X-Git-Url: http://git.zerfleddert.de/cgi-bin/gitweb.cgi/raggedstone/blobdiff_plain/3c76f814e51b2574a0cdc5dc3dc5710f31fbc443..11b038c295a0c1c9a2753ad8cdb6da0480ebc1dc:/dhwk/source/pci/config_wr_0.vhd

diff --git a/dhwk/source/pci/config_wr_0.vhd b/dhwk/source/pci/config_wr_0.vhd
new file mode 100644
index 0000000..9e1e2dc
--- /dev/null
+++ b/dhwk/source/pci/config_wr_0.vhd
@@ -0,0 +1,140 @@
+-- J.STELZNER
+-- INFORMATIK-3 LABOR
+-- 23.08.2006
+-- File: CONFIG_WR_0.VHD
+
+library IEEE;
+use IEEE.std_logic_1164.all;
+
+entity CONFIG_WR_0 is
+        port
+        (
+                ADDR_REG :in std_logic_vector(31 downto 0);
+                CF_WR_COM :in std_logic;
+                IRDY_REGn :in std_logic;
+                TRDYn :in std_logic;
+                CONF_WR_04H :out std_logic;
+                CONF_WR_10H :out std_logic;
+                CONF_WR_3CH :out std_logic
+                --CONF_WR_40H :out std_logic
+        );
+end entity CONFIG_WR_0;
+
+architecture CONFIG_WR_0_DESIGN of CONFIG_WR_0 is
+
+ --
+ --
+ --
+ --
+ --
+ -- PCI Configuration Space Header
+ --
+ -- \ Bit
+ -- \
+ --Address |31 24|23 16|15 8|7 0|
+ -----------------------------------------------------------------
+ --00 |Device ID |Vendor ID |
+ --04 |Status |Command |
+ --08 |Class Code |Revision ID |
+ --0C |BIST |Header Type |Latency T. |Cache L.S. |
+ --10-24 |Base Address Register |
+ --28 |Cardbus CIS Pointer |
+ --2C |Subsystem ID |Subsystem Vendor ID |
+ --30 |Expansion ROM Base Address |
+ --34 |Reserved |
+ --38 |Reserved |
+ --3C |Max_Lat |Min_Gnt |Int_Pin |Int_Line |
+ --40-FF | |
+ -----------------------------------------------------------------
+
+
+ --PCI Bus Commands
+ --C/BE[3..0] Command Type
+ --------------------------------------
+ -- 0000 Interrupt Acknowledge
+ -- 0001 Special Cycle
+ -- 0010 I/O Read
+ -- 0011 I/O Write
+ -- 0100 Reserved
+ -- 0101 Reserved
+ -- 0110 Memory Read
+ -- 0111 Memory Write
+ --
+ -- 1000 Reserved
+ -- 1001 Reserved
+ -- 1010 Configuration Read
+ -- 1011 Configuration Write
+ -- 1100 Memory Read Multiple
+ -- 1101 Dual Address Cycle
+ -- 1110 Memory Read Line
+ -- 1111 Memory Write and Invalidate
+
+
+ --PCI Byte Enable
+ --C/BE[3..0] gueltige Datenbits
+ -------------------------------
+ -- 0000 AD 31..0
+ -- 1000 AD 23..0
+ -- 1100 AD 15..0
+ -- 1110 AD 7..0
+
+        constant CMD_INT_ACK :std_logic_vector(3 downto 0) := "0000";
+        constant CMD_SP_CYC :std_logic_vector(3 downto 0) := "0001";
+        constant CMD_IO_READ :std_logic_vector(3 downto 0) := "0010";
+        constant CMD_IO_WRITE :std_logic_vector(3 downto 0) := "0011";
+        constant CMD_RES_4 :std_logic_vector(3 downto 0) := "0100";
+        constant CMD_RES_5 :std_logic_vector(3 downto 0) := "0101";
+        constant CMD_MEM_READ :std_logic_vector(3 downto 0) := "0110";
+        constant CMD_MEM_WRITE :std_logic_vector(3 downto 0) := "0111";
+        constant CMD_RES_8 :std_logic_vector(3 downto 0) := "1000";
+        constant CMD_RES_9 :std_logic_vector(3 downto 0) := "1001";
+        constant CMD_CONF_READ :std_logic_vector(3 downto 0) := "1010";
+        constant CMD_CONF_WRITE :std_logic_vector(3 downto 0) := "1011";
+        constant CMD_MEM_READ_M :std_logic_vector(3 downto 0) := "1100";
+        constant CMD_DU_ADR_CYC :std_logic_vector(3 downto 0) := "1101";
+        constant CMD_MEN_READ_L :std_logic_vector(3 downto 0) := "1110";
+        constant CMD_MEM_WRITE_I :std_logic_vector(3 downto 0) := "1111";
+
+        signal CONFIG_ADDR :std_logic_vector(7 downto 0);
+        signal CONFIG_WRITE :std_logic_vector(3 downto 0);
+
+
+begin
+
+ --*******************************************************************
+ --******************* PCI Write Configuration Address ***************
+ --*******************************************************************
+
+        CONFIG_ADDR(7 downto 0) <= ADDR_REG(7 downto 0);
+
+
+        process (CF_WR_COM,IRDY_REGn,TRDYn,CONFIG_ADDR)
+        begin
+
+                if CF_WR_COM = '1' and IRDY_REGn = '0' and TRDYn = '0' then
+
+                        if CONFIG_ADDR = X"04" then
+                                CONFIG_WRITE <= "0001";
+
+                        elsif CONFIG_ADDR = X"10" then
+                                CONFIG_WRITE <= "0010";
+
+                        elsif CONFIG_ADDR = X"3C" then
+                                CONFIG_WRITE <= "0100";
+
+                        -- elsif CONFIG_ADDR = X"40" then
+                        --         CONFIG_WRITE <= "1000";
+                        else
+                                CONFIG_WRITE <= "0000";
+                        end if;
+                else
+                        CONFIG_WRITE <= "0000";
+                end if;
+        end process;
+
+        CONF_WR_04H <= CONFIG_WRITE(0);
+        CONF_WR_10H <= CONFIG_WRITE(1);
+        CONF_WR_3CH <= CONFIG_WRITE(2);
+        --CONF_WR_40H <= CONFIG_WRITE(3);
+
+end architecture CONFIG_WR_0_DESIGN;