From 6e98444637baaa183812fad93cd7c03d645ba95e Mon Sep 17 00:00:00 2001 From: marshmellow42 Date: Thu, 2 Apr 2015 23:55:12 -0400 Subject: [PATCH] lfdemod reduce duplicate code remove check for best start position in demods and adjust the clock detect to always return best start position to the demods also small bug fix in lf em em4x50read --- client/cmdlfem4x.c | 138 ++++++++++++++++++++--------------------- common/lfdemod.c | 150 +++++++++------------------------------------ 2 files changed, 98 insertions(+), 190 deletions(-) diff --git a/client/cmdlfem4x.c b/client/cmdlfem4x.c index 79e8a8fe..47a5ac3e 100644 --- a/client/cmdlfem4x.c +++ b/client/cmdlfem4x.c @@ -166,6 +166,74 @@ int CmdEM410xWatchnSpoof(const char *Cmd) return 0; } +int CmdEM410xWrite(const char *Cmd) +{ + uint64_t id = 0xFFFFFFFFFFFFFFFF; // invalid id value + int card = 0xFF; // invalid card value + unsigned int clock = 0; // invalid clock value + + sscanf(Cmd, "%" PRIx64 " %d %d", &id, &card, &clock); + + // Check ID + if (id == 0xFFFFFFFFFFFFFFFF) { + PrintAndLog("Error! ID is required.\n"); + return 0; + } + if (id >= 0x10000000000) { + PrintAndLog("Error! Given EM410x ID is longer than 40 bits.\n"); + return 0; + } + + // Check Card + if (card == 0xFF) { + PrintAndLog("Error! Card type required.\n"); + return 0; + } + if (card < 0) { + PrintAndLog("Error! Bad card type selected.\n"); + return 0; + } + + // Check Clock + if (card == 1) + { + // Default: 64 + if (clock == 0) + clock = 64; + + // Allowed clock rates: 16, 32 and 64 + if ((clock != 16) && (clock != 32) && (clock != 64)) { + PrintAndLog("Error! Clock rate %d not valid. Supported clock rates are 16, 32 and 64.\n", clock); + return 0; + } + } + else if (clock != 0) + { + PrintAndLog("Error! Clock rate is only supported on T55x7 tags.\n"); + return 0; + } + + if (card == 1) { + PrintAndLog("Writing %s tag with UID 0x%010" PRIx64 " (clock rate: %d)", "T55x7", id, clock); + // NOTE: We really should pass the clock in as a separate argument, but to + // provide for backwards-compatibility for older firmware, and to avoid + // having to add another argument to CMD_EM410X_WRITE_TAG, we just store + // the clock rate in bits 8-15 of the card value + card = (card & 0xFF) | (((uint64_t)clock << 8) & 0xFF00); + } + else if (card == 0) + PrintAndLog("Writing %s tag with UID 0x%010" PRIx64, "T5555", id, clock); + else { + PrintAndLog("Error! Bad card type selected.\n"); + return 0; + } + + UsbCommand c = {CMD_EM410X_WRITE_TAG, {card, (uint32_t)(id >> 32), (uint32_t)id}}; + SendCommand(&c); + + return 0; +} + bool EM_EndParityTest(uint8_t *BitStream, size_t size, uint8_t rows, uint8_t cols, uint8_t pType) { if (rows*cols>size) return false; @@ -300,7 +368,7 @@ int EM4x50Read(const char *Cmd, bool verbose) break; } } - } + } else tol = clk/8; // look for data start - should be 2 pairs of LW (pulses of clk*3,clk*2) start= -1; @@ -426,74 +494,6 @@ int CmdEM4x50Read(const char *Cmd) return EM4x50Read(Cmd, true); } -int CmdEM410xWrite(const char *Cmd) -{ - uint64_t id = 0xFFFFFFFFFFFFFFFF; // invalid id value - int card = 0xFF; // invalid card value - unsigned int clock = 0; // invalid clock value - - sscanf(Cmd, "%" PRIx64 " %d %d", &id, &card, &clock); - - // Check ID - if (id == 0xFFFFFFFFFFFFFFFF) { - PrintAndLog("Error! ID is required.\n"); - return 0; - } - if (id >= 0x10000000000) { - PrintAndLog("Error! Given EM410x ID is longer than 40 bits.\n"); - return 0; - } - - // Check Card - if (card == 0xFF) { - PrintAndLog("Error! Card type required.\n"); - return 0; - } - if (card < 0) { - PrintAndLog("Error! Bad card type selected.\n"); - return 0; - } - - // Check Clock - if (card == 1) - { - // Default: 64 - if (clock == 0) - clock = 64; - - // Allowed clock rates: 16, 32 and 64 - if ((clock != 16) && (clock != 32) && (clock != 64)) { - PrintAndLog("Error! Clock rate %d not valid. Supported clock rates are 16, 32 and 64.\n", clock); - return 0; - } - } - else if (clock != 0) - { - PrintAndLog("Error! Clock rate is only supported on T55x7 tags.\n"); - return 0; - } - - if (card == 1) { - PrintAndLog("Writing %s tag with UID 0x%010" PRIx64 " (clock rate: %d)", "T55x7", id, clock); - // NOTE: We really should pass the clock in as a separate argument, but to - // provide for backwards-compatibility for older firmware, and to avoid - // having to add another argument to CMD_EM410X_WRITE_TAG, we just store - // the clock rate in bits 8-15 of the card value - card = (card & 0xFF) | (((uint64_t)clock << 8) & 0xFF00); - } - else if (card == 0) - PrintAndLog("Writing %s tag with UID 0x%010" PRIx64, "T5555", id, clock); - else { - PrintAndLog("Error! Bad card type selected.\n"); - return 0; - } - - UsbCommand c = {CMD_EM410X_WRITE_TAG, {card, (uint32_t)(id >> 32), (uint32_t)id}}; - SendCommand(&c); - - return 0; -} - int CmdReadWord(const char *Cmd) { int Word = -1; //default to invalid word diff --git a/common/lfdemod.c b/common/lfdemod.c index df30aba4..c00222b3 100644 --- a/common/lfdemod.c +++ b/common/lfdemod.c @@ -172,7 +172,7 @@ int cleanAskRawDemod(uint8_t *BinStream, size_t *size, int clk, int invert, int int askmandemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr) { size_t i; - int start = DetectASKClock(BinStream, *size, clk, 20); //clock default + int start = DetectASKClock(BinStream, *size, clk, maxErr); //clock default if (*clk==0 || start < 0) return -3; if (*invert != 1) *invert=0; uint8_t initLoopMax = 255; @@ -188,59 +188,14 @@ int askmandemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int max return manrawdecode(BinStream, size); } - // PrintAndLog("DEBUG - valid high: %d - valid low: %d",high,low); - int lastBit = 0; //set first clock check + int lastBit; //set first clock check uint16_t bitnum = 0; //output counter uint8_t tol = 0; //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave if (*clk <= 32) tol=1; //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely - size_t iii = 0; - //if 0 errors allowed then only try first 2 clock cycles as we want a low tolerance - if (!maxErr && initLoopMax > *clk*3) initLoopMax = *clk * 3; uint16_t errCnt = 0, MaxBits = 512; - uint16_t bestStart = start; - uint16_t bestErrCnt = 0; - // PrintAndLog("DEBUG - lastbit - %d",lastBit); - // if best start position not already found by detect clock then - if (start <= 0 || start > initLoopMax){ - bestErrCnt = maxErr+1; - // loop to find first wave that works - for (iii=0; iii < initLoopMax-tol-*clk; ++iii){ - // if no peak skip - if (BinStream[iii] < high && BinStream[iii] > low) continue; - - lastBit = iii - *clk; - // loop through to see if this start location works - for (i = iii; i < *size; ++i) { - if ((i-lastBit) > (*clk-tol) && (BinStream[i] >= high || BinStream[i] <= low)) { - lastBit += *clk; - } else if ((i-lastBit) > (*clk+tol)) { - errCnt++; - lastBit += *clk; - } - if ((i-iii) > (MaxBits * *clk) || errCnt > maxErr) break; //got plenty of bits or too many errors - } - //we got more than 64 good bits and not all errors - if ((((i-iii)/ *clk) > (32)) && (errCnt<=maxErr)) { - //possible good read - if (!errCnt || errCnt < bestErrCnt){ - bestStart = iii; //set this as new best run - bestErrCnt = errCnt; - if (!errCnt) break; //great read - finish - } - } - errCnt = 0; - } - } - if (bestErrCnt > maxErr){ - *invert = bestStart; - *clk = iii; - return -1; - } - //best run is good enough set to best run and set overwrite BinStream - lastBit = bestStart - *clk; - errCnt = 0; - for (i = bestStart; i < *size; ++i) { + lastBit = start - *clk; + for (i = start; i < *size; ++i) { if ((BinStream[i] >= high) && ((i-lastBit) > (*clk-tol))){ //high found and we are expecting a bar lastBit += *clk; @@ -261,7 +216,7 @@ int askmandemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int max if (bitnum >= MaxBits) break; } *size = bitnum; - return bestErrCnt; + return errCnt; } //by marshmellow @@ -381,13 +336,13 @@ void askAmp(uint8_t *BitStream, size_t size) int askrawdemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr, uint8_t amp) { if (*size==0) return -1; - int start = DetectASKClock(BinStream, *size, clk, 20); //clock default + int start = DetectASKClock(BinStream, *size, clk, maxErr); //clock default if (*clk==0 || start < 0) return -1; if (*invert != 1) *invert = 0; if (amp==1) askAmp(BinStream, *size); uint8_t initLoopMax = 255; - if (initLoopMax > *size) initLoopMax=*size; + if (initLoopMax > *size) initLoopMax = *size; // Detect high and lows //25% clip in case highs and lows aren't clipped [marshmellow] int high, low; @@ -398,67 +353,13 @@ int askrawdemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int max if (DetectCleanAskWave(BinStream, *size, high, low)) return cleanAskRawDemod(BinStream, size, *clk, *invert, high, low); - int lastBit = 0; //set first clock check - can go negative - size_t i, iii = 0; - size_t errCnt = 0, bitnum = 0; //output counter + int lastBit; //set first clock check - can go negative + size_t i, errCnt = 0, bitnum = 0; //output counter uint8_t midBit = 0; - size_t bestStart = start, bestErrCnt = 0; //(*size/1000); size_t MaxBits = 1024; + lastBit = start - *clk; - //if 0 errors allowed then only try first 2 clock cycles as we want a low tolerance - if (!maxErr && initLoopMax > *clk*3) initLoopMax = *clk * 3; - //if best start not already found by detectclock - if (start <= 0 || start > initLoopMax){ - bestErrCnt = maxErr+1; - //PrintAndLog("DEBUG - lastbit - %d",lastBit); - //loop to find first wave that works - for (iii=0; iii < initLoopMax - *clk; ++iii){ - if ((BinStream[iii] >= high) || (BinStream[iii] <= low)){ - lastBit = iii - *clk; - //loop through to see if this start location works - for (i = iii; i < *size; ++i) { - if (i-lastBit > *clk && (BinStream[i] >= high || BinStream[i] <= low)){ - lastBit += *clk; - midBit = 0; - } else if (i-lastBit > (*clk/2) && midBit == 0) { - midBit = 1; - } else if ((i-lastBit) > *clk) { - //should have hit a high or low based on clock!! - //PrintAndLog("DEBUG - no wave in expected area - location: %d, expected: %d-%d, lastBit: %d - resetting search",i,(lastBit+(clk-((int)(tol)))),(lastBit+(clk+((int)(tol)))),lastBit); - errCnt++; - lastBit += *clk;//skip over until hit too many errors - if (errCnt > maxErr) - break; - } - if ((i-iii)>(MaxBits * *clk)) break; //got enough bits - } - //we got more than 32 good bits and not all errors - if ((((i-iii)/ *clk) > 32) && (errCnt<=maxErr)) { - //possible good read - if (errCnt==0){ - bestStart=iii; - bestErrCnt=errCnt; - break; //great read - finish - } - if (errCnt maxErr){ - *invert = bestStart; - *clk = iii; - return -1; - } - //best run is good enough - set to best run and overwrite BinStream - lastBit = bestStart - *clk - 1; - errCnt = 0; - - for (i = bestStart; i < *size; ++i) { + for (i = start; i < *size; ++i) { if (i - lastBit > *clk){ if (BinStream[i] >= high) { BinStream[bitnum++] = *invert; @@ -861,15 +762,17 @@ int DetectStrongAskClock(uint8_t dest[], size_t size) // return start index of best starting position for that clock and return clock (by reference) int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr) { - size_t i=0; - uint8_t clk[]={8,16,32,40,50,64,100,128,255}; + size_t i=1; + uint8_t clk[]={255,8,16,32,40,50,64,100,128,255}; uint8_t loopCnt = 255; //don't need to loop through entire array... if (size==0) return -1; if (size <= loopCnt) loopCnt = size-1; //not enough samples - //if we already have a valid clock quit - - for (;i<8;++i) - if (clk[i] == *clock) return 0; + + //if we already have a valid clock + uint8_t clockFnd=0; + for (;i<9;++i) + if (clk[i] == *clock) clockFnd=i; + //clock found but continue to find best startpos //get high and low peak int peak, low; @@ -878,10 +781,11 @@ int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr) //test for large clean peaks if (DetectCleanAskWave(dest, size, peak, low)==1){ int ans = DetectStrongAskClock(dest, size); - for (i=7; i>0; i--){ + for (i=8; i>1; i--){ if (clk[i] == ans) { *clock = ans; - return 0; + clockFnd = i; + break; //clock found but continue to find best startpos } } } @@ -892,15 +796,19 @@ int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr) size_t errCnt = 0; size_t arrLoc, loopEnd; //test each valid clock from smallest to greatest to see which lines up - for(clkCnt=0; clkCnt < 8; clkCnt++){ + uint8_t clkEnd=9; + if (clockFnd>0) clkEnd=clockFnd+1; + else clockFnd=1; + + for(clkCnt=clockFnd; clkCnt < clkEnd; clkCnt++){ if (clk[clkCnt] == 32){ tol=1; }else{ tol=0; } - if (!maxErr && loopCnt>clk[clkCnt]*2) loopCnt=clk[clkCnt]*2; + if (!maxErr && loopCnt>clk[clkCnt]*3) loopCnt=clk[clkCnt]*3; bestErr[clkCnt]=1000; - //try lining up the peaks by moving starting point (try first 256) + //try lining up the peaks by moving starting point (try first few clocks) for (ii=0; ii < loopCnt-tol-clk[clkCnt]; ii++){ if (dest[ii] < peak && dest[ii] > low) continue; -- 2.39.2