+++ /dev/null
--- $Id: SER_PAR_CON.vhd,v 1.1 2007-03-10 11:24:03 sithglan Exp $\r
-\r
-library ieee;\r
-use ieee.std_logic_1164.all;\r
-use ieee.std_logic_unsigned.all;\r
-\r
-entity SER_PAR_CON is\r
- port\r
- (\r
- PCI_CLOCK :in std_logic; \r
- RESET :in std_logic; \r
- SPC_ENABLE :in std_logic; -- Driver Enable Sender/Receiver\r
- SYNC_R_FIFO_FFn :in std_logic; -- FIFO Full Flag (low active)\r
- SERIAL_IN :in std_logic; -- Serial Input\r
- R_FIFO_WRITEn :out std_logic; -- FIFO Write (low active)\r
- SPC_RDY_OUT :out std_logic; -- Ready to Receive Data\r
- PAR_OUT :out std_logic_vector(7 downto 0)\r
- );\r
-end entity SER_PAR_CON ;\r
-\r
-\r
-architecture SER_PAR_CON_DESIGN of SER_PAR_CON is\r
-\r
--- constant STATE_RECV :std_logic_vector(3 downto 0) := "0001";\r
-constant STATE_RECV_START_BIT :std_logic_vector(3 downto 0) := "0010";\r
-constant STATE_RECV_BIT_0 :std_logic_vector(3 downto 0) := "0011";\r
-constant STATE_RECV_BIT_1 :std_logic_vector(3 downto 0) := "0100";\r
-constant STATE_RECV_BIT_2 :std_logic_vector(3 downto 0) := "0101";\r
-constant STATE_RECV_BIT_3 :std_logic_vector(3 downto 0) := "0110";\r
-constant STATE_RECV_BIT_4 :std_logic_vector(3 downto 0) := "0111";\r
-constant STATE_RECV_BIT_5 :std_logic_vector(3 downto 0) := "1000";\r
-constant STATE_RECV_BIT_6 :std_logic_vector(3 downto 0) := "1001";\r
-constant STATE_RECV_BIT_7 :std_logic_vector(3 downto 0) := "1010";\r
-constant STATE_RECV_FIFOFULL :std_logic_vector(3 downto 0) := "1011";\r
-\r
-signal COUNT :std_logic_vector (3 downto 0);\r
-signal STATE :std_logic_vector (3 downto 0);\r
-signal STARTBIT :std_logic_vector (3 downto 0);\r
-\r
-\r
-attribute syn_state_machine:boolean;\r
-attribute syn_state_machine of STATE: signal is false;\r
-attribute syn_state_machine of COUNT: signal is false;\r
-\r
-begin\r
-\r
-process(PCI_CLOCK)\r
-begin\r
- if (PCI_CLOCK'event and PCI_CLOCK = '1') then\r
- if ("0000" < COUNT) then\r
- COUNT <= COUNT - 1;\r
- end if;\r
-\r
--- war nicht das Problem des Datenverlusts\r
--- if (R_FIFO_WRITEn = '0' and COUNT = "0000") then\r
--- R_FIFO_WRITEn <= '1';\r
---- end if;\r
-\r
- if (RESET = '1') then\r
- STATE <= STATE_RECV_START_BIT;\r
- COUNT <= "0000";\r
- R_FIFO_WRITEn <= '1';\r
-\r
- elsif (SPC_ENABLE = '1') then\r
- \r
- if (STATE = STATE_RECV_START_BIT) then\r
- R_FIFO_WRITEn <= '1';\r
- if (STARTBIT = "0011") then\r
- COUNT <= "0011";\r
- STATE <= STATE_RECV_BIT_0;\r
- end if;\r
-\r
- elsif (STATE = STATE_RECV_FIFOFULL) then\r
- if (SYNC_R_FIFO_FFn = '1') then\r
- R_FIFO_WRITEn <= '0';\r
- STATE <= STATE_RECV_START_BIT;\r
- end if;\r
-\r
- elsif (COUNT = "0000") then\r
- COUNT <= "0011";\r
- case STATE is\r
- \r
- when STATE_RECV_BIT_0 =>\r
- PAR_OUT(0) <= STARTBIT(0);\r
- STATE <= STATE_RECV_BIT_1;\r
-\r
- when STATE_RECV_BIT_1 =>\r
- PAR_OUT(1) <= STARTBIT(0);\r
- STATE <= STATE_RECV_BIT_2;\r
- \r
- when STATE_RECV_BIT_2 =>\r
- PAR_OUT(2) <= STARTBIT(0);\r
- STATE <= STATE_RECV_BIT_3;\r
- \r
- when STATE_RECV_BIT_3 =>\r
- PAR_OUT(3) <= STARTBIT(0);\r
- STATE <= STATE_RECV_BIT_4;\r
- \r
- when STATE_RECV_BIT_4 =>\r
- PAR_OUT(4) <= STARTBIT(0);\r
- STATE <= STATE_RECV_BIT_5;\r
- \r
- when STATE_RECV_BIT_5 =>\r
- PAR_OUT(5) <= STARTBIT(0);\r
- STATE <= STATE_RECV_BIT_6;\r
- \r
- when STATE_RECV_BIT_6 =>\r
- PAR_OUT(6) <= STARTBIT(0);\r
- STATE <= STATE_RECV_BIT_7;\r
- \r
- when STATE_RECV_BIT_7 =>\r
- PAR_OUT(7) <= STARTBIT(0);\r
-\r
- if (SYNC_R_FIFO_FFn = '1') then\r
- STATE <= STATE_RECV_START_BIT;\r
- R_FIFO_WRITEn <= '0';\r
- else \r
- STATE <= STATE_RECV_FIFOFULL;\r
- end if;\r
-\r
- when others =>\r
- STATE <= STATE_RECV_START_BIT;\r
-\r
- end case;\r
- end if; -- COUNT\r
- end if; -- RESET ... / SPC_ENABLE ...\r
- end if; -- PCI_CLOCK ...\r
-end process;\r
-\r
-process(PCI_CLOCK)\r
-begin\r
- if (PCI_CLOCK'event and PCI_CLOCK = '1') then\r
- SPC_RDY_OUT <= SPC_ENABLE AND SYNC_R_FIFO_FFn;\r
- end if;\r
-end process;\r
-\r
-\r
-process(PCI_CLOCK)\r
-begin\r
- if (PCI_CLOCK'event and PCI_CLOCK = '1') then\r
- if (RESET = '1') then\r
- STARTBIT <= "0000";\r
- else\r
- STARTBIT(0) <= SERIAL_IN;\r
- STARTBIT(1) <= STARTBIT(0);\r
- STARTBIT(2) <= STARTBIT(1);\r
- STARTBIT(3) <= STARTBIT(2);\r
- end if; \r
- end if;\r
-end process;\r
-\r
-\r
-\r
-end architecture SER_PAR_CON_DESIGN;\r
projects / raggedstone / blobdiff