]> git.zerfleddert.de Git - proxmark3-svn/blame - client/lualibs/commands.lua
add wake option to t55xx read command
[proxmark3-svn] / client / lualibs / commands.lua
CommitLineData
21452811 1--[[
2These are command definitions. This file should correspond exactly to usb_cmd.h.
3--]]
4--// For the bootloader
5local _commands = {
6 CMD_DEVICE_INFO = 0x0000,
7 CMD_SETUP_WRITE = 0x0001,
8 CMD_FINISH_WRITE = 0x0003,
9 CMD_HARDWARE_RESET = 0x0004,
10 CMD_START_FLASH = 0x0005,
11 CMD_NACK = 0x00fe,
12 CMD_ACK = 0x00ff,
13
14 --// For general mucking around
15 CMD_DEBUG_PRINT_STRING = 0x0100,
16 CMD_DEBUG_PRINT_INTEGERS = 0x0101,
17 CMD_DEBUG_PRINT_BYTES = 0x0102,
18 CMD_LCD_RESET = 0x0103,
19 CMD_LCD = 0x0104,
20 CMD_BUFF_CLEAR = 0x0105,
21 CMD_READ_MEM = 0x0106,
22 CMD_VERSION = 0x0107,
e2012d1b
MHS
23 CMD_STATUS = 0x0108,
24 CMD_PING = 0x0109,
21452811 25 --// For low-frequency tags
26 CMD_READ_TI_TYPE = 0x0202,
27 CMD_WRITE_TI_TYPE = 0x0203,
28 CMD_DOWNLOADED_RAW_BITS_TI_TYPE = 0x0204,
29 CMD_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0205,
30 CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0206,
31 CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K = 0x0207,
32 CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K = 0x0208,
33 CMD_DOWNLOADED_SIM_SAMPLES_125K = 0x0209,
34 CMD_SIMULATE_TAG_125K = 0x020A,
35 CMD_HID_DEMOD_FSK = 0x020B,
36 CMD_HID_SIM_TAG = 0x020C,
37 CMD_SET_LF_DIVISOR = 0x020D,
38 CMD_LF_SIMULATE_BIDIR = 0x020E,
39 CMD_SET_ADC_MUX = 0x020F,
40 CMD_HID_CLONE_TAG = 0x0210,
41 CMD_EM410X_WRITE_TAG = 0x0211,
42 CMD_INDALA_CLONE_TAG = 0x0212,
43 --// for 224 bits UID
44 CMD_INDALA_CLONE_TAG_L = 0x0213,
45 CMD_T55XX_READ_BLOCK = 0x0214,
46 CMD_T55XX_WRITE_BLOCK = 0x0215,
47 CMD_T55XX_READ_TRACE = 0x0216,
48 CMD_PCF7931_READ = 0x0217,
49 CMD_EM4X_READ_WORD = 0x0218,
50 CMD_EM4X_WRITE_WORD = 0x0219,
66707a3b 51 CMD_IO_DEMOD_FSK = 0x021A,
abd6112f 52 CMD_IO_CLONE_TAG = 0x021B,
53 CMD_EM410X_DEMOD = 0x021c,
54 CMD_SET_LF_SAMPLING_CONFIG = 0x021d,
55 CMD_FSK_SIM_TAG = 0x021E,
56 CMD_ASK_SIM_TAG = 0x021F,
872e3d4d 57 CMD_PSK_SIM_TAG = 0x0220,
c0c35f9b 58 CMD_AWID_DEMOD_FSK = 0x0221,
abd6112f 59
21452811 60 --/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
61
62 --// For the 13.56 MHz tags
63 CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 = 0x0300,
21452811 64 CMD_READ_SRI512_TAG = 0x0303,
65 CMD_READ_SRIX4K_TAG = 0x0304,
66 CMD_READER_ISO_15693 = 0x0310,
67 CMD_SIMTAG_ISO_15693 = 0x0311,
68 CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 = 0x0312,
69 CMD_ISO_15693_COMMAND = 0x0313,
70 CMD_ISO_15693_COMMAND_DONE = 0x0314,
71 CMD_ISO_15693_FIND_AFI = 0x0315,
72 CMD_ISO_15693_DEBUG = 0x0316,
3af373f3 73 CMD_LF_SNOOP_RAW_ADC_SAMPLES = 0x0317,
21452811 74
75 --// For Hitag2 transponders
76 CMD_SNOOP_HITAG = 0x0370,
77 CMD_SIMULATE_HITAG = 0x0371,
78 CMD_READER_HITAG = 0x0372,
79
132a0217 80 CMD_SIMULATE_TAG_ISO_14443B = 0x0381,
81 CMD_SNOOP_ISO_14443B = 0x0382,
21452811 82 CMD_SNOOP_ISO_14443a = 0x0383,
83 CMD_SIMULATE_TAG_ISO_14443a = 0x0384,
84 CMD_READER_ISO_14443a = 0x0385,
85 CMD_SIMULATE_TAG_LEGIC_RF = 0x0387,
86 CMD_READER_LEGIC_RF = 0x0388,
87 CMD_WRITER_LEGIC_RF = 0x0389,
88 CMD_EPA_PACE_COLLECT_NONCE = 0x038A,
3af373f3 89 --//CMD_EPA_ = 0x038B,
21452811 90
3ac22ee1 91 CMD_ICLASS_READCHECK = 0x038F,
aa53efc3 92 CMD_ICLASS_CLONE = 0x0390,
93 CMD_ICLASS_DUMP = 0x0391,
21452811 94 CMD_SNOOP_ICLASS = 0x0392,
95 CMD_SIMULATE_TAG_ICLASS = 0x0393,
96 CMD_READER_ICLASS = 0x0394,
aa53efc3 97 CMD_READER_ICLASS_REPLAY = 0x0395,
98 CMD_ICLASS_READBLOCK = 0x0396,
99 CMD_ICLASS_WRITEBLOCK = 0x0397,
100 CMD_ICLASS_EML_MEMSET = 0x0398,
101 CMD_ICLASS_AUTHENTICATION = 0x0399,
21452811 102
103 --// For measurements of the antenna tuning
104 CMD_MEASURE_ANTENNA_TUNING = 0x0400,
105 CMD_MEASURE_ANTENNA_TUNING_HF = 0x0401,
106 CMD_MEASURED_ANTENNA_TUNING = 0x0410,
107 CMD_LISTEN_READER_FIELD = 0x0420,
108
109 --// For direct FPGA control
110 CMD_FPGA_MAJOR_MODE_OFF = 0x0500,
111
112 --// For mifare commands
113 CMD_MIFARE_SET_DBGMODE = 0x0600,
114 CMD_MIFARE_EML_MEMCLR = 0x0601,
115 CMD_MIFARE_EML_MEMSET = 0x0602,
116 CMD_MIFARE_EML_MEMGET = 0x0603,
117 CMD_MIFARE_EML_CARDLOAD = 0x0604,
b915fda3 118
119 --// magic chinese card commands
120 CMD_MIFARE_CSETBLOCK = 0x0605,
121 CMD_MIFARE_CGETBLOCK = 0x0606,
122 CMD_MIFARE_CIDENT = 0x0607,
21452811 123
124 CMD_SIMULATE_MIFARE_CARD = 0x0610,
125
126 CMD_READER_MIFARE = 0x0611,
127 CMD_MIFARE_NESTED = 0x0612,
128
129 CMD_MIFARE_READBL = 0x0620,
3af373f3 130 CMD_MIFAREU_READBL = 0x0720,
131
21452811 132 CMD_MIFARE_READSC = 0x0621,
3af373f3 133 CMD_MIFAREU_READCARD = 0x0721,
134
21452811 135 CMD_MIFARE_WRITEBL = 0x0622,
3af373f3 136 CMD_MIFAREU_WRITEBL = 0x0722,
137 CMD_MIFAREU_WRITEBL_COMPAT = 0x0723,
138
21452811 139 CMD_MIFARE_CHKKEYS = 0x0623,
140
141 CMD_MIFARE_SNIFFER = 0x0630,
142
3af373f3 143 --//ultralightC
9d87eb66 144 CMD_MIFAREUC_AUTH = 0x0724,
145 CMD_MIFAREUC_SETPWD = 0x0727,
146 CMD_MIFAREU_SETUID = 0x0728,
3af373f3 147
148 --// mifare desfire
149 CMD_MIFARE_DESFIRE_READBL = 0x0728,
150 CMD_MIFARE_DESFIRE_WRITEBL = 0x0729,
151 CMD_MIFARE_DESFIRE_AUTH1 = 0x072a,
152 CMD_MIFARE_DESFIRE_AUTH2 = 0x072b,
153 CMD_MIFARE_DES_READER = 0x072c,
154 CMD_MIFARE_DESFIRE_INFO = 0x072d,
155 CMD_MIFARE_DESFIRE = 0x072e,
156
21452811 157 CMD_UNKNOWN = 0xFFFF,
158}
159
160
161local _reverse_lookup,k,v = {}
9ccfb3a8 162 for k, v in pairs(_commands) do
163 _reverse_lookup[v] = k
164 end
165 _commands.tostring = function(command)
21452811 166 if(type(command) == 'number') then
167 return ("%s (%d)"):format(_reverse_lookup[command]or "ERROR UNDEFINED!", command)
168 end
169 return ("Error, numeric argument expected, got : %s"):format(tostring(command))
170end
171
172Command = {
173
174 new = function(self, o)
175
176 local o = o or {} -- create object if user does not provide one
177 setmetatable(o, self) -- DIY inheritance a'la javascript
178 self.__index = self
179
180 o.cmd = o.cmd or _commands.CMD_UNKNOWN
181 --o.arg1 = "test"
182 o.arg1 = o.arg1 or 0
183 o.arg2 = o.arg2 or 0
184 o.arg3 = o.arg3 or 0
185 local data = o.data or "0"
186
187 if(type(data) == 'string') then
188 -- We need to check if it is correct length, otherwise pad it
189 local len = string.len(data)
190 if(len < 1024) then
191 --Should be 1024 hex characters to represent 512 bytes of data
192 data = data .. string.rep("0",1024 - len )
193 end
194 if(len > 1024) then
195 -- OOps, a bit too much data here
196 print( ( "WARNING: data size too large, was %s chars, will be truncated "):format(len) )
197 --
198 data = data:sub(1,1024)
199 end
200 else
201 print(("WARNING; data was NOT a (hex-) string, but was %s"):format(type(data)))
202 end
203 o.data = data
204
205 return o
206 end,
4df3eb3f 207 parse = function (packet)
208 local count,cmd,arg1,arg2,arg3,data = bin.unpack('LLLLH512',packet)
209 return Command:new{cmd = cmd, arg1 = arg1, arg2 = arg2, arg3 = arg3, data = data}
210 end,
21452811 211}
212function Command:__tostring()
213 local output = ("%s\r\nargs : (%s, %s, %s)\r\ndata:\r\n%s\r\n"):format(
214 _commands.tostring(self.cmd),
215 tostring(self.arg1),
216 tostring(self.arg2),
217 tostring(self.arg3),
218 tostring(self.data))
219 return output
220end
221function Command:getBytes()
222 --If a hex-string has been used
223 local data = self.data
224 local cmd = self.cmd
225 local arg1, arg2, arg3 = self.arg1, self.arg2, self.arg3
9ccfb3a8 226 return bin.pack("LLLLH",cmd, arg1, arg2, arg3, data);
21452811 227end
abd6112f 228return _commands
Impressum, Datenschutz