Add Lock bit 0
+        if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); 

 
 

-       // Add Address
-       if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Block, 3,sizeof(BitStream)); 
+        // Add Data if a write command
+        if (!read_cmd) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Data, 32,sizeof(BitStream)); 

 
 

+        // Add Address
+        if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Block, 3,sizeof(BitStream)); 
+    }
+    

        // Send Bits to T55xx
        // Set up FPGA, 125kHz
        LFSetupFPGAForADC(95, true);
        // Send Bits to T55xx
        // Set up FPGA, 125kHz
        LFSetupFPGAForADC(95, true);


@@ -1434,6 +1445,7 @@ void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
 // Send T5577 reset command then read stream (see if we can identify the start of the stream)
 void T55xxResetRead(void) {
        LED_A_ON();
 // Send T5577 reset command then read stream (see if we can identify the start of the stream)
 void T55xxResetRead(void) {
        LED_A_ON();

+/*

        //clear buffer now so it does not interfere with timing later
        BigBuf_Clear_keep_EM();
 
        //clear buffer now so it does not interfere with timing later
        BigBuf_Clear_keep_EM();
 


@@ -1452,6 +1464,15 @@ void T55xxResetRead(void) {
        T55xxWriteBit(0,&T55xx_Timing_FixedBit);
 
        TurnReadLFOn(T55xx_Timing_FixedBit.READ_GAP);
        T55xxWriteBit(0,&T55xx_Timing_FixedBit);
 
        TurnReadLFOn(T55xx_Timing_FixedBit.READ_GAP);

+*/
+
+    //  send  r* 00 
+    uint8_t arg = 0x80;  // SendCMD will add correct reference mode based on flags (when added).
+
+    // Add in downlink_mode when ready
+    //    arg |= 0x00;  // dlmode << 3  (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 )
+
+       T55xx_SendCMD (0, 0, 0, arg); //, true);

 
        // Acquisition
        DoPartialAcquisition(0, true, BigBuf_max_traceLen(), 0);
 
        // Acquisition
        DoPartialAcquisition(0, true, BigBuf_max_traceLen(), 0);


@@ -1470,8 +1491,9 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
                xxxxxx1x 0x02 Page
                xxxxx1xx 0x04 testMode
                xxx11xxx 0x18 downlink mode
                xxxxxx1x 0x02 Page
                xxxxx1xx 0x04 testMode
                xxx11xxx 0x18 downlink mode

-               xx1xxxxx 0x20 reg_readmode
+               xx1xxxxx 0x20 !reg_readmode

                x1xxxxxx 0x40 called for a read, so no data packet
                x1xxxxxx 0x40 called for a read, so no data packet

+               1xxxxxxx 0x80 reset

        */
        
        bool    testMode                = ((arg & 0x04) == 0x04);
        */
        
        bool    testMode                = ((arg & 0x04) == 0x04);


@@ -1516,7 +1538,6 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
 }
 
 // Read one card block in page [page]
 }
 
 // Read one card block in page [page]

-//void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55xx_Timing *Timing) {

 void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55xx_Timing *Timing) {
        
        LED_A_ON();
 void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55xx_Timing *Timing) {
        
        LED_A_ON();


@@ -1527,14 +1548,15 @@ void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55
                xxxxxx1x 0x02 Page
                xxxxx1xx 0x04 testMode
                xxx11xxx 0x18 downlink mode
                xxxxxx1x 0x02 Page
                xxxxx1xx 0x04 testMode
                xxx11xxx 0x18 downlink mode

-               xx1xxxxx 0x20 reg_readmode
+               xx1xxxxx 0x20 !reg_readmode

                x1xxxxxx 0x40 called for a read, so no data packet
                x1xxxxxx 0x40 called for a read, so no data packet

+               1xxxxxxx 0x80 reset

        */
        
        // Set Read Flag to ensure SendCMD does not add "data" to the packet
        arg0 |= 0x40;
 
        */
        
        // Set Read Flag to ensure SendCMD does not add "data" to the packet
        arg0 |= 0x40;
 

-               
+       // RegRead Mode true of block 0xff      

        if (Block == 0xff) arg0 |= 0x20;
        
        //make sure block is at max 7
        if (Block == 0xff) arg0 |= 0x20;
        
        //make sure block is at max 7


@@ -1595,8 +1617,8 @@ void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55
 
 void T55xxWakeUp(uint32_t Pwd){
        LED_B_ON();
 
 void T55xxWakeUp(uint32_t Pwd){
        LED_B_ON();

+       /*

        uint32_t i = 0;
        uint32_t i = 0;

-       

        // Set up FPGA, 125kHz
        LFSetupFPGAForADC(95, true);
        StartTicks();
        // Set up FPGA, 125kHz
        LFSetupFPGAForADC(95, true);
        StartTicks();


@@ -1614,6 +1636,26 @@ void T55xxWakeUp(uint32_t Pwd){
        // Send Pwd
        for (i = 0x80000000; i != 0; i >>= 1)
                T55xxWriteBit(Pwd & i,&T55xx_Timing_FixedBit);
        // Send Pwd
        for (i = 0x80000000; i != 0; i >>= 1)
                T55xxWriteBit(Pwd & i,&T55xx_Timing_FixedBit);

+*/
+       /*
+               arg bits
+               xxxxxxx1 0x01 PwdMode
+               xxxxxx1x 0x02 Page
+               xxxxx1xx 0x04 testMode
+               xxx11xxx 0x18 downlink mode
+               xx1xxxxx 0x20 !reg_readmode 
+               x1xxxxxx 0x40 called for a read, so no data packet
+               1xxxxxxx 0x80 reset
+       */
+       
+    // r* 10 (00) <pwd>   r* for llr , L0 and 1/4 - (00) for L0 and 1/4 - All handled in SendCMD
+    // So, default Opcode 10 and pwd.
+    uint8_t arg = 0x01 | 0x40 | 0x20; //Password Read Call no data | reg_read no block
+    
+    // Add in downlink_mode when ready
+    //    arg |= 0x00;  // dlmode << 3  (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 )
+
+       T55xx_SendCMD (0, 0, Pwd, arg); //, true);

 
        // Turn and leave field on to let the begin repeating transmission
        TurnReadLFOn(20*1000);
 
        // Turn and leave field on to let the begin repeating transmission
        TurnReadLFOn(20*1000);