module configs now need .conf

[rsbs2] / README.txt

diff --git a/README.txt b/README.txt
index 6ee2470fbf5130fc9ade5e3c122856567d44a787..a975bb5a31861bb25514ca0a0633281baf6b6227 100644 (file)
--- a/README.txt
+++ b/README.txt
@@ -10,13 +10,13 @@ Documentation:
  * http://cp.literature.agilent.com/litweb/pdf/5988-8686EN.pdf
 
 Software:
- * http://download.fujitsu-siemens.com/prim_supportcd/start.html
- * http://download.fujitsu-siemens.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi
+ * http://download.ts.fujitsu.com/prim_supportcd/start.html
+ * http://download.ts.fujitsu.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi
    (DOS utilities (spman.exe))
 
 How to flash:
  * Download the firmware from:
-   http://support.fujitsu-siemens.de/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
+   http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
  * Extract the .exe file with unzip
  * Place RSB_S2.bin, RSB_S2.001 and RSB_S2_SINGLE.bin in the tftpboot
    directory. Make sure that all three files are readable!
@@ -30,7 +30,7 @@ How to flash:
 
 Linux notes:
  * Disable ipmi_si:
-   echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2
+   echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2.conf
    If you don't do this, the bootup process will take a long time but finally
    succeed.
  * Install required perl packages: