[proxmark3-svn] / client / lualibs / commands.lua

--[[
These are command definitions. This file should correspond exactly to usb_cmd.h. 
--]]
--// For the bootloader
local _commands = {
	CMD_DEVICE_INFO =                                                    0x0000,
	CMD_SETUP_WRITE =                                                    0x0001,
	CMD_FINISH_WRITE =                                                   0x0003,
	CMD_HARDWARE_RESET =                                                 0x0004,
	CMD_START_FLASH =                                                    0x0005,
	CMD_NACK =                                                           0x00fe,
	CMD_ACK =                                                            0x00ff,

	--// For general mucking around
	CMD_DEBUG_PRINT_STRING =                                             0x0100,
	CMD_DEBUG_PRINT_INTEGERS =                                           0x0101,
	CMD_DEBUG_PRINT_BYTES =                                              0x0102,
	CMD_LCD_RESET =                                                      0x0103,
	CMD_LCD =                                                            0x0104,
	CMD_BUFF_CLEAR =                                                     0x0105,
	CMD_READ_MEM =                                                       0x0106,
	CMD_VERSION =                                                        0x0107,

	--// For low-frequency tags
	CMD_READ_TI_TYPE =                                                   0x0202,
	CMD_WRITE_TI_TYPE =                                                  0x0203,
	CMD_DOWNLOADED_RAW_BITS_TI_TYPE =                                    0x0204,
	CMD_ACQUIRE_RAW_ADC_SAMPLES_125K =                                   0x0205,
	CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K =                          0x0206,
	CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K =                                  0x0207,
	CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K =                                0x0208,
	CMD_DOWNLOADED_SIM_SAMPLES_125K =                                    0x0209,
	CMD_SIMULATE_TAG_125K =                                              0x020A,
	CMD_HID_DEMOD_FSK =                                                  0x020B,
	CMD_HID_SIM_TAG =                                                    0x020C,
	CMD_SET_LF_DIVISOR =                                                 0x020D,
	CMD_LF_SIMULATE_BIDIR =                                              0x020E,
	CMD_SET_ADC_MUX =                                                    0x020F,
	CMD_HID_CLONE_TAG =                                                  0x0210,
	CMD_EM410X_WRITE_TAG =                                               0x0211,
	CMD_INDALA_CLONE_TAG =                                               0x0212,
	--// for 224 bits UID
	CMD_INDALA_CLONE_TAG_L =                                             0x0213,
	CMD_T55XX_READ_BLOCK =                                               0x0214,
	CMD_T55XX_WRITE_BLOCK =                                              0x0215,
	CMD_T55XX_READ_TRACE =                                               0x0216,
	CMD_PCF7931_READ =                                                   0x0217,
	CMD_EM4X_READ_WORD =                                                 0x0218,
	CMD_EM4X_WRITE_WORD =                                                0x0219,
	--/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */

	--// For the 13.56 MHz tags
	CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 =                              0x0300,
	CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 =                              0x0301,
	CMD_READ_SRI512_TAG =                                                0x0303,
	CMD_READ_SRIX4K_TAG =                                                0x0304,
	CMD_READER_ISO_15693 =                                               0x0310,
	CMD_SIMTAG_ISO_15693 =                                               0x0311,
	CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 =                               0x0312,
	CMD_ISO_15693_COMMAND =                                              0x0313,
	CMD_ISO_15693_COMMAND_DONE =                                         0x0314,
	CMD_ISO_15693_FIND_AFI =                                             0x0315,
	CMD_ISO_15693_DEBUG =                                                0x0316,

	--// For Hitag2 transponders
	CMD_SNOOP_HITAG =                                                    0x0370,
	CMD_SIMULATE_HITAG =                                                 0x0371,
	CMD_READER_HITAG =                                                   0x0372,

	CMD_SIMULATE_TAG_HF_LISTEN =                                         0x0380,
	CMD_SIMULATE_TAG_ISO_14443 =                                         0x0381,
	CMD_SNOOP_ISO_14443 =                                                0x0382,
	CMD_SNOOP_ISO_14443a =                                               0x0383,
	CMD_SIMULATE_TAG_ISO_14443a =                                        0x0384,
	CMD_READER_ISO_14443a =                                              0x0385,
	CMD_SIMULATE_TAG_LEGIC_RF =                                          0x0387,
	CMD_READER_LEGIC_RF =                                                0x0388,
	CMD_WRITER_LEGIC_RF =                                                0x0389,
	CMD_EPA_PACE_COLLECT_NONCE =                                         0x038A,

	CMD_SNOOP_ICLASS =                                                   0x0392,
	CMD_SIMULATE_TAG_ICLASS =                                            0x0393,
	CMD_READER_ICLASS =                                                  0x0394,

	--// For measurements of the antenna tuning
	CMD_MEASURE_ANTENNA_TUNING =                                         0x0400,
	CMD_MEASURE_ANTENNA_TUNING_HF =                                      0x0401,
	CMD_MEASURED_ANTENNA_TUNING =                                        0x0410,
	CMD_LISTEN_READER_FIELD =                                            0x0420,

	--// For direct FPGA control
	CMD_FPGA_MAJOR_MODE_OFF =                                            0x0500,

	--// For mifare commands
	CMD_MIFARE_SET_DBGMODE =                                             0x0600,
	CMD_MIFARE_EML_MEMCLR =                                              0x0601,
	CMD_MIFARE_EML_MEMSET =                                              0x0602,
	CMD_MIFARE_EML_MEMGET =                                              0x0603,
	CMD_MIFARE_EML_CARDLOAD =                                            0x0604,
	CMD_MIFARE_EML_CSETBLOCK =                                           0x0605,
	CMD_MIFARE_EML_CGETBLOCK =                                           0x0606,

	CMD_SIMULATE_MIFARE_CARD =                                           0x0610,

	CMD_READER_MIFARE =                                                  0x0611,
	CMD_MIFARE_NESTED =                                                  0x0612,

	CMD_MIFARE_READBL =                                                  0x0620,
	CMD_MIFARE_READSC =                                                  0x0621,
	CMD_MIFARE_WRITEBL =                                                 0x0622,
	CMD_MIFARE_CHKKEYS =                                                 0x0623,

	CMD_MIFARE_SNIFFER =                                                 0x0630,

	CMD_UNKNOWN =                                                        0xFFFF,
}


local _reverse_lookup,k,v = {}
for k, v in pairs(_commands) do
	_reverse_lookup[v] =  k
end
_commands.tostring = function(command)
	if(type(command) == 'number') then
		return ("%s (%d)"):format(_reverse_lookup[command]or "ERROR UNDEFINED!", command) 
	end
	return ("Error, numeric argument expected, got : %s"):format(tostring(command))
end

Command = {

	new = function(self, o)

		local o = o or {}   -- create object if user does not provide one
		setmetatable(o, self) -- DIY inheritance a'la javascript
		self.__index = self

		o.cmd = o.cmd or _commands.CMD_UNKNOWN
		--o.arg1 = "test"
		o.arg1 = o.arg1 or 0
		o.arg2 = o.arg2 or 0
		o.arg3 = o.arg3 or 0 
		local data = o.data or "0"

		if(type(data) == 'string') then
			-- We need to check if it is correct length, otherwise pad it
			local len = string.len(data)
			if(len < 1024) then  
				--Should be 1024 hex characters to represent 512 bytes of data 
				data = data .. string.rep("0",1024 - len ) 
			end
			if(len > 1024) then
				-- OOps, a bit too much data here
				print( ( "WARNING: data size too large, was %s chars, will be truncated "):format(len) )
				--
				data = data:sub(1,1024)
			end
		else 
			print(("WARNING; data was NOT a (hex-) string, but was %s"):format(type(data)))
		end
		o.data = data
		
		return o
	end,
	parse = function (packet)
		local count,cmd,arg1,arg2,arg3,data = bin.unpack('LLLLH512',packet)
		return Command:new{cmd = cmd, arg1 = arg1, arg2 = arg2, arg3 = arg3, data = data}
	end,
}
function Command:__tostring()
	local output = ("%s\r\nargs : (%s, %s, %s)\r\ndata:\r\n%s\r\n"):format(
		_commands.tostring(self.cmd),
		tostring(self.arg1),
	 	tostring(self.arg2),
	 	tostring(self.arg3),
	 	tostring(self.data))
	return output
end
function Command:getBytes()
	--If a hex-string has been used
	local data  = self.data
	local cmd = self.cmd 
	local arg1, arg2, arg3 = self.arg1, self.arg2, self.arg3

	
	return bin.pack("LLLLH",cmd, arg1, arg2, arg3,data);
end
return _commands
Commit	Line	Data
21452811	1	--[[
	2	These are command definitions. This file should correspond exactly to usb_cmd.h.
	3	--]]
	4	--// For the bootloader
	5	local _commands = {
	6	CMD_DEVICE_INFO = 0x0000,
	7	CMD_SETUP_WRITE = 0x0001,
	8	CMD_FINISH_WRITE = 0x0003,
	9	CMD_HARDWARE_RESET = 0x0004,
	10	CMD_START_FLASH = 0x0005,
	11	CMD_NACK = 0x00fe,
	12	CMD_ACK = 0x00ff,
	13
	14	--// For general mucking around
	15	CMD_DEBUG_PRINT_STRING = 0x0100,
	16	CMD_DEBUG_PRINT_INTEGERS = 0x0101,
	17	CMD_DEBUG_PRINT_BYTES = 0x0102,
	18	CMD_LCD_RESET = 0x0103,
	19	CMD_LCD = 0x0104,
	20	CMD_BUFF_CLEAR = 0x0105,
	21	CMD_READ_MEM = 0x0106,
	22	CMD_VERSION = 0x0107,
	23
	24	--// For low-frequency tags
	25	CMD_READ_TI_TYPE = 0x0202,
	26	CMD_WRITE_TI_TYPE = 0x0203,
	27	CMD_DOWNLOADED_RAW_BITS_TI_TYPE = 0x0204,
	28	CMD_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0205,
	29	CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0206,
	30	CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K = 0x0207,
	31	CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K = 0x0208,
	32	CMD_DOWNLOADED_SIM_SAMPLES_125K = 0x0209,
	33	CMD_SIMULATE_TAG_125K = 0x020A,
	34	CMD_HID_DEMOD_FSK = 0x020B,
	35	CMD_HID_SIM_TAG = 0x020C,
	36	CMD_SET_LF_DIVISOR = 0x020D,
	37	CMD_LF_SIMULATE_BIDIR = 0x020E,
	38	CMD_SET_ADC_MUX = 0x020F,
	39	CMD_HID_CLONE_TAG = 0x0210,
	40	CMD_EM410X_WRITE_TAG = 0x0211,
	41	CMD_INDALA_CLONE_TAG = 0x0212,
	42	--// for 224 bits UID
	43	CMD_INDALA_CLONE_TAG_L = 0x0213,
	44	CMD_T55XX_READ_BLOCK = 0x0214,
	45	CMD_T55XX_WRITE_BLOCK = 0x0215,
	46	CMD_T55XX_READ_TRACE = 0x0216,
	47	CMD_PCF7931_READ = 0x0217,
	48	CMD_EM4X_READ_WORD = 0x0218,
	49	CMD_EM4X_WRITE_WORD = 0x0219,
	50	--/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
	51
	52	--// For the 13.56 MHz tags
	53	CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 = 0x0300,
	54	CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 = 0x0301,
	55	CMD_READ_SRI512_TAG = 0x0303,
	56	CMD_READ_SRIX4K_TAG = 0x0304,
	57	CMD_READER_ISO_15693 = 0x0310,
	58	CMD_SIMTAG_ISO_15693 = 0x0311,
	59	CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 = 0x0312,
	60	CMD_ISO_15693_COMMAND = 0x0313,
	61	CMD_ISO_15693_COMMAND_DONE = 0x0314,
	62	CMD_ISO_15693_FIND_AFI = 0x0315,
	63	CMD_ISO_15693_DEBUG = 0x0316,
	64
65	--// For Hitag2 transponders
66	CMD_SNOOP_HITAG = 0x0370,
67	CMD_SIMULATE_HITAG = 0x0371,
68	CMD_READER_HITAG = 0x0372,
69
70	CMD_SIMULATE_TAG_HF_LISTEN = 0x0380,
71	CMD_SIMULATE_TAG_ISO_14443 = 0x0381,
72	CMD_SNOOP_ISO_14443 = 0x0382,
73	CMD_SNOOP_ISO_14443a = 0x0383,
74	CMD_SIMULATE_TAG_ISO_14443a = 0x0384,
75	CMD_READER_ISO_14443a = 0x0385,
76	CMD_SIMULATE_TAG_LEGIC_RF = 0x0387,
77	CMD_READER_LEGIC_RF = 0x0388,
78	CMD_WRITER_LEGIC_RF = 0x0389,
79	CMD_EPA_PACE_COLLECT_NONCE = 0x038A,
80
81	CMD_SNOOP_ICLASS = 0x0392,
82	CMD_SIMULATE_TAG_ICLASS = 0x0393,
83	CMD_READER_ICLASS = 0x0394,
84
85	--// For measurements of the antenna tuning
86	CMD_MEASURE_ANTENNA_TUNING = 0x0400,
87	CMD_MEASURE_ANTENNA_TUNING_HF = 0x0401,
88	CMD_MEASURED_ANTENNA_TUNING = 0x0410,
89	CMD_LISTEN_READER_FIELD = 0x0420,
90
91	--// For direct FPGA control
92	CMD_FPGA_MAJOR_MODE_OFF = 0x0500,
93
94	--// For mifare commands
95	CMD_MIFARE_SET_DBGMODE = 0x0600,
96	CMD_MIFARE_EML_MEMCLR = 0x0601,
97	CMD_MIFARE_EML_MEMSET = 0x0602,
98	CMD_MIFARE_EML_MEMGET = 0x0603,
99	CMD_MIFARE_EML_CARDLOAD = 0x0604,
100	CMD_MIFARE_EML_CSETBLOCK = 0x0605,
101	CMD_MIFARE_EML_CGETBLOCK = 0x0606,
102
103	CMD_SIMULATE_MIFARE_CARD = 0x0610,
104
105	CMD_READER_MIFARE = 0x0611,
106	CMD_MIFARE_NESTED = 0x0612,
107
108	CMD_MIFARE_READBL = 0x0620,
109	CMD_MIFARE_READSC = 0x0621,
110	CMD_MIFARE_WRITEBL = 0x0622,
111	CMD_MIFARE_CHKKEYS = 0x0623,
112
113	CMD_MIFARE_SNIFFER = 0x0630,
114
115	CMD_UNKNOWN = 0xFFFF,
116	}
117
118
119	local _reverse_lookup,k,v = {}
120	for k, v in pairs(_commands) do
121	_reverse_lookup[v] = k
122	end
123	_commands.tostring = function(command)
124	if(type(command) == 'number') then
125	return ("%s (%d)"):format(_reverse_lookup[command]or "ERROR UNDEFINED!", command)
126	end
127	return ("Error, numeric argument expected, got : %s"):format(tostring(command))
128	end
129
130	Command = {
131
132	new = function(self, o)
133
134	local o = o or {} -- create object if user does not provide one
135	setmetatable(o, self) -- DIY inheritance a'la javascript
136	self.__index = self
137
138	o.cmd = o.cmd or _commands.CMD_UNKNOWN
139	--o.arg1 = "test"
140	o.arg1 = o.arg1 or 0
141	o.arg2 = o.arg2 or 0
142	o.arg3 = o.arg3 or 0
143	local data = o.data or "0"
144
145	if(type(data) == 'string') then
146	-- We need to check if it is correct length, otherwise pad it
147	local len = string.len(data)
148	if(len < 1024) then
149	--Should be 1024 hex characters to represent 512 bytes of data
150	data = data .. string.rep("0",1024 - len )
151	end
152	if(len > 1024) then
153	-- OOps, a bit too much data here
154	print( ( "WARNING: data size too large, was %s chars, will be truncated "):format(len) )
155	--
156	data = data:sub(1,1024)
157	end
158	else
159	print(("WARNING; data was NOT a (hex-) string, but was %s"):format(type(data)))
160	end
161	o.data = data
162
163	return o
164	end,
4df3eb3f	165	parse = function (packet)
	166	local count,cmd,arg1,arg2,arg3,data = bin.unpack('LLLLH512',packet)
	167	return Command:new{cmd = cmd, arg1 = arg1, arg2 = arg2, arg3 = arg3, data = data}
	168	end,
21452811	169	}
	170	function Command:__tostring()
	171	local output = ("%s\r\nargs : (%s, %s, %s)\r\ndata:\r\n%s\r\n"):format(
	172	_commands.tostring(self.cmd),
	173	tostring(self.arg1),
	174	tostring(self.arg2),
	175	tostring(self.arg3),
	176	tostring(self.data))
	177	return output
	178	end
	179	function Command:getBytes()
	180	--If a hex-string has been used
	181	local data = self.data
	182	local cmd = self.cmd
	183	local arg1, arg2, arg3 = self.arg1, self.arg2, self.arg3
	184
	185
	186	return bin.pack("LLLLH",cmd, arg1, arg2, arg3,data);
	187	end
21452811	188	return _commands