| | 1 | --[[ |
| | 2 | These are command definitions. This file should correspond exactly to usb_cmd.h. |
| | 3 | --]] |
| | 4 | --// For the bootloader |
| | 5 | local _commands = { |
| | 6 | CMD_DEVICE_INFO = 0x0000, |
| | 7 | CMD_SETUP_WRITE = 0x0001, |
| | 8 | CMD_FINISH_WRITE = 0x0003, |
| | 9 | CMD_HARDWARE_RESET = 0x0004, |
| | 10 | CMD_START_FLASH = 0x0005, |
| | 11 | CMD_NACK = 0x00fe, |
| | 12 | CMD_ACK = 0x00ff, |
| | 13 | |
| | 14 | --// For general mucking around |
| | 15 | CMD_DEBUG_PRINT_STRING = 0x0100, |
| | 16 | CMD_DEBUG_PRINT_INTEGERS = 0x0101, |
| | 17 | CMD_DEBUG_PRINT_BYTES = 0x0102, |
| | 18 | CMD_LCD_RESET = 0x0103, |
| | 19 | CMD_LCD = 0x0104, |
| | 20 | CMD_BUFF_CLEAR = 0x0105, |
| | 21 | CMD_READ_MEM = 0x0106, |
| | 22 | CMD_VERSION = 0x0107, |
| | 23 | |
| | 24 | --// For low-frequency tags |
| | 25 | CMD_READ_TI_TYPE = 0x0202, |
| | 26 | CMD_WRITE_TI_TYPE = 0x0203, |
| | 27 | CMD_DOWNLOADED_RAW_BITS_TI_TYPE = 0x0204, |
| | 28 | CMD_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0205, |
| | 29 | CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0206, |
| | 30 | CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K = 0x0207, |
| | 31 | CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K = 0x0208, |
| | 32 | CMD_DOWNLOADED_SIM_SAMPLES_125K = 0x0209, |
| | 33 | CMD_SIMULATE_TAG_125K = 0x020A, |
| | 34 | CMD_HID_DEMOD_FSK = 0x020B, |
| | 35 | CMD_HID_SIM_TAG = 0x020C, |
| | 36 | CMD_SET_LF_DIVISOR = 0x020D, |
| | 37 | CMD_LF_SIMULATE_BIDIR = 0x020E, |
| | 38 | CMD_SET_ADC_MUX = 0x020F, |
| | 39 | CMD_HID_CLONE_TAG = 0x0210, |
| | 40 | CMD_EM410X_WRITE_TAG = 0x0211, |
| | 41 | CMD_INDALA_CLONE_TAG = 0x0212, |
| | 42 | --// for 224 bits UID |
| | 43 | CMD_INDALA_CLONE_TAG_L = 0x0213, |
| | 44 | CMD_T55XX_READ_BLOCK = 0x0214, |
| | 45 | CMD_T55XX_WRITE_BLOCK = 0x0215, |
| | 46 | CMD_T55XX_READ_TRACE = 0x0216, |
| | 47 | CMD_PCF7931_READ = 0x0217, |
| | 48 | CMD_EM4X_READ_WORD = 0x0218, |
| | 49 | CMD_EM4X_WRITE_WORD = 0x0219, |
| | 50 | --/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */ |
| | 51 | |
| | 52 | --// For the 13.56 MHz tags |
| | 53 | CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 = 0x0300, |
| | 54 | CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 = 0x0301, |
| | 55 | CMD_READ_SRI512_TAG = 0x0303, |
| | 56 | CMD_READ_SRIX4K_TAG = 0x0304, |
| | 57 | CMD_READER_ISO_15693 = 0x0310, |
| | 58 | CMD_SIMTAG_ISO_15693 = 0x0311, |
| | 59 | CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 = 0x0312, |
| | 60 | CMD_ISO_15693_COMMAND = 0x0313, |
| | 61 | CMD_ISO_15693_COMMAND_DONE = 0x0314, |
| | 62 | CMD_ISO_15693_FIND_AFI = 0x0315, |
| | 63 | CMD_ISO_15693_DEBUG = 0x0316, |
| | 64 | |
| | 65 | --// For Hitag2 transponders |
| | 66 | CMD_SNOOP_HITAG = 0x0370, |
| | 67 | CMD_SIMULATE_HITAG = 0x0371, |
| | 68 | CMD_READER_HITAG = 0x0372, |
| | 69 | |
| | 70 | CMD_SIMULATE_TAG_HF_LISTEN = 0x0380, |
| | 71 | CMD_SIMULATE_TAG_ISO_14443 = 0x0381, |
| | 72 | CMD_SNOOP_ISO_14443 = 0x0382, |
| | 73 | CMD_SNOOP_ISO_14443a = 0x0383, |
| | 74 | CMD_SIMULATE_TAG_ISO_14443a = 0x0384, |
| | 75 | CMD_READER_ISO_14443a = 0x0385, |
| | 76 | CMD_SIMULATE_TAG_LEGIC_RF = 0x0387, |
| | 77 | CMD_READER_LEGIC_RF = 0x0388, |
| | 78 | CMD_WRITER_LEGIC_RF = 0x0389, |
| | 79 | CMD_EPA_PACE_COLLECT_NONCE = 0x038A, |
| | 80 | |
| | 81 | CMD_SNOOP_ICLASS = 0x0392, |
| | 82 | CMD_SIMULATE_TAG_ICLASS = 0x0393, |
| | 83 | CMD_READER_ICLASS = 0x0394, |
| | 84 | |
| | 85 | --// For measurements of the antenna tuning |
| | 86 | CMD_MEASURE_ANTENNA_TUNING = 0x0400, |
| | 87 | CMD_MEASURE_ANTENNA_TUNING_HF = 0x0401, |
| | 88 | CMD_MEASURED_ANTENNA_TUNING = 0x0410, |
| | 89 | CMD_LISTEN_READER_FIELD = 0x0420, |
| | 90 | |
| | 91 | --// For direct FPGA control |
| | 92 | CMD_FPGA_MAJOR_MODE_OFF = 0x0500, |
| | 93 | |
| | 94 | --// For mifare commands |
| | 95 | CMD_MIFARE_SET_DBGMODE = 0x0600, |
| | 96 | CMD_MIFARE_EML_MEMCLR = 0x0601, |
| | 97 | CMD_MIFARE_EML_MEMSET = 0x0602, |
| | 98 | CMD_MIFARE_EML_MEMGET = 0x0603, |
| | 99 | CMD_MIFARE_EML_CARDLOAD = 0x0604, |
| | 100 | CMD_MIFARE_EML_CSETBLOCK = 0x0605, |
| | 101 | CMD_MIFARE_EML_CGETBLOCK = 0x0606, |
| | 102 | |
| | 103 | CMD_SIMULATE_MIFARE_CARD = 0x0610, |
| | 104 | |
| | 105 | CMD_READER_MIFARE = 0x0611, |
| | 106 | CMD_MIFARE_NESTED = 0x0612, |
| | 107 | |
| | 108 | CMD_MIFARE_READBL = 0x0620, |
| | 109 | CMD_MIFARE_READSC = 0x0621, |
| | 110 | CMD_MIFARE_WRITEBL = 0x0622, |
| | 111 | CMD_MIFARE_CHKKEYS = 0x0623, |
| | 112 | |
| | 113 | CMD_MIFARE_SNIFFER = 0x0630, |
| | 114 | |
| | 115 | CMD_UNKNOWN = 0xFFFF, |
| | 116 | } |
| | 117 | |
| | 118 | |
| | 119 | local _reverse_lookup,k,v = {} |
| | 120 | for k, v in pairs(_commands) do |
| | 121 | _reverse_lookup[v] = k |
| | 122 | end |
| | 123 | _commands.tostring = function(command) |
| | 124 | if(type(command) == 'number') then |
| | 125 | return ("%s (%d)"):format(_reverse_lookup[command]or "ERROR UNDEFINED!", command) |
| | 126 | end |
| | 127 | return ("Error, numeric argument expected, got : %s"):format(tostring(command)) |
| | 128 | end |
| | 129 | |
| | 130 | Command = { |
| | 131 | |
| | 132 | new = function(self, o) |
| | 133 | |
| | 134 | local o = o or {} -- create object if user does not provide one |
| | 135 | setmetatable(o, self) -- DIY inheritance a'la javascript |
| | 136 | self.__index = self |
| | 137 | |
| | 138 | o.cmd = o.cmd or _commands.CMD_UNKNOWN |
| | 139 | --o.arg1 = "test" |
| | 140 | o.arg1 = o.arg1 or 0 |
| | 141 | o.arg2 = o.arg2 or 0 |
| | 142 | o.arg3 = o.arg3 or 0 |
| | 143 | local data = o.data or "0" |
| | 144 | |
| | 145 | if(type(data) == 'string') then |
| | 146 | -- We need to check if it is correct length, otherwise pad it |
| | 147 | local len = string.len(data) |
| | 148 | if(len < 1024) then |
| | 149 | --Should be 1024 hex characters to represent 512 bytes of data |
| | 150 | data = data .. string.rep("0",1024 - len ) |
| | 151 | end |
| | 152 | if(len > 1024) then |
| | 153 | -- OOps, a bit too much data here |
| | 154 | print( ( "WARNING: data size too large, was %s chars, will be truncated "):format(len) ) |
| | 155 | -- |
| | 156 | data = data:sub(1,1024) |
| | 157 | end |
| | 158 | else |
| | 159 | print(("WARNING; data was NOT a (hex-) string, but was %s"):format(type(data))) |
| | 160 | end |
| | 161 | o.data = data |
| | 162 | |
| | 163 | return o |
| | 164 | end, |
| | 165 | } |
| | 166 | function Command:__tostring() |
| | 167 | local output = ("%s\r\nargs : (%s, %s, %s)\r\ndata:\r\n%s\r\n"):format( |
| | 168 | _commands.tostring(self.cmd), |
| | 169 | tostring(self.arg1), |
| | 170 | tostring(self.arg2), |
| | 171 | tostring(self.arg3), |
| | 172 | tostring(self.data)) |
| | 173 | return output |
| | 174 | end |
| | 175 | function Command:getBytes() |
| | 176 | --If a hex-string has been used |
| | 177 | local data = self.data |
| | 178 | local cmd = self.cmd |
| | 179 | local arg1, arg2, arg3 = self.arg1, self.arg2, self.arg3 |
| | 180 | |
| | 181 | |
| | 182 | return bin.pack("LLLLH",cmd, arg1, arg2, arg3,data); |
| | 183 | end |
| | 184 | |
| | 185 | |
| | 186 | return _commands |
projects / proxmark3-svn / blame_incremental