X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/fnordlicht-mini/blobdiff_plain/ec1bef8e19888e982ffc53129f74d58868e8d203..7e0e8f7cb17594bfe68defc9275679c98b4ac699:/firmware/fnordlicht-firmware/Makefile

diff --git a/firmware/fnordlicht-firmware/Makefile b/firmware/fnordlicht-firmware/Makefile
index 0fffc69..10f1022 100644
--- a/firmware/fnordlicht-firmware/Makefile
+++ b/firmware/fnordlicht-firmware/Makefile
@@ -56,8 +56,6 @@ CONFIG_REMOTE = 1
 CONFIG_SECONDARY_PWM = 1
 # default baudrate
 CONFIG_SERIAL_BAUDRATE = 19200
-# check jumper for master mode
-CONFIG_MASTER_MODE = 1
 
 # avrdude programmer protocol
 PROG = usbasp
@@ -70,7 +68,6 @@ CFLAGS += -DHARDWARE_$(HARDWARE)=1 -DCONFIG_SCRIPT_DEFAULT=$(CONFIG_SCRIPT_DEFAU
 CFLAGS += -DCONFIG_SCRIPT=$(CONFIG_SCRIPT) -DCONFIG_SERIAL=$(CONFIG_SERIAL)
 CFLAGS += -DCONFIG_REMOTE=$(CONFIG_REMOTE) -DCONFIG_SECONDARY_PWM=$(CONFIG_SECONDARY_PWM)
 CFLAGS += -DCONFIG_SERIAL_BAUDRATE=$(CONFIG_SERIAL_BAUDRATE)
-CFLAGS += -DCONFIG_MASTER_MODE=$(CONFIG_MASTER_MODE)
 
 ####################################################
 # 'make' configuration
@@ -219,6 +216,9 @@ program-eeprom-%: %.eep.hex
 %.eep.hex: %.elf
 	$(OBJCOPY) --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O ihex -j .eeprom $< $@
 
+%.eep.bin: %.elf
+	$(OBJCOPY) --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O binary -j .eeprom $< $@
+
 %.lss: %.elf
 	$(OBJDUMP) -h -S $< > $@