-hmcfgusb
-========
-
-github mirror of http://git.zerfleddert.de/cgi-bin/gitweb.cgi/hmcfgusb
-
-I am not the author of this package, i'm just mirroring it here on github, all credits go to
-Michael Gernoth http://git.zerfleddert.de/cgi-bin/gitweb.cgi/hmcfgusb
-
---------------------------------------------------------------------------------------
-
-This repository contains utilities to use the HM-CFG-USB(2) (HomeMatic USB Konfigurations-Adapter) from ELV on Linux/Unix by using libusb 1.0.
-The HM-CFG-USB can be used to send and receive BidCoS-Packets to control HomeMatic home automation devices (like remote controllable sockets, switches, sensors, ...).
-
-This repository contains, amongst others, an application, which emulates the HomeMatic LAN configuration adapter-protocol to make it possible to use the HM-CFG-USB in Fhem or as a lan configuration tool for the CCU or the HomeMatic windows configuration software.
-
-Short hmland HowTo:
-Install prerequisites: apt-get install libusb-1.0-0-dev make gcc
-Get the current version of this software: hmcfgusb-HEAD-xxxxxxx.tar.gz (xxxxxxx is part of the commit-id. xxxxxxx is just a placeholder for this HowTo, use your value)
-Extract the archive: tar xzf hmcfgusb-HEAD-xxxxxxx.tar.gz
-Change into the new directory: cd hmcfgusb-HEAD-xxxxxxx
-Build the code: make
-Optional: Install udev-rules so normal users can access the device: sudo cp hmcfgusb.rules /etc/udev/rules.d/
-Plug in the HM-CFG-USB
-Run hmland (with debugging the first time, see -h switch): ./hmland -p 1234 -D
-Configure Fhem to use your new HMLAN device:
-define hmusb HMLAN 127.0.0.1:1234
-attr hmusb hmId <hmId>
-Updating the HM-CFG-USB firmware to version 0.967:
-Compile the hmcfgusb utilities like in the hmland HowTo above (steps 1 to 7) and stay in the directory
-Download the new firmware: hmusbif.03c7.enc: wget https://git.zerfleddert.de/hmcfgusb/firmware/hmusbif.03c7.enc
-Make sure that hmland is not running
-Flash the update to the USB-stick: ./flash-hmcfgusb hmusbif.03c7.enc (You might need to use sudo for this)
-(Old) Prebuilt package for OpenWRT (ar71xx): hmcfgusb_1_ar71xx.ipk
+This repository contains utilities to use the [HM-CFG-USB(2)][] (HomeMatic USB
+Konfigurations-Adapter, seems to be discontinued) from [ELV][] on Linux/Unix
+by using [libusb 1.0][].
+
+The HM-CFG-USB can be used to send and receive [BidCoS-Packets][] to control
+[HomeMatic][] home automation devices (like remote controllable sockets,
+switches, sensors, ...).
+
+This repository contains, amongst others, an application, which emulates the
+HomeMatic LAN configuration adapter-protocol to make it possible to use the
+HM-CFG-USB in [Fhem][] or as a lan configuration tool for the [CCU][] or the
+HomeMatic windows configuration software, also supporting devices using
+AES-signing like [KeyMatic][].
+
+[HM-CFG-USB(2)]: http://www.eq-3.de/Downloads/eq3/downloads_produktkatalog/homematic/bda/HM-CFG-USB-2_-UM-eQ-3-150129-web.pdf
+[ELV]: http://www.elv.de/
+[libusb 1.0]: http://www.libusb.org/
+[BidCoS-Packets]: http://homegear.eu/index.php/BidCoS%C2%AE_Packets
+[HomeMatic]: http://www.homematic.com/
+[Fhem]: http://fhem.de/
+[KeyMatic]: http://www.elv.de/homematic-funk-tuerschlossantrieb-keymatic-silber-inkl-funk-handsender.html
+[CCU]: http://www.elv.de/homematic-zentrale-ccu-2.html
+
+### Short hmland HowTo: ###
+
+1. Install prerequisites:
+ `apt-get install libusb-1.0-0-dev build-essential git`
+2. Get the current version of this software (choose **one** option):
+ * Get the current *release*-version as a .tar.gz:
+ 1. Download the latest version from the [releases-directory][].
+ Version 0.100 is used as an example for the following commands.
+ 2. Extract the archive: `tar xzf hmcfgusb-0.100.tar.gz`
+ 3. Change into the new directory: `cd hmcfgusb-0.100`
+ * Get the current *development*-version via git (can be easily updated with `git pull`):
+ 1. `git clone https://git.zerfleddert.de/git/hmcfgusb`
+ 2. Change into the new directory: `cd hmcfgusb`
+ * Get the current *development*-version as an archive:
+ 1. [hmcfgusb-HEAD-xxxxxxx.tar.gz][] (xxxxxxx is part of the commit-id.
+ xxxxxxx is just a placeholder for this HowTo, use your value)
+ 2. Extract the archive: `tar xzf hmcfgusb-HEAD-xxxxxxx.tar.gz`
+ 3. Change into the new directory: `cd hmcfgusb-HEAD-xxxxxxx`
+3. Build the code: `make`
+4. Optional: Install udev-rules so normal users can access the device:
+ `sudo cp hmcfgusb.rules /etc/udev/rules.d/`
+5. Plug in the HM-CFG-USB
+6. Run hmland (with debugging the first time, see `-h` switch):
+ `./hmland -p 1234 -D`
+7. Configure Fhem to use your new HMLAN device:
+ ``define hmusb HMLAN 127.0.0.1:1234``
+ ``attr hmusb hmId <hmId>``
+
+**Important compatibility information:**
+If older Fhem-versions (before 2015-06-19) or [Homegear][] before 2015-07-01
+is used to connect to hmland, the `-I` switch might be needed to
+impersonate a LAN-interface (this replaces the identity string HM-USB-IF with
+HM-LAN-IF). eQ-3 rfd (CCU and configuration software) works without this switch.
+Software which needs this will not keep a stable connection open to
+hmland without this switch. It was the hardcoded default in versions
+< 0.100.
+
+This incompatibility is needed so connecting software is able to
+differentiate between HM-CFG-LAN and HM-CFG-USB.
+
+**Important security information:**
+Versions before 0.101 do not correctly transmit the AES channel-mask
+to the HM-CFG-USB, which results in signature-requests not being generated
+by the device in most cases. This can lead to processing of unsigned messages
+by the host-software. If you are relying on authenticated messages
+(with e.g. aesCommReq in Fhem) from devices like door-sensors and remotes,
+you should upgrade to at least version 0.101.
+
+[releases-directory]: https://git.zerfleddert.de/hmcfgusb/releases/
+[hmcfgusb-HEAD-xxxxxxx.tar.gz]: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/hmcfgusb/snapshot/HEAD.tar.gz
+[Homegear]: https://www.homegear.eu/
+
+### Updating the HM-CFG-USB firmware to version 0.967: ###
+
+1. Compile the hmcfgusb utilities like in the hmland HowTo above
+ (steps 1 to 5) and stay in the directory
+2. Download the new firmware: [hmusbif.03c7.enc][] (extracted from the
+ [Firmware update tool][]):
+ `wget https://git.zerfleddert.de/hmcfgusb/firmware/hmusbif.03c7.enc`
+3. Make sure that hmland is not running
+4. Flash the update to the USB-stick:
+ `./flash-hmcfgusb hmusbif.03c7.enc` (You might need to use `sudo` for this)
+
+[hmusbif.03c7.enc]: https://git.zerfleddert.de/hmcfgusb/firmware/hmusbif.03c7.enc
+[Firmware update tool]: http://www.eq-3.de/Downloads/Software/Firmware%20Update%20Tool/HM-CFG-USB-2_FW-UpdateTool-Usersoftware_V1_1_eQ-3_140619.zip
+
+### Updating HomemMatic devices over the air (OTA) (also for CUL- and HM-MOD-UART-devices): ###
+
+1. Compile the hmcfgusb utilities like in the hmland HowTo above
+ (steps 1 to 5) and stay in the directory
+2. Download the new firmware from [eQ-3][], in this example the HM-CC-RT-DN
+ firmware version 1.4
+3. Extract the tgz-file: `tar xvzf hm_cc_rt_dn_update_V1_4_001_141020.tgz`
+4. Make sure that hmland is not running
+* When using the **[HM-CFG-USB(2)][]**, flash the new firmware to the device
+ with serial *KEQ0123456*:
+ `./flash-ota -f hm_cc_rt_dn_update_V1_4_001_141020.eq3 -s KEQ0123456`
+* When using a **[culfw][]**-, **[a-culfw][]**- or **[tsculfw][]**-based
+ device (**[CUL][]/[COC][]/...**), flash the new firmware to the device
+ with serial *KEQ0123456*:
+ `./flash-ota -f hm_cc_rt_dn_update_V1_4_001_141020.eq3 -s KEQ0123456 -c /dev/ttyACM0`
+* When using the **[HM-MOD-UART][]**, flash the new firmware to the device
+ with serial *KEQ0123456*:
+ `./flash-ota -f hm_cc_rt_dn_update_V1_4_001_141020.eq3 -s KEQ0123456 -U /dev/ttyAMA0`
+
+**Automatic firmware-updates:**
+The options `-C` (HMID of central), `-D` (HMID of device) and `-K` (AES key w/
+index) can be used to send a device to the bootloader automatically without
+manually rebooting the device while pressing buttons:
+
+`./flash-ota -f hm_cc_rt_dn_update_V1_4_001_141020.eq3 -C ABCDEF -D 012345 -K 01:00112233445566778899AABBCCDDEEFF`
+
+`-K` is only needed, when AES signing is active on the device.
+
+**Acknowledgments:**
+flash-ota uses the public domain [AES implementation by Brad Conte][] to answer
+signing-requests with culfw-devices.
+
+[eQ-3]: http://www.eq-3.de/downloads.html
+[culfw]: http://culfw.de/culfw.html
+[a-culfw]: https://forum.fhem.de/index.php?topic=35064.0
+[tsculfw]: https://forum.fhem.de/index.php?topic=24436.0
+[CUL]: http://busware.de/tiki-index.php?page=CUL
+[COC]: http://busware.de/tiki-index.php?page=COC
+[HM-MOD-UART]: https://www.elv.de/homematic-funkmodul-fuer-raspberry-pi-bausatz.html
+[AES implementation by Brad Conte]: https://github.com/B-Con/crypto-algorithms
projects / hmcfgusb / blobdiff