This repository contains, amongst others, an application, which emulates the
HomeMatic LAN configuration adapter-protocol to make it possible to use the
-HM-CFG-USB in [Fhem][] or as a lan configuration tool for the CCU or the
+HM-CFG-USB in [Fhem][] or as a lan configuration tool for the [CCU][] or the
HomeMatic windows configuration software, also supporting devices using
AES-signing like [KeyMatic][].
[HomeMatic]: http://www.homematic.com/
[Fhem]: http://fhem.de/
[KeyMatic]: http://www.elv.de/homematic-funk-tuerschlossantrieb-keymatic-silber-inkl-funk-handsender.html
+[CCU]: http://www.elv.de/homematic-zentrale-ccu-2.html
### Short hmland HowTo: ###
``define hmusb HMLAN 127.0.0.1:1234``
``attr hmusb hmId <hmId>``
-**Important compatibility information:**
-If older Fhem-versions (before 2015-06-19) or other software ([Homegear][]
-before 2015-07-01, [LXCCU][], a real [CCU][], Windows configuration software,
-...) is used to connect to hmland, the `-I` switch might be needed to
+**Important compatibility information:**
+If older Fhem-versions (before 2015-06-19) or [Homegear][] before 2015-07-01
+is used to connect to hmland, the `-I` switch might be needed to
impersonate a LAN-interface (this replaces the identity string HM-USB-IF with
-HM-LAN-IF).
+HM-LAN-IF). eQ-3 rfd (CCU and configuration software) works without this switch.
Software which needs this will not keep a stable connection open to
hmland without this switch. It was the hardcoded default in versions
< 0.100.
This incompatibility is needed so connecting software is able to
differentiate between HM-CFG-LAN and HM-CFG-USB.
+**Important security information:**
+Versions before 0.101 do not correctly transmit the AES channel-mask
+to the HM-CFG-USB, which results in signature-requests not being generated
+by the device in most cases. This can lead to processing of unsigned messages
+by the host-software. If you are relying on authenticated messages
+(with e.g. aesCommReq in Fhem) from devices like door-sensors and remotes,
+you should upgrade to at least version 0.101.
+
[releases-directory]: https://git.zerfleddert.de/hmcfgusb/releases/
[hmcfgusb-HEAD-xxxxxxx.tar.gz]: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/hmcfgusb/snapshot/HEAD.tar.gz
[Homegear]: https://www.homegear.eu/
-[LXCCU]: http://www.lxccu.com/
-[CCU]: http://www.elv.de/homematic-zentrale-ccu-2.html
### Updating the HM-CFG-USB firmware to version 0.967: ###
1. Compile the hmcfgusb utilities like in the hmland HowTo above
(steps 1 to 5) and stay in the directory
-2. Download the new firmware: [hmusbif.03c7.enc][]:
+2. Download the new firmware: [hmusbif.03c7.enc][] (extracted from the
+ [Firmware update tool][]):
`wget https://git.zerfleddert.de/hmcfgusb/firmware/hmusbif.03c7.enc`
3. Make sure that hmland is not running
4. Flash the update to the USB-stick:
`./flash-hmcfgusb hmusbif.03c7.enc` (You might need to use `sudo` for this)
[hmusbif.03c7.enc]: https://git.zerfleddert.de/hmcfgusb/firmware/hmusbif.03c7.enc
+[Firmware update tool]: http://www.eq-3.de/Downloads/Software/Firmware%20Update%20Tool/HM-CFG-USB-2_FW-UpdateTool-Usersoftware_V1_1_eQ-3_140619.zip
### Updating HomemMatic devices over the air (OTA) (also for CUL devices): ###
the new firmware to the device with serial *KEQ0123456*:
`./flash-ota -f hm_cc_rt_dn_update_V1_4_001_141020.eq3 -s KEQ0123456 -c /dev/ttyACM0`
+**Automatic firmware-updates:**
+The options `-C`, `-D` and `-K` can be used to send a device to the
+bootloader automatically without manually rebooting the device while
+pressing buttons.
+
+**Acknowledgments:**
+flash-ota uses the public domain [AES implementation by Brad Conte][] to answer
+signing-requests with culfw-devices.
+
[eQ-3]: http://www.eq-3.de/downloads.html
[culfw]: http://culfw.de/culfw.html
[CUL]: http://busware.de/tiki-index.php?page=CUL
[COC]: http://busware.de/tiki-index.php?page=COC
+[AES implementation by Brad Conte]: https://github.com/B-Con/crypto-algorithms
projects / hmcfgusb / blobdiff