| | 1 | 13/11/2015 Change list from original PCB: |
| | 2 | |
| | 3 | Main problem: more then 800 DRC errors when runing that in Eagle. Check out the following changes to make a more reliable PCB. Those are minor cosmetic changes, but ease your life to avoid short circuit. |
| | 4 | |
| | 5 | 1. Eagle Layout / DRC rules / Masks / Limit: from 0mil to 16mil, thus ordinary GND and signal vias which smaller then 16mil wont be open at solder stop mask layer. |
| | 6 | |
| | 7 | 2. Eagle Layout / DRC rules / Masks / Stop MAX: from 2mil to 0, this way the solder stop mask wont overlap silkscreen drawings. Also as per PCB assembly houses, it's recommended, they set their own scaling for production. |
| | 8 | |
| | 9 | 3. Exporting all the parts in the proxmark3 Eagle Layout into a library for minor silkscreen edition: proxmark3_components merged.lbr |
| | 10 | - Editing components footprint as was overlapping with top stop mask |
| | 11 | |
| | 12 | 4. Adding top, bottom, in1, in2 layer markings in PCB layout for better manufacturing identification |
| | 13 | |
| | 14 | 5. Generating 4 layer CAM files |
projects / proxmark3-svn / blame_incremental