my $sid;
my $host;
my $poweronms=200;
-my $poweroffms=4500;
+my $poweroffms=5000;
my $verbose = 0;
my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
- ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
+ ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
- DIAG_URL DNS_DOMAIN_NAME DNS_SERVER ENABLE_ANON_IPMI ENABLE_ANON_PCI
+ DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
- ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
+ ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
$request->content($xml);
$response = $ua->request($request);
die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
- XMLin($response->content);
+ XMLin($response->content, SuppressEmpty => '');
+}
+
+sub _cmd {
+ my $cmd = shift;
+
+ my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="'.$cmd.'"></REQ></RMCSEQ>';
+ my $res = _req($reqstr);
+ if ($res->{RESP}->{RC} ne '0x0') {
+ print "${cmd} failed: ".$res->{RESP}->{RC}."\n";
+ undef;
+ }
+
+ $res->{RESP};
}
sub _getprop {
my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ></RMCSEQ>';
my $resp = _req($reqstr);
+
+ print "get: ${property}\n" if ($verbose);
if ($resp->{RESP}->{RC} ne '0x0') {
$resp->{RESP}->{RC};
if ($res->{RESP}->{RC} ne '0x0') {
print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+ undef;
} else {
print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+ $oldval;
}
}
}
}
+sub usrlist {
+ my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrlist"></REQ></RMCSEQ>';
+ my $res = _req($reqstr);
+ my @users = ();
+
+ if ($res->{RESP}->{RC} ne '0x0') {
+ print "FAILED:".$res->{RESP}->{RC}."\n";
+ ();
+ } else {
+ if (ref($res->{RESP}->{USRLIST}->{USER}) eq 'ARRAY') {
+ foreach my $usr (@{$res->{RESP}->{USRLIST}->{USER}}) {
+ push @users, $usr->{NAME};
+ }
+ } else {
+ push @users, $res->{RESP}->{USRLIST}->{USER}->{NAME};
+ }
+ }
+ @users;
+}
+
+sub getusrprops {
+ my $usr = shift;
+
+ my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"></USER></REQ></RMCSEQ>';
+ my $res = _req($reqstr)->{RESP}->{USER}->{PROP};
+
+ $res;
+}
+
+sub usradd {
+ my $usr = shift;
+
+ my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usradd"><USER NAME="'.$usr.'"/></REQ></RMCSEQ>';
+ my $res = _req($reqstr);
+ if ($res->{RESP}->{RC} ne '0x0') {
+ print "FAILED:".$res->{RESP}->{RC}."\n";
+ }
+}
+
+sub setusrprop {
+ my $usr = shift;
+ my $property = shift;
+ my $value = shift;
+
+ my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"></PROP></USER></REQ></RMCSEQ>';
+ my $res = _req($reqstr);
+
+ my $oldval = ${res}->{RESP}->{USER}->{PROP}->{VAL};
+
+ if ($value eq $oldval) {
+ print "${property} is already ${value}\n" if ($verbose);
+ return;
+ }
+
+ $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropset"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></USER></REQ></RMCSEQ>';
+ $res = _req($reqstr);
+
+ if ($res->{RESP}->{RC} ne '0x0') {
+ print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+ undef;
+ } else {
+ print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+ $oldval;
+ }
+}
+
sub syslog_debug {
my $destination_ip = shift;
my $bcast = shift;
- $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
- $res = _req($reqstr);
+ my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
+ my $res = _req($reqstr);
if ($res->{RESP}->{RC} ne '0x0') {
print "FAILED:".$res->{RESP}->{RC}."\n";
return;
print "Debug messages will be sent to ${destination_ip} (broadcast: ${bcast})\n";
}
+sub status {
+ my $boardstatus = _cmd("boardstatus")->{STATUS};
+ my $fw = _cmd("boardfwstatus");
+ my $boardfwstatus = $fw->{STATUS};
+ my $boardfwprogress = $fw->{PROGRESS};
+ $bs = hex($boardstatus);
+
+ print "Server Power:\t\t" . (($bs & 0x01) ? "ON" : "OFF") . "\n";
+ print "External PSU:\t\t" . (($bs & 0x02) ? "ON" : "OFF") . "\n";
+ print "Battery:\t\t";
+ if ($bs & 0x04) {
+ if ($bs & 0x08) {
+ print "LOW\n";
+ } elsif ($bs & 0x800) {
+ print "ON\n";
+ } else {
+ print "UNKNOWN\n";
+ }
+ } else {
+ print "OFF\n";
+ }
+ print "Standby Power:\t\t" . (($bs & 0x08) ? "ON" : "OFF") . "\n";
+ print "LAN:\t\t\t" . (($bs & 0x10) ? "CONNECTED" : "NC") . "\n";
+ print "I2C:\t\t\t" . (($bs & 0x20) ? "CONNECTED" : "NC") . "\n";
+ print "SMM:\t\t\t" . (($bs & 0x40) ? "CONNECTED" : "NC") . "\n";
+ print "Instrumentation:\t" . (($bs & 0x200) ? "CONNECTED" : "NC") . "\n";
+ print "ICMB:\t\t\t" . (($bs & 0x400) ? "CONNECTED" : "NC") . "\n";
+ print "PPP:\t\t\t" . (($bs & 0x10000) ? "ON" : "OFF") . "\n";
+ print "Paging:\t\t\t" . (($bs & 0x20000) ? "ON" : "OFF") . "\n";
+ print "COM redirection:\t" . (($bs & 0x100000) ? "ON" : "OFF") . "\n";
+ print "UART redirect:\t\t" . (($bs & 0x200000) ? "ON" : "OFF") . "\n";
+ print "UART redirect pending:\t" . (($bs & 0x400000) ? "TRUE" : "FALSE") . "\n";
+ my $fws = hex ($boardfwstatus);
+ print "FW status:\t\t";
+ if ($fws == 3 || $fws == 32771) {
+ print "WAITING\n";
+ } else {
+ print "DONE\n";
+ }
+ if (($fws & 0x8080) || ($fws & 0x80)) {
+ printf("FW error:\t\t0x%02x\n", ($fws & 0xff));
+ }
+ print "boardstatus:\t\t${boardstatus}\n";
+ print "boardfwstatus:\t\t${boardfwstatus}\n";
+ print "fw upgrade progress:\t${boardfwprogress}\n";
+}
+
sub login {
my $user = shift;
my $pass = shift;
$sid;
}
-open(INIFILE,"<$ENV{HOME}/.rsbs2rc") || die("can't open config: $ENV{HOME}/.rsbs2rc: $!");
-my %Config = ();
-my @sections = ();
-while(<INIFILE>) {
- chomp;
-
- next if (m/^#/);
+sub read_inifile {
+ my $filename = shift;
- if (m/^\s*\[(.*)\]\s*$/) {
- push @sections, $1;
- next;
- }
-
- if (@sections) {
- if (m/^\s*(.+)\s*=\s*(.*)\s*$/) {
- ${$Config{$sections[$#sections]}}{$1} = $2;
+ open(INIFILE,"<${filename}") || die("can't open config: ${filename}: $!");
+ my %Ini = ();
+ my @sections = ();
+ while(<INIFILE>) {
+ chomp;
+
+ next if (m/^#/);
+
+ if (m/^\s*\[(.*)\]\s*$/) {
+ push @sections, $1;
+ next;
+ }
+
+ if (@sections) {
+ if (m/^\s*([^=]+)\s*=\s*(.*)\s*$/) {
+ ${$Ini{$sections[$#sections]}}{$1} = $2;
+ }
}
}
+ close(INIFILE);
+
+ %Ini;
}
-close(INIFILE);
+
+my %Config = read_inifile("$ENV{HOME}/.rsbs2rc");
my $valid_arg = 0;
my $powup = 0;
my $powdown = 0;
my $powcyc = 0;
my $reset = 0;
+my $resetrsbs2 = 0;
my @sprop = ();
my @gprop = ();
+my @xmlsend = ();
my $show = 0;
my $enable_debug = "";
my $save = "";
my $load = "";
+my $showstat = 0;
my $hostalias;
while (defined($ARGV[0])) {
shift @ARGV;
last SWITCH;
};
+ /^-R$/ && do {
+ $resetrsbs2 = 1;
+ shift @ARGV;
+ last SWITCH;
+ };
/^-l$/ && do {
shift @ARGV;
$enable_debug = shift @ARGV;
shift @ARGV;
last SWITCH;
};
+ /^-X$/ && do {
+ shift @ARGV;
+ push @xmlsend, shift @ARGV;
+ last SWITCH;
+ };
+ /^-b$/ && do {
+ $showstat = 1;
+ shift @ARGV;
+ last SWITCH;
+ };
/^-save$/ && do {
shift @ARGV;
$save = shift @ARGV;
}
}
-if (!defined(${$Config{$hostalias}}{'host'})) {
+if ($valid_arg && (!defined($Config{$hostalias}))) {
$valid_arg = 0;
}
print STDERR "\t-d\t\tpowerdown\n";
print STDERR "\t-c\t\tpowercycle\n";
print STDERR "\t-r\t\treset\n";
+ print STDERR "\t-R\t\treset RSB S2 borad\n";
print STDERR "\t-x\t\tshow all properties, variables and settings\n";
print STDERR "\t-l IP\t\tsend SYSLOG debug messages to IP\n";
+ print STDERR "\t-b\t\tshow board/server status\n";
+ print STDERR "\t-X\t\tsend raw XML string (start with REQ tag)\n";
print STDERR "\t-v\t\tverbose\n";
print STDERR "\t-save file\tsave configuration to 'file'\n";
print STDERR "\t-load file\tload configuration from 'file'\n";
print STDERR "\n";
print STDERR "card-alias\tone of: ";
- foreach my $alias (@sections) {
+ foreach my $alias (keys(%Config)) {
print STDERR "\"${alias}\" ";
}
print STDERR "(see ~/.rsbs2rc)\n";
if (@sprop) {
foreach my $p (@sprop) {
(my $pr, $v) = split(/=/,$p,2);
- setprop($pr, $v);
+ my $oldval = setprop($pr, $v);
+ if (defined($oldval)) {
+ print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
+ }
+ }
+}
+
+if (@xmlsend) {
+ foreach my $x (@xmlsend) {
+ print Dumper(_req('<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ>'.$x.'</RMCSEQ>'));
}
}
if ($save ne '') {
- print "save: implement me!\n";
+ my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
+ GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
+ ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
+ LAST_IP_ADDRESS LAST_NETMASK);
+
+ open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
+ print SAVEFILE "[global]\n";
+ print STDERR "saving" if (!$verbose);
+ foreach my $ts (@fw_vars) {
+ next if (grep(/^${ts}$/, @dontsave));
+
+ my $phash = _getprop($ts)->{RESP}->{PROPLIST}->{PROP};
+ next if ($phash->{PERMS} ne 'RW');
+
+ print SAVEFILE "${ts}=".$phash->{VAL}."\n";
+ print STDERR "." if (!$verbose);
+ }
+ foreach my $usr (usrlist()) {
+ print SAVEFILE "\n[${usr}]\n";
+ foreach my $up (@{getusrprops($usr)}) {
+ next if ($up->{PERMS} ne 'RW');
+
+ print SAVEFILE $up->{NAME}."=".$up->{VAL}."\n";
+ }
+ print STDERR "." if (!$verbose);
+ }
+ close(SAVEFILE);
+ print STDERR "done\n" if (!$verbose);
}
if ($load ne '') {
- print "load: implement me!\n";
+ my %loadfile = read_inifile("${load}");
+ print STDERR "loading" if (!$verbose);
+
+ foreach my $p (keys(%{$loadfile{'global'}})) {
+ setprop($p, $loadfile{'global'}->{$p});
+ print STDERR "." if (!$verbose);
+ }
+
+ my @users = usrlist();
+ foreach my $usr (keys(%loadfile)) {
+ next if ($usr eq 'global');
+ if (!grep(/^${usr}$/, @users)) {
+ print STDERR "\nAdding user \"${usr}\".\n" if ($verbose);
+ usradd($usr);
+ }
+ foreach my $p (keys(%{$loadfile{$usr}})) {
+ setusrprop($usr, $p, $loadfile{$usr}->{$p});
+ print STDERR "." if (!$verbose);
+ }
+ }
+ print STDERR "done\n" if (!$verbose);
+ print "Settings loaded, resetting board...\n";
+ _cmd("boardreset");
+ exit(0);
}
if ($enable_debug ne '') {
powercycle();
}
+if ($showstat) {
+ status();
+}
+
+if ($resetrsbs2) {
+ print "Resetting board...\n";
+ _cmd("boardreset");
+ exit(0);
+}
+
logout();
projects / rsbs2 / blobdiff