CHG: clearing a char array before using.

[proxmark3-svn] / common / Makefile.common

#-----------------------------------------------------------------------------
# This code is licensed to you under the terms of the GNU GPL, version 2 or,
# at your option, any later version. See the LICENSE.txt file for the text of
# the license.
#-----------------------------------------------------------------------------
# Common makefile functions for all platforms
#-----------------------------------------------------------------------------

# This new makefile replaces the previous Makefile/Makefile.linux
# with as much common code for both environments as possible.
# Following is a short OS detection to set up variables, all the
# remaining Makefile should be portable and only depend on these
# variables
#

# Make sure that all is the default target
# (The including Makefile still needs to define what 'all' is)

platform = $(shell uname)

all:

CROSS  ?= arm-none-eabi-
CC	= $(CROSS)gcc
AS	= $(CROSS)as
LD	= $(CROSS)ld
OBJCOPY = $(CROSS)objcopy

OBJDIR	= obj

INCLUDE = -I../include -I../common

TAR=tar
TARFLAGS = -C .. -rvf

# Windows' echo echos its input verbatim, on Posix there is some
#  amount of shell command line parsing going on. echo "" on 
#  Windows yields literal "", on Linux yields an empty line
ifeq ($(shell echo ""),)

# This is probably a proper system, so we can use uname
UNAME := $(shell uname)
DELETE=rm -rf
MOVE=mv
COPY=cp
PATHSEP=/
FLASH_TOOL=client/flasher
DETECTED_OS=$(UNAME)

else

# Assume that we are running on Windows.
DELETE=del /q
MOVE=ren
COPY=copy
PATHSEP=\\#
#FLASH_TOOL=winsrc\\prox.exe
FLASH_TOOL=winsrc\\flash.exe
DETECTED_OS=Windows

endif


# Also search prerequisites in the common directory (for usb.c), and the fpga directory (for fpga.bit)
VPATH = . ../common/ ../fpga/

INCLUDES = ../include/proxmark3.h ../include/at91sam7s512.h ../include/config_gpio.h ../include/usb_cmd.h $(APP_INCLUDES)

# compile hint: -flto to minimise size.
CFLAGS =  -c $(INCLUDE) -Wall -Werror  -fdata-sections -ffunction-sections -pedantic -std=c99 -Os $(APP_CFLAGS)
#CFLAGS =  -c $(INCLUDE) -Wall -Werror  -pedantic -std=c99 -Os $(APP_CFLAGS)
LDFLAGS = -nostartfiles -nodefaultlibs -Wl,-gc-sections -n

LIBS = -lgcc

THUMBOBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(THUMBSRC))
ARMOBJ   = $(ARMSRC:%.c=$(OBJDIR)/%.o)
ASMOBJ   = $(patsubst %.s,$(OBJDIR)/%.o,$(ASMSRC))
VERSIONOBJ = $(OBJDIR)/version.o

$(THUMBOBJ): $(OBJDIR)/%.o: %.c $(INCLUDES)
	$(CC) $(CFLAGS) -mthumb -mthumb-interwork -o $@ $< 

$(ARMOBJ): $(OBJDIR)/%.o: %.c $(INCLUDES)
	$(CC) $(CFLAGS) -mthumb-interwork -o $@ $< 

$(ASMOBJ): $(OBJDIR)/%.o: %.s
	$(CC) $(CFLAGS) -mthumb-interwork -o $@ $<

$(VERSIONOBJ): $(OBJDIR)/%.o: %.c $(INCLUDES)
	$(CC) $(CFLAGS) -mthumb -mthumb-interwork -o $@ $< 

# This objcopy call translates physical flash addresses to logical addresses
# without touching start address or RAM addresses (.bss and .data sections)
# See ldscript.common. -- Henryk Plötz <henryk@ploetzli.ch> 2009-08-27
OBJCOPY_TRANSLATIONS = --no-change-warnings \
	--change-addresses -0x100000 --change-start 0 \
	--change-section-address .bss+0 --change-section-address .data+0 \
	--change-section-address .commonarea+0
$(OBJDIR)/%.s19: $(OBJDIR)/%.elf
	$(OBJCOPY) -Osrec --srec-forceS3 --strip-debug $(OBJCOPY_TRANSLATIONS) $^ $@

# version.c should be remade on every compilation
.PHONY: version.c
version.c: default_version.c
	perl ../tools/mkversion.pl .. > $@ || $(COPY) $^ $@ 

# Automatic dependency generation
DEPENDENCY_FILES = $(patsubst %.c,$(OBJDIR)/%.d,$(notdir $(THUMBSRC))) \
	$(patsubst %.c,$(OBJDIR)/%.d,$(notdir $(ARMSRC))) \
	$(patsubst %.s,$(OBJDIR)/%.d,$(notdir $(ASMSRC)))

$(DEPENDENCY_FILES): Makefile ../common/Makefile.common
$(patsubst %.o,%.d,$(THUMBOBJ) $(ARMOBJ)): $(OBJDIR)/%.d: %.c
	@$(CC) -MM -MT "$(@) $(@:.d=.o)" $(CFLAGS) $< > $@
$(patsubst %.o,%.d,$(ASMOBJ)):$(OBJDIR)/%.d: %.s
	@$(CC) -MM -MT "$(@) $(@:.d=.o)" $(CFLAGS) $< > $@

-include $(DEPENDENCY_FILES)