projects / rsbs2 / blame
| Commit | Line | Data |
|---|---|---|
| 9e3decfb | 1 | Firmware for RSB S2: |
| ba34b57f MG |
2 | * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0 |
| 3 | * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=4EC6401E-CA1A-47D8-A178-C75D91665CE2 | |
| 9e3decfb MG |
4 | Use the first link for a patchable firmware, the second is just an "update" |
| 5 | firmware which will not touch user settings and rights... | |
| 6 | ||
| 7 | Documentation: | |
| 8 | * http://manuals.fujitsu-siemens.com/open.php?ID=4384 | |
| 6fa59b4c MG |
9 | * http://cp.literature.agilent.com/litweb/pdf/5988-8687EN.pdf |
| 10 | * http://cp.literature.agilent.com/litweb/pdf/5988-8686EN.pdf | |
| 9e3decfb MG |
11 | |
| 12 | Software: | |
| fd5efab9 MG |
13 | * http://download.ts.fujitsu.com/prim_supportcd/start.html |
| 14 | * http://download.ts.fujitsu.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi | |
| 9e3decfb | 15 | (DOS utilities (spman.exe)) |
| 4e3a5708 MG |
16 | |
| 17 | How to flash: | |
| 18 | * Download the firmware from: | |
| fd5efab9 | 19 | http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0 |
| 4e3a5708 MG |
20 | * Extract the .exe file with unzip |
| 21 | * Place RSB_S2.bin, RSB_S2.001 and RSB_S2_SINGLE.bin in the tftpboot | |
| 22 | directory. Make sure that all three files are readable! | |
| 23 | * Initiate the firmware-upgrade from the web interface: | |
| 24 | - When upgrading from 6.x, flash the RSB_S2.bin file, which | |
| 25 | will automatically load the RSB_S2.001 file in the process | |
| 26 | - When upgrading from 7.x, flash the RSB_S2_SINGLE.bin | |
| 27 | WARNING: NEVER FLASH THE .001 FILES DIRECTLY, THIS WILL BRICK YOUR BOARD! | |
| 28 | * Modify RSB_S2_SINGLE.bin with 'firmware' and reflash ;-) | |
| 29 | (Don't try to modify the other files) | |
| 5fb8cacf | 30 | |
| 205e2b01 MG |
31 | Linux notes: |
| 32 | * Disable ipmi_si: | |
| 33 | echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2 | |
| 34 | If you don't do this, the bootup process will take a long time but finally | |
| 35 | succeed. | |
| 83f4ab07 | 36 | * Install required perl packages: |
| fc0c5f31 | 37 | apt-get install libwww-perl libxml-simple-perl libcrypt-ssleay-perl |
| 5fb8cacf | 38 | |
| 279dcf12 | 39 | Pinout: |
| 5fb8cacf MG |
40 | +---------------+---------------+--------------------------------------+---+- |
| 41 | | | 2 4 6 8 A C E | | 1 | | |
| 42 | | | 1 3 5 7 9 B D | | 2 | | |
| 43 | | +-----+ +------ ------+ +---------+ +-----+ +---+ | |
| 44 | | | 1 2 | CONN2 | IPMB4 | |IPMB3| J1 | |
| 45 | | | 3 4 | +---------+ +-----+ | |
| 46 | + 5 6 | +---------+ | |
| 47 | USB | 7 8 | | 1 2 3 | | |
| 48 | | 9 A | +---------+ | |
| 49 | + +-----+ CONN3 | |
| 50 | | CONN1 | |
| 51 | | | |
| 52 | . | |
| 53 | . | |
| 54 | . | |
| 55 | + +---+ | |
| 56 | PWR | 1 | | |
| 57 | | 2 |J2 | |
| 58 | + +---+ | |
| 59 | | +-------------+ +-+ | |
| 60 | | | | | | | |
| 61 | +---+ +------------+ +------- | |
| 62 | ||
| c9427cf8 MG |
63 | CONN1: CONN2: CONN3: J1: Repair mode enable |
| 64 | 1) 1) ATX-PWR +* 1) J2: Standby power enable | |
| 65 | 2) 2) ATX-PWR GND* 2) | |
| 66 | 3) USB D- 3) ATX-PWR +* 3) | |
| 6ad9c797 MG |
67 | 4) 4) ATX-PWR GND* |
| 68 | 5) USB D+ 5) ATX-RESET +* | |
| 69 | 6) 6) ATX-RESET GND* | |
| 70 | 7) USB GND 7) ATX-RESET +* | |
| 71 | 8) 8) ATX-RESET GND* | |
| 5fb8cacf MG |
72 | 9) 9) PWR-SW |
| 73 | A) A) PWR-SW | |
| 74 | B) RESET-SW | |
| 75 | C) RESET-SW | |
| 76 | D) | |
| 77 | E) | |
| 6ad9c797 | 78 | |
| 8bec7e22 MG |
79 | *) use to connect to the front panel button and pinheader on the mainboard, |
| 80 | beware of the polarity! |