[proxmark3-svn] / common / protocols.h

#ifndef PROTOCOLS_H
#define PROTOCOLS_H

//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
/*
ISO14443A (usually NFC tags)
	26 (7bits) = REQA
	30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
	A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
	52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
	93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
	93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
	95 20 = Anticollision of cascade level2
	95 70 = Select of cascade level2
	50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
Mifare
	60 = Authenticate with KeyA
	61 = Authenticate with KeyB
	40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
	C0 = Decrement
	C1 = Increment
	C2 = Restore
	B0 = Transfer
Ultralight C
	A0 = Compatibility Write (to accomodate MIFARE commands)
	1A = Step1 Authenticate
	AF = Step2 Authenticate


ISO14443B
	05 = REQB
	1D = ATTRIB
	50 = HALT
SRIX4K (tag does not respond to 05)
	06 00 = INITIATE
	0E xx = SELECT ID (xx = Chip-ID)
	0B = Get UID
	08 yy = Read Block (yy = block number)
	09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
	0C = Reset to Inventory
	0F = Completion
	0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)


ISO15693
	MANDATORY COMMANDS (all ISO15693 tags must support those)
		01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
		02 = Stay Quiet
	OPTIONAL COMMANDS (not all tags support them)
		20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
		21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
		22 = Lock Block
		23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
		25 = Select
		26 = Reset to Ready
		27 = Write AFI
		28 = Lock AFI
		29 = Write DSFID
		2A = Lock DSFID
		2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
		2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)

EM Microelectronic CUSTOM COMMANDS
	A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
	A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
	B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
	E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
NXP/Philips CUSTOM COMMANDS
	A0 = Inventory Read
	A1 = Fast Inventory Read
	A2 = Set EAS
	A3 = Reset EAS
	A4 = Lock EAS
	A5 = EAS Alarm
	A6 = Password Protect EAS
	A7 = Write EAS ID
	A8 = Read EPC
	B0 = Inventory Page Read
	B1 = Fast Inventory Page Read
	B2 = Get Random Number
	B3 = Set Password
	B4 = Write Password
	B5 = Lock Password
	B6 = Bit Password Protection
	B7 = Lock Page Protection Condition
	B8 = Get Multiple Block Protection Status
	B9 = Destroy SLI
	BA = Enable Privacy
	BB = 64bit Password Protection
	40 = Long Range CMD (Standard ISO/TR7003:1990)
		*/

#define ICLASS_CMD_ACTALL           0x0A
#define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
#define ICLASS_CMD_SELECT           0x81
#define ICLASS_CMD_PAGESEL          0x84
#define ICLASS_CMD_READCHECK_KD     0x88
#define ICLASS_CMD_READCHECK_KC     0x18
#define ICLASS_CMD_CHECK            0x05
#define ICLASS_CMD_DETECT           0x0F
#define ICLASS_CMD_HALT             0x00
#define ICLASS_CMD_UPDATE			0x87
#define ICLASS_CMD_ACT              0x8E
#define ICLASS_CMD_READ4            0x06


#define ISO14443A_CMD_REQA       0x26
#define ISO14443A_CMD_READBLOCK  0x30
#define ISO14443A_CMD_WUPA       0x52
#define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
#define ISO14443A_CMD_WRITEBLOCK 0xA0
#define ISO14443A_CMD_HALT       0x50
#define ISO14443A_CMD_RATS       0xE0

#define MIFARE_AUTH_KEYA	    0x60
#define MIFARE_AUTH_KEYB	    0x61
#define MIFARE_MAGICWUPC1	    0x40
#define MIFARE_MAGICWUPC2		0x43
#define MIFARE_MAGICWIPEC		0x41
#define MIFARE_CMD_INC          0xC0
#define MIFARE_CMD_DEC          0xC1
#define MIFARE_CMD_RESTORE      0xC2
#define MIFARE_CMD_TRANSFER     0xB0

#define MIFARE_ULC_WRITE		0xA2
//#define MIFARE_ULC_COMP_WRITE 0xA0
#define MIFARE_ULC_AUTH_1       0x1A
#define MIFARE_ULC_AUTH_2       0xAF

#define MIFARE_ULEV1_AUTH		0x1B
#define MIFARE_ULEV1_VERSION	0x60
#define MIFARE_ULEV1_FASTREAD	0x3A
#define MIFARE_ULEV1_READ_CNT	0x39
#define MIFARE_ULEV1_INCR_CNT	0xA5
#define MIFARE_ULEV1_READSIG	0x3C
#define MIFARE_ULEV1_CHECKTEAR	0x3E
#define MIFARE_ULEV1_VCSL		0x4B

/**
06 00 = INITIATE
0E xx = SELECT ID (xx = Chip-ID)
0B = Get UID
08 yy = Read Block (yy = block number)
09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
0C = Reset to Inventory
0F = Completion
0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
**/

#define ISO14443B_REQB         0x05
#define ISO14443B_ATTRIB       0x1D
#define ISO14443B_HALT         0x50
#define ISO14443B_INITIATE     0x06
#define ISO14443B_SELECT       0x0E
#define ISO14443B_GET_UID      0x0B
#define ISO14443B_READ_BLK     0x08
#define ISO14443B_WRITE_BLK    0x09
#define ISO14443B_RESET        0x0C
#define ISO14443B_COMPLETION   0x0F
#define ISO14443B_AUTHENTICATE 0x0A

//First byte is 26
#define ISO15693_INVENTORY     0x01
#define ISO15693_STAYQUIET     0x02
//First byte is 02
#define ISO15693_READBLOCK            0x20
#define ISO15693_WRITEBLOCK           0x21
#define ISO15693_LOCKBLOCK            0x22
#define ISO15693_READ_MULTI_BLOCK     0x23
#define ISO15693_SELECT               0x25
#define ISO15693_RESET_TO_READY       0x26
#define ISO15693_WRITE_AFI            0x27
#define ISO15693_LOCK_AFI             0x28
#define ISO15693_WRITE_DSFID          0x29
#define ISO15693_LOCK_DSFID           0x2A
#define ISO15693_GET_SYSTEM_INFO      0x2B
#define ISO15693_READ_MULTI_SECSTATUS 0x2C


// Topaz command set:
#define	TOPAZ_REQA						0x26	// Request
#define	TOPAZ_WUPA						0x52	// WakeUp
#define	TOPAZ_RID						0x78	// Read ID
#define	TOPAZ_RALL						0x00	// Read All (all bytes)
#define	TOPAZ_READ						0x01	// Read (a single byte)
#define	TOPAZ_WRITE_E					0x53	// Write-with-erase (a single byte)
#define	TOPAZ_WRITE_NE					0x1a	// Write-no-erase (a single byte)
// additional commands for Dynamic Memory Model
#define TOPAZ_RSEG						0x10	// Read segment
#define TOPAZ_READ8						0x02	// Read (eight bytes)
#define TOPAZ_WRITE_E8					0x54	// Write-with-erase (eight bytes)
#define TOPAZ_WRITE_NE8					0x1B	// Write-no-erase (eight bytes)


#define ISO_14443A 0
#define ICLASS     1
#define ISO_14443B 2
#define TOPAZ		3

//-- Picopass fuses
#define FUSE_FPERS   0x80
#define FUSE_CODING1 0x40
#define FUSE_CODING0 0x20
#define FUSE_CRYPT1  0x10
#define FUSE_CRYPT0  0x08
#define FUSE_FPROD1  0x04
#define FUSE_FPROD0  0x02
#define FUSE_RA      0x01


void printIclassDumpInfo(uint8_t* iclass_dump);

#endif // PROTOCOLS_H
Commit	Line	Data
b67f7ec3 MHS	1	#ifndef PROTOCOLS_H
	2	#define PROTOCOLS_H
	3
	4	//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
	5	/*
	6	ISO14443A (usually NFC tags)
	7	26 (7bits) = REQA
	8	30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
	9	A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
	10	52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
	11	93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
	12	93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
	13	95 20 = Anticollision of cascade level2
	14	95 70 = Select of cascade level2
	15	50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
	16	Mifare
	17	60 = Authenticate with KeyA
	18	61 = Authenticate with KeyB
	19	40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
	20	C0 = Decrement
	21	C1 = Increment
	22	C2 = Restore
	23	B0 = Transfer
	24	Ultralight C
	25	A0 = Compatibility Write (to accomodate MIFARE commands)
	26	1A = Step1 Authenticate
	27	AF = Step2 Authenticate
	28
	29
	30	ISO14443B
	31	05 = REQB
	32	1D = ATTRIB
	33	50 = HALT
	34	SRIX4K (tag does not respond to 05)
	35	06 00 = INITIATE
	36	0E xx = SELECT ID (xx = Chip-ID)
	37	0B = Get UID
	38	08 yy = Read Block (yy = block number)
	39	09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
	40	0C = Reset to Inventory
	41	0F = Completion
	42	0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
	43
	44
	45	ISO15693
	46	MANDATORY COMMANDS (all ISO15693 tags must support those)
	47	01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
	48	02 = Stay Quiet
	49	OPTIONAL COMMANDS (not all tags support them)
	50	20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
	51	21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
	52	22 = Lock Block
	53	23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
	54	25 = Select
	55	26 = Reset to Ready
	56	27 = Write AFI
	57	28 = Lock AFI
	58	29 = Write DSFID
	59	2A = Lock DSFID
	60	2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
	61	2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)
	62
	63	EM Microelectronic CUSTOM COMMANDS
	64	A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
65	A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
66	B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
67	E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
68	NXP/Philips CUSTOM COMMANDS
69	A0 = Inventory Read
70	A1 = Fast Inventory Read
71	A2 = Set EAS
72	A3 = Reset EAS
73	A4 = Lock EAS
74	A5 = EAS Alarm
75	A6 = Password Protect EAS
76	A7 = Write EAS ID
77	A8 = Read EPC
78	B0 = Inventory Page Read
79	B1 = Fast Inventory Page Read
80	B2 = Get Random Number
81	B3 = Set Password
82	B4 = Write Password
83	B5 = Lock Password
84	B6 = Bit Password Protection
85	B7 = Lock Page Protection Condition
86	B8 = Get Multiple Block Protection Status
87	B9 = Destroy SLI
88	BA = Enable Privacy
89	BB = 64bit Password Protection
90	40 = Long Range CMD (Standard ISO/TR7003:1990)
91	*/
92
93	#define ICLASS_CMD_ACTALL 0x0A
94	#define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
95	#define ICLASS_CMD_SELECT 0x81
96	#define ICLASS_CMD_PAGESEL 0x84
97	#define ICLASS_CMD_READCHECK_KD 0x88
98	#define ICLASS_CMD_READCHECK_KC 0x18
99	#define ICLASS_CMD_CHECK 0x05
100	#define ICLASS_CMD_DETECT 0x0F
101	#define ICLASS_CMD_HALT 0x00
102	#define ICLASS_CMD_UPDATE 0x87
103	#define ICLASS_CMD_ACT 0x8E
104	#define ICLASS_CMD_READ4 0x06
105
106
107	#define ISO14443A_CMD_REQA 0x26
108	#define ISO14443A_CMD_READBLOCK 0x30
109	#define ISO14443A_CMD_WUPA 0x52
110	#define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93
111	#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95
2c39c25c	112	#define ISO14443A_CMD_WRITEBLOCK 0xA0
b67f7ec3 MHS	113	#define ISO14443A_CMD_HALT 0x50
	114	#define ISO14443A_CMD_RATS 0xE0
	115
	116	#define MIFARE_AUTH_KEYA 0x60
	117	#define MIFARE_AUTH_KEYB 0x61
16a95d76	118	#define MIFARE_MAGICWUPC1 0x40
	119	#define MIFARE_MAGICWUPC2 0x43
	120	#define MIFARE_MAGICWIPEC 0x41
b67f7ec3 MHS	121	#define MIFARE_CMD_INC 0xC0
	122	#define MIFARE_CMD_DEC 0xC1
	123	#define MIFARE_CMD_RESTORE 0xC2
	124	#define MIFARE_CMD_TRANSFER 0xB0
	125
aebe7790	126	#define MIFARE_ULC_WRITE 0xA2
2c39c25c	127	//#define MIFARE_ULC_COMP_WRITE 0xA0
b67f7ec3	128	#define MIFARE_ULC_AUTH_1 0x1A
11b1e2e5	129	#define MIFARE_ULC_AUTH_2 0xAF
7d010c49	130
11b1e2e5	131	#define MIFARE_ULEV1_AUTH 0x1B
7d010c49	132	#define MIFARE_ULEV1_VERSION 0x60
11b1e2e5	133	#define MIFARE_ULEV1_FASTREAD 0x3A
11b1e2e5	134	#define MIFARE_ULEV1_READ_CNT 0x39
	135	#define MIFARE_ULEV1_INCR_CNT 0xA5
	136	#define MIFARE_ULEV1_READSIG 0x3C
	137	#define MIFARE_ULEV1_CHECKTEAR 0x3E
	138	#define MIFARE_ULEV1_VCSL 0x4B
b67f7ec3 MHS	139
	140	/**
	141	06 00 = INITIATE
	142	0E xx = SELECT ID (xx = Chip-ID)
	143	0B = Get UID
	144	08 yy = Read Block (yy = block number)
	145	09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
	146	0C = Reset to Inventory
	147	0F = Completion
	148	0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
	149	**/
	150
	151	#define ISO14443B_REQB 0x05
	152	#define ISO14443B_ATTRIB 0x1D
	153	#define ISO14443B_HALT 0x50
	154	#define ISO14443B_INITIATE 0x06
	155	#define ISO14443B_SELECT 0x0E
	156	#define ISO14443B_GET_UID 0x0B
	157	#define ISO14443B_READ_BLK 0x08
	158	#define ISO14443B_WRITE_BLK 0x09
	159	#define ISO14443B_RESET 0x0C
	160	#define ISO14443B_COMPLETION 0x0F
	161	#define ISO14443B_AUTHENTICATE 0x0A
	162
	163	//First byte is 26
	164	#define ISO15693_INVENTORY 0x01
	165	#define ISO15693_STAYQUIET 0x02
	166	//First byte is 02
	167	#define ISO15693_READBLOCK 0x20
	168	#define ISO15693_WRITEBLOCK 0x21
	169	#define ISO15693_LOCKBLOCK 0x22
	170	#define ISO15693_READ_MULTI_BLOCK 0x23
	171	#define ISO15693_SELECT 0x25
	172	#define ISO15693_RESET_TO_READY 0x26
	173	#define ISO15693_WRITE_AFI 0x27
	174	#define ISO15693_LOCK_AFI 0x28
	175	#define ISO15693_WRITE_DSFID 0x29
	176	#define ISO15693_LOCK_DSFID 0x2A
	177	#define ISO15693_GET_SYSTEM_INFO 0x2B
	178	#define ISO15693_READ_MULTI_SECSTATUS 0x2C
	179
	180
0ec548dc	181	// Topaz command set:
	182	#define TOPAZ_REQA 0x26 // Request
	183	#define TOPAZ_WUPA 0x52 // WakeUp
	184	#define TOPAZ_RID 0x78 // Read ID
	185	#define TOPAZ_RALL 0x00 // Read All (all bytes)
	186	#define TOPAZ_READ 0x01 // Read (a single byte)
	187	#define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte)
	188	#define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte)
	189	// additional commands for Dynamic Memory Model
	190	#define TOPAZ_RSEG 0x10 // Read segment
	191	#define TOPAZ_READ8 0x02 // Read (eight bytes)
	192	#define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes)
	193	#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
	194
	195
b67f7ec3 MHS	196	#define ISO_14443A 0
	197	#define ICLASS 1
	198	#define ISO_14443B 2
0ec548dc	199	#define TOPAZ 3
b67f7ec3	200
1defcf60 MHS	201	//-- Picopass fuses
	202	#define FUSE_FPERS 0x80
	203	#define FUSE_CODING1 0x40
	204	#define FUSE_CODING0 0x20
	205	#define FUSE_CRYPT1 0x10
	206	#define FUSE_CRYPT0 0x08
	207	#define FUSE_FPROD1 0x04
	208	#define FUSE_FPROD0 0x02
	209	#define FUSE_RA 0x01
	210
	211
	212	void printIclassDumpInfo(uint8_t* iclass_dump);
b67f7ec3 MHS	213
b67f7ec3 MHS	214	#endif // PROTOCOLS_H