my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
- ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
+ ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
- ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
+ ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
$request->content($xml);
$response = $ua->request($request);
die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
- XMLin($response->content);
+ XMLin($response->content, SuppressEmpty => '');
}
sub _getprop {
if ($res->{RESP}->{RC} ne '0x0') {
print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+ undef;
} else {
- print "${property}: ${oldval} -> ${value}\n";
+ print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+ $oldval;
}
}
}
}
+sub usrlist {
+ my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrlist"></REQ></RMCSEQ>';
+ my $res = _req($reqstr);
+ my @users = ();
+
+ if ($res->{RESP}->{RC} ne '0x0') {
+ print "FAILED:".$res->{RESP}->{RC}."\n";
+ ();
+ } else {
+ if (ref($res->{RESP}->{USRLIST}->{USER}) eq 'ARRAY') {
+ foreach my $usr (@{$res->{RESP}->{USRLIST}->{USER}}) {
+ push @users, $usr->{NAME};
+ }
+ } else {
+ push @users, $res->{RESP}->{USRLIST}->{USER}->{NAME};
+ }
+ }
+ @users;
+}
+
+sub getusrprops {
+ my $usr = shift;
+
+ my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"></USER></REQ></RMCSEQ>';
+ my $res = _req($reqstr)->{RESP}->{USER}->{PROP};
+
+ $res;
+}
+
+sub usradd {
+ my $usr = shift;
+
+ my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usradd"><USER NAME="michael"/></REQ></RMCSEQ>';
+ my $res = _req($reqstr);
+ if ($res->{RESP}->{RC} ne '0x0') {
+ print "FAILED:".$res->{RESP}->{RC}."\n";
+ }
+}
+
+sub setusrprop {
+ my $usr = shift;
+ my $property = shift;
+ my $value = shift;
+
+ my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"></PROP></USER></REQ></RMCSEQ>';
+ my $res = _req($reqstr);
+
+ my $oldval = ${res}->{RESP}->{USER}->{PROP}->{VAL};
+
+ if ($value eq $oldval) {
+ print "${property} is already ${value}\n" if ($verbose);
+ return;
+ }
+
+ $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropset"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></USER></REQ></RMCSEQ>';
+ $res = _req($reqstr);
+
+ if ($res->{RESP}->{RC} ne '0x0') {
+ print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+ undef;
+ } else {
+ print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+ $oldval;
+ }
+}
+
sub syslog_debug {
my $destination_ip = shift;
my $bcast = shift;
- $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
- $res = _req($reqstr);
+ my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
+ my $res = _req($reqstr);
if ($res->{RESP}->{RC} ne '0x0') {
print "FAILED:".$res->{RESP}->{RC}."\n";
return;
$sid;
}
-open(INIFILE,"<$ENV{HOME}/.rsbs2rc") || die("can't open config: $ENV{HOME}/.rsbs2rc: $!");
-my %Config = ();
-my @sections = ();
-while(<INIFILE>) {
- chomp;
+sub read_inifile {
+ my $filename = shift;
- next if (m/^#/);
-
- if (m/^\s*\[(.*)\]\s*$/) {
- push @sections, $1;
- next;
- }
-
- if (@sections) {
- if (m/^\s*(.+)\s*=\s*(.*)\s*$/) {
- ${$Config{$sections[$#sections]}}{$1} = $2;
+ open(INIFILE,"<${filename}") || die("can't open config: ${filename}: $!");
+ my %Ini = ();
+ my @sections = ();
+ while(<INIFILE>) {
+ chomp;
+
+ next if (m/^#/);
+
+ if (m/^\s*\[(.*)\]\s*$/) {
+ push @sections, $1;
+ next;
+ }
+
+ if (@sections) {
+ if (m/^\s*([^=]+)\s*=\s*(.*)\s*$/) {
+ ${$Ini{$sections[$#sections]}}{$1} = $2;
+ }
}
}
+ close(INIFILE);
+
+ %Ini;
}
-close(INIFILE);
+
+my %Config = read_inifile("$ENV{HOME}/.rsbs2rc");
my $valid_arg = 0;
my $powup = 0;
print STDERR "\t-load file\tload configuration from 'file'\n";
print STDERR "\n";
print STDERR "card-alias\tone of: ";
- foreach my $alias (@sections) {
+ foreach my $alias (keys(%Config)) {
print STDERR "\"${alias}\" ";
}
print STDERR "(see ~/.rsbs2rc)\n";
if (@sprop) {
foreach my $p (@sprop) {
(my $pr, $v) = split(/=/,$p,2);
- setprop($pr, $v);
+ my $oldval = setprop($pr, $v);
+ if (defined($oldval)) {
+ print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
+ }
}
}
if ($save ne '') {
- my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
- IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP);
+ my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
+ GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
+ ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
+ LAST_IP_ADDRESS LAST_NETMASK);
open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
+ print SAVEFILE "[global]\n";
+ print STDERR "saving" if (!$verbose);
foreach my $ts (@fw_vars) {
next if (grep(/^${ts}$/, @dontsave));
next if ($phash->{PERMS} ne 'RW');
print SAVEFILE "${ts}=".$phash->{VAL}."\n";
+ print STDERR "." if (!$verbose);
+ }
+ foreach my $usr (usrlist()) {
+ print SAVEFILE "\n[${usr}]\n";
+ foreach my $up (@{getusrprops($usr)}) {
+ next if ($up->{PERMS} ne 'RW');
+
+ print SAVEFILE $up->{NAME}."=".$up->{VAL}."\n";
+ }
+ print STDERR "." if (!$verbose);
}
close(SAVEFILE);
+ print STDERR "done\n" if (!$verbose);
}
if ($load ne '') {
- open (LOADFILE, "<${load}") || die "Error opening load-file: $!\n";
- while(<LOADFILE>) {
- chomp;
- (my $p, my $v) = split(/=/, $_);
- setprop($p, $v);
+ my %loadfile = read_inifile("${load}");
+ print STDERR "loading" if (!$verbose);
+
+ foreach my $p (keys(%{$loadfile{'global'}})) {
+ setprop($p, $loadfile{'global'}->{$p});
+ print STDERR "." if (!$verbose);
+ }
+
+ my @users = usrlist();
+ foreach my $usr (keys(%loadfile)) {
+ next if ($usr eq 'global');
+ if (!grep(/^${usr}$/, @users)) {
+ print STDERR "\nAdding user \"${usr}\".\n" if ($verbose);
+ usradd($usr);
+ }
+ foreach my $p (keys(%{$loadfile{$usr}})) {
+ setusrprop($usr, $p, $loadfile{$usr}->{$p});
+ print STDERR "." if (!$verbose);
+ }
}
- close(LOADFILE);
+ print STDERR "done\n" if (!$verbose);
+ print "Settings loaded, resetting board...\n";
+ my $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardreset"></REQ></RMCSEQ>';
+ _req($reqstr);
+ exit(0);
}
if ($enable_debug ne '') {
projects / rsbs2 / blobdiff