From: pwpiwi Date: Wed, 15 Aug 2018 12:03:20 +0000 (+0200) Subject: ISO15693 device side improvements (#652) X-Git-Tag: v3.1.0~29 X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/315e18e66cea20bd426be9b05337f53c9055e0c7?ds=sidebyside ISO15693 device side improvements (#652) * ISO15693 device side improvements * increase accuracy by doubling the sample frequency (hi_read_rx_xcorr.v) * adjust armsrc/iso15693.c and client/cmdhf15.c accordingly * use more accurate approximation for sqrt(ci^2 + cq^2) * improve EOF detection (was often mistaken for Logic0, resulting in "error, uneven octet! (extra bits!)") * hi_read_r_xcorr.v: avoid overflows during accumulation and truncation * explicitely cast unsigned ADC samples to signed --- diff --git a/armsrc/iso15693.c b/armsrc/iso15693.c index 1f0b8193..ad6f5cfc 100644 --- a/armsrc/iso15693.c +++ b/armsrc/iso15693.c @@ -81,7 +81,10 @@ #define AddCrc(data,datalen) Iso15693AddCrc(data,datalen) #define sprintUID(target,uid) Iso15693sprintUID(target,uid) -int DEBUG=0; +// approximate amplitude=sqrt(ci^2+cq^2) +#define AMPLITUDE(ci, cq) (MAX(ABS(ci), ABS(cq)) + (MIN(ABS(ci), ABS(cq))>>1)) + +static int DEBUG = 0; // --------------------------- @@ -303,13 +306,9 @@ static int GetIso15693AnswerFromTag(uint8_t *receivedResponse, int maxLen, int * // NOW READ RESPONSE FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); - //spindelay(60); // greg - experiment to get rid of some of the 0 byte/failed reads c = 0; getNext = false; for(;;) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = 0x43; - } if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { int8_t b; b = (int8_t)AT91C_BASE_SSC->SSC_RHR; @@ -319,11 +318,11 @@ static int GetIso15693AnswerFromTag(uint8_t *receivedResponse, int maxLen, int * // every other is Q. We just want power, so abs(I) + abs(Q) is // close to what we want. if(getNext) { - uint8_t r = ABS(b) + ABS(prev); + uint8_t r = AMPLITUDE(b, prev); - dest[c++] = (uint8_t)r; + dest[c++] = r; - if(c >= 2000) { + if(c >= 4000) { break; } } else { @@ -341,12 +340,10 @@ static int GetIso15693AnswerFromTag(uint8_t *receivedResponse, int maxLen, int * int i, j; int max = 0, maxPos=0; - int skip = 4; - - // if(GraphTraceLen < 1000) return; // THIS CHECKS FOR A BUFFER TO SMALL + int skip = 2; // First, correlate for SOF - for(i = 0; i < 100; i++) { + for(i = 0; i < 200; i++) { // usually, SOF is found around i = 60 int corr = 0; for(j = 0; j < arraylen(FrameSOF); j += skip) { corr += FrameSOF[j]*dest[i+(j/skip)]; @@ -356,7 +353,7 @@ static int GetIso15693AnswerFromTag(uint8_t *receivedResponse, int maxLen, int * maxPos = i; } } - // Dbprintf("SOF at %d, correlation %d", maxPos,max/(arraylen(FrameSOF)/skip)); + if (DEBUG) Dbprintf("SOF at %d, correlation %d", maxPos, max/(arraylen(FrameSOF)/skip)); int k = 0; // this will be our return value @@ -370,10 +367,15 @@ static int GetIso15693AnswerFromTag(uint8_t *receivedResponse, int maxLen, int * memset(outBuf, 0, sizeof(outBuf)); uint8_t mask = 0x01; for(;;) { - int corr0 = 0, corr1 = 0, corrEOF = 0; + int corr0 = 0, corr00 = 0, corr01 = 0, corr1 = 0, corrEOF = 0; for(j = 0; j < arraylen(Logic0); j += skip) { corr0 += Logic0[j]*dest[i+(j/skip)]; } + corr01 = corr00 = corr0; + for(j = 0; j < arraylen(Logic0); j += skip) { + corr00 += Logic0[j]*dest[i+arraylen(Logic0)/skip+(j/skip)]; + corr01 += Logic1[j]*dest[i+arraylen(Logic0)/skip+(j/skip)]; + } for(j = 0; j < arraylen(Logic1); j += skip) { corr1 += Logic1[j]*dest[i+(j/skip)]; } @@ -381,11 +383,14 @@ static int GetIso15693AnswerFromTag(uint8_t *receivedResponse, int maxLen, int * corrEOF += FrameEOF[j]*dest[i+(j/skip)]; } // Even things out by the length of the target waveform. + corr00 *= 2; + corr01 *= 2; corr0 *= 4; corr1 *= 4; - if(corrEOF > corr1 && corrEOF > corr0) { - // Dbprintf("EOF at %d", i); + if(corrEOF > corr1 && corrEOF > corr00 && corrEOF > corr01) { + if (DEBUG) Dbprintf("EOF at %d, correlation %d (corr01: %d, corr00: %d, corr1: %d, corr0: %d)", + i, corrEOF, corr01, corr00, corr1, corr0); break; } else if(corr1 > corr0) { i += arraylen(Logic1)/skip; @@ -398,7 +403,7 @@ static int GetIso15693AnswerFromTag(uint8_t *receivedResponse, int maxLen, int * k++; mask = 0x01; } - if((i+(int)arraylen(FrameEOF)) >= 2000) { + if((i+(int)arraylen(FrameEOF)/skip) >= 4000) { DbpString("ran off end!"); break; } @@ -446,9 +451,6 @@ static int GetIso15693AnswerFromSniff(uint8_t *receivedResponse, int maxLen, int c = 0; getNext = false; for(;;) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = 0x43; - } if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { int8_t b = (int8_t)AT91C_BASE_SSC->SSC_RHR; @@ -457,11 +459,11 @@ static int GetIso15693AnswerFromSniff(uint8_t *receivedResponse, int maxLen, int // every other is Q. We just want power, so abs(I) + abs(Q) is // close to what we want. if(getNext) { - uint8_t r = ABS(b) + ABS(prev); + uint8_t r = AMPLITUDE(b, prev); - dest[c++] = (uint8_t)r; + dest[c++] = r; - if(c >= 20000) { + if(c >= BIGBUF_SIZE) { break; } } else { @@ -479,12 +481,10 @@ static int GetIso15693AnswerFromSniff(uint8_t *receivedResponse, int maxLen, int int i, j; int max = 0, maxPos=0; - int skip = 4; - -// if(GraphTraceLen < 1000) return; // THIS CHECKS FOR A BUFFER TO SMALL + int skip = 2; // First, correlate for SOF - for(i = 0; i < 19000; i++) { + for(i = 0; i < 38000; i++) { int corr = 0; for(j = 0; j < arraylen(FrameSOF); j += skip) { corr += FrameSOF[j]*dest[i+(j/skip)]; @@ -494,7 +494,7 @@ static int GetIso15693AnswerFromSniff(uint8_t *receivedResponse, int maxLen, int maxPos = i; } } -// DbpString("SOF at %d, correlation %d", maxPos,max/(arraylen(FrameSOF)/skip)); + if (DEBUG) Dbprintf("SOF at %d, correlation %d", maxPos,max/(arraylen(FrameSOF)/skip)); int k = 0; // this will be our return value @@ -508,10 +508,15 @@ static int GetIso15693AnswerFromSniff(uint8_t *receivedResponse, int maxLen, int memset(outBuf, 0, sizeof(outBuf)); uint8_t mask = 0x01; for(;;) { - int corr0 = 0, corr1 = 0, corrEOF = 0; + int corr0 = 0, corr00 = 0, corr01 = 0, corr1 = 0, corrEOF = 0; for(j = 0; j < arraylen(Logic0); j += skip) { corr0 += Logic0[j]*dest[i+(j/skip)]; } + corr01 = corr00 = corr0; + for(j = 0; j < arraylen(Logic0); j += skip) { + corr00 += Logic0[j]*dest[i+arraylen(Logic0)/skip+(j/skip)]; + corr01 += Logic1[j]*dest[i+arraylen(Logic0)/skip+(j/skip)]; + } for(j = 0; j < arraylen(Logic1); j += skip) { corr1 += Logic1[j]*dest[i+(j/skip)]; } @@ -519,11 +524,14 @@ static int GetIso15693AnswerFromSniff(uint8_t *receivedResponse, int maxLen, int corrEOF += FrameEOF[j]*dest[i+(j/skip)]; } // Even things out by the length of the target waveform. + corr00 *= 2; + corr01 *= 2; corr0 *= 4; corr1 *= 4; - if(corrEOF > corr1 && corrEOF > corr0) { - // DbpString("EOF at %d", i); + if(corrEOF > corr1 && corrEOF > corr00 && corrEOF > corr01) { + if (DEBUG) Dbprintf("EOF at %d, correlation %d (corr01: %d, corr00: %d, corr1: %d, corr0: %d)", + i, corrEOF, corr01, corr00, corr1, corr0); break; } else if(corr1 > corr0) { i += arraylen(Logic1)/skip; @@ -536,7 +544,7 @@ static int GetIso15693AnswerFromSniff(uint8_t *receivedResponse, int maxLen, int k++; mask = 0x01; } - if((i+(int)arraylen(FrameEOF)) >= 2000) { + if((i+(int)arraylen(FrameEOF)/skip) >= BIGBUF_SIZE) { DbpString("ran off end!"); break; } @@ -602,10 +610,6 @@ void AcquireRawAdcSamplesIso15693(void) break; } } - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { - volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR; - (void)r; - } WDT_HIT(); } @@ -614,9 +618,6 @@ void AcquireRawAdcSamplesIso15693(void) c = 0; getNext = false; for(;;) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = 0x43; - } if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { int8_t b; b = (int8_t)AT91C_BASE_SSC->SSC_RHR; @@ -626,11 +627,11 @@ void AcquireRawAdcSamplesIso15693(void) // every other is Q. We just want power, so abs(I) + abs(Q) is // close to what we want. if(getNext) { - uint8_t r = ABS(b) + ABS(prev); + uint8_t r = AMPLITUDE(b, prev); - dest[c++] = (uint8_t)r; + dest[c++] = r; - if(c >= 2000) { + if(c >= 4000) { break; } } else { @@ -668,9 +669,6 @@ void RecordRawAdcSamplesIso15693(void) c = 0; getNext = false; for(;;) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = 0x43; - } if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { int8_t b; b = (int8_t)AT91C_BASE_SSC->SSC_RHR; @@ -680,11 +678,11 @@ void RecordRawAdcSamplesIso15693(void) // every other is Q. We just want power, so abs(I) + abs(Q) is // close to what we want. if(getNext) { - uint8_t r = ABS(b) + ABS(prev); + uint8_t r = AMPLITUDE(b, prev); - dest[c++] = (uint8_t)r; + dest[c++] = r; - if(c >= 7000) { + if(c >= 14000) { break; } } else { @@ -836,7 +834,7 @@ int SendDataTag(uint8_t *send, int sendlen, int init, int speed, uint8_t **recv) if (init) Iso15693InitReader(); int answerLen=0; - uint8_t *answer = BigBuf_get_addr() + 3660; + uint8_t *answer = BigBuf_get_addr() + 4000; if (recv != NULL) memset(answer, 0, 100); if (!speed) { @@ -957,7 +955,7 @@ void ReaderIso15693(uint32_t parameter) int answerLen1 = 0; int answerLen2 = 0; - int answerLen3 = 0; + // int answerLen3 = 0; int i = 0; int samples = 0; int tsamples = 0; @@ -967,11 +965,11 @@ void ReaderIso15693(uint32_t parameter) FpgaDownloadAndGo(FPGA_BITSTREAM_HF); - uint8_t *answer1 = BigBuf_get_addr() + 3660; - uint8_t *answer2 = BigBuf_get_addr() + 3760; - uint8_t *answer3 = BigBuf_get_addr() + 3860; + uint8_t *answer1 = BigBuf_get_addr() + 4000; + uint8_t *answer2 = BigBuf_get_addr() + 4100; + // uint8_t *answer3 = BigBuf_get_addr() + 4200; // Blank arrays - memset(answer1, 0x00, 300); + memset(answer1, 0x00, 200); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); // Setup SSC @@ -1025,21 +1023,21 @@ void ReaderIso15693(uint32_t parameter) TagUID[3],TagUID[2],TagUID[1],TagUID[0]); - Dbprintf("%d octets read from SELECT request:", answerLen2); - DbdecodeIso15693Answer(answerLen2,answer2); - Dbhexdump(answerLen2,answer2,true); + // Dbprintf("%d octets read from SELECT request:", answerLen2); + // DbdecodeIso15693Answer(answerLen2,answer2); + // Dbhexdump(answerLen2,answer2,true); - Dbprintf("%d octets read from XXX request:", answerLen3); - DbdecodeIso15693Answer(answerLen3,answer3); - Dbhexdump(answerLen3,answer3,true); + // Dbprintf("%d octets read from XXX request:", answerLen3); + // DbdecodeIso15693Answer(answerLen3,answer3); + // Dbhexdump(answerLen3,answer3,true); // read all pages if (answerLen1>=12 && DEBUG) { i=0; while (i<32) { // sanity check, assume max 32 pages BuildReadBlockRequest(TagUID,i); - TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait); - answerLen2 = GetIso15693AnswerFromTag(answer2, 100, &samples, &elapsed); + TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait); + answerLen2 = GetIso15693AnswerFromTag(answer2, 100, &samples, &elapsed); if (answerLen2>0) { Dbprintf("READ SINGLE BLOCK %d returned %d octets:",i,answerLen2); DbdecodeIso15693Answer(answerLen2,answer2); @@ -1073,7 +1071,7 @@ void SimTagIso15693(uint32_t parameter, uint8_t *uid) FpgaDownloadAndGo(FPGA_BITSTREAM_HF); - uint8_t *buf = BigBuf_get_addr() + 3660; + uint8_t *buf = BigBuf_get_addr() + 4000; memset(buf, 0x00, 100); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); @@ -1177,7 +1175,7 @@ void DirectTag15693Command(uint32_t datalen,uint32_t speed, uint32_t recv, uint8 if (recv) { LED_B_ON(); - cmd_send(CMD_ACK,recvlen>48?48:recvlen,0,0,recvbuf,48); + cmd_send(CMD_ACK,recvlen>48?48:recvlen,0,0,recvbuf,48); LED_B_OFF(); if (DEBUG) { diff --git a/client/cmdhf15.c b/client/cmdhf15.c index 08cc3b15..b6a84c1c 100644 --- a/client/cmdhf15.c +++ b/client/cmdhf15.c @@ -268,7 +268,7 @@ static char* TagErrorStr(uint8_t error) { case 0x02: return "The command is not recognised"; case 0x03: return "The option is not supported."; case 0x0f: return "Unknown error."; - case 0x10: return "The specified block is not available (doesn’t exist)."; + case 0x10: return "The specified block is not available (doesn't exist)."; case 0x11: return "The specified block is already -locked and thus cannot be locked again"; case 0x12: return "The specified block is locked and its content cannot be changed."; case 0x13: return "The specified block was not successfully programmed."; @@ -286,12 +286,12 @@ int CmdHF15Demod(const char *Cmd) int i, j; int max = 0, maxPos = 0; - int skip = 4; + int skip = 2; - if (GraphTraceLen < 1000) return 0; + if (GraphTraceLen < 2000) return 0; // First, correlate for SOF - for (i = 0; i < 100; i++) { + for (i = 0; i < 200; i++) { int corr = 0; for (j = 0; j < arraylen(FrameSOF); j += skip) { corr += FrameSOF[j] * GraphBuffer[i + (j / skip)]; @@ -310,23 +310,30 @@ int CmdHF15Demod(const char *Cmd) memset(outBuf, 0, sizeof(outBuf)); uint8_t mask = 0x01; for (;;) { - int corr0 = 0, corr1 = 0, corrEOF = 0; - for (j = 0; j < arraylen(Logic0); j += skip) { - corr0 += Logic0[j] * GraphBuffer[i + (j / skip)]; - } - for (j = 0; j < arraylen(Logic1); j += skip) { - corr1 += Logic1[j] * GraphBuffer[i + (j / skip)]; - } - for (j = 0; j < arraylen(FrameEOF); j += skip) { - corrEOF += FrameEOF[j] * GraphBuffer[i + (j / skip)]; - } - // Even things out by the length of the target waveform. - corr0 *= 4; - corr1 *= 4; - - if (corrEOF > corr1 && corrEOF > corr0) { - PrintAndLog("EOF at %d", i); - break; + int corr0 = 0, corr00 = 0, corr01 = 0, corr1 = 0, corrEOF = 0; + for(j = 0; j < arraylen(Logic0); j += skip) { + corr0 += Logic0[j]*GraphBuffer[i+(j/skip)]; + } + corr01 = corr00 = corr0; + for(j = 0; j < arraylen(Logic0); j += skip) { + corr00 += Logic0[j]*GraphBuffer[i+arraylen(Logic0)/skip+(j/skip)]; + corr01 += Logic1[j]*GraphBuffer[i+arraylen(Logic0)/skip+(j/skip)]; + } + for(j = 0; j < arraylen(Logic1); j += skip) { + corr1 += Logic1[j]*GraphBuffer[i+(j/skip)]; + } + for(j = 0; j < arraylen(FrameEOF); j += skip) { + corrEOF += FrameEOF[j]*GraphBuffer[i+(j/skip)]; + } + // Even things out by the length of the target waveform. + corr00 *= 2; + corr01 *= 2; + corr0 *= 4; + corr1 *= 4; + + if(corrEOF > corr1 && corrEOF > corr00 && corrEOF > corr01) { + PrintAndLog("EOF at %d", i); + break; } else if (corr1 > corr0) { i += arraylen(Logic1) / skip; outBuf[k] |= mask; diff --git a/fpga/fpga_hf.bit b/fpga/fpga_hf.bit index 229151df..939ba93a 100644 Binary files a/fpga/fpga_hf.bit and b/fpga/fpga_hf.bit differ diff --git a/fpga/hi_read_rx_xcorr.v b/fpga/hi_read_rx_xcorr.v index 433d6736..f637abf2 100644 --- a/fpga/hi_read_rx_xcorr.v +++ b/fpga/hi_read_rx_xcorr.v @@ -27,22 +27,12 @@ assign pwr_hi = ck_1356megb & (~snoop); assign pwr_oe1 = 1'b0; assign pwr_oe3 = 1'b0; assign pwr_oe4 = 1'b0; +// Unused. +assign pwr_lo = 1'b0; +assign pwr_oe2 = 1'b0; + +assign adc_clk = ck_1356megb; // sample frequency is 13,56 MHz -reg [2:0] fc_div; -always @(negedge ck_1356megb) - fc_div <= fc_div + 1; - -(* clock_signal = "yes" *) reg adc_clk; // sample frequency, always 16 * fc -always @(ck_1356megb, xcorr_is_848, xcorr_quarter_freq, fc_div) - if (xcorr_is_848 & ~xcorr_quarter_freq) // fc = 847.5 kHz, standard ISO14443B - adc_clk <= ck_1356megb; - else if (~xcorr_is_848 & ~xcorr_quarter_freq) // fc = 423.75 kHz - adc_clk <= fc_div[0]; - else if (xcorr_is_848 & xcorr_quarter_freq) // fc = 211.875 kHz - adc_clk <= fc_div[1]; - else // fc = 105.9375 kHz - adc_clk <= fc_div[2]; - // When we're a reader, we just need to do the BPSK demod; but when we're an // eavesdropper, we also need to pick out the commands sent by the reader, // using AM. Do this the same way that we do it for the simulated tag. @@ -69,15 +59,27 @@ begin end end -// Let us report a correlation every 4 subcarrier cycles, or 4*16=64 samples, -// so we need a 6-bit counter. + +// Let us report a correlation every 64 samples. I.e. +// one Q/I pair after 4 subcarrier cycles for the 848kHz subcarrier, +// one Q/I pair after 2 subcarrier cycles for the 424kHz subcarriers, +// one Q/I pair for each subcarrier cyle for the 212kHz subcarrier. +// We need a 6-bit counter for the timing. reg [5:0] corr_i_cnt; -// And a couple of registers in which to accumulate the correlations. -// We would add at most 32 times the difference between unmodulated and modulated signal. It should +always @(negedge adc_clk) +begin + corr_i_cnt <= corr_i_cnt + 1; +end + +// And a couple of registers in which to accumulate the correlations. From the 64 samples +// we would add at most 32 times the difference between unmodulated and modulated signal. It should // be safe to assume that a tag will not be able to modulate the carrier signal by more than 25%. // 32 * 255 * 0,25 = 2040, which can be held in 11 bits. Add 1 bit for sign. -reg signed [11:0] corr_i_accum; -reg signed [11:0] corr_q_accum; +// Temporary we might need more bits. For the 212kHz subcarrier we could possible add 32 times the +// maximum signal value before a first subtraction would occur. 32 * 255 = 8160 can be held in 13 bits. +// Add one bit for sign -> need 14 bit registers but final result will fit into 12 bits. +reg signed [13:0] corr_i_accum; +reg signed [13:0] corr_q_accum; // we will report maximum 8 significant bits reg signed [7:0] corr_i_out; reg signed [7:0] corr_q_out; @@ -86,12 +88,29 @@ reg ssp_clk; reg ssp_frame; -always @(negedge adc_clk) -begin - corr_i_cnt <= corr_i_cnt + 1; -end - +// The subcarrier reference signals +reg subcarrier_I; +reg subcarrier_Q; +always @(corr_i_cnt or xcorr_is_848 or xcorr_quarter_freq) +begin + if (xcorr_is_848 & ~xcorr_quarter_freq) // 848 kHz + begin + subcarrier_I = ~corr_i_cnt[3]; + subcarrier_Q = ~(corr_i_cnt[3] ^ corr_i_cnt[2]); + end + else if (xcorr_is_848 & xcorr_quarter_freq) // 212 kHz + begin + subcarrier_I = ~corr_i_cnt[5]; + subcarrier_Q = ~(corr_i_cnt[5] ^ corr_i_cnt[4]); + end + else + begin // 424 kHz + subcarrier_I = ~corr_i_cnt[4]; + subcarrier_Q = ~(corr_i_cnt[4] ^ corr_i_cnt[3]); + end +end + // ADC data appears on the rising edge, so sample it on the falling edge always @(negedge adc_clk) begin @@ -103,36 +122,60 @@ begin if(snoop) begin // Send 7 most significant bits of tag signal (signed), plus 1 bit reader signal - corr_i_out <= {corr_i_accum[11:5], after_hysteresis_prev_prev}; - corr_q_out <= {corr_q_accum[11:5], after_hysteresis_prev}; + if (corr_i_accum[13:11] == 3'b000 || corr_i_accum[13:11] == 3'b111) + corr_i_out <= {corr_i_accum[11:5], after_hysteresis_prev_prev}; + else // truncate to maximum value + if (corr_i_accum[13] == 1'b0) + corr_i_out <= {7'b0111111, after_hysteresis_prev_prev}; + else + corr_i_out <= {7'b1000000, after_hysteresis_prev_prev}; + if (corr_q_accum[13:11] == 3'b000 || corr_q_accum[13:11] == 3'b111) + corr_q_out <= {corr_q_accum[11:5], after_hysteresis_prev}; + else // truncate to maximum value + if (corr_q_accum[13] == 1'b0) + corr_q_out <= {7'b0111111, after_hysteresis_prev}; + else + corr_q_out <= {7'b1000000, after_hysteresis_prev}; after_hysteresis_prev_prev <= after_hysteresis; end else begin - // 8 bits of tag signal - corr_i_out <= corr_i_accum[11:4]; - corr_q_out <= corr_q_accum[11:4]; + // Send 8 bits of tag signal + if (corr_i_accum[13:11] == 3'b000 || corr_i_accum[13:11] == 3'b111) + corr_i_out <= corr_i_accum[11:4]; + else // truncate to maximum value + if (corr_i_accum[13] == 1'b0) + corr_i_out <= 8'b01111111; + else + corr_i_out <= 8'b10000000; + if (corr_q_accum[13:11] == 3'b000 || corr_q_accum[13:11] == 3'b111) + corr_q_out <= corr_q_accum[11:4]; + else // truncate to maximum value + if (corr_q_accum[13] == 1'b0) + corr_q_out <= 8'b01111111; + else + corr_q_out <= 8'b10000000; end - - corr_i_accum <= adc_d; - corr_q_accum <= adc_d; + // Initialize next correlation. + // Both I and Q reference signals are high when corr_i_nct == 0. Therefore need to accumulate. + corr_i_accum <= $signed({1'b0,adc_d}); + corr_q_accum <= $signed({1'b0,adc_d}); end else begin - if(corr_i_cnt[3]) - corr_i_accum <= corr_i_accum - adc_d; + if (subcarrier_I) + corr_i_accum <= corr_i_accum + $signed({1'b0,adc_d}); else - corr_i_accum <= corr_i_accum + adc_d; + corr_i_accum <= corr_i_accum - $signed({1'b0,adc_d}); - if(corr_i_cnt[3] == corr_i_cnt[2]) // phase shifted by pi/2 - corr_q_accum <= corr_q_accum + adc_d; + if (subcarrier_Q) + corr_q_accum <= corr_q_accum + $signed({1'b0,adc_d}); else - corr_q_accum <= corr_q_accum - adc_d; + corr_q_accum <= corr_q_accum - $signed({1'b0,adc_d}); end - // The logic in hi_simulate.v reports 4 samples per bit. We report two - // (I, Q) pairs per bit, so we should do 2 samples per pair. + // for each Q/I pair report two reader signal samples when sniffing if(corr_i_cnt == 6'd32) after_hysteresis_prev <= after_hysteresis; @@ -167,8 +210,4 @@ assign ssp_din = corr_i_out[7]; assign dbg = corr_i_cnt[3]; -// Unused. -assign pwr_lo = 1'b0; -assign pwr_oe2 = 1'b0; - endmodule