]> git.zerfleddert.de Git - ms2-kexec/blob - board-mapphone-emu_uart.c
projects / ms2-kexec / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
update offsets to new european GB kernel, set software booting from USB
[ms2-kexec] / board-mapphone-emu_uart.c
1 /*
2 * board-mapphone-emu_uart.c
3 *
4 * Copyright (C) 2009 Motorola, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21 /* Date Author Comment
22 * =========== ============== ==============================================
23 * Jun-26-2009 Motorola Initial revision.
24 */
25
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/interrupt.h>
29 #include <linux/module.h>
30 #include <linux/device.h>
31 #include <linux/delay.h>
32 #include <linux/dma-mapping.h>
33 #include <linux/platform_device.h>
34 #include <linux/err.h>
35 #include <linux/clk.h>
36 #include <linux/io.h>
37
38 #include <linux/spi/spi.h>
39 #include <plat/system.h>
40 #include <linux/irq.h>
41
42 #include <plat/dma.h>
43 #include <plat/clock.h>
44 #include <plat/board-mapphone-emu_uart.h>
45 #include <plat/hardware.h>
46 #include <plat/omap34xx.h>
47
48 #include <linux/spi/cpcap.h>
49 #include <linux/spi/cpcap-regbits.h>
50
51 /*
52 * Register definitions for CPCAP related SPI register
53 */
54 #define OMAP2_MCSPI_MAX_FREQ 48000000
55
56 #define OMAP2_MCSPI_REVISION 0x00
57 #define OMAP2_MCSPI_SYSCONFIG 0x10
58 #define OMAP2_MCSPI_SYSSTATUS 0x14
59 #define OMAP2_MCSPI_IRQSTATUS 0x18
60 #define OMAP2_MCSPI_IRQENABLE 0x1c
61 #define OMAP2_MCSPI_WAKEUPENABLE 0x20
62 #define OMAP2_MCSPI_SYST 0x24
63 #define OMAP2_MCSPI_MODULCTRL 0x28
64
65 /* per-channel banks, 0x14 bytes each, first is: */
66 #define OMAP2_MCSPI_CHCONF0 0x2c
67 #define OMAP2_MCSPI_CHSTAT0 0x30
68 #define OMAP2_MCSPI_CHCTRL0 0x34
69 #define OMAP2_MCSPI_TX0 0x38
70 #define OMAP2_MCSPI_RX0 0x3c
71
72 /* per-register bitmasks: */
73
74 #define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0)
75 #define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
76 #define OMAP2_AFTR_RST_SET_MASTER (0 << 2)
77
78 #define OMAP2_MCSPI_SYSSTATUS_RESETDONE (1 << 0)
79 #define OMAP2_MCSPI_SYS_CON_LVL_1 1
80 #define OMAP2_MCSPI_SYS_CON_LVL_2 2
81
82 #define OMAP2_MCSPI_MODULCTRL_SINGLE (1 << 0)
83 #define OMAP2_MCSPI_MODULCTRL_MS (1 << 2)
84 #define OMAP2_MCSPI_MODULCTRL_STEST (1 << 3)
85
86 #define OMAP2_MCSPI_CHCONF_PHA (1 << 0)
87 #define OMAP2_MCSPI_CHCONF_POL (1 << 1)
88 #define OMAP2_MCSPI_CHCONF_CLKD_MASK (0x0f << 2)
89 #define OMAP2_MCSPI_CHCONF_EPOL (1 << 6)
90 #define OMAP2_MCSPI_CHCONF_WL_MASK (0x1f << 7)
91 #define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY (0x01 << 12)
92 #define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY (0x02 << 12)
93 #define OMAP2_MCSPI_CHCONF_TRM_MASK (0x03 << 12)
94 #define OMAP2_MCSPI_CHCONF_TRM_TXRX (~OMAP2_MCSPI_CHCONF_TRM_MASK)
95 #define OMAP2_MCSPI_CHCONF_DMAW (1 << 14)
96 #define OMAP2_MCSPI_CHCONF_DMAR (1 << 15)
97 #define OMAP2_MCSPI_CHCONF_DPE0 (1 << 16)
98 #define OMAP2_MCSPI_CHCONF_DPE1 (1 << 17)
99 #define OMAP2_MCSPI_CHCONF_IS (1 << 18)
100 #define OMAP2_MCSPI_CHCONF_TURBO (1 << 19)
101 #define OMAP2_MCSPI_CHCONF_FORCE (1 << 20)
102 #define OMAP2_MCSPI_CHCONF_TCS0 (1 << 25)
103 #define OMAP2_MCSPI_CHCONF_TCS1 (1 << 26)
104 #define OMAP2_MCSPI_CHCONF_TCS_MASK (0x03 << 25)
105
106 #define OMAP2_MCSPI_SYSCFG_WKUP (1 << 2)
107 #define OMAP2_MCSPI_SYSCFG_IDL (2 << 3)
108 #define OMAP2_MCSPI_SYSCFG_CLK (2 << 8)
109 #define OMAP2_MCSPI_WAKEUP_EN (1 << 1)
110 #define OMAP2_MCSPI_IRQ_WKS (1 << 16)
111 #define OMAP2_MCSPI_CHSTAT_RXS (1 << 0)
112 #define OMAP2_MCSPI_CHSTAT_TXS (1 << 1)
113 #define OMAP2_MCSPI_CHSTAT_EOT (1 << 2)
114
115 #define OMAP2_MCSPI_CHCTRL_EN (1 << 0)
116 #define OMAP2_MCSPI_MODE_IS_MASTER 0
117 #define OMAP2_MCSPI_MODE_IS_SLAVE 1
118 #define OMAP_MCSPI_WAKEUP_ENABLE 1
119
120 /*mcspi base address: (0x48098000)1st SPI, (0x4809A00) 2nd SPI*/
121 #define OMAP_MCSPI_BASE 0x48098000
122
123 #define WORD_LEN 32
124 #define CLOCK_DIV 12 /* 2^(12)=4096 48000000/4096<19200 */
125
126 #define LEVEL1 1
127 #define LEVEL2 2
128 #define WRITE_CPCAP 1
129 #define READ_CPCAP 0
130
131 #define CM_ICLKEN1_CORE 0x48004A10
132 #define CM_FCLKEN1_CORE 0x48004A00
133 #define OMAP2_MCSPI_EN_MCSPI1 (1 << 18)
134
135 #define RESET_FAIL 1
136 #define RAW_MOD_REG_BIT(val, mask, set) do { \
137 if (set) \
138 val |= mask; \
139 else \
140 val &= ~mask; \
141 } while (0)
142
143 struct cpcap_dev {
144 u16 address;
145 u16 value;
146 u32 result;
147 int access_flag;
148 };
149
150 #if 0
151 static char tx[4];
152 #endif
153 static bool emu_uart_is_active = FALSE;
154
155 /* Although SPI driver is provided through linux system as implemented above,
156 * it can not cover some special situation.
157 *
158 * During Debug phase, OMAP may need to acess CPCAP by SPI
159 * to configure or check related register when boot up is not finished.
160 * However, at this time, spi driver integrated in linux system may not
161 * be initialized properly.
162 *
163 * So we provode the following SPI driver with common API for access capcap
164 * by SPI directly, i.e. we will skip the linux system driver,
165 * but access SPI hardware directly to configure read/write specially for
166 * cpcap access.
167 *
168 * So developer should be very careful to use these APIs:
169 *
170 * read_cpcap_register_raw()
171 * write_cpcap_register_raw()
172 *
173 * Pay attention: Only use them when boot up phase.
174 * Rasons are as follows:
175 * 1. Although we provide protection on these two APIs for concurrency and
176 * race conditions, it may impact the performance of system
177 * because it will mask all interrupts during access.
178 * 2. Calling these APIs will reset all SPI registers, and may make previous
179 * data lost during run time.
180 *
181 * So, if developer wants to access CPCAP after boot up is finished,
182 * we suggest they should use poweric interface.
183 *
184 */
185 #if 0
186 static inline void raw_writel_reg(u32 value, u32 reg)
187 {
188 unsigned int absolute_reg = (u32)OMAP_MCSPI_BASE + reg;
189 #if defined(LOCAL_DEVELOPER_DEBUG)
190 printk(KERN_ERR " raw write reg =0x%x value=0x%x \n", absolute_reg,
191 value);
192 #endif
193 omap_writel(value, absolute_reg);
194 }
195
196 static inline u32 raw_readl_reg(u32 reg)
197 {
198 u32 result;
199 unsigned int absolute_reg = (u32)OMAP_MCSPI_BASE + reg;
200 result = omap_readl(absolute_reg);
201 #if defined(LOCAL_DEVELOPER_DEBUG)
202 printk(KERN_ERR " raw read reg =0x%x result =0x%x \n",
203 absolute_reg, result);
204 #endif
205 return result;
206 }
207
208 static void raw_omap_mcspi_wakeup_enable(int level)
209 {
210 u32 result;
211
212 /* configure SYSCONFIG register... */
213 if (level == LEVEL1) {
214 result = raw_readl_reg(OMAP2_MCSPI_SYSCONFIG);
215 result =
216 result | OMAP2_MCSPI_SYSCFG_WKUP |
217 OMAP2_MCSPI_SYSCFG_IDL | OMAP2_MCSPI_SYSCFG_CLK |
218 OMAP2_MCSPI_SYSCONFIG_AUTOIDLE;
219 raw_writel_reg(result, OMAP2_MCSPI_SYSCONFIG);
220 }
221
222 if (level == LEVEL2) {
223 result = raw_readl_reg(OMAP2_MCSPI_SYSCONFIG);
224 result =
225 result | OMAP2_MCSPI_SYSCFG_WKUP |
226 OMAP2_MCSPI_SYSCFG_IDL |
227 OMAP2_MCSPI_SYSCONFIG_AUTOIDLE;
228 RAW_MOD_REG_BIT(result, OMAP2_MCSPI_SYSCFG_CLK, 0);
229 raw_writel_reg(result, OMAP2_MCSPI_SYSCONFIG);
230 }
231
232 /* configure wakeupenable register... */
233 raw_writel_reg(OMAP2_MCSPI_WAKEUP_EN, OMAP2_MCSPI_WAKEUPENABLE);
234
235 /* configure enable interrupt register... */
236 result = raw_readl_reg(OMAP2_MCSPI_IRQENABLE);
237 result = result | OMAP2_MCSPI_IRQ_WKS;
238 raw_writel_reg(result, OMAP2_MCSPI_IRQENABLE);
239 }
240
241 static void raw_omap2_mcspi_set_master_mode(void)
242 {
243 u32 result;
244
245 /* configure MCSPI_MODULCTRL register... */
246 result = raw_readl_reg(OMAP2_MCSPI_MODULCTRL);
247
248 RAW_MOD_REG_BIT(result, OMAP2_MCSPI_MODULCTRL_STEST, 0);
249 RAW_MOD_REG_BIT(result, OMAP2_MCSPI_MODULCTRL_MS,
250 OMAP2_MCSPI_MODE_IS_MASTER);
251 RAW_MOD_REG_BIT(result, OMAP2_MCSPI_MODULCTRL_SINGLE, 1);
252
253 raw_writel_reg(result, OMAP2_MCSPI_MODULCTRL);
254 }
255
256 static void raw_omap2_mcspi_channel_config(void)
257 {
258 u32 result;
259
260 /* select channel 0... otherwise 0x14*channel_num */
261 result = raw_readl_reg(OMAP2_MCSPI_CHCONF0);
262
263 /* TCS Chip select Timing(2.5 clock cycles) */
264 result &= ~(OMAP2_MCSPI_CHCONF_TCS_MASK);
265 result |= OMAP2_MCSPI_CHCONF_TCS1;
266
267 /* configure master mode... */
268 result &= ~OMAP2_MCSPI_CHCONF_IS;
269 result &= ~OMAP2_MCSPI_CHCONF_DPE1;
270 result |= OMAP2_MCSPI_CHCONF_DPE0;
271
272 /* configure wordlength */
273 result &= ~OMAP2_MCSPI_CHCONF_WL_MASK;
274 result |= (WORD_LEN - 1) << 7;
275
276 /* configure active high */
277 result &= ~OMAP2_MCSPI_CHCONF_EPOL;
278
279 /* set clock divisor */
280 result &= ~OMAP2_MCSPI_CHCONF_CLKD_MASK;
281 result |= CLOCK_DIV << 2;
282
283 /* configure mode polarity=0 phase=0 */
284 result &= ~OMAP2_MCSPI_CHCONF_POL;
285 result &= ~OMAP2_MCSPI_CHCONF_PHA;
286
287 raw_writel_reg(result, OMAP2_MCSPI_CHCONF0);
288
289 }
290
291 static void raw_mcspi_setup(void)
292 {
293 raw_omap_mcspi_wakeup_enable(LEVEL1);
294 raw_omap2_mcspi_set_master_mode();
295 raw_omap2_mcspi_channel_config();
296 raw_omap_mcspi_wakeup_enable(LEVEL2);
297 }
298
299 static int raw_mcspi_reset(void)
300 {
301 unsigned long timeout;
302 u32 tmp;
303
304 raw_omap_mcspi_wakeup_enable(LEVEL1);
305
306 raw_writel_reg(OMAP2_MCSPI_SYSCONFIG_SOFTRESET,
307 OMAP2_MCSPI_SYSCONFIG);
308
309 timeout = jiffies + msecs_to_jiffies(1000);
310
311 do {
312 tmp = raw_readl_reg(OMAP2_MCSPI_SYSSTATUS);
313 if (time_after(jiffies, timeout)) {
314 printk(KERN_ERR "SPI Error: Reset is time out!\n");
315 return -RESET_FAIL;
316 }
317 } while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE));
318
319 /*configure all modules in reset master mode */
320 raw_writel_reg(OMAP2_AFTR_RST_SET_MASTER, OMAP2_MCSPI_MODULCTRL);
321
322 /* call wakeup function to set sysconfig as per pm activity */
323 raw_omap_mcspi_wakeup_enable(LEVEL1);
324 raw_omap_mcspi_wakeup_enable(LEVEL2);
325
326 return 0;
327 }
328
329 static void raw_omap2_mcspi_force_cs(int enable_tag)
330 {
331 u32 result;
332 result = raw_readl_reg(OMAP2_MCSPI_CHCONF0);
333 /*
334 * Manual spim_csx assertion to keep spim_csx for channel x active
335 * RW 0x0 between SPI words (single channel master mode only).
336 */
337 RAW_MOD_REG_BIT(result, OMAP2_MCSPI_CHCONF_FORCE, enable_tag);
338 raw_writel_reg(result, OMAP2_MCSPI_CHCONF0);
339 }
340
341 static void raw_omap2_mcspi_set_enable(int enable)
342 {
343 u32 result;
344
345 result = enable ? OMAP2_MCSPI_CHCTRL_EN : 0;
346 raw_writel_reg(result, OMAP2_MCSPI_CHCTRL0);
347 }
348
349
350 static int raw_mcspi_wait_for_reg_bit(unsigned long reg, unsigned long bit)
351 {
352 unsigned long timeout;
353
354 timeout = jiffies + msecs_to_jiffies(1000);
355
356 while (!(raw_readl_reg(reg) & bit)) {
357 if (time_after(jiffies, timeout))
358 return -1;
359 }
360
361 return 0;
362 }
363
364 static void parser_cpcap(struct cpcap_dev *dev)
365 {
366 if (dev->access_flag == WRITE_CPCAP) {
367 tx[3] = ((dev->address >> 6) & 0x000000FF) | 0x80;
368 tx[2] = (dev->address << 2) & 0x000000FF;
369 tx[1] = (dev->value >> 8) & 0x000000FF;
370 tx[0] = dev->value & 0x000000FF;
371 } else {
372 tx[3] = ((dev->address >> 6) & 0x000000FF);
373 tx[2] = (dev->address << 2) & 0x000000FF;
374 tx[1] = 1;
375 tx[0] = 1;
376 }
377 }
378
379 static void raw_omap2_mcspi_txrx_pio(struct cpcap_dev *dev)
380 {
381 u32 result;
382 u32 tx_32bit;
383
384 /* config tranmission mode --- tx rx together */
385 result = raw_readl_reg(OMAP2_MCSPI_CHCONF0);
386 result &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
387 raw_writel_reg(result, OMAP2_MCSPI_CHCONF0);
388
389 /* enable the mcspi port! */
390 raw_omap2_mcspi_set_enable(1);
391
392 parser_cpcap(dev);
393
394 memcpy((void *)&tx_32bit, (void *)tx, 4);
395
396 if (raw_mcspi_wait_for_reg_bit(OMAP2_MCSPI_CHSTAT0,
397 OMAP2_MCSPI_CHSTAT_TXS) < 0) {
398 printk(KERN_ERR "SPI Error: TXS timed out\n");
399 goto out;
400 }
401 raw_writel_reg(tx_32bit, OMAP2_MCSPI_TX0);
402
403 if (raw_mcspi_wait_for_reg_bit(OMAP2_MCSPI_CHSTAT0,
404 OMAP2_MCSPI_CHSTAT_RXS) < 0) {
405 printk(KERN_ERR "SPI Error: RXS timed out\n");
406 goto out;
407 }
408
409 result = raw_readl_reg(OMAP2_MCSPI_RX0);
410
411 dev->result = result;
412
413 out:
414 /* disable the mcspi port! */
415 raw_omap2_mcspi_set_enable(0);
416 }
417
418 static void raw_mcspi_run(struct cpcap_dev *dev)
419 {
420 raw_omap_mcspi_wakeup_enable(LEVEL1);
421 raw_omap2_mcspi_set_master_mode();
422 raw_omap2_mcspi_channel_config();
423 raw_omap2_mcspi_force_cs(1);
424 raw_omap2_mcspi_txrx_pio(dev);
425 raw_omap2_mcspi_force_cs(0);
426 raw_omap_mcspi_wakeup_enable(LEVEL2);
427 }
428
429 static void raw_omap_mcspi_enable_IFclock(void)
430 {
431 u32 result;
432
433 result = omap_readl(CM_FCLKEN1_CORE);
434 RAW_MOD_REG_BIT(result, OMAP2_MCSPI_EN_MCSPI1, 1);
435 omap_writel(result, CM_FCLKEN1_CORE);
436
437 result = omap_readl(CM_ICLKEN1_CORE);
438 RAW_MOD_REG_BIT(result, OMAP2_MCSPI_EN_MCSPI1, 1);
439 omap_writel(result, CM_ICLKEN1_CORE);
440
441 }
442
443 /*
444 * write_cpcap_register_raw is for cpcap spi write directly
445 * @return 0 on success; less than zero on failure.
446 */
447 static int write_cpcap_register_raw(u16 addr, u16 val)
448 {
449 int result;
450 unsigned long intr_flags;
451 struct cpcap_dev cpcap_write;
452
453 #ifdef CONFIG_EMU_UART_DEBUG
454 if (is_emu_uart_active() && (addr == 897 || addr == 411))
455 return 0;
456 #endif
457
458 local_irq_save(intr_flags);
459 raw_omap_mcspi_enable_IFclock();
460
461 result = raw_mcspi_reset();
462 if (result < 0) {
463 local_irq_restore(intr_flags);
464 printk(KERN_ERR "reset failed !\n");
465 return result;
466 }
467
468 raw_mcspi_setup();
469
470 cpcap_write.address = addr;
471 cpcap_write.value = val;
472 cpcap_write.access_flag = WRITE_CPCAP;
473 raw_mcspi_run(&cpcap_write);
474
475 local_irq_restore(intr_flags);
476
477 return result;
478 }
479
480 /*
481 * read_cpcap_register_raw is for cpcap spi read directly,
482 * read result is in val
483 * @return 0 on success; less than zero on failure.
484 */
485 static int read_cpcap_register_raw(u16 addr, u16 *val)
486 {
487 int result;
488 unsigned long intr_flag;
489 struct cpcap_dev cpcap_read;
490
491 local_irq_save(intr_flag);
492 raw_omap_mcspi_enable_IFclock();
493
494 result = raw_mcspi_reset();
495 if (result < 0) {
496 local_irq_restore(intr_flag);
497 printk(KERN_ERR "reset failed !\n");
498 return result;
499 }
500
501 raw_mcspi_setup();
502
503 cpcap_read.address = addr;
504 cpcap_read.access_flag = READ_CPCAP;
505 raw_mcspi_run(&cpcap_read);
506 *val = cpcap_read.result;
507
508 local_irq_restore(intr_flag);
509
510 return result;
511 }
512 #endif
513
514 /*
515 * Check if the writting is allowed. If MiniUSB port has already been
516 * configured as UART3, we should ignore some SCM register writting.
517 */
518 int is_emu_uart_iomux_reg(unsigned short offset)
519 {
520 if ((emu_uart_is_active) && \
521 ((offset >= 0x1A2 && offset < 0x1BA) || (offset == 0x19E)))
522 return 1;
523 else
524 return 0;
525 }
526
527 bool is_emu_uart_active(void)
528 {
529 return emu_uart_is_active;
530 }
531
532 static void write_omap_mux_register(u16 offset, u8 mode, u8 input_en)
533 {
534 u16 tmp_val, reg_val;
535 u32 reg = OMAP343X_CTRL_BASE + offset;
536
537 reg_val = mode | (input_en << 8);
538 tmp_val = omap_readw(reg) & ~(0x0007 | (1 << 8));
539 reg_val = reg_val | tmp_val;
540 omap_writew(reg_val, reg);
541 }
542
543 static int find_ms2_dev(struct device *dev, void *data)
544 {
545 if (!strncmp((char*)data, dev_name(dev), strlen((char*)data))) {
546 printk(KERN_INFO "Found it\n");
547 return 1;
548 }
549 return 0;
550 }
551
552 /*
553 * c021544c T cpcap_regacc_read
554 * c02154b8 T cpcap_regacc_write
555 */
556
557
558 static int (*my_cpcap_regacc_read)(struct cpcap_device *, enum cpcap_reg, unsigned short *) =
559 (int (*)(struct cpcap_device *, enum cpcap_reg, unsigned short *))0xc021544c;
560
561 static int (*my_cpcap_regacc_write)(struct cpcap_device *, enum cpcap_reg, unsigned short, unsigned short) =
562 (int (*)(struct cpcap_device *, enum cpcap_reg, unsigned short, unsigned short))0xc02154b8;
563
564
565 void activate_emu_uart(void)
566 {
567 int i;
568 u16 tmp = 0;
569 struct device *cpcap = NULL;
570 struct cpcap_device *cpcap_dev;
571
572 printk(KERN_INFO "Searching for cpcap_usb...\n");
573
574 cpcap = device_find_child(&platform_bus, "cpcap_usb", find_ms2_dev);
575 if (cpcap == NULL)
576 return;
577
578 cpcap_dev = cpcap->platform_data;
579 if (cpcap_dev == NULL)
580 return;
581
582 //read_cpcap_register_raw(18, &tmp);
583 my_cpcap_regacc_read(cpcap_dev, CPCAP_REG_VERSC1, &tmp);
584 printk(KERN_ALERT "Reading CPCAP vendor_version: 0x%04X\n", tmp);
585 /*
586 * Step 1:
587 * Configure OMAP SCM to set all ULPI pin of USB OTG to SAFE MODE
588 */
589 for (i = 0; i < 0x18; i += 2)
590 write_omap_mux_register(0x1A2 + i, 7, 0);
591
592 /*
593 * Step 2:
594 * Configure CPCAP to route UART3 to USB port; Switch VBUSIN to supply
595 * UART/USB transeiver and set VBUS standby mode 3
596 */
597 //write_cpcap_register_raw(897, 0x0101);
598 //write_cpcap_register_raw(411, 0x014C);
599 /*
600 * [CPCAP_REG_VUSBC] = {411, 0xFFFF, 0xFFFF},
601 * [CPCAP_REG_USBC2] = {897, 0x0F07, 0xFFFF},
602 */
603
604 my_cpcap_regacc_write(cpcap_dev, CPCAP_REG_VUSBC, 0xffff, 0xffff);
605 my_cpcap_regacc_write(cpcap_dev, CPCAP_REG_USBC2, 0x0f07, 0xffff);
606 my_cpcap_regacc_write(cpcap_dev, CPCAP_REG_USBC2, 0x0101, 0xffff);
607 my_cpcap_regacc_write(cpcap_dev, CPCAP_REG_VUSBC, 0x014c, 0xffff);
608
609 /* Step 3:
610 * Configure OMAP SCM to set ULPI port as UART3 function
611 */
612 /*
613 * Set UART3 RX pin in safe mode
614 */
615 write_omap_mux_register(0x19E, 7, 0);
616 /*
617 * Route UART3 TX to ULPIDATA0, RX to ULPIDATA1
618 */
619 write_omap_mux_register(0x1AA, 2, 0);
620 write_omap_mux_register(0x1AC, 2, 1);
621
622 emu_uart_is_active = TRUE;
623 printk
624 (KERN_ALERT "WARNING: MiniUSB port works in UART3 mode,"
625 "the USB functionality UNAVAILABLE!\n");
626
627 }
kexec for Motorola Milestone 2
Impressum, Datenschutz