git.zerfleddert.de Git - proxmark3-svn/blame_incremental

... / ...

Commit	Line	Data
	1	`include "lo_read.v"
	2	/*
	3	pck0 - input main 24Mhz clock (PLL / 4)
	4	[7:0] adc_d - input data from A/D converter
	5	lo_is_125khz - input freq selector (1=125Khz, 0=136Khz)
	6
	7	pwr_lo - output to coil drivers (ssp_clk / 8)
	8	adc_clk - output A/D clock signal
	9	ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
	10	ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
	11	ssp_clk - output SSP clock signal 1Mhz/1.09Mhz (pck0 / 2*(11+lo_is_125khz) )
	12
	13	ck_1356meg - input unused
	14	ck_1356megb - input unused
	15	ssp_dout - input unused
	16	cross_hi - input unused
	17	cross_lo - input unused
	18
	19	pwr_hi - output unused, tied low
	20	pwr_oe1 - output unused, undefined
	21	pwr_oe2 - output unused, undefined
	22	pwr_oe3 - output unused, undefined
	23	pwr_oe4 - output unused, undefined
	24	dbg - output alias for adc_clk
	25	*/
	26
	27	module testbed_lo_read;
	28	reg pck0;
	29	reg [7:0] adc_d;
	30	reg lo_is_125khz;
	31	reg [15:0] divisor;
	32
	33	wire pwr_lo;
	34	wire adc_clk;
	35	wire ck_1356meg;
	36	wire ck_1356megb;
	37	wire ssp_frame;
	38	wire ssp_din;
	39	wire ssp_clk;
	40	reg ssp_dout;
	41	wire pwr_hi;
	42	wire pwr_oe1;
	43	wire pwr_oe2;
	44	wire pwr_oe3;
	45	wire pwr_oe4;
	46	wire cross_lo;
	47	wire cross_hi;
	48	wire dbg;
	49
	50	lo_read #(5,10) dut(
	51	.pck0(pck0),
	52	.ck_1356meg(ck_1356meg),
	53	.ck_1356megb(ck_1356megb),
	54	.pwr_lo(pwr_lo),
	55	.pwr_hi(pwr_hi),
	56	.pwr_oe1(pwr_oe1),
	57	.pwr_oe2(pwr_oe2),
	58	.pwr_oe3(pwr_oe3),
	59	.pwr_oe4(pwr_oe4),
	60	.adc_d(adc_d),
	61	.adc_clk(adc_clk),
	62	.ssp_frame(ssp_frame),
	63	.ssp_din(ssp_din),
	64	.ssp_dout(ssp_dout),
	65	.ssp_clk(ssp_clk),
	66	.cross_hi(cross_hi),
	67	.cross_lo(cross_lo),
	68	.dbg(dbg),
	69	.lo_is_125khz(lo_is_125khz),
	70	.divisor(divisor)
	71	);
	72
	73	integer idx, i, adc_val=8;
	74
	75	// main clock
	76	always #5 pck0 = !pck0;
	77
	78	task crank_dut;
	79	begin
	80	@(posedge adc_clk) ;
	81	adc_d = adc_val;
	82	adc_val = (adc_val *2) + 53;
	83	end
	84	endtask
	85
	86	initial begin
	87
	88	// init inputs
	89	pck0 = 0;
	90	adc_d = 0;
	91	ssp_dout = 0;
	92	lo_is_125khz = 1;
	93	divisor = 255; //min 16, 95=125Khz, max 255
	94
	95	// simulate 4 A/D cycles at 125Khz
	96	for (i = 0 ; i < 8 ; i = i + 1) begin
	97	crank_dut;
	98	end
	99	$finish;
	100	end
	101	endmodule // main