X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian/blobdiff_plain/933c215fb80d43f7850e69b17633e51d1d381d0b..11cb3754d5f509239dd2fc4b990acfe9c142cfb8:/README.md

diff --git a/README.md b/README.md
index e1ac5c2..064b0c4 100644
--- a/README.md
+++ b/README.md
@@ -2,7 +2,7 @@ This pages explains how to install Debian on Apple Silicon machines.
 
 # Tripwires
 The USB-A Port on the Mac Mini will not work in u-boot and grub.  The two
-additional USB-3 ports on the iMac 4 port model also don't work in u-boot, grub
+additional USB-3 ports on the iMac 4 port model don't work in u-boot, grub
 and Linux. In order to install Linux on a FileVault-enabled Mac run the
 installer from Recovery open Disk Utility > Expanding "Macintosh HD" >
 Selecting locked volume > click "Mount".
@@ -62,7 +62,7 @@ If you don't want to use the prebuild artefacts, you can build them yourself usi
 * Prerequisites
 
         - USB Stick. this is what this guide assumes, but it is also possible
-          to run the Debian installer from another PC using m1n1 chainloading.
+          to run the Debian livesystem from another PC using m1n1 chainloading.
           But if you know how to do that, you probably don't need this guide.
         - If possible use an Ethernet Dongle, less typing.
 
@@ -70,14 +70,13 @@ If you don't want to use the prebuild artefacts, you can build them yourself usi
 
         # Identify the usb stick device
         lsblk
+
         DEVICE=/dev/sdX
         parted -a optimal $DEVICE mklabel msdos
         parted -a optimal $DEVICE mkpart primary fat32 2048s 100%
         mkfs.vfat ${DEVICE}1
-
-        mount /dev/sdX1 /mnt
-        cd /mnt
-        curl -sL https://tg.st/u/asahi-debian-live.tar | tar -xf -
+        mount ${DEVICE}1 /mnt
+        curl -sL https://tg.st/u/asahi-debian-live.tar | tar -C /mnt -xf -
         umount /mnt
 
 In order to format the usb stick under Macos, open the disk utility, right-click on the usb stick (usually the lowest device in the list) and select erase. Choose the following options:
@@ -94,7 +93,7 @@ Than open a terminal, and run the following commands:
 
 * You need to run the asahi installer and have either an OS installed or m1n1+UEFI.
 
-* If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdoun by pressing any key and run the following comamnd to boot from usb:
+* If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdown by pressing any key and run the following comamnd to boot from usb:
 
         run bootcmd_usb0