differentiate commands and sub-menus in help

[proxmark3-svn] / fpga / testbed_hi_simulate.v

`include "hi_simulate.v"\r
\r
/*\r
	pck0			- input main 24Mhz clock (PLL / 4)\r
	[7:0] adc_d		- input data from A/D converter\r
	mod_type	- modulation type\r
\r
	pwr_lo			- output to coil drivers (ssp_clk / 8)\r
	adc_clk			- output A/D clock signal\r
	ssp_frame		- output SSS frame indicator (goes high while the 8 bits are shifted)\r
	ssp_din			- output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)\r
	ssp_clk			- output SSP clock signal\r
\r
	ck_1356meg		- input unused\r
	ck_1356megb		- input unused\r
	ssp_dout		- input unused\r
	cross_hi		- input unused\r
	cross_lo		- input unused\r
\r
	pwr_hi			- output unused, tied low\r
	pwr_oe1			- output unused, undefined\r
	pwr_oe2			- output unused, undefined\r
	pwr_oe3			- output unused, undefined\r
	pwr_oe4			- output unused, undefined\r
	dbg				- output alias for adc_clk\r
*/\r
\r
module testbed_hi_simulate;\r
	reg  pck0;\r
	reg  [7:0] adc_d;\r
	reg  mod_type;\r
\r
	wire pwr_lo;\r
	wire adc_clk;\r
	reg ck_1356meg;\r
	reg  ck_1356megb;\r
	wire ssp_frame;\r
	wire ssp_din;\r
	wire ssp_clk;\r
	reg  ssp_dout;\r
	wire pwr_hi;\r
	wire pwr_oe1;\r
	wire pwr_oe2;\r
	wire pwr_oe3;\r
	wire pwr_oe4;\r
	wire cross_lo;\r
	wire cross_hi;\r
	wire dbg;\r
\r
	hi_simulate #(5,200) dut(\r
	.pck0(pck0),\r
	.ck_1356meg(ck_1356meg),\r
	.ck_1356megb(ck_1356megb),\r
	.pwr_lo(pwr_lo),\r
	.pwr_hi(pwr_hi),\r
	.pwr_oe1(pwr_oe1),\r
	.pwr_oe2(pwr_oe2),\r
	.pwr_oe3(pwr_oe3),\r
	.pwr_oe4(pwr_oe4),\r
	.adc_d(adc_d),\r
	.adc_clk(adc_clk),\r
	.ssp_frame(ssp_frame),\r
	.ssp_din(ssp_din),\r
	.ssp_dout(ssp_dout),\r
	.ssp_clk(ssp_clk),\r
	.cross_hi(cross_hi),\r
	.cross_lo(cross_lo),\r
	.dbg(dbg),\r
	.mod_type(mod_type)\r
	);\r
\r
	integer idx, i;\r
\r
	// main clock\r
	always #5 begin \r
		ck_1356megb = !ck_1356megb;\r
		ck_1356meg = ck_1356megb;\r
	end\r
\r
	always begin \r
		@(negedge adc_clk) ;\r
		adc_d = $random;\r
	end\r
\r
	//crank DUT\r
	task crank_dut;\r
		begin\r
			@(negedge ssp_clk) ;\r
			ssp_dout = $random;\r
		end\r
	endtask\r
\r
	initial begin\r
\r
		// init inputs\r
		ck_1356megb = 0;\r
		// random values\r
		adc_d = 0;\r
		ssp_dout=1;\r
\r
		// shallow modulation off\r
		mod_type=0;\r
		for (i = 0 ;  i < 16 ;  i = i + 1) begin\r
			crank_dut;\r
		end\r
\r
		// shallow modulation on\r
		mod_type=1;\r
		for (i = 0 ;  i < 16 ;  i = i + 1) begin\r
			crank_dut;\r
		end\r
		$finish;\r
	end\r
	\r
endmodule // main\r
\r