]> git.zerfleddert.de Git - proxmark3-svn/blame_incremental - include/usb_cmd.h
FPGA changes (#803)
[proxmark3-svn] / include / usb_cmd.h
... / ...
CommitLineData
1//-----------------------------------------------------------------------------
2// Jonathan Westhues, Mar 2006
3// Edits by Gerhard de Koning Gans, Sep 2007
4//
5// This code is licensed to you under the terms of the GNU GPL, version 2 or,
6// at your option, any later version. See the LICENSE.txt file for the text of
7// the license.
8//-----------------------------------------------------------------------------
9// Definitions for all the types of commands that may be sent over USB; our
10// own protocol.
11//-----------------------------------------------------------------------------
12
13#ifndef __USB_CMD_H
14#define __USB_CMD_H
15#ifdef _MSC_VER
16typedef DWORD uint32_t;
17typedef BYTE uint8_t;
18#define PACKED
19// stuff
20#else
21#include <stdint.h>
22#include <stdbool.h>
23#define PACKED __attribute__((packed))
24#endif
25
26#define USB_CMD_DATA_SIZE 512
27
28typedef struct {
29 uint64_t cmd;
30 uint64_t arg[3];
31 union {
32 uint8_t asBytes[USB_CMD_DATA_SIZE];
33 uint32_t asDwords[USB_CMD_DATA_SIZE/4];
34 } d;
35} PACKED UsbCommand;
36
37// A struct used to send sample-configs over USB
38typedef struct{
39 uint8_t decimation;
40 uint8_t bits_per_sample;
41 bool averaging;
42 int divisor;
43 int trigger_threshold;
44} sample_config;
45
46// For the bootloader
47#define CMD_DEVICE_INFO 0x0000
48#define CMD_SETUP_WRITE 0x0001
49#define CMD_FINISH_WRITE 0x0003
50#define CMD_HARDWARE_RESET 0x0004
51#define CMD_START_FLASH 0x0005
52#define CMD_NACK 0x00fe
53#define CMD_ACK 0x00ff
54
55// For general mucking around
56#define CMD_DEBUG_PRINT_STRING 0x0100
57#define CMD_DEBUG_PRINT_INTEGERS 0x0101
58#define CMD_DEBUG_PRINT_BYTES 0x0102
59#define CMD_LCD_RESET 0x0103
60#define CMD_LCD 0x0104
61#define CMD_BUFF_CLEAR 0x0105
62#define CMD_READ_MEM 0x0106
63#define CMD_VERSION 0x0107
64#define CMD_STATUS 0x0108
65#define CMD_PING 0x0109
66
67// controlling the ADC input multiplexer
68#define CMD_SET_ADC_MUX 0x020F
69
70// RDV40, Smart card operations
71#define CMD_SMART_RAW 0x0140
72#define CMD_SMART_UPGRADE 0x0141
73#define CMD_SMART_UPLOAD 0x0142
74#define CMD_SMART_ATR 0x0143
75// CMD_SMART_SETBAUD is unused for now
76#define CMD_SMART_SETBAUD 0x0144
77#define CMD_SMART_SETCLOCK 0x0145
78
79// For low-frequency tags
80#define CMD_READ_TI_TYPE 0x0202
81#define CMD_WRITE_TI_TYPE 0x0203
82#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
83#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
84#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
85#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
86#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
87#define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
88#define CMD_SIMULATE_TAG_125K 0x020A
89#define CMD_HID_DEMOD_FSK 0x020B
90#define CMD_HID_SIM_TAG 0x020C
91#define CMD_SET_LF_DIVISOR 0x020D
92#define CMD_LF_SIMULATE_BIDIR 0x020E
93#define CMD_HID_CLONE_TAG 0x0210
94#define CMD_EM410X_WRITE_TAG 0x0211
95#define CMD_INDALA_CLONE_TAG 0x0212
96// for 224 bits UID
97#define CMD_INDALA_CLONE_TAG_L 0x0213
98#define CMD_T55XX_READ_BLOCK 0x0214
99#define CMD_T55XX_WRITE_BLOCK 0x0215
100#define CMD_T55XX_RESET_READ 0x0216
101#define CMD_PCF7931_READ 0x0217
102#define CMD_PCF7931_WRITE 0x0222
103#define CMD_PCF7931_BRUTEFORCE 0x0227
104#define CMD_EM4X_READ_WORD 0x0218
105#define CMD_EM4X_WRITE_WORD 0x0219
106#define CMD_IO_DEMOD_FSK 0x021A
107#define CMD_IO_CLONE_TAG 0x021B
108#define CMD_EM410X_DEMOD 0x021c
109// Sampling configuration for LF reader/snooper
110#define CMD_SET_LF_SAMPLING_CONFIG 0x021d
111#define CMD_FSK_SIM_TAG 0x021E
112#define CMD_ASK_SIM_TAG 0x021F
113#define CMD_PSK_SIM_TAG 0x0220
114#define CMD_AWID_DEMOD_FSK 0x0221
115#define CMD_VIKING_CLONE_TAG 0x0223
116#define CMD_T55XX_WAKEUP 0x0224
117#define CMD_COTAG 0x0225
118#define CMD_PARADOX_CLONE_TAG 0x0226
119
120// For the 13.56 MHz tags
121#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
122#define CMD_READ_SRI512_TAG 0x0303
123#define CMD_READ_SRIX4K_TAG 0x0304
124#define CMD_ISO_14443B_COMMAND 0x0305
125#define CMD_READER_ISO_15693 0x0310
126#define CMD_SIMTAG_ISO_15693 0x0311
127#define CMD_SNOOP_ISO_15693 0x0312
128#define CMD_ISO_15693_COMMAND 0x0313
129#define CMD_ISO_15693_COMMAND_DONE 0x0314
130#define CMD_ISO_15693_FIND_AFI 0x0315
131#define CMD_ISO_15693_DEBUG 0x0316
132#define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
133
134// For Hitag2 transponders
135#define CMD_SNOOP_HITAG 0x0370
136#define CMD_SIMULATE_HITAG 0x0371
137#define CMD_READER_HITAG 0x0372
138#define CMD_SIMULATE_HITAG_S 0x0368
139#define CMD_TEST_HITAGS_TRACES 0x0367
140#define CMD_READ_HITAG_S 0x0373
141#define CMD_READ_HITAG_S_BLK 0x0374
142#define CMD_WR_HITAG_S 0x0375
143#define CMD_EMU_HITAG_S 0x0376
144
145#define CMD_SIMULATE_TAG_ISO_14443B 0x0381
146#define CMD_SNOOP_ISO_14443B 0x0382
147#define CMD_SNOOP_ISO_14443a 0x0383
148#define CMD_SIMULATE_TAG_ISO_14443a 0x0384
149#define CMD_READER_ISO_14443a 0x0385
150#define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
151#define CMD_READER_LEGIC_RF 0x0388
152#define CMD_WRITER_LEGIC_RF 0x0389
153#define CMD_EPA_PACE_COLLECT_NONCE 0x038A
154#define CMD_EPA_PACE_REPLAY 0x038B
155
156#define CMD_ICLASS_READCHECK 0x038F
157#define CMD_ICLASS_CLONE 0x0390
158#define CMD_ICLASS_DUMP 0x0391
159#define CMD_SNOOP_ICLASS 0x0392
160#define CMD_SIMULATE_TAG_ICLASS 0x0393
161#define CMD_READER_ICLASS 0x0394
162#define CMD_READER_ICLASS_REPLAY 0x0395
163#define CMD_ICLASS_READBLOCK 0x0396
164#define CMD_ICLASS_WRITEBLOCK 0x0397
165#define CMD_ICLASS_EML_MEMSET 0x0398
166#define CMD_ICLASS_AUTHENTICATION 0x0399
167
168// For measurements of the antenna tuning
169#define CMD_MEASURE_ANTENNA_TUNING 0x0400
170#define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
171#define CMD_MEASURED_ANTENNA_TUNING 0x0410
172#define CMD_LISTEN_READER_FIELD 0x0420
173
174// For direct FPGA control
175#define CMD_FPGA_MAJOR_MODE_OFF 0x0500
176
177// For mifare commands
178#define CMD_MIFARE_SET_DBGMODE 0x0600
179#define CMD_MIFARE_EML_MEMCLR 0x0601
180#define CMD_MIFARE_EML_MEMSET 0x0602
181#define CMD_MIFARE_EML_MEMGET 0x0603
182#define CMD_MIFARE_EML_CARDLOAD 0x0604
183
184// magic chinese card commands
185#define CMD_MIFARE_CSETBLOCK 0x0605
186#define CMD_MIFARE_CGETBLOCK 0x0606
187#define CMD_MIFARE_CIDENT 0x0607
188#define CMD_MIFARE_CWIPE 0x0608
189
190#define CMD_SIMULATE_MIFARE_CARD 0x0610
191
192#define CMD_READER_MIFARE 0x0611
193#define CMD_MIFARE_NESTED 0x0612
194#define CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES 0x0613
195
196#define CMD_MIFARE_READBL 0x0620
197#define CMD_MIFAREU_READBL 0x0720
198#define CMD_MIFARE_READSC 0x0621
199#define CMD_MIFAREU_READCARD 0x0721
200#define CMD_MIFARE_WRITEBL 0x0622
201#define CMD_MIFAREU_WRITEBL 0x0722
202#define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
203
204#define CMD_MIFARE_CHKKEYS 0x0623
205
206#define CMD_MIFARE_SNIFFER 0x0630
207//ultralightC
208#define CMD_MIFAREUC_AUTH 0x0724
209//0x0725 and 0x0726 no longer used
210#define CMD_MIFAREUC_SETPWD 0x0727
211
212
213// mifare desfire
214#define CMD_MIFARE_DESFIRE_READBL 0x0728
215#define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
216#define CMD_MIFARE_DESFIRE_AUTH1 0x072a
217#define CMD_MIFARE_DESFIRE_AUTH2 0x072b
218#define CMD_MIFARE_DES_READER 0x072c
219#define CMD_MIFARE_DESFIRE_INFO 0x072d
220#define CMD_MIFARE_DESFIRE 0x072e
221
222#define CMD_HF_SNIFFER 0x0800
223#define CMD_HF_PLOT 0x0801
224
225#define CMD_UNKNOWN 0xFFFF
226
227
228//Mifare simulation flags
229#define FLAG_INTERACTIVE 0x01
230#define FLAG_4B_UID_IN_DATA 0x02
231#define FLAG_7B_UID_IN_DATA 0x04
232#define FLAG_10B_UID_IN_DATA 0x08
233#define FLAG_NR_AR_ATTACK 0x10
234#define FLAG_RANDOM_NONCE 0x20
235
236
237//Iclass reader flags
238#define FLAG_ICLASS_READER_ONLY_ONCE 0x01
239#define FLAG_ICLASS_READER_CC 0x02
240#define FLAG_ICLASS_READER_CSN 0x04
241#define FLAG_ICLASS_READER_CONF 0x08
242#define FLAG_ICLASS_READER_AA 0x10
243#define FLAG_ICLASS_READER_ONE_TRY 0x20
244#define FLAG_ICLASS_READER_CEDITKEY 0x40
245
246
247//hw tune args
248#define FLAG_TUNE_LF 1
249#define FLAG_TUNE_HF 2
250#define FLAG_TUNE_ALL 3
251
252// Hardware capabilities
253#define HAS_EXTRA_FLASH_MEM (1 << 0)
254#define HAS_SMARTCARD_SLOT (1 << 1)
255
256
257// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
258/* Whether a bootloader that understands the common_area is present */
259#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
260
261/* Whether a osimage that understands the common_area is present */
262#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
263
264/* Set if the bootloader is currently executing */
265#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
266
267/* Set if the OS is currently executing */
268#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
269
270/* Set if this device understands the extend start flash command */
271#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
272
273/* CMD_START_FLASH may have three arguments: start of area to flash,
274 end of area to flash, optional magic.
275 The bootrom will not allow to overwrite itself unless this magic
276 is given as third parameter */
277
278#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
279
280#endif
Impressum, Datenschutz