target and bitstream back to front!

[proxmark3-svn] / include / usb_cmd.h

//-----------------------------------------------------------------------------
// Jonathan Westhues, Mar 2006
// Edits by Gerhard de Koning Gans, Sep 2007
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Definitions for all the types of commands that may be sent over USB; our
// own protocol.
//-----------------------------------------------------------------------------

#ifndef __USB_CMD_H
#define __USB_CMD_H
#ifdef _MSC_VER
typedef DWORD uint32_t;
typedef BYTE uint8_t;
#define PACKED
// stuff
#else
#include <stdint.h>
#include <stdbool.h>
#define PACKED __attribute__((packed))
#endif

typedef struct {
	uint32_t	cmd;
	uint32_t	arg[3];
	union {
		uint8_t		asBytes[48];
		uint32_t	asDwords[12];
	} d;
} PACKED UsbCommand;

// For the bootloader
#define CMD_DEVICE_INFO								0x0000
#define CMD_SETUP_WRITE								0x0001
#define CMD_FINISH_WRITE							0x0003
#define CMD_HARDWARE_RESET						0x0004
#define CMD_START_FLASH								0x0005
#define CMD_NACK											0x00fe
#define CMD_ACK												0x00ff

// For general mucking around
#define CMD_DEBUG_PRINT_STRING				0x0100
#define CMD_DEBUG_PRINT_INTEGERS			0x0101
#define CMD_DEBUG_PRINT_BYTES					0x0102
#define CMD_LCD_RESET									0x0103
#define CMD_LCD												0x0104
#define CMD_BUFF_CLEAR								0x0105
#define CMD_READ_MEM									0x0106
#define CMD_VERSION										0x0107

// For low-frequency tags
#define CMD_READ_TI_TYPE														0x0202
#define CMD_WRITE_TI_TYPE														0x0203
#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE							0x0204
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K						0x0205
#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K		0x0206
#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K						0x0207
#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K					0x0208
#define CMD_DOWNLOADED_SIM_SAMPLES_125K							0x0209
#define CMD_SIMULATE_TAG_125K												0x020A
#define CMD_HID_DEMOD_FSK								0x020B
#define CMD_HID_SIM_TAG									0x020C
#define CMD_SET_LF_DIVISOR							0x020D
#define CMD_LF_SIMULATE_BIDIR						0x020E
#define CMD_SET_ADC_MUX									0x020F
#define CMD_HID_CLONE_TAG								0x0210
#define CMD_EM410X_WRITE_TAG						0x0211
#define CMD_INDALA_CLONE_TAG						0x0212
#define CMD_INDALA_CLONE_TAG_L					0x0213	// for 224 bits UID

/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */

// For the 13.56 MHz tags
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693		0x0300
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443		0x0301
#define CMD_READ_SRI512_TAG											0x0303
#define CMD_READ_SRIX4K_TAG											0x0304
#define CMD_READER_ISO_15693										0x0310
#define CMD_SIMTAG_ISO_15693										0x0311
#define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693		0x0312
#define CMD_ISO_15693_COMMAND										0x0313
#define CMD_ISO_15693_COMMAND_DONE							0x0314
#define CMD_ISO_15693_FIND_AFI					0x0315
#define CMD_ISO_15693_DEBUG							0x0316
#define CMD_SIMULATE_TAG_HF_LISTEN			0x0380
#define CMD_SIMULATE_TAG_ISO_14443			0x0381
#define CMD_SNOOP_ISO_14443							0x0382
#define CMD_SNOOP_ISO_14443a						0x0383
#define CMD_SIMULATE_TAG_ISO_14443a			0x0384
#define CMD_READER_ISO_14443a						0x0385
#define CMD_SIMULATE_TAG_LEGIC_RF				0x0387
#define CMD_READER_LEGIC_RF							0x0388
#define CMD_WRITER_LEGIC_RF							0x0399

#define CMD_SNOOP_ICLASS								0x0392
#define CMD_SIMULATE_TAG_ICLASS								0x0393
#define CMD_READER_ICLASS								0x0394

// For measurements of the antenna tuning
#define CMD_MEASURE_ANTENNA_TUNING			0x0400
#define CMD_MEASURE_ANTENNA_TUNING_HF		0x0401
#define CMD_MEASURED_ANTENNA_TUNING			0x0410
#define CMD_LISTEN_READER_FIELD					0x0420

// For direct FPGA control
#define CMD_FPGA_MAJOR_MODE_OFF					0x0500

// For mifare commands
#define CMD_MIFARE_SET_DBGMODE					0x0600
#define CMD_MIFARE_EML_MEMCLR						0x0601
#define CMD_MIFARE_EML_MEMSET						0x0602
#define CMD_MIFARE_EML_MEMGET						0x0603
#define CMD_MIFARE_EML_CARDLOAD					0x0604
#define CMD_MIFARE_EML_CSETBLOCK				0x0605
#define CMD_MIFARE_EML_CGETBLOCK				0x0606

#define CMD_SIMULATE_MIFARE_CARD				0x0610

#define CMD_READER_MIFARE								0x0611
#define CMD_MIFARE_NESTED								0x0612

#define CMD_MIFARE_READBL								0x0620
#define CMD_MIFARE_READSC								0x0621
#define CMD_MIFARE_WRITEBL							0x0622
#define CMD_MIFARE_CHKKEYS							0x0623

#define CMD_MIFARE_SNIFFER							0x0630

#define CMD_UNKNOWN											0xFFFF

// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
/* Whether a bootloader that understands the common_area is present */
#define DEVICE_INFO_FLAG_BOOTROM_PRESENT         	(1<<0)

/* Whether a osimage that understands the common_area is present */
#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT         	(1<<1)

/* Set if the bootloader is currently executing */
#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM    	(1<<2)

/* Set if the OS is currently executing */
#define DEVICE_INFO_FLAG_CURRENT_MODE_OS         	(1<<3)

/* Set if this device understands the extend start flash command */
#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH 	(1<<4)

/* CMD_START_FLASH may have three arguments: start of area to flash,
   end of area to flash, optional magic.
   The bootrom will not allow to overwrite itself unless this magic
   is given as third parameter */

#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'

#endif