| | 1 | # This makefile needs to be edited to reflect the location |
| | 2 | # of your own arm-elf-gcc toolchain (ARMLIB variable) |
| | 3 | |
| | 4 | CC = arm-elf-gcc |
| | 5 | AS = arm-elf-as |
| | 6 | LD = arm-elf-ld |
| | 7 | OBJCOPY = arm-elf-objcopy |
| | 8 | |
| | 9 | # Indicate where your gnuarm toolchain libgcc.a interworking library is located |
| | 10 | # or set $ARMLIB in your environment: |
| | 11 | #ARMLIB = /usr/local/lib/gcc/arm-elf/4.3.3/interwork |
| | 12 | |
| | 13 | |
| | 14 | # Add -DWITH_LCD to EXTRA_CFLAGS if you want support for LCD |
| | 15 | # in your firmware (add OBJLCD to OBJ too!) |
| | 16 | #EXTRA_CFLAGS = -DWITH_LCD |
| | 17 | EXTRA_CFLAGS = |
| | 18 | |
| | 19 | ### You should not need to edit below this line |
| | 20 | |
| | 21 | INCLUDE = -I../include |
| | 22 | INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h apps.h |
| | 23 | CFLAGS_COMMON = -O6 -c $(INCLUDE) -Wall -mthumb-interwork |
| | 24 | CFLAGS = $(CFLAGS_COMMON) $(EXTRA_CFLAGS) -mthumb |
| | 25 | |
| | 26 | |
| | 27 | OBJDIR = obj |
| | 28 | |
| | 29 | OBJLCD = $(OBJDIR)/LCD.o\ |
| | 30 | $(OBJDIR)/fonts.o |
| | 31 | |
| | 32 | OBJ = $(OBJDIR)/start.o \ |
| | 33 | $(OBJDIR)/appmain.o \ |
| | 34 | $(OBJDIR)/fpga.o \ |
| | 35 | $(OBJDIR)/lfops.o \ |
| | 36 | $(OBJDIR)/iso15693.o \ |
| | 37 | $(OBJDIR)/util.o |
| | 38 | |
| | 39 | # To be compiled in ARM mode, not thumb mode: larger but faster |
| | 40 | # Alleviates the 'blew circular buffer' issues somehow... |
| | 41 | OBJFAST = $(OBJDIR)/iso14443.o \ |
| | 42 | $(OBJDIR)/iso14443a.o |
| | 43 | |
| | 44 | OBJFPGA = $(OBJDIR)/fpgaimg.o |
| | 45 | |
| | 46 | OBJCOMMON = $(OBJDIR)/usb.o |
| | 47 | |
| | 48 | all: osimage.s19 fpgaimage.s19 fullimage.s19 |
| | 49 | |
| | 50 | fpgaimage.s19: $(OBJFPGA) |
| | 51 | @echo fpgaimage.s19 |
| | 52 | $(LD) -g -Tldscript-fpga -o $(OBJDIR)/fpgaimage.elf $^ |
| | 53 | $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fpgaimage.elf fpgaimage.s19 |
| | 54 | |
| | 55 | osimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON) |
| | 56 | @echo osimage.s19 |
| | 57 | $(LD) -g -Tldscript -o $(OBJDIR)/osimage.elf -Map=osimage.map $^ $(ARMLIB)/libgcc.a |
| | 58 | $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/osimage.elf osimage.s19 |
| | 59 | |
| | 60 | fullimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON) $(OBJFAST) $(OBJFPGA) |
| | 61 | @echo fullimage.s19 |
| | 62 | $(LD) -g -Tldscript-full -o $(OBJDIR)/fullimage.elf $^ $(ARMLIB)/libgcc.a |
| | 63 | $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fullimage.elf fullimage.s19 |
| | 64 | |
| | 65 | # Directives to put the *.o in the OBJDIR directory: |
| | 66 | $(OBJ): $(OBJDIR)/%.o : %.c |
| | 67 | $(CC) $(CFLAGS) $< -o $@ |
| | 68 | |
| | 69 | $(OBJFPGA): $(OBJDIR)/%.o : %.c |
| | 70 | $(CC) $(CFLAGS) $< -o $@ |
| | 71 | |
| | 72 | $(OBJFAST): $(OBJDIR)/%.o : %.c |
| | 73 | $(CC) $(CFLAGS_COMMON) $< -o $@ |
| | 74 | |
| | 75 | $(OBJCOMMON): $(OBJDIR)/%.o : ../common/%.c |
| | 76 | $(CC) $(CFLAGS) $< -o $@ |
| | 77 | |
| | 78 | flash-both: flash flash-fpga |
| | 79 | |
| | 80 | flash-fpga: fpgaimage.s19 |
| | 81 | ../linux/flasher fpga fpgaimage.s19 |
| | 82 | |
| | 83 | flash: osimage.s19 |
| | 84 | ../linux/flasher os osimage.s19 |
| | 85 | |
| | 86 | # Those do not work on the current firmware ! |
| | 87 | jtag-flash-full: fullimage.s19 |
| | 88 | ../../OpenOCD/openocd -c "halt; flash write_image fullimage.s19 0x00100000; halt; reset; resume; poll; exit" |
| | 89 | |
| | 90 | jtag-flash-fpga: fpgaimage.s19 |
| | 91 | ../../OpenOCD/openocd -c "halt; flash write_image fpgaimage.s19 0x00100000; halt; reset; resume; poll; exit" |
| | 92 | |
| | 93 | jtag-flash: osimage.s19 |
| | 94 | ../../OpenOCD/openocd -c "halt; flash write_image osimage.s19 0x00100000; halt; reset; resume; poll; exit" |
| | 95 | |
| | 96 | clean: |
| | 97 | rm -f $(OBJDIR)/*.o $(OBJDIR)/*.elf *.s19 osimage.map |
| | 98 | |
| | 99 | .PHONY: all clean |
projects / proxmark3-svn / blame_incremental