]> git.zerfleddert.de Git - proxmark3-svn/blame - armsrc/lfops.c
chg: unused .. but not for long
[proxmark3-svn] / armsrc / lfops.c
CommitLineData
e09f21fa 1//-----------------------------------------------------------------------------
2// This code is licensed to you under the terms of the GNU GPL, version 2 or,
3// at your option, any later version. See the LICENSE.txt file for the text of
4// the license.
5//-----------------------------------------------------------------------------
6// Miscellaneous routines for low frequency tag operations.
7// Tags supported here so far are Texas Instruments (TI), HID
8// Also routines for raw mode reading/simulating of LF waveform
9//-----------------------------------------------------------------------------
10
11#include "proxmark3.h"
12#include "apps.h"
13#include "util.h"
14#include "hitag2.h"
15#include "crc16.h"
16#include "string.h"
17#include "lfdemod.h"
18#include "lfsampling.h"
1d0ccbe0 19#include "protocols.h"
c0f15a05 20#include "usb_cdc.h" // for usb_poll_validate_length
e09f21fa 21
f121b478 22#ifndef SHORT_COIL
23# define SHORT_COIL() LOW(GPIO_SSC_DOUT)
24#endif
25#ifndef OPEN_COIL
26# define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
27#endif
28
e09f21fa 29/**
30 * Function to do a modulation and then get samples.
31 * @param delay_off
95522869 32 * @param periods 0xFFFF0000 is period_0, 0x0000FFFF is period_1
33 * @param useHighFreg
e09f21fa 34 * @param command
35 */
d0724780 36void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t periods, uint32_t useHighFreq, uint8_t *command)
e09f21fa 37{
d0724780 38 /* Make sure the tag is reset */
39 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
40 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
41 SpinDelay(200);
e09f21fa 42
d0724780 43 uint16_t period_0 = periods >> 16;
44 uint16_t period_1 = periods & 0xFFFF;
45
507afbf3 46 // 95 == 125 KHz 88 == 134.8 KHz
95522869 47 int divisor_used = (useHighFreq) ? 88 : 95;
e09f21fa 48 sample_config sc = { 0,0,1, divisor_used, 0};
49 setSamplingConfig(&sc);
d0724780 50
c0f15a05 51 //clear read buffer
52 BigBuf_Clear_keep_EM();
e09f21fa 53
e09f21fa 54 LFSetupFPGAForADC(sc.divisor, 1);
55
56 // And a little more time for the tag to fully power up
d0724780 57 SpinDelay(50);
e09f21fa 58
e0165dcf 59 // now modulate the reader field
60 while(*command != '\0' && *command != ' ') {
61 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
62 LED_D_OFF();
24c49d36 63 WaitUS(delay_off);
e09f21fa 64 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
65
e0165dcf 66 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
67 LED_D_ON();
68 if(*(command++) == '0')
24c49d36 69 WaitUS(period_0);
e0165dcf 70 else
24c49d36 71 WaitUS(period_1);
e0165dcf 72 }
73 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
74 LED_D_OFF();
24c49d36 75 WaitUS(delay_off);
e09f21fa 76 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
e0165dcf 77 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
e09f21fa 78
e0165dcf 79 // now do the read
e09f21fa 80 DoAcquisition_config(false);
b828a4e1 81
82 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
e09f21fa 83}
84
e09f21fa 85/* blank r/w tag data stream
86...0000000000000000 01111111
871010101010101010101010101010101010101010101010101010101010101010
880011010010100001
8901111111
90101010101010101[0]000...
91
92[5555fe852c5555555555555555fe0000]
93*/
94void ReadTItag(void)
95{
29ff374e 96 StartTicks();
e0165dcf 97 // some hardcoded initial params
98 // when we read a TI tag we sample the zerocross line at 2Mhz
99 // TI tags modulate a 1 as 16 cycles of 123.2Khz
100 // TI tags modulate a 0 as 16 cycles of 134.2Khz
0de8e387 101 #define FSAMPLE 2000000
102 #define FREQLO 123200
103 #define FREQHI 134200
e09f21fa 104
e0165dcf 105 signed char *dest = (signed char *)BigBuf_get_addr();
106 uint16_t n = BigBuf_max_traceLen();
107 // 128 bit shift register [shift3:shift2:shift1:shift0]
108 uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
109
110 int i, cycles=0, samples=0;
111 // how many sample points fit in 16 cycles of each frequency
112 uint32_t sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI;
113 // when to tell if we're close enough to one freq or another
114 uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
115
116 // TI tags charge at 134.2Khz
117 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
118 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
119
120 // Place FPGA in passthrough mode, in this mode the CROSS_LO line
121 // connects to SSP_DIN and the SSP_DOUT logic level controls
122 // whether we're modulating the antenna (high)
123 // or listening to the antenna (low)
124 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
125
126 // get TI tag data into the buffer
127 AcquireTiType();
128
129 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
130
131 for (i=0; i<n-1; i++) {
132 // count cycles by looking for lo to hi zero crossings
133 if ( (dest[i]<0) && (dest[i+1]>0) ) {
134 cycles++;
135 // after 16 cycles, measure the frequency
136 if (cycles>15) {
137 cycles=0;
138 samples=i-samples; // number of samples in these 16 cycles
139
140 // TI bits are coming to us lsb first so shift them
141 // right through our 128 bit right shift register
142 shift0 = (shift0>>1) | (shift1 << 31);
143 shift1 = (shift1>>1) | (shift2 << 31);
144 shift2 = (shift2>>1) | (shift3 << 31);
145 shift3 >>= 1;
146
147 // check if the cycles fall close to the number
148 // expected for either the low or high frequency
149 if ( (samples>(sampleslo-threshold)) && (samples<(sampleslo+threshold)) ) {
150 // low frequency represents a 1
151 shift3 |= (1<<31);
152 } else if ( (samples>(sampleshi-threshold)) && (samples<(sampleshi+threshold)) ) {
153 // high frequency represents a 0
154 } else {
155 // probably detected a gay waveform or noise
156 // use this as gaydar or discard shift register and start again
157 shift3 = shift2 = shift1 = shift0 = 0;
158 }
159 samples = i;
160
161 // for each bit we receive, test if we've detected a valid tag
162
163 // if we see 17 zeroes followed by 6 ones, we might have a tag
164 // remember the bits are backwards
165 if ( ((shift0 & 0x7fffff) == 0x7e0000) ) {
166 // if start and end bytes match, we have a tag so break out of the loop
167 if ( ((shift0>>16)&0xff) == ((shift3>>8)&0xff) ) {
168 cycles = 0xF0B; //use this as a flag (ugly but whatever)
169 break;
170 }
171 }
172 }
173 }
174 }
175
176 // if flag is set we have a tag
177 if (cycles!=0xF0B) {
178 DbpString("Info: No valid tag detected.");
179 } else {
180 // put 64 bit data into shift1 and shift0
181 shift0 = (shift0>>24) | (shift1 << 8);
182 shift1 = (shift1>>24) | (shift2 << 8);
183
184 // align 16 bit crc into lower half of shift2
185 shift2 = ((shift2>>24) | (shift3 << 8)) & 0x0ffff;
186
187 // if r/w tag, check ident match
e09f21fa 188 if (shift3 & (1<<15) ) {
e0165dcf 189 DbpString("Info: TI tag is rewriteable");
190 // only 15 bits compare, last bit of ident is not valid
e09f21fa 191 if (((shift3 >> 16) ^ shift0) & 0x7fff ) {
e0165dcf 192 DbpString("Error: Ident mismatch!");
193 } else {
194 DbpString("Info: TI tag ident is valid");
195 }
196 } else {
197 DbpString("Info: TI tag is readonly");
198 }
199
200 // WARNING the order of the bytes in which we calc crc below needs checking
201 // i'm 99% sure the crc algorithm is correct, but it may need to eat the
202 // bytes in reverse or something
203 // calculate CRC
204 uint32_t crc=0;
205
206 crc = update_crc16(crc, (shift0)&0xff);
207 crc = update_crc16(crc, (shift0>>8)&0xff);
208 crc = update_crc16(crc, (shift0>>16)&0xff);
209 crc = update_crc16(crc, (shift0>>24)&0xff);
210 crc = update_crc16(crc, (shift1)&0xff);
211 crc = update_crc16(crc, (shift1>>8)&0xff);
212 crc = update_crc16(crc, (shift1>>16)&0xff);
213 crc = update_crc16(crc, (shift1>>24)&0xff);
214
1a570b0a 215 Dbprintf("Info: Tag data: %x%08x, crc=%x", (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF);
e0165dcf 216 if (crc != (shift2&0xffff)) {
217 Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc);
218 } else {
219 DbpString("Info: CRC is good");
220 }
221 }
29ff374e 222 StopTicks();
e09f21fa 223}
224
225void WriteTIbyte(uint8_t b)
226{
e0165dcf 227 int i = 0;
228
229 // modulate 8 bits out to the antenna
230 for (i=0; i<8; i++)
231 {
24c49d36 232 if ( b & ( 1 << i ) ) {
233 // stop modulating antenna 1ms
e0165dcf 234 LOW(GPIO_SSC_DOUT);
24c49d36 235 WaitUS(1000);
236 // modulate antenna 1ms
237 HIGH(GPIO_SSC_DOUT);
238 WaitUS(1000);
e0165dcf 239 } else {
24c49d36 240 // stop modulating antenna 1ms
e0165dcf 241 LOW(GPIO_SSC_DOUT);
24c49d36 242 WaitUS(300);
243 // modulate antenna 1m
e0165dcf 244 HIGH(GPIO_SSC_DOUT);
24c49d36 245 WaitUS(1700);
e0165dcf 246 }
247 }
e09f21fa 248}
249
250void AcquireTiType(void)
251{
e0165dcf 252 int i, j, n;
253 // tag transmission is <20ms, sampling at 2M gives us 40K samples max
254 // each sample is 1 bit stuffed into a uint32_t so we need 1250 uint32_t
a739812e 255 #define TIBUFLEN 1250
e09f21fa 256
e0165dcf 257 // clear buffer
a739812e 258 uint32_t *buf = (uint32_t *)BigBuf_get_addr();
259
260 //clear buffer now so it does not interfere with timing later
261 BigBuf_Clear_ext(false);
e0165dcf 262
263 // Set up the synchronous serial port
264 AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
265 AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN;
266
267 // steal this pin from the SSP and use it to control the modulation
268 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
269 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
270
271 AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
272 AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;
273
274 // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long
275 // 48/2 = 24 MHz clock must be divided by 12
276 AT91C_BASE_SSC->SSC_CMR = 12;
277
278 AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0);
279 AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF;
280 AT91C_BASE_SSC->SSC_TCMR = 0;
281 AT91C_BASE_SSC->SSC_TFMR = 0;
c5e8b916 282 // iceman, FpgaSetupSsc() ?? the code above? can it be replaced?
e0165dcf 283 LED_D_ON();
284
285 // modulate antenna
286 HIGH(GPIO_SSC_DOUT);
287
288 // Charge TI tag for 50ms.
29ff374e 289 WaitMS(50);
e0165dcf 290
291 // stop modulating antenna and listen
292 LOW(GPIO_SSC_DOUT);
293
294 LED_D_OFF();
295
296 i = 0;
297 for(;;) {
298 if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
a739812e 299 buf[i] = AT91C_BASE_SSC->SSC_RHR; // store 32 bit values in buffer
e0165dcf 300 i++; if(i >= TIBUFLEN) break;
301 }
302 WDT_HIT();
303 }
304
305 // return stolen pin to SSP
306 AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
307 AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;
308
309 char *dest = (char *)BigBuf_get_addr();
a739812e 310 n = TIBUFLEN * 32;
311
e0165dcf 312 // unpack buffer
a739812e 313 for (i = TIBUFLEN-1; i >= 0; i--) {
314 for (j = 0; j < 32; j++) {
315 if(buf[i] & (1 << j)) {
e0165dcf 316 dest[--n] = 1;
317 } else {
318 dest[--n] = -1;
319 }
320 }
321 }
e09f21fa 322}
323
324// arguments: 64bit data split into 32bit idhi:idlo and optional 16bit crc
325// if crc provided, it will be written with the data verbatim (even if bogus)
326// if not provided a valid crc will be computed from the data and written.
327void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
328{
e0165dcf 329 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
330 if(crc == 0) {
331 crc = update_crc16(crc, (idlo)&0xff);
332 crc = update_crc16(crc, (idlo>>8)&0xff);
333 crc = update_crc16(crc, (idlo>>16)&0xff);
334 crc = update_crc16(crc, (idlo>>24)&0xff);
335 crc = update_crc16(crc, (idhi)&0xff);
336 crc = update_crc16(crc, (idhi>>8)&0xff);
337 crc = update_crc16(crc, (idhi>>16)&0xff);
338 crc = update_crc16(crc, (idhi>>24)&0xff);
339 }
a739812e 340 Dbprintf("Writing to tag: %x%08x, crc=%x", (unsigned int) idhi, (unsigned int) idlo, crc);
e0165dcf 341
342 // TI tags charge at 134.2Khz
343 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
344 // Place FPGA in passthrough mode, in this mode the CROSS_LO line
345 // connects to SSP_DIN and the SSP_DOUT logic level controls
346 // whether we're modulating the antenna (high)
347 // or listening to the antenna (low)
348 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
17556415 349 StartTicks();
350
e0165dcf 351 LED_A_ON();
17556415 352
e0165dcf 353 // steal this pin from the SSP and use it to control the modulation
354 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
355 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
356
357 // writing algorithm:
358 // a high bit consists of a field off for 1ms and field on for 1ms
359 // a low bit consists of a field off for 0.3ms and field on for 1.7ms
360 // initiate a charge time of 50ms (field on) then immediately start writing bits
361 // start by writing 0xBB (keyword) and 0xEB (password)
362 // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer)
363 // finally end with 0x0300 (write frame)
1a570b0a 364 // all data is sent lsb first
17556415 365 // finish with 50ms programming time
e0165dcf 366
367 // modulate antenna
368 HIGH(GPIO_SSC_DOUT);
29ff374e 369 WaitMS(50); // charge time
e0165dcf 370
371 WriteTIbyte(0xbb); // keyword
372 WriteTIbyte(0xeb); // password
373 WriteTIbyte( (idlo )&0xff );
374 WriteTIbyte( (idlo>>8 )&0xff );
375 WriteTIbyte( (idlo>>16)&0xff );
376 WriteTIbyte( (idlo>>24)&0xff );
377 WriteTIbyte( (idhi )&0xff );
378 WriteTIbyte( (idhi>>8 )&0xff );
379 WriteTIbyte( (idhi>>16)&0xff );
380 WriteTIbyte( (idhi>>24)&0xff ); // data hi to lo
381 WriteTIbyte( (crc )&0xff ); // crc lo
382 WriteTIbyte( (crc>>8 )&0xff ); // crc hi
383 WriteTIbyte(0x00); // write frame lo
384 WriteTIbyte(0x03); // write frame hi
385 HIGH(GPIO_SSC_DOUT);
29ff374e 386 WaitMS(50); // programming time
e0165dcf 387
388 LED_A_OFF();
389
390 // get TI tag data into the buffer
391 AcquireTiType();
392
393 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
6c68b84a 394 DbpString("Now use `lf ti read` to check");
29ff374e 395 StopTicks();
e09f21fa 396}
397
cd073027 398void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
e09f21fa 399{
f121b478 400 int i = 0;
49065576 401 uint8_t *buf = BigBuf_get_addr();
4460be68 402
17556415 403 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
404 //FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
501c666b 405 //FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
406 //FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_TOGGLE_MODE );
6fe5fe8d
I
407
408 // set frequency, get values from 'lf config' command
409 sample_config *sc = getSamplingConfig();
410
411 if ( (sc->divisor == 1) || (sc->divisor < 0) || (sc->divisor > 255) )
412 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
413 else if (sc->divisor == 0)
414 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
415 else
416 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor);
417
501c666b 418 SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
419
e0165dcf 420 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
e0165dcf 421 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
422 AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
e09f21fa 423
501c666b 424 // power on antenna
17556415 425 OPEN_COIL();
426 // charge time
427 WaitMS(50);
501c666b 428
e0165dcf 429 for(;;) {
f121b478 430 WDT_HIT();
431
432 if (ledcontrol) LED_D_ON();
433
49065576 434 // wait until SSC_CLK goes HIGH
435 // used as a simple detection of a reader field?
e0165dcf 436 while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
e0165dcf 437 WDT_HIT();
49065576 438 if ( usb_poll_validate_length() || BUTTON_PRESS() )
439 goto OUT;
e0165dcf 440 }
f121b478 441
49065576 442 if(buf[i])
e0165dcf 443 OPEN_COIL();
444 else
445 SHORT_COIL();
501c666b 446
e0165dcf 447 //wait until SSC_CLK goes LOW
448 while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
e0165dcf 449 WDT_HIT();
49065576 450 if ( usb_poll_validate_length() || BUTTON_PRESS() )
451 goto OUT;
e0165dcf 452 }
501c666b 453
e0165dcf 454 i++;
455 if(i == period) {
e0165dcf 456 i = 0;
457 if (gap) {
f121b478 458 WDT_HIT();
e0165dcf 459 SHORT_COIL();
501c666b 460 SpinDelayUs(gap);
e0165dcf 461 }
462 }
501c666b 463
464 if (ledcontrol) LED_D_OFF();
e0165dcf 465 }
49065576 466OUT:
467 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
49065576 468 LED_D_OFF();
c50259b3 469 DbpString("Simulation stopped");
49065576 470 return;
e09f21fa 471}
472
e09f21fa 473#define DEBUG_FRAME_CONTENTS 1
474void SimulateTagLowFrequencyBidir(int divisor, int t0)
475{
476}
477
478// compose fc/8 fc/10 waveform (FSK2)
479static void fc(int c, int *n)
480{
e0165dcf 481 uint8_t *dest = BigBuf_get_addr();
482 int idx;
483
484 // for when we want an fc8 pattern every 4 logical bits
485 if(c==0) {
486 dest[((*n)++)]=1;
487 dest[((*n)++)]=1;
488 dest[((*n)++)]=1;
489 dest[((*n)++)]=1;
490 dest[((*n)++)]=0;
491 dest[((*n)++)]=0;
492 dest[((*n)++)]=0;
493 dest[((*n)++)]=0;
494 }
495
496 // an fc/8 encoded bit is a bit pattern of 11110000 x6 = 48 samples
497 if(c==8) {
498 for (idx=0; idx<6; idx++) {
499 dest[((*n)++)]=1;
500 dest[((*n)++)]=1;
501 dest[((*n)++)]=1;
502 dest[((*n)++)]=1;
503 dest[((*n)++)]=0;
504 dest[((*n)++)]=0;
505 dest[((*n)++)]=0;
506 dest[((*n)++)]=0;
507 }
508 }
509
510 // an fc/10 encoded bit is a bit pattern of 1111100000 x5 = 50 samples
511 if(c==10) {
512 for (idx=0; idx<5; idx++) {
513 dest[((*n)++)]=1;
514 dest[((*n)++)]=1;
515 dest[((*n)++)]=1;
516 dest[((*n)++)]=1;
517 dest[((*n)++)]=1;
518 dest[((*n)++)]=0;
519 dest[((*n)++)]=0;
520 dest[((*n)++)]=0;
521 dest[((*n)++)]=0;
522 dest[((*n)++)]=0;
523 }
524 }
e09f21fa 525}
526// compose fc/X fc/Y waveform (FSKx)
712ebfa6 527static void fcAll(uint8_t fc, int *n, uint8_t clock, uint16_t *modCnt)
e09f21fa 528{
e0165dcf 529 uint8_t *dest = BigBuf_get_addr();
530 uint8_t halfFC = fc/2;
531 uint8_t wavesPerClock = clock/fc;
532 uint8_t mod = clock % fc; //modifier
533 uint8_t modAdj = fc/mod; //how often to apply modifier
534 bool modAdjOk = !(fc % mod); //if (fc % mod==0) modAdjOk=TRUE;
535 // loop through clock - step field clock
536 for (uint8_t idx=0; idx < wavesPerClock; idx++){
537 // put 1/2 FC length 1's and 1/2 0's per field clock wave (to create the wave)
538 memset(dest+(*n), 0, fc-halfFC); //in case of odd number use extra here
539 memset(dest+(*n)+(fc-halfFC), 1, halfFC);
540 *n += fc;
541 }
542 if (mod>0) (*modCnt)++;
543 if ((mod>0) && modAdjOk){ //fsk2
544 if ((*modCnt % modAdj) == 0){ //if 4th 8 length wave in a rf/50 add extra 8 length wave
545 memset(dest+(*n), 0, fc-halfFC);
546 memset(dest+(*n)+(fc-halfFC), 1, halfFC);
547 *n += fc;
548 }
549 }
550 if (mod>0 && !modAdjOk){ //fsk1
551 memset(dest+(*n), 0, mod-(mod/2));
552 memset(dest+(*n)+(mod-(mod/2)), 1, mod/2);
553 *n += mod;
554 }
e09f21fa 555}
556
557// prepare a waveform pattern in the buffer based on the ID given then
558// simulate a HID tag until the button is pressed
559void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
560{
f121b478 561 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
562 set_tracing(FALSE);
563
564 int n = 0, i = 0;
e0165dcf 565 /*
566 HID tag bitstream format
567 The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits
568 A 1 bit is represented as 6 fc8 and 5 fc10 patterns
569 A 0 bit is represented as 5 fc10 and 6 fc8 patterns
570 A fc8 is inserted before every 4 bits
571 A special start of frame pattern is used consisting a0b0 where a and b are neither 0
572 nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10)
573 */
574
f121b478 575 if (hi > 0xFFF) {
e0165dcf 576 DbpString("Tags can only have 44 bits. - USE lf simfsk for larger tags");
577 return;
578 }
579 fc(0,&n);
580 // special start of frame marker containing invalid bit sequences
581 fc(8, &n); fc(8, &n); // invalid
582 fc(8, &n); fc(10, &n); // logical 0
583 fc(10, &n); fc(10, &n); // invalid
584 fc(8, &n); fc(10, &n); // logical 0
585
586 WDT_HIT();
587 // manchester encode bits 43 to 32
588 for (i=11; i>=0; i--) {
589 if ((i%4)==3) fc(0,&n);
590 if ((hi>>i)&1) {
591 fc(10, &n); fc(8, &n); // low-high transition
592 } else {
593 fc(8, &n); fc(10, &n); // high-low transition
594 }
595 }
596
597 WDT_HIT();
598 // manchester encode bits 31 to 0
599 for (i=31; i>=0; i--) {
600 if ((i%4)==3) fc(0,&n);
601 if ((lo>>i)&1) {
602 fc(10, &n); fc(8, &n); // low-high transition
603 } else {
604 fc(8, &n); fc(10, &n); // high-low transition
605 }
606 }
f121b478 607 WDT_HIT();
608
a739812e 609 if (ledcontrol) LED_A_ON();
e0165dcf 610 SimulateTagLowFrequency(n, 0, ledcontrol);
a739812e 611 if (ledcontrol) LED_A_OFF();
e09f21fa 612}
613
614// prepare a waveform pattern in the buffer based on the ID given then
615// simulate a FSK tag until the button is pressed
616// arg1 contains fcHigh and fcLow, arg2 contains invert and clock
617void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
618{
f121b478 619 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
620
621 // free eventually allocated BigBuf memory
622 BigBuf_free(); BigBuf_Clear_ext(false);
623 clear_trace();
624 set_tracing(FALSE);
625
626 int ledcontrol = 1, n = 0, i = 0;
e0165dcf 627 uint8_t fcHigh = arg1 >> 8;
628 uint8_t fcLow = arg1 & 0xFF;
629 uint16_t modCnt = 0;
630 uint8_t clk = arg2 & 0xFF;
631 uint8_t invert = (arg2 >> 8) & 1;
632
633 for (i=0; i<size; i++){
f121b478 634
635 if (BitStream[i] == invert)
e0165dcf 636 fcAll(fcLow, &n, clk, &modCnt);
f121b478 637 else
e0165dcf 638 fcAll(fcHigh, &n, clk, &modCnt);
e0165dcf 639 }
f121b478 640 WDT_HIT();
641
642 Dbprintf("Simulating with fcHigh: %d, fcLow: %d, clk: %d, invert: %d, n: %d", fcHigh, fcLow, clk, invert, n);
e0165dcf 643
508b37ba 644 if (ledcontrol) LED_A_ON();
e0165dcf 645 SimulateTagLowFrequency(n, 0, ledcontrol);
508b37ba 646 if (ledcontrol) LED_A_OFF();
e09f21fa 647}
648
649// compose ask waveform for one bit(ASK)
e0165dcf 650static void askSimBit(uint8_t c, int *n, uint8_t clock, uint8_t manchester)
e09f21fa 651{
e0165dcf 652 uint8_t *dest = BigBuf_get_addr();
653 uint8_t halfClk = clock/2;
654 // c = current bit 1 or 0
655 if (manchester==1){
656 memset(dest+(*n), c, halfClk);
657 memset(dest+(*n) + halfClk, c^1, halfClk);
658 } else {
659 memset(dest+(*n), c, clock);
660 }
661 *n += clock;
e09f21fa 662}
663
b41534d1 664static void biphaseSimBit(uint8_t c, int *n, uint8_t clock, uint8_t *phase)
665{
e0165dcf 666 uint8_t *dest = BigBuf_get_addr();
667 uint8_t halfClk = clock/2;
668 if (c){
669 memset(dest+(*n), c ^ 1 ^ *phase, halfClk);
670 memset(dest+(*n) + halfClk, c ^ *phase, halfClk);
671 } else {
672 memset(dest+(*n), c ^ *phase, clock);
673 *phase ^= 1;
674 }
c728b2b4 675 *n += clock;
b41534d1 676}
677
6c68b84a 678static void stAskSimBit(int *n, uint8_t clock) {
679 uint8_t *dest = BigBuf_get_addr();
680 uint8_t halfClk = clock/2;
681 //ST = .5 high .5 low 1.5 high .5 low 1 high
682 memset(dest+(*n), 1, halfClk);
683 memset(dest+(*n) + halfClk, 0, halfClk);
684 memset(dest+(*n) + clock, 1, clock + halfClk);
685 memset(dest+(*n) + clock*2 + halfClk, 0, halfClk);
686 memset(dest+(*n) + clock*3, 1, clock);
687 *n += clock*4;
688}
689
e09f21fa 690// args clock, ask/man or askraw, invert, transmission separator
691void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
692{
f121b478 693 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
694 set_tracing(FALSE);
695
696 int ledcontrol = 1, n = 0, i = 0;
e0165dcf 697 uint8_t clk = (arg1 >> 8) & 0xFF;
2b3af97d 698 uint8_t encoding = arg1 & 0xFF;
e0165dcf 699 uint8_t separator = arg2 & 1;
700 uint8_t invert = (arg2 >> 8) & 1;
701
f121b478 702 if (encoding == 2){ //biphase
703 uint8_t phase = 0;
e0165dcf 704 for (i=0; i<size; i++){
705 biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
706 }
f121b478 707 if (phase == 1) { //run a second set inverted to keep phase in check
e0165dcf 708 for (i=0; i<size; i++){
709 biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
710 }
711 }
712 } else { // ask/manchester || ask/raw
713 for (i=0; i<size; i++){
714 askSimBit(BitStream[i]^invert, &n, clk, encoding);
715 }
ff9c043d 716 if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for ask/raw || biphase phase)
e0165dcf 717 for (i=0; i<size; i++){
718 askSimBit(BitStream[i]^invert^1, &n, clk, encoding);
719 }
720 }
721 }
6c68b84a 722 if (separator==1 && encoding == 1)
723 stAskSimBit(&n, clk);
724 else if (separator==1)
725 Dbprintf("sorry but separator option not yet available");
e0165dcf 726
f121b478 727 WDT_HIT();
728
e0165dcf 729 Dbprintf("Simulating with clk: %d, invert: %d, encoding: %d, separator: %d, n: %d",clk, invert, encoding, separator, n);
e0165dcf 730
a739812e 731 if (ledcontrol) LED_A_ON();
e0165dcf 732 SimulateTagLowFrequency(n, 0, ledcontrol);
a739812e 733 if (ledcontrol) LED_A_OFF();
e09f21fa 734}
735
736//carrier can be 2,4 or 8
737static void pskSimBit(uint8_t waveLen, int *n, uint8_t clk, uint8_t *curPhase, bool phaseChg)
738{
e0165dcf 739 uint8_t *dest = BigBuf_get_addr();
740 uint8_t halfWave = waveLen/2;
741 //uint8_t idx;
742 int i = 0;
743 if (phaseChg){
744 // write phase change
745 memset(dest+(*n), *curPhase^1, halfWave);
746 memset(dest+(*n) + halfWave, *curPhase, halfWave);
747 *n += waveLen;
748 *curPhase ^= 1;
749 i += waveLen;
750 }
751 //write each normal clock wave for the clock duration
752 for (; i < clk; i+=waveLen){
753 memset(dest+(*n), *curPhase, halfWave);
754 memset(dest+(*n) + halfWave, *curPhase^1, halfWave);
755 *n += waveLen;
756 }
e09f21fa 757}
758
759// args clock, carrier, invert,
760void CmdPSKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
761{
f121b478 762 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
763 set_tracing(FALSE);
764
765 int ledcontrol = 1, n = 0, i = 0;
e0165dcf 766 uint8_t clk = arg1 >> 8;
767 uint8_t carrier = arg1 & 0xFF;
768 uint8_t invert = arg2 & 0xFF;
769 uint8_t curPhase = 0;
770 for (i=0; i<size; i++){
771 if (BitStream[i] == curPhase){
772 pskSimBit(carrier, &n, clk, &curPhase, FALSE);
773 } else {
774 pskSimBit(carrier, &n, clk, &curPhase, TRUE);
775 }
776 }
f121b478 777
778 WDT_HIT();
779
e0165dcf 780 Dbprintf("Simulating with Carrier: %d, clk: %d, invert: %d, n: %d",carrier, clk, invert, n);
e0165dcf 781
a739812e 782 if (ledcontrol) LED_A_ON();
e0165dcf 783 SimulateTagLowFrequency(n, 0, ledcontrol);
a739812e 784 if (ledcontrol) LED_A_OFF();
e09f21fa 785}
786
787// loop to get raw HID waveform then FSK demodulate the TAG ID from it
788void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
789{
e0165dcf 790 uint8_t *dest = BigBuf_get_addr();
e0165dcf 791 size_t size = 0;
792 uint32_t hi2=0, hi=0, lo=0;
793 int idx=0;
794 // Configure to go in 125Khz listen mode
795 LFSetupFPGAForADC(95, true);
e09f21fa 796
c0f15a05 797 //clear read buffer
798 BigBuf_Clear_keep_EM();
799
6427695b 800 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
e09f21fa 801
e0165dcf 802 WDT_HIT();
803 if (ledcontrol) LED_A_ON();
e09f21fa 804
5f5b83b7 805 DoAcquisition_default(0, true);
e09f21fa 806 // FSK demodulator
b8f705e7 807 size = 50*128*2; //big enough to catch 2 sequences of largest format
e09f21fa 808 idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
e0165dcf 809
b8f705e7 810 if (idx>0 && lo>0 && (size==96 || size==192)){
811 // go over previously decoded manchester data and decode into usable tag ID
812 if (hi2 != 0){ //extra large HID tags 88/192 bits
e0165dcf 813 Dbprintf("TAG ID: %x%08x%08x (%d)",
a739812e 814 (unsigned int) hi2,
815 (unsigned int) hi,
816 (unsigned int) lo,
817 (unsigned int) (lo>>1) & 0xFFFF
818 );
614da335 819 } else { //standard HID tags 44/96 bits
e0165dcf 820 uint8_t bitlen = 0;
821 uint32_t fc = 0;
822 uint32_t cardnum = 0;
a739812e 823
e09f21fa 824 if (((hi>>5)&1) == 1){//if bit 38 is set then < 37 bit format is used
e0165dcf 825 uint32_t lo2=0;
826 lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit
827 uint8_t idx3 = 1;
e09f21fa 828 while(lo2 > 1){ //find last bit set to 1 (format len bit)
829 lo2=lo2 >> 1;
e0165dcf 830 idx3++;
831 }
e09f21fa 832 bitlen = idx3+19;
e0165dcf 833 fc =0;
834 cardnum=0;
e09f21fa 835 if(bitlen == 26){
e0165dcf 836 cardnum = (lo>>1)&0xFFFF;
837 fc = (lo>>17)&0xFF;
838 }
e09f21fa 839 if(bitlen == 37){
e0165dcf 840 cardnum = (lo>>1)&0x7FFFF;
841 fc = ((hi&0xF)<<12)|(lo>>20);
842 }
e09f21fa 843 if(bitlen == 34){
e0165dcf 844 cardnum = (lo>>1)&0xFFFF;
845 fc= ((hi&1)<<15)|(lo>>17);
846 }
e09f21fa 847 if(bitlen == 35){
e0165dcf 848 cardnum = (lo>>1)&0xFFFFF;
849 fc = ((hi&1)<<11)|(lo>>21);
850 }
851 }
852 else { //if bit 38 is not set then 37 bit format is used
853 bitlen= 37;
854 fc =0;
855 cardnum=0;
856 if(bitlen==37){
857 cardnum = (lo>>1)&0x7FFFF;
858 fc = ((hi&0xF)<<12)|(lo>>20);
859 }
860 }
e0165dcf 861 Dbprintf("TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
a739812e 862 (unsigned int) hi,
863 (unsigned int) lo,
864 (unsigned int) (lo>>1) & 0xFFFF,
865 (unsigned int) bitlen,
866 (unsigned int) fc,
867 (unsigned int) cardnum);
e0165dcf 868 }
869 if (findone){
870 if (ledcontrol) LED_A_OFF();
871 *high = hi;
872 *low = lo;
55db344f 873 break;
e0165dcf 874 }
875 // reset
e0165dcf 876 }
b8f705e7 877 hi2 = hi = lo = idx = 0;
e0165dcf 878 WDT_HIT();
879 }
501c666b 880 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
e0165dcf 881 DbpString("Stopped");
882 if (ledcontrol) LED_A_OFF();
e09f21fa 883}
884
db25599d 885// loop to get raw HID waveform then FSK demodulate the TAG ID from it
886void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
887{
888 uint8_t *dest = BigBuf_get_addr();
db25599d 889 size_t size;
890 int idx=0;
c0f15a05 891 //clear read buffer
892 BigBuf_Clear_keep_EM();
db25599d 893 // Configure to go in 125Khz listen mode
894 LFSetupFPGAForADC(95, true);
895
6427695b 896 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
db25599d 897
898 WDT_HIT();
899 if (ledcontrol) LED_A_ON();
900
901 DoAcquisition_default(-1,true);
902 // FSK demodulator
db25599d 903 size = 50*128*2; //big enough to catch 2 sequences of largest format
904 idx = AWIDdemodFSK(dest, &size);
905
a126332a 906 if (idx<=0 || size!=96) continue;
db25599d 907 // Index map
908 // 0 10 20 30 40 50 60
909 // | | | | | | |
910 // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96
911 // -----------------------------------------------------------------------------
912 // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1
913 // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96
914 // |---26 bit---| |-----117----||-------------142-------------|
915 // b = format bit len, o = odd parity of last 3 bits
916 // f = facility code, c = card number
917 // w = wiegand parity
918 // (26 bit format shown)
919
920 //get raw ID before removing parities
921 uint32_t rawLo = bytebits_to_byte(dest+idx+64,32);
922 uint32_t rawHi = bytebits_to_byte(dest+idx+32,32);
923 uint32_t rawHi2 = bytebits_to_byte(dest+idx,32);
924
925 size = removeParity(dest, idx+8, 4, 1, 88);
a126332a 926 if (size != 66) continue;
db25599d 927
928 // Index map
929 // 0 10 20 30 40 50 60
930 // | | | | | | |
931 // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456
932 // -----------------------------------------------------------------------------
933 // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000
934 // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
935 // |26 bit| |-117--| |-----142------|
c5e8b916 936 //
937 // 00110010 0 0000011111010000000000000001000100101000100001111 0 00000000
938 // bbbbbbbb w ffffffffffffffffccccccccccccccccccccccccccccccccc w xxxxxxxx
939 // |50 bit| |----4000------||-----------2248975-------------|
940 //
db25599d 941 // b = format bit len, o = odd parity of last 3 bits
942 // f = facility code, c = card number
943 // w = wiegand parity
db25599d 944
945 uint32_t fc = 0;
946 uint32_t cardnum = 0;
947 uint32_t code1 = 0;
948 uint32_t code2 = 0;
949 uint8_t fmtLen = bytebits_to_byte(dest,8);
c5e8b916 950 switch(fmtLen) {
951 case 26:
952 fc = bytebits_to_byte(dest + 9, 8);
953 cardnum = bytebits_to_byte(dest + 17, 16);
954 code1 = bytebits_to_byte(dest + 8,fmtLen);
6a4271d1 955 Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %u - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo);
c5e8b916 956 break;
957 case 50:
958 fc = bytebits_to_byte(dest + 9, 16);
959 cardnum = bytebits_to_byte(dest + 25, 32);
960 code1 = bytebits_to_byte(dest + 8, (fmtLen-32) );
961 code2 = bytebits_to_byte(dest + 8 + (fmtLen-32), 32);
6a4271d1 962 Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %u - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, code2, rawHi2, rawHi, rawLo);
c5e8b916 963 break;
964 default:
965 if (fmtLen > 32 ) {
966 cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16);
967 code1 = bytebits_to_byte(dest+8,fmtLen-32);
968 code2 = bytebits_to_byte(dest+8+(fmtLen-32),32);
6a4271d1 969 Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%u) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo);
c5e8b916 970 } else {
971 cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16);
972 code1 = bytebits_to_byte(dest+8,fmtLen);
6a4271d1 973 Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%u) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo);
c5e8b916 974 }
975 break;
db25599d 976 }
501c666b 977 if (findone)
55db344f 978 break;
501c666b 979
db25599d 980 idx = 0;
981 WDT_HIT();
982 }
55db344f 983
501c666b 984 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
db25599d 985 DbpString("Stopped");
986 if (ledcontrol) LED_A_OFF();
987}
988
e09f21fa 989void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
990{
e0165dcf 991 uint8_t *dest = BigBuf_get_addr();
992
993 size_t size=0, idx=0;
994 int clk=0, invert=0, errCnt=0, maxErr=20;
995 uint32_t hi=0;
996 uint64_t lo=0;
c0f15a05 997 //clear read buffer
998 BigBuf_Clear_keep_EM();
e0165dcf 999 // Configure to go in 125Khz listen mode
1000 LFSetupFPGAForADC(95, true);
1001
6427695b 1002 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
e0165dcf 1003
1004 WDT_HIT();
1005 if (ledcontrol) LED_A_ON();
1006
1007 DoAcquisition_default(-1,true);
1008 size = BigBuf_max_traceLen();
e0165dcf 1009 //askdemod and manchester decode
b8f705e7 1010 if (size > 16385) size = 16385; //big enough to catch 2 sequences of largest format
fef74fdc 1011 errCnt = askdemod(dest, &size, &clk, &invert, maxErr, 0, 1);
e0165dcf 1012 WDT_HIT();
1013
b8f705e7 1014 if (errCnt<0) continue;
1015
e0165dcf 1016 errCnt = Em410xDecode(dest, &size, &idx, &hi, &lo);
e0165dcf 1017 if (errCnt){
bdeac402 1018 if (size == 128){
e0165dcf 1019 Dbprintf("EM XL TAG ID: %06x%08x%08x - (%05d_%03d_%08d)",
1020 hi,
1021 (uint32_t)(lo>>32),
1022 (uint32_t)lo,
1023 (uint32_t)(lo&0xFFFF),
1024 (uint32_t)((lo>>16LL) & 0xFF),
1025 (uint32_t)(lo & 0xFFFFFF));
1026 } else {
1027 Dbprintf("EM TAG ID: %02x%08x - (%05d_%03d_%08d)",
1028 (uint32_t)(lo>>32),
1029 (uint32_t)lo,
1030 (uint32_t)(lo&0xFFFF),
1031 (uint32_t)((lo>>16LL) & 0xFF),
1032 (uint32_t)(lo & 0xFFFFFF));
1033 }
b8f705e7 1034
e0165dcf 1035 if (findone){
1036 if (ledcontrol) LED_A_OFF();
1037 *high=lo>>32;
1038 *low=lo & 0xFFFFFFFF;
55db344f 1039 break;
e0165dcf 1040 }
e0165dcf 1041 }
1042 WDT_HIT();
b8f705e7 1043 hi = lo = size = idx = 0;
1044 clk = invert = errCnt = 0;
e0165dcf 1045 }
55db344f 1046 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
e0165dcf 1047 DbpString("Stopped");
1048 if (ledcontrol) LED_A_OFF();
e09f21fa 1049}
1050
1051void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
1052{
e0165dcf 1053 uint8_t *dest = BigBuf_get_addr();
1054 int idx=0;
1055 uint32_t code=0, code2=0;
1056 uint8_t version=0;
1057 uint8_t facilitycode=0;
1058 uint16_t number=0;
b8f705e7 1059 uint8_t crc = 0;
1060 uint16_t calccrc = 0;
c0f15a05 1061
1062 //clear read buffer
1063 BigBuf_Clear_keep_EM();
1064
118bf0c2 1065 // Configure to go in 125Khz listen mode
e0165dcf 1066 LFSetupFPGAForADC(95, true);
1067
6427695b 1068 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
e0165dcf 1069 WDT_HIT();
1070 if (ledcontrol) LED_A_ON();
e09f21fa 1071 DoAcquisition_default(-1,true);
1072 //fskdemod and get start index
e0165dcf 1073 WDT_HIT();
1074 idx = IOdemodFSK(dest, BigBuf_max_traceLen());
b8f705e7 1075 if (idx<0) continue;
e0165dcf 1076 //valid tag found
1077
1078 //Index map
1079 //0 10 20 30 40 50 60
1080 //| | | | | | |
1081 //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
1082 //-----------------------------------------------------------------------------
b8f705e7 1083 //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 checksum 11
e0165dcf 1084 //
b8f705e7 1085 //Checksum:
1086 //00000000 0 11110000 1 11100000 1 00000001 1 00000011 1 10110110 1 01110101 11
1087 //preamble F0 E0 01 03 B6 75
1088 // How to calc checksum,
1089 // http://www.proxmark.org/forum/viewtopic.php?id=364&p=6
1090 // F0 + E0 + 01 + 03 + B6 = 28A
1091 // 28A & FF = 8A
1092 // FF - 8A = 75
1093 // Checksum: 0x75
e0165dcf 1094 //XSF(version)facility:codeone+codetwo
1095 //Handle the data
501c666b 1096 // if(findone){ //only print binary if we are doing one
1097 // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx], dest[idx+1], dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]);
1098 // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]);
1099 // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]);
1100 // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]);
1101 // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]);
1102 // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]);
1103 // Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]);
1104 // }
e0165dcf 1105 code = bytebits_to_byte(dest+idx,32);
1106 code2 = bytebits_to_byte(dest+idx+32,32);
1107 version = bytebits_to_byte(dest+idx+27,8); //14,4
a739812e 1108 facilitycode = bytebits_to_byte(dest+idx+18,8);
e0165dcf 1109 number = (bytebits_to_byte(dest+idx+36,8)<<8)|(bytebits_to_byte(dest+idx+45,8)); //36,9
1110
b8f705e7 1111 crc = bytebits_to_byte(dest+idx+54,8);
1112 for (uint8_t i=1; i<6; ++i)
1113 calccrc += bytebits_to_byte(dest+idx+9*i,8);
1114 calccrc &= 0xff;
1115 calccrc = 0xff - calccrc;
1116
1117 char *crcStr = (crc == calccrc) ? "ok":"!crc";
1118
1119 Dbprintf("IO Prox XSF(%02d)%02x:%05d (%08x%08x) [%02x %s]",version,facilitycode,number,code,code2, crc, crcStr);
e0165dcf 1120 // if we're only looking for one tag
1121 if (findone){
1122 if (ledcontrol) LED_A_OFF();
e0165dcf 1123 *high=code;
1124 *low=code2;
55db344f 1125 break;
e0165dcf 1126 }
1127 code=code2=0;
1128 version=facilitycode=0;
1129 number=0;
1130 idx=0;
b8f705e7 1131
e0165dcf 1132 WDT_HIT();
1133 }
61d36d36 1134 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
e0165dcf 1135 DbpString("Stopped");
1136 if (ledcontrol) LED_A_OFF();
e09f21fa 1137}
1138
1139/*------------------------------
94422fa2 1140 * T5555/T5557/T5567/T5577 routines
e09f21fa 1141 *------------------------------
1d0ccbe0 1142 * NOTE: T55x7/T5555 configuration register definitions moved to protocols.h
1143 *
1144 * Relevant communication times in microsecond
e09f21fa 1145 * To compensate antenna falling times shorten the write times
1146 * and enlarge the gap ones.
6a09bea4 1147 * Q5 tags seems to have issues when these values changes.
e09f21fa 1148 */
0de8e387 1149
8ddfbc34 1150#define START_GAP 50*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (15fc)
1151#define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (10fc)
1152#define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (24fc)
1153#define WRITE_1 54*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (56fc) 432 for T55x7; 448 for E5550
6426f6ba 1154#define READ_GAP 15*8
b8f705e7 1155
1156// VALUES TAKEN FROM EM4x function: SendForward
1157// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle)
1158// WRITE_GAP = 128; (16*8)
1159// WRITE_1 = 256 32*8; (32*8)
1160
1161// These timings work for 4469/4269/4305 (with the 55*8 above)
8ddfbc34 1162// WRITE_0 = 23*8 , 9*8
b8f705e7 1163
1164// Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK)
1165// TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz
1166// Hitag units (T0) have duration of 8 microseconds (us), which is 1/125000 per second (carrier)
1167// T0 = TIMER_CLOCK1 / 125000 = 192
e16054a4 1168// 1 Cycle = 8 microseconds(us) == 1 field clock
e09f21fa 1169
8ddfbc34 1170// new timer:
1171// = 1us = 1.5ticks
1172// 1fc = 8us = 12ticks
1173void TurnReadLFOn(uint32_t delay) {
a739812e 1174 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
1d0ccbe0 1175
1176 // measure antenna strength.
1177 //int adcval = ((MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10);
24c49d36 1178
1179 // Give it a bit of time for the resonant antenna to settle.
1180 WaitUS(delay);
a739812e 1181}
c24364a8 1182void TurnReadLF_off(uint32_t delay) {
1183 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1184 WaitUS(delay);
1185}
a739812e 1186
e09f21fa 1187// Write one bit to card
e16054a4 1188void T55xxWriteBit(int bit) {
b8f705e7 1189 if (!bit)
1d0ccbe0 1190 TurnReadLFOn(WRITE_0);
e0165dcf 1191 else
1d0ccbe0 1192 TurnReadLFOn(WRITE_1);
e0165dcf 1193 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
24c49d36 1194 WaitUS(WRITE_GAP);
e09f21fa 1195}
1196
94422fa2 1197// Send T5577 reset command then read stream (see if we can identify the start of the stream)
1198void T55xxResetRead(void) {
1199 LED_A_ON();
1200 //clear buffer now so it does not interfere with timing later
c0f15a05 1201 BigBuf_Clear_keep_EM();
94422fa2 1202
1203 // Set up FPGA, 125kHz
1204 LFSetupFPGAForADC(95, true);
1205
1206 // Trigger T55x7 in mode.
1207 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
24c49d36 1208 WaitUS(START_GAP);
94422fa2 1209
1210 // reset tag - op code 00
1211 T55xxWriteBit(0);
1212 T55xxWriteBit(0);
1213
1214 // Turn field on to read the response
1215 TurnReadLFOn(READ_GAP);
1216
1217 // Acquisition
1218 doT55x7Acquisition(BigBuf_max_traceLen());
1219
1220 // Turn the field off
1221 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
1222 cmd_send(CMD_ACK,0,0,0,0,0);
1223 LED_A_OFF();
1224}
1225
e09f21fa 1226// Write one card block in page 0, no lock
70459879 1227void T55xxWriteBlockExt(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) {
e16054a4 1228 LED_A_ON();
1d0ccbe0 1229 bool PwdMode = arg & 0x1;
1230 uint8_t Page = (arg & 0x2)>>1;
e0165dcf 1231 uint32_t i = 0;
1232
1233 // Set up FPGA, 125kHz
ac2df346 1234 LFSetupFPGAForADC(95, true);
0de8e387 1235
e16054a4 1236 // Trigger T55x7 in mode.
e0165dcf 1237 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
24c49d36 1238 WaitUS(START_GAP);
e0165dcf 1239
e16054a4 1240 // Opcode 10
e0165dcf 1241 T55xxWriteBit(1);
1d0ccbe0 1242 T55xxWriteBit(Page); //Page 0
9276e859 1243 if (PwdMode){
a739812e 1244 // Send Pwd
e0165dcf 1245 for (i = 0x80000000; i != 0; i >>= 1)
1246 T55xxWriteBit(Pwd & i);
1247 }
a739812e 1248 // Send Lock bit
e0165dcf 1249 T55xxWriteBit(0);
1250
a739812e 1251 // Send Data
e0165dcf 1252 for (i = 0x80000000; i != 0; i >>= 1)
1253 T55xxWriteBit(Data & i);
1254
a739812e 1255 // Send Block number
e0165dcf 1256 for (i = 0x04; i != 0; i >>= 1)
1257 T55xxWriteBit(Block & i);
1258
e16054a4 1259 // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
e0165dcf 1260 // so wait a little more)
e16054a4 1261 TurnReadLFOn(20 * 1000);
8ddfbc34 1262
1263 //could attempt to do a read to confirm write took
1264 // as the tag should repeat back the new block
1265 // until it is reset, but to confirm it we would
1266 // need to know the current block 0 config mode
e16054a4 1267
a739812e 1268 // turn field off
e0165dcf 1269 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
9276e859 1270 LED_A_OFF();
e09f21fa 1271}
1272
94422fa2 1273// Write one card block in page 0, no lock
70459879 1274void T55xxWriteBlock(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) {
94422fa2 1275 T55xxWriteBlockExt(Data, Block, Pwd, arg);
1276 cmd_send(CMD_ACK,0,0,0,0,0);
1277}
1278
6426f6ba 1279// Read one card block in page [page]
9276e859 1280void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
e16054a4 1281 LED_A_ON();
1d0ccbe0 1282 bool PwdMode = arg0 & 0x1;
1283 uint8_t Page = (arg0 & 0x2) >> 1;
e0165dcf 1284 uint32_t i = 0;
1d0ccbe0 1285 bool RegReadMode = (Block == 0xFF);
ac2df346 1286
a739812e 1287 //clear buffer now so it does not interfere with timing later
b4a6775b 1288 BigBuf_Clear_keep_EM();
a739812e 1289
ac2df346 1290 //make sure block is at max 7
1291 Block &= 0x7;
e0165dcf 1292
1d0ccbe0 1293 // Set up FPGA, 125kHz to power up the tag
ac2df346 1294 LFSetupFPGAForADC(95, true);
1c07ca92 1295 //SpinDelay(3);
0de8e387 1296
1d0ccbe0 1297 // Trigger T55x7 Direct Access Mode with start gap
e0165dcf 1298 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
24c49d36 1299 WaitUS(START_GAP);
ac2df346 1300
1d0ccbe0 1301 // Opcode 1[page]
e0165dcf 1302 T55xxWriteBit(1);
1c8fbeb9 1303 T55xxWriteBit(Page); //Page 0
ac2df346 1304
9276e859 1305 if (PwdMode){
a739812e 1306 // Send Pwd
e0165dcf 1307 for (i = 0x80000000; i != 0; i >>= 1)
1308 T55xxWriteBit(Pwd & i);
1309 }
a739812e 1310 // Send a zero bit separation
e0165dcf 1311 T55xxWriteBit(0);
ac2df346 1312
1d0ccbe0 1313 // Send Block number (if direct access mode)
1314 if (!RegReadMode)
b4a6775b 1315 for (i = 0x04; i != 0; i >>= 1)
1316 T55xxWriteBit(Block & i);
e0165dcf 1317
ac2df346 1318 // Turn field on to read the response
a739812e 1319 TurnReadLFOn(READ_GAP);
ac2df346 1320
1321 // Acquisition
81b7e894 1322 doT55x7Acquisition(7679);
ac2df346 1323
1d0ccbe0 1324 // Turn the field off
1325 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
e0165dcf 1326 cmd_send(CMD_ACK,0,0,0,0,0);
e16054a4 1327 LED_A_OFF();
9276e859 1328}
1329
1330void T55xxWakeUp(uint32_t Pwd){
1331 LED_B_ON();
1332 uint32_t i = 0;
1333
1334 // Set up FPGA, 125kHz
1335 LFSetupFPGAForADC(95, true);
1336
1337 // Trigger T55x7 Direct Access Mode
1338 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
24c49d36 1339 WaitUS(START_GAP);
9276e859 1340
1341 // Opcode 10
1342 T55xxWriteBit(1);
1343 T55xxWriteBit(0); //Page 0
1344
1345 // Send Pwd
1346 for (i = 0x80000000; i != 0; i >>= 1)
1347 T55xxWriteBit(Pwd & i);
1348
1d0ccbe0 1349 // Turn and leave field on to let the begin repeating transmission
1c8fbeb9 1350 TurnReadLFOn(20*1000);
e09f21fa 1351}
1352
1353/*-------------- Cloning routines -----------*/
1d0ccbe0 1354void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) {
1355 // write last block first and config block last (if included)
70459879 1356 for (uint8_t i = numblocks+startblock; i > startblock; i--)
8ce3e4b4 1357 T55xxWriteBlockExt(blockdata[i-1], i-1, 0, 0);
1d0ccbe0 1358}
1359
e09f21fa 1360// Copy HID id to card and setup block 0 config
1d0ccbe0 1361void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) {
1362 uint32_t data[] = {0,0,0,0,0,0,0};
1d0ccbe0 1363 uint8_t last_block = 0;
e0165dcf 1364
1365 if (longFMT){
1366 // Ensure no more than 84 bits supplied
614da335 1367 if (hi2 > 0xFFFFF) {
e0165dcf 1368 DbpString("Tags can only have 84 bits.");
1369 return;
1370 }
1371 // Build the 6 data blocks for supplied 84bit ID
1372 last_block = 6;
1d0ccbe0 1373 // load preamble (1D) & long format identifier (9E manchester encoded)
94422fa2 1374 data[1] = 0x1D96A900 | (manchesterEncode2Bytes((hi2 >> 16) & 0xF) & 0xFF);
1d0ccbe0 1375 // load raw id from hi2, hi, lo to data blocks (manchester encoded)
1376 data[2] = manchesterEncode2Bytes(hi2 & 0xFFFF);
1377 data[3] = manchesterEncode2Bytes(hi >> 16);
1378 data[4] = manchesterEncode2Bytes(hi & 0xFFFF);
1379 data[5] = manchesterEncode2Bytes(lo >> 16);
1380 data[6] = manchesterEncode2Bytes(lo & 0xFFFF);
42c235e7 1381 } else {
e0165dcf 1382 // Ensure no more than 44 bits supplied
614da335 1383 if (hi > 0xFFF) {
e0165dcf 1384 DbpString("Tags can only have 44 bits.");
1385 return;
1386 }
e0165dcf 1387 // Build the 3 data blocks for supplied 44bit ID
1388 last_block = 3;
1d0ccbe0 1389 // load preamble
94422fa2 1390 data[1] = 0x1D000000 | (manchesterEncode2Bytes(hi) & 0xFFFFFF);
1d0ccbe0 1391 data[2] = manchesterEncode2Bytes(lo >> 16);
1392 data[3] = manchesterEncode2Bytes(lo & 0xFFFF);
e0165dcf 1393 }
1d0ccbe0 1394 // load chip config block
1395 data[0] = T55x7_BITRATE_RF_50 | T55x7_MODULATION_FSK2a | last_block << T55x7_MAXBLOCK_SHIFT;
e0165dcf 1396
edaf10af 1397 //TODO add selection of chip for Q5 or T55x7
ff9c043d 1398 // data[0] = (((50-2)>>1)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_FSK2 | T5555_INVERT_OUTPUT | last_block << T5555_MAXBLOCK_SHIFT;
edaf10af 1399
e0165dcf 1400 LED_D_ON();
1d0ccbe0 1401 WriteT55xx(data, 0, last_block+1);
e0165dcf 1402 LED_D_OFF();
e09f21fa 1403}
1404
94422fa2 1405void CopyIOtoT55x7(uint32_t hi, uint32_t lo) {
1d0ccbe0 1406 uint32_t data[] = {T55x7_BITRATE_RF_64 | T55x7_MODULATION_FSK2a | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo};
edaf10af 1407 //TODO add selection of chip for Q5 or T55x7
118bf0c2 1408 //t5555 (Q5) BITRATE = (RF-2)/2 (iceman)
ff9c043d 1409 // data[0] = ( ((64-2)>>1) << T5555_BITRATE_SHIFT) | T5555_MODULATION_FSK2 | T5555_INVERT_OUTPUT | 2 << T5555_MAXBLOCK_SHIFT;
e09f21fa 1410
e0165dcf 1411 LED_D_ON();
1412 // Program the data blocks for supplied ID
1d0ccbe0 1413 // and the block 0 config
1414 WriteT55xx(data, 0, 3);
e0165dcf 1415 LED_D_OFF();
e09f21fa 1416}
1417
1d0ccbe0 1418// Clone Indala 64-bit tag by UID to T55x7
1419void CopyIndala64toT55x7(uint32_t hi, uint32_t lo) {
1420 //Program the 2 data blocks for supplied 64bit UID
1421 // and the Config for Indala 64 format (RF/32;PSK1 with RF/2;Maxblock=2)
1422 uint32_t data[] = { T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo};
edaf10af 1423 //TODO add selection of chip for Q5 or T55x7
ff9c043d 1424 // data[0] = (((32-2)>>1)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 2 << T5555_MAXBLOCK_SHIFT;
edaf10af 1425
1d0ccbe0 1426 WriteT55xx(data, 0, 3);
1427 //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
1428 // T5567WriteBlock(0x603E1042,0);
1d0ccbe0 1429}
1430// Clone Indala 224-bit tag by UID to T55x7
94422fa2 1431void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t uid4, uint32_t uid5, uint32_t uid6, uint32_t uid7) {
1d0ccbe0 1432 //Program the 7 data blocks for supplied 224bit UID
1433 uint32_t data[] = {0, uid1, uid2, uid3, uid4, uid5, uid6, uid7};
1434 // and the block 0 for Indala224 format
1435 //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
1436 data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (7 << T55x7_MAXBLOCK_SHIFT);
edaf10af 1437 //TODO add selection of chip for Q5 or T55x7
ff9c043d 1438 // data[0] = (((32-2)>>1) << T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 7 << T5555_MAXBLOCK_SHIFT;
1d0ccbe0 1439 WriteT55xx(data, 0, 8);
1440 //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
1441 // T5567WriteBlock(0x603E10E2,0);
1d0ccbe0 1442}
a126332a 1443// clone viking tag to T55xx
1444void CopyVikingtoT55xx(uint32_t block1, uint32_t block2, uint8_t Q5) {
1445 uint32_t data[] = {T55x7_BITRATE_RF_32 | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT), block1, block2};
118bf0c2 1446 //t5555 (Q5) BITRATE = (RF-2)/2 (iceman)
ff9c043d 1447 if (Q5) data[0] = (((32-2)>>1) << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | 2 << T5555_MAXBLOCK_SHIFT;
a126332a 1448 // Program the data blocks for supplied ID and the block 0 config
1449 WriteT55xx(data, 0, 3);
1450 LED_D_OFF();
1451 cmd_send(CMD_ACK,0,0,0,0,0);
1452}
1d0ccbe0 1453
e09f21fa 1454// Define 9bit header for EM410x tags
1455#define EM410X_HEADER 0x1FF
1456#define EM410X_ID_LENGTH 40
1457
94422fa2 1458void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) {
e0165dcf 1459 int i, id_bit;
1460 uint64_t id = EM410X_HEADER;
1461 uint64_t rev_id = 0; // reversed ID
1462 int c_parity[4]; // column parity
1463 int r_parity = 0; // row parity
1464 uint32_t clock = 0;
1465
1466 // Reverse ID bits given as parameter (for simpler operations)
1467 for (i = 0; i < EM410X_ID_LENGTH; ++i) {
1468 if (i < 32) {
1469 rev_id = (rev_id << 1) | (id_lo & 1);
1470 id_lo >>= 1;
1471 } else {
1472 rev_id = (rev_id << 1) | (id_hi & 1);
1473 id_hi >>= 1;
1474 }
1475 }
1476
1477 for (i = 0; i < EM410X_ID_LENGTH; ++i) {
1478 id_bit = rev_id & 1;
1479
1480 if (i % 4 == 0) {
1481 // Don't write row parity bit at start of parsing
1482 if (i)
1483 id = (id << 1) | r_parity;
1484 // Start counting parity for new row
1485 r_parity = id_bit;
1486 } else {
1487 // Count row parity
1488 r_parity ^= id_bit;
1489 }
1490
1491 // First elements in column?
1492 if (i < 4)
1493 // Fill out first elements
1494 c_parity[i] = id_bit;
1495 else
1496 // Count column parity
1497 c_parity[i % 4] ^= id_bit;
1498
1499 // Insert ID bit
1500 id = (id << 1) | id_bit;
1501 rev_id >>= 1;
1502 }
1503
1504 // Insert parity bit of last row
1505 id = (id << 1) | r_parity;
1506
1507 // Fill out column parity at the end of tag
1508 for (i = 0; i < 4; ++i)
1509 id = (id << 1) | c_parity[i];
1510
1511 // Add stop bit
1512 id <<= 1;
1513
1514 Dbprintf("Started writing %s tag ...", card ? "T55x7":"T5555");
1515 LED_D_ON();
1516
1517 // Write EM410x ID
6c68b84a 1518 uint32_t data[] = {0, (uint32_t)(id>>32), (uint32_t)(id & 0xFFFFFFFF)};
edaf10af 1519
8ce3e4b4 1520 clock = (card & 0xFF00) >> 8;
1521 clock = (clock == 0) ? 64 : clock;
1522 Dbprintf("Clock rate: %d", clock);
edaf10af 1523 if (card & 0xFF) { //t55x7
1d0ccbe0 1524 clock = GetT55xxClockBit(clock);
1525 if (clock == 0) {
e0165dcf 1526 Dbprintf("Invalid clock rate: %d", clock);
1527 return;
1528 }
1d0ccbe0 1529 data[0] = clock | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT);
edaf10af 1530 } else { //t5555 (Q5)
ff9c043d 1531 // t5555 (Q5) BITRATE = (RF-2)/2 (iceman)
1532 data[0] = ( ((clock-2) >> 1) << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | (2 << T5555_MAXBLOCK_SHIFT);
e0165dcf 1533 }
118bf0c2 1534
1d0ccbe0 1535 WriteT55xx(data, 0, 3);
e0165dcf 1536
1537 LED_D_OFF();
8ce3e4b4 1538 Dbprintf("Tag %s written with 0x%08x%08x\n",
1539 card ? "T55x7":"T5555",
1540 (uint32_t)(id >> 32),
1541 (uint32_t)id);
e09f21fa 1542}
1543
e09f21fa 1544//-----------------------------------
1545// EM4469 / EM4305 routines
1546//-----------------------------------
cb1ba30a 1547// Below given command set.
1548// Commands are including the even parity, binary mirrored
1549#define FWD_CMD_LOGIN 0xC
8ddfbc34 1550#define FWD_CMD_WRITE 0xA
1551#define FWD_CMD_READ 0x9
e09f21fa 1552#define FWD_CMD_DISABLE 0x5
1553
e09f21fa 1554uint8_t forwardLink_data[64]; //array of forwarded bits
1555uint8_t * forward_ptr; //ptr for forward message preparation
1556uint8_t fwd_bit_sz; //forwardlink bit counter
1557uint8_t * fwd_write_ptr; //forwardlink bit pointer
1558
1559//====================================================================
1560// prepares command bits
1561// see EM4469 spec
1562//====================================================================
6426f6ba 1563//--------------------------------------------------------------------
1564// VALUES TAKEN FROM EM4x function: SendForward
1565// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle)
1566// WRITE_GAP = 128; (16*8)
1567// WRITE_1 = 256 32*8; (32*8)
1568
1569// These timings work for 4469/4269/4305 (with the 55*8 above)
8ddfbc34 1570// WRITE_0 = 23*8 , 9*8
6426f6ba 1571
e09f21fa 1572uint8_t Prepare_Cmd( uint8_t cmd ) {
e09f21fa 1573
e0165dcf 1574 *forward_ptr++ = 0; //start bit
1575 *forward_ptr++ = 0; //second pause for 4050 code
e09f21fa 1576
e0165dcf 1577 *forward_ptr++ = cmd;
1578 cmd >>= 1;
1579 *forward_ptr++ = cmd;
1580 cmd >>= 1;
1581 *forward_ptr++ = cmd;
1582 cmd >>= 1;
1583 *forward_ptr++ = cmd;
e09f21fa 1584
e0165dcf 1585 return 6; //return number of emited bits
e09f21fa 1586}
1587
1588//====================================================================
1589// prepares address bits
1590// see EM4469 spec
1591//====================================================================
e09f21fa 1592uint8_t Prepare_Addr( uint8_t addr ) {
e09f21fa 1593
e0165dcf 1594 register uint8_t line_parity;
e09f21fa 1595
e0165dcf 1596 uint8_t i;
1597 line_parity = 0;
cb1ba30a 1598 for( i=0; i<6; i++ ) {
e0165dcf 1599 *forward_ptr++ = addr;
1600 line_parity ^= addr;
1601 addr >>= 1;
1602 }
e09f21fa 1603
e0165dcf 1604 *forward_ptr++ = (line_parity & 1);
e09f21fa 1605
e0165dcf 1606 return 7; //return number of emited bits
e09f21fa 1607}
1608
1609//====================================================================
1610// prepares data bits intreleaved with parity bits
1611// see EM4469 spec
1612//====================================================================
e09f21fa 1613uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) {
e0165dcf 1614
1615 register uint8_t line_parity;
1616 register uint8_t column_parity;
1617 register uint8_t i, j;
1618 register uint16_t data;
1619
1620 data = data_low;
1621 column_parity = 0;
1622
1623 for(i=0; i<4; i++) {
1624 line_parity = 0;
1625 for(j=0; j<8; j++) {
1626 line_parity ^= data;
1627 column_parity ^= (data & 1) << j;
1628 *forward_ptr++ = data;
1629 data >>= 1;
1630 }
1631 *forward_ptr++ = line_parity;
1632 if(i == 1)
1633 data = data_hi;
1634 }
1635
1636 for(j=0; j<8; j++) {
1637 *forward_ptr++ = column_parity;
1638 column_parity >>= 1;
1639 }
1640 *forward_ptr = 0;
1641
1642 return 45; //return number of emited bits
e09f21fa 1643}
1644
1645//====================================================================
1646// Forward Link send function
1647// Requires: forwarLink_data filled with valid bits (1 bit per byte)
1648// fwd_bit_count set with number of bits to be sent
1649//====================================================================
1650void SendForward(uint8_t fwd_bit_count) {
1651
cb1ba30a 1652// iceman, 21.3us increments for the USclock verification.
1653// 55FC * 8us == 440us / 21.3 === 20.65 steps. could be too short. Go for 56FC instead
1654// 32FC * 8us == 256us / 21.3 == 12.018 steps. ok
1655// 16FC * 8us == 128us / 21.3 == 6.009 steps. ok
cb1ba30a 1656#ifndef EM_START_GAP
c24364a8 1657#define EM_START_GAP 55*8
cb1ba30a 1658#endif
1659
e0165dcf 1660 fwd_write_ptr = forwardLink_data;
1661 fwd_bit_sz = fwd_bit_count;
1662
6a09bea4 1663 // Set up FPGA, 125kHz
1664 LFSetupFPGAForADC(95, true);
1665
e0165dcf 1666 // force 1st mod pulse (start gap must be longer for 4305)
1667 fwd_bit_sz--; //prepare next bit modulation
1668 fwd_write_ptr++;
cb1ba30a 1669
c24364a8 1670 TurnReadLF_off(EM_START_GAP);
1671 TurnReadLFOn(18*8);
e0165dcf 1672
cb1ba30a 1673 // now start writting with bitbanging the antenna.
e0165dcf 1674 while(fwd_bit_sz-- > 0) { //prepare next bit modulation
c24364a8 1675 if(((*fwd_write_ptr++) & 1) == 1) {
1676 WaitUS(32);
1677 } else {
1678 TurnReadLF_off(23*8);
bdeac402 1679 TurnReadLFOn(16*8);
e0165dcf 1680 }
1681 }
e09f21fa 1682}
1683
cb1ba30a 1684void EM4xLogin(uint32_t pwd) {
1685 uint8_t len;
e0165dcf 1686 forward_ptr = forwardLink_data;
cb1ba30a 1687 len = Prepare_Cmd( FWD_CMD_LOGIN );
1688 len += Prepare_Data( pwd & 0xFFFF, pwd >> 16 );
1689 SendForward(len);
c24364a8 1690 //WaitUS(20); // no wait for login command.
ff9c043d 1691 // should receive
1692 // 0000 1010 ok.
1693 // 0000 0001 fail
e09f21fa 1694}
1695
cb1ba30a 1696void EM4xReadWord(uint8_t addr, uint32_t pwd, uint8_t usepwd) {
e09f21fa 1697
cb1ba30a 1698 LED_A_ON();
cb1ba30a 1699 uint8_t len;
1700
1701 //clear buffer now so it does not interfere with timing later
a739812e 1702 BigBuf_Clear_ext(false);
b8f705e7 1703
ff9c043d 1704 /* should we read answer from Logincommand?
1705 *
1706 * should receive
1707 * 0000 1010 ok.
1708 * 0000 0001 fail
1709 **/
cb1ba30a 1710 if (usepwd) EM4xLogin(pwd);
e0165dcf 1711
1712 forward_ptr = forwardLink_data;
cb1ba30a 1713 len = Prepare_Cmd( FWD_CMD_READ );
1714 len += Prepare_Addr( addr );
e0165dcf 1715
cb1ba30a 1716 SendForward(len);
e0165dcf 1717
17556415 1718 WaitUS(400);
c24364a8 1719
17556415 1720 DoPartialAcquisition(20, true, 6000);
6a09bea4 1721
cb1ba30a 1722 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
b8f705e7 1723 cmd_send(CMD_ACK,0,0,0,0,0);
cb1ba30a 1724 LED_A_OFF();
e09f21fa 1725}
1726
cb1ba30a 1727void EM4xWriteWord(uint32_t flag, uint32_t data, uint32_t pwd) {
e09f21fa 1728
cb1ba30a 1729 LED_A_ON();
1730
1731 bool usePwd = (flag & 0xF);
1732 uint8_t addr = (flag >> 8) & 0xFF;
1733 uint8_t len;
1734
1735 //clear buffer now so it does not interfere with timing later
1736 BigBuf_Clear_ext(false);
ff9c043d 1737
1738 /* should we read answer from Logincommand?
1739 *
1740 * should receive
1741 * 0000 1010 ok.
1742 * 0000 0001 fail
1743 **/
cb1ba30a 1744 if (usePwd) EM4xLogin(pwd);
e09f21fa 1745
e0165dcf 1746 forward_ptr = forwardLink_data;
cb1ba30a 1747 len = Prepare_Cmd( FWD_CMD_WRITE );
1748 len += Prepare_Addr( addr );
1749 len += Prepare_Data( data & 0xFFFF, data >> 16 );
e09f21fa 1750
cb1ba30a 1751 SendForward(len);
e09f21fa 1752
4ac9f078 1753 //Wait 20ms for write to complete?
c24364a8 1754 WaitMS(7);
4ac9f078 1755
1756 //Capture response if one exists
17556415 1757 DoPartialAcquisition(20, true, 6000);
4ac9f078 1758
cb1ba30a 1759 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1760 cmd_send(CMD_ACK,0,0,0,0,0);
1761 LED_A_OFF();
e09f21fa 1762}
4653da43 1763
5f5b83b7 1764/*
1765Reading a COTAG.
1766
1767COTAG needs the reader to send a startsequence and the card has an extreme slow datarate.
1768because of this, we can "sample" the data signal but we interpreate it to Manchester direct.
1769
1770READER START SEQUENCE:
1771burst 800 us, gap 2.2 msecs
1772burst 3.6 msecs gap 2.2 msecs
1773burst 800 us gap 2.2 msecs
1774pulse 3.6 msecs
1775
1776This triggers a COTAG tag to response
1777*/
1778void Cotag(uint32_t arg0) {
cb1ba30a 1779#ifndef OFF
1780# define OFF { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); WaitUS(2035); }
1781#endif
1782#ifndef ON
1783# define ON(x) { FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); WaitUS((x)); }
1784#endif
5f5b83b7 1785 uint8_t rawsignal = arg0 & 0xF;
1786
1787 LED_A_ON();
1788
1789 // Switching to LF image on FPGA. This might empty BigBuff
1790 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
4653da43 1791
1792 //clear buffer now so it does not interfere with timing later
b828a4e1 1793 BigBuf_Clear_ext(false);
5f5b83b7 1794
1795 // Set up FPGA, 132kHz to power up the tag
4653da43 1796 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 89);
1797 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
1798
1799 // Connect the A/D to the peak-detected low-frequency path.
1800 SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
1801
4653da43 1802 // Now set up the SSC to get the ADC samples that are now streaming at us.
1803 FpgaSetupSsc();
b828a4e1 1804
5f5b83b7 1805 // start clock - 1.5ticks is 1us
4653da43 1806 StartTicks();
1807
5f5b83b7 1808 //send COTAG start pulse
507afbf3 1809 ON(740) OFF
1810 ON(3330) OFF
1811 ON(740) OFF
1812 ON(1000)
1813
5f5b83b7 1814 switch(rawsignal) {
1815 case 0: doCotagAcquisition(50000); break;
1816 case 1: doCotagAcquisitionManchester(); break;
1817 case 2: DoAcquisition_config(TRUE); break;
1818 }
4653da43 1819
1820 // Turn the field off
1821 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
1822 cmd_send(CMD_ACK,0,0,0,0,0);
1823 LED_A_OFF();
1824}
cb1ba30a 1825
1826/*
1827* EM4305 support
1828*/
Impressum, Datenschutz