| 1 | /** |
| 2 | * \file config.h |
| 3 | * |
| 4 | * \brief Configuration options (set of defines) |
| 5 | * |
| 6 | * Copyright (C) 2006-2014, Brainspark B.V. |
| 7 | * |
| 8 | * This file is part of PolarSSL (http://www.polarssl.org) |
| 9 | * Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org> |
| 10 | * |
| 11 | * All rights reserved. |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or modify |
| 14 | * it under the terms of the GNU General Public License as published by |
| 15 | * the Free Software Foundation; either version 2 of the License, or |
| 16 | * (at your option) any later version. |
| 17 | * |
| 18 | * This program is distributed in the hope that it will be useful, |
| 19 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 20 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 21 | * GNU General Public License for more details. |
| 22 | * |
| 23 | * You should have received a copy of the GNU General Public License along |
| 24 | * with this program; if not, write to the Free Software Foundation, Inc., |
| 25 | * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| 26 | * |
| 27 | * This set of compile-time options may be used to enable |
| 28 | * or disable features selectively, and reduce the global |
| 29 | * memory footprint. |
| 30 | */ |
| 31 | #ifndef POLARSSL_CONFIG_H |
| 32 | #define POLARSSL_CONFIG_H |
| 33 | |
| 34 | #if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) |
| 35 | #define _CRT_SECURE_NO_DEPRECATE 1 |
| 36 | #endif |
| 37 | |
| 38 | /** |
| 39 | * \name SECTION: System support |
| 40 | * |
| 41 | * This section sets system specific settings. |
| 42 | * \{ |
| 43 | */ |
| 44 | |
| 45 | /** |
| 46 | * \def POLARSSL_HAVE_INT8 |
| 47 | * |
| 48 | * The system uses 8-bit wide native integers. |
| 49 | * |
| 50 | * Uncomment if native integers are 8-bit wide. |
| 51 | */ |
| 52 | //#define POLARSSL_HAVE_INT8 |
| 53 | |
| 54 | /** |
| 55 | * \def POLARSSL_HAVE_INT16 |
| 56 | * |
| 57 | * The system uses 16-bit wide native integers. |
| 58 | * |
| 59 | * Uncomment if native integers are 16-bit wide. |
| 60 | */ |
| 61 | //#define POLARSSL_HAVE_INT16 |
| 62 | |
| 63 | /** |
| 64 | * \def POLARSSL_HAVE_LONGLONG |
| 65 | * |
| 66 | * The compiler supports the 'long long' type. |
| 67 | * (Only used on 32-bit platforms) |
| 68 | */ |
| 69 | #define POLARSSL_HAVE_LONGLONG |
| 70 | |
| 71 | /** |
| 72 | * \def POLARSSL_HAVE_ASM |
| 73 | * |
| 74 | * The compiler has support for asm(). |
| 75 | * |
| 76 | * Requires support for asm() in compiler. |
| 77 | * |
| 78 | * Used in: |
| 79 | * library/timing.c |
| 80 | * library/padlock.c |
| 81 | * include/polarssl/bn_mul.h |
| 82 | * |
| 83 | * Comment to disable the use of assembly code. |
| 84 | */ |
| 85 | #define POLARSSL_HAVE_ASM |
| 86 | |
| 87 | /** |
| 88 | * \def POLARSSL_HAVE_SSE2 |
| 89 | * |
| 90 | * CPU supports SSE2 instruction set. |
| 91 | * |
| 92 | * Uncomment if the CPU supports SSE2 (IA-32 specific). |
| 93 | */ |
| 94 | //#define POLARSSL_HAVE_SSE2 |
| 95 | |
| 96 | /** |
| 97 | * \def POLARSSL_HAVE_TIME |
| 98 | * |
| 99 | * System has time.h and time() / localtime() / gettimeofday(). |
| 100 | * |
| 101 | * Comment if your system does not support time functions |
| 102 | */ |
| 103 | #define POLARSSL_HAVE_TIME |
| 104 | |
| 105 | /** |
| 106 | * \def POLARSSL_HAVE_IPV6 |
| 107 | * |
| 108 | * System supports the basic socket interface for IPv6 (RFC 3493), |
| 109 | * specifically getaddrinfo(), freeaddrinfo() and struct sockaddr_storage. |
| 110 | * |
| 111 | * Note: on Windows/MingW, XP or higher is required. |
| 112 | * |
| 113 | * Comment if your system does not support the IPv6 socket interface |
| 114 | */ |
| 115 | #define POLARSSL_HAVE_IPV6 |
| 116 | |
| 117 | /** |
| 118 | * \def POLARSSL_PLATFORM_MEMORY |
| 119 | * |
| 120 | * Enable the memory allocation layer. |
| 121 | * |
| 122 | * By default PolarSSL uses the system-provided malloc() and free(). |
| 123 | * This allows different allocators (self-implemented or provided) to be |
| 124 | * provided to the platform abstraction layer. |
| 125 | * |
| 126 | * Enabling POLARSSL_PLATFORM_MEMORY will provide "platform_set_malloc_free()" |
| 127 | * to allow you to set an alternative malloc() and free() function pointer. |
| 128 | * |
| 129 | * Requires: POLARSSL_PLATFORM_C |
| 130 | * |
| 131 | * Enable this layer to allow use of alternative memory allocators. |
| 132 | */ |
| 133 | //#define POLARSSL_PLATFORM_MEMORY |
| 134 | |
| 135 | /** |
| 136 | * \def POLARSSL_PLATFORM_NO_STD_FUNCTIONS |
| 137 | * |
| 138 | * Do not assign standard functions in the platform layer (e.g. malloc() to |
| 139 | * POLARSSL_PLATFORM_STD_MALLOC and printf() to POLARSSL_PLATFORM_STD_PRINTF) |
| 140 | * |
| 141 | * This makes sure there are no linking errors on platforms that do not support |
| 142 | * these functions. You will HAVE to provide alternatives, either at runtime |
| 143 | * via the platform_set_xxx() functions or at compile time by setting |
| 144 | * the POLARSSL_PLATFORM_STD_XXX defines. |
| 145 | * |
| 146 | * Requires: POLARSSL_PLATFORM_C |
| 147 | * |
| 148 | * Uncomment to prevent default assignment of standard functions in the |
| 149 | * platform layer. |
| 150 | */ |
| 151 | //#define POLARSSL_PLATFORM_NO_STD_FUNCTIONS |
| 152 | |
| 153 | /** |
| 154 | * \def POLARSSL_PLATFORM_XXX_ALT |
| 155 | * |
| 156 | * Uncomment a macro to let PolarSSL support the function in the platform |
| 157 | * abstraction layer. |
| 158 | * |
| 159 | * Example: In case you uncomment POLARSSL_PLATFORM_PRINTF_ALT, PolarSSL will |
| 160 | * provide a function "platform_set_printf()" that allows you to set an |
| 161 | * alternative printf function pointer. |
| 162 | * |
| 163 | * All these define require POLARSSL_PLATFORM_C to be defined! |
| 164 | * |
| 165 | * Uncomment a macro to enable alternate implementation of specific base |
| 166 | * platform function |
| 167 | */ |
| 168 | //#define POLARSSL_PLATFORM_PRINTF_ALT |
| 169 | //#define POLARSSL_PLATFORM_FPRINTF_ALT |
| 170 | /* \} name SECTION: System support */ |
| 171 | |
| 172 | /** |
| 173 | * \name SECTION: PolarSSL feature support |
| 174 | * |
| 175 | * This section sets support for features that are or are not needed |
| 176 | * within the modules that are enabled. |
| 177 | * \{ |
| 178 | */ |
| 179 | |
| 180 | /** |
| 181 | * \def POLARSSL_TIMING_ALT |
| 182 | * |
| 183 | * Uncomment to provide your own alternate implementation for hardclock(), |
| 184 | * get_timer(), set_alarm() and m_sleep(). |
| 185 | * |
| 186 | * Only works if you have POLARSSL_TIMING_C enabled. |
| 187 | * |
| 188 | * You will need to provide a header "timing_alt.h" and an implementation at |
| 189 | * compile time. |
| 190 | */ |
| 191 | //#define POLARSSL_TIMING_ALT |
| 192 | |
| 193 | /** |
| 194 | * \def POLARSSL_XXX_ALT |
| 195 | * |
| 196 | * Uncomment a macro to let PolarSSL use your alternate core implementation of |
| 197 | * a symmetric or hash algorithm (e.g. platform specific assembly optimized |
| 198 | * implementations). Keep in mind that the function prototypes should remain |
| 199 | * the same. |
| 200 | * |
| 201 | * Example: In case you uncomment POLARSSL_AES_ALT, PolarSSL will no longer |
| 202 | * provide the "struct aes_context" definition and omit the base function |
| 203 | * declarations and implementations. "aes_alt.h" will be included from |
| 204 | * "aes.h" to include the new function definitions. |
| 205 | * |
| 206 | * Uncomment a macro to enable alternate implementation for core algorithm |
| 207 | * functions |
| 208 | */ |
| 209 | //#define POLARSSL_AES_ALT |
| 210 | //#define POLARSSL_ARC4_ALT |
| 211 | //#define POLARSSL_BLOWFISH_ALT |
| 212 | //#define POLARSSL_CAMELLIA_ALT |
| 213 | //#define POLARSSL_DES_ALT |
| 214 | //#define POLARSSL_XTEA_ALT |
| 215 | //#define POLARSSL_MD2_ALT |
| 216 | //#define POLARSSL_MD4_ALT |
| 217 | //#define POLARSSL_MD5_ALT |
| 218 | //#define POLARSSL_RIPEMD160_ALT |
| 219 | //#define POLARSSL_SHA1_ALT |
| 220 | //#define POLARSSL_SHA256_ALT |
| 221 | //#define POLARSSL_SHA512_ALT |
| 222 | |
| 223 | /** |
| 224 | * \def POLARSSL_AES_ROM_TABLES |
| 225 | * |
| 226 | * Store the AES tables in ROM. |
| 227 | * |
| 228 | * Uncomment this macro to store the AES tables in ROM. |
| 229 | * |
| 230 | */ |
| 231 | //#define POLARSSL_AES_ROM_TABLES |
| 232 | |
| 233 | /** |
| 234 | * \def POLARSSL_CIPHER_MODE_CBC |
| 235 | * |
| 236 | * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. |
| 237 | */ |
| 238 | #define POLARSSL_CIPHER_MODE_CBC |
| 239 | |
| 240 | /** |
| 241 | * \def POLARSSL_CIPHER_MODE_CFB |
| 242 | * |
| 243 | * Enable Cipher Feedback mode (CFB) for symmetric ciphers. |
| 244 | */ |
| 245 | #define POLARSSL_CIPHER_MODE_CFB |
| 246 | |
| 247 | /** |
| 248 | * \def POLARSSL_CIPHER_MODE_CTR |
| 249 | * |
| 250 | * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. |
| 251 | */ |
| 252 | #define POLARSSL_CIPHER_MODE_CTR |
| 253 | |
| 254 | /** |
| 255 | * \def POLARSSL_CIPHER_NULL_CIPHER |
| 256 | * |
| 257 | * Enable NULL cipher. |
| 258 | * Warning: Only do so when you know what you are doing. This allows for |
| 259 | * encryption or channels without any security! |
| 260 | * |
| 261 | * Requires POLARSSL_ENABLE_WEAK_CIPHERSUITES as well to enable |
| 262 | * the following ciphersuites: |
| 263 | * TLS_ECDH_ECDSA_WITH_NULL_SHA |
| 264 | * TLS_ECDH_RSA_WITH_NULL_SHA |
| 265 | * TLS_ECDHE_ECDSA_WITH_NULL_SHA |
| 266 | * TLS_ECDHE_RSA_WITH_NULL_SHA |
| 267 | * TLS_ECDHE_PSK_WITH_NULL_SHA384 |
| 268 | * TLS_ECDHE_PSK_WITH_NULL_SHA256 |
| 269 | * TLS_ECDHE_PSK_WITH_NULL_SHA |
| 270 | * TLS_DHE_PSK_WITH_NULL_SHA384 |
| 271 | * TLS_DHE_PSK_WITH_NULL_SHA256 |
| 272 | * TLS_DHE_PSK_WITH_NULL_SHA |
| 273 | * TLS_RSA_WITH_NULL_SHA256 |
| 274 | * TLS_RSA_WITH_NULL_SHA |
| 275 | * TLS_RSA_WITH_NULL_MD5 |
| 276 | * TLS_RSA_PSK_WITH_NULL_SHA384 |
| 277 | * TLS_RSA_PSK_WITH_NULL_SHA256 |
| 278 | * TLS_RSA_PSK_WITH_NULL_SHA |
| 279 | * TLS_PSK_WITH_NULL_SHA384 |
| 280 | * TLS_PSK_WITH_NULL_SHA256 |
| 281 | * TLS_PSK_WITH_NULL_SHA |
| 282 | * |
| 283 | * Uncomment this macro to enable the NULL cipher and ciphersuites |
| 284 | */ |
| 285 | //#define POLARSSL_CIPHER_NULL_CIPHER |
| 286 | |
| 287 | /** |
| 288 | * \def POLARSSL_CIPHER_PADDING_XXX |
| 289 | * |
| 290 | * Uncomment or comment macros to add support for specific padding modes |
| 291 | * in the cipher layer with cipher modes that support padding (e.g. CBC) |
| 292 | * |
| 293 | * If you disable all padding modes, only full blocks can be used with CBC. |
| 294 | * |
| 295 | * Enable padding modes in the cipher layer. |
| 296 | */ |
| 297 | #define POLARSSL_CIPHER_PADDING_PKCS7 |
| 298 | #define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS |
| 299 | #define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN |
| 300 | #define POLARSSL_CIPHER_PADDING_ZEROS |
| 301 | |
| 302 | /** |
| 303 | * \def POLARSSL_ENABLE_WEAK_CIPHERSUITES |
| 304 | * |
| 305 | * Enable weak ciphersuites in SSL / TLS. |
| 306 | * Warning: Only do so when you know what you are doing. This allows for |
| 307 | * channels with virtually no security at all! |
| 308 | * |
| 309 | * This enables the following ciphersuites: |
| 310 | * TLS_RSA_WITH_DES_CBC_SHA |
| 311 | * TLS_DHE_RSA_WITH_DES_CBC_SHA |
| 312 | * |
| 313 | * Uncomment this macro to enable weak ciphersuites |
| 314 | */ |
| 315 | //#define POLARSSL_ENABLE_WEAK_CIPHERSUITES |
| 316 | |
| 317 | /** |
| 318 | * \def POLARSSL_REMOVE_ARC4_CIPHERSUITES |
| 319 | * |
| 320 | * Remove RC4 ciphersuites by default in SSL / TLS. |
| 321 | * This flag removes the ciphersuites based on RC4 from the default list as |
| 322 | * returned by ssl_list_ciphersuites(). However, it is still possible to |
| 323 | * enable (some of) them with ssl_set_ciphersuites() by including them |
| 324 | * explicitly. |
| 325 | * |
| 326 | * Uncomment this macro to remove RC4 ciphersuites by default. |
| 327 | */ |
| 328 | //#define POLARSSL_REMOVE_ARC4_CIPHERSUITES |
| 329 | |
| 330 | /** |
| 331 | * \def POLARSSL_ECP_XXXX_ENABLED |
| 332 | * |
| 333 | * Enables specific curves within the Elliptic Curve module. |
| 334 | * By default all supported curves are enabled. |
| 335 | * |
| 336 | * Comment macros to disable the curve and functions for it |
| 337 | */ |
| 338 | #define POLARSSL_ECP_DP_SECP192R1_ENABLED |
| 339 | #define POLARSSL_ECP_DP_SECP224R1_ENABLED |
| 340 | #define POLARSSL_ECP_DP_SECP256R1_ENABLED |
| 341 | #define POLARSSL_ECP_DP_SECP384R1_ENABLED |
| 342 | #define POLARSSL_ECP_DP_SECP521R1_ENABLED |
| 343 | #define POLARSSL_ECP_DP_SECP192K1_ENABLED |
| 344 | #define POLARSSL_ECP_DP_SECP224K1_ENABLED |
| 345 | #define POLARSSL_ECP_DP_SECP256K1_ENABLED |
| 346 | #define POLARSSL_ECP_DP_BP256R1_ENABLED |
| 347 | #define POLARSSL_ECP_DP_BP384R1_ENABLED |
| 348 | #define POLARSSL_ECP_DP_BP512R1_ENABLED |
| 349 | //#define POLARSSL_ECP_DP_M221_ENABLED // Not implemented yet! |
| 350 | #define POLARSSL_ECP_DP_M255_ENABLED |
| 351 | //#define POLARSSL_ECP_DP_M383_ENABLED // Not implemented yet! |
| 352 | //#define POLARSSL_ECP_DP_M511_ENABLED // Not implemented yet! |
| 353 | |
| 354 | /** |
| 355 | * \def POLARSSL_ECP_NIST_OPTIM |
| 356 | * |
| 357 | * Enable specific 'modulo p' routines for each NIST prime. |
| 358 | * Depending on the prime and architecture, makes operations 4 to 8 times |
| 359 | * faster on the corresponding curve. |
| 360 | * |
| 361 | * Comment this macro to disable NIST curves optimisation. |
| 362 | */ |
| 363 | #define POLARSSL_ECP_NIST_OPTIM |
| 364 | |
| 365 | /** |
| 366 | * \def POLARSSL_ECDSA_DETERMINISTIC |
| 367 | * |
| 368 | * Enable deterministic ECDSA (RFC 6979). |
| 369 | * Standard ECDSA is "fragile" in the sense that lack of entropy when signing |
| 370 | * may result in a compromise of the long-term signing key. This is avoided by |
| 371 | * the deterministic variant. |
| 372 | * |
| 373 | * Requires: POLARSSL_HMAC_DRBG_C |
| 374 | * |
| 375 | * Comment this macro to disable deterministic ECDSA. |
| 376 | */ |
| 377 | #define POLARSSL_ECDSA_DETERMINISTIC |
| 378 | |
| 379 | /** |
| 380 | * \def POLARSSL_KEY_EXCHANGE_PSK_ENABLED |
| 381 | * |
| 382 | * Enable the PSK based ciphersuite modes in SSL / TLS. |
| 383 | * |
| 384 | * This enables the following ciphersuites (if other requisites are |
| 385 | * enabled as well): |
| 386 | * TLS_PSK_WITH_AES_256_GCM_SHA384 |
| 387 | * TLS_PSK_WITH_AES_256_CBC_SHA384 |
| 388 | * TLS_PSK_WITH_AES_256_CBC_SHA |
| 389 | * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| 390 | * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| 391 | * TLS_PSK_WITH_AES_128_GCM_SHA256 |
| 392 | * TLS_PSK_WITH_AES_128_CBC_SHA256 |
| 393 | * TLS_PSK_WITH_AES_128_CBC_SHA |
| 394 | * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| 395 | * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| 396 | * TLS_PSK_WITH_3DES_EDE_CBC_SHA |
| 397 | * TLS_PSK_WITH_RC4_128_SHA |
| 398 | */ |
| 399 | #define POLARSSL_KEY_EXCHANGE_PSK_ENABLED |
| 400 | |
| 401 | /** |
| 402 | * \def POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED |
| 403 | * |
| 404 | * Enable the DHE-PSK based ciphersuite modes in SSL / TLS. |
| 405 | * |
| 406 | * Requires: POLARSSL_DHM_C |
| 407 | * |
| 408 | * This enables the following ciphersuites (if other requisites are |
| 409 | * enabled as well): |
| 410 | * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 |
| 411 | * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 |
| 412 | * TLS_DHE_PSK_WITH_AES_256_CBC_SHA |
| 413 | * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| 414 | * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| 415 | * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 |
| 416 | * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 |
| 417 | * TLS_DHE_PSK_WITH_AES_128_CBC_SHA |
| 418 | * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| 419 | * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| 420 | * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA |
| 421 | * TLS_DHE_PSK_WITH_RC4_128_SHA |
| 422 | */ |
| 423 | #define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED |
| 424 | |
| 425 | /** |
| 426 | * \def POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED |
| 427 | * |
| 428 | * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. |
| 429 | * |
| 430 | * Requires: POLARSSL_ECDH_C |
| 431 | * |
| 432 | * This enables the following ciphersuites (if other requisites are |
| 433 | * enabled as well): |
| 434 | * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 |
| 435 | * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA |
| 436 | * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| 437 | * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 |
| 438 | * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA |
| 439 | * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| 440 | * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA |
| 441 | * TLS_ECDHE_PSK_WITH_RC4_128_SHA |
| 442 | */ |
| 443 | #define POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED |
| 444 | |
| 445 | /** |
| 446 | * \def POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED |
| 447 | * |
| 448 | * Enable the RSA-PSK based ciphersuite modes in SSL / TLS. |
| 449 | * |
| 450 | * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15, |
| 451 | * POLARSSL_X509_CRT_PARSE_C |
| 452 | * |
| 453 | * This enables the following ciphersuites (if other requisites are |
| 454 | * enabled as well): |
| 455 | * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 |
| 456 | * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 |
| 457 | * TLS_RSA_PSK_WITH_AES_256_CBC_SHA |
| 458 | * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| 459 | * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| 460 | * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 |
| 461 | * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 |
| 462 | * TLS_RSA_PSK_WITH_AES_128_CBC_SHA |
| 463 | * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| 464 | * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| 465 | * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA |
| 466 | * TLS_RSA_PSK_WITH_RC4_128_SHA |
| 467 | */ |
| 468 | #define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED |
| 469 | |
| 470 | /** |
| 471 | * \def POLARSSL_KEY_EXCHANGE_RSA_ENABLED |
| 472 | * |
| 473 | * Enable the RSA-only based ciphersuite modes in SSL / TLS. |
| 474 | * |
| 475 | * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15, |
| 476 | * POLARSSL_X509_CRT_PARSE_C |
| 477 | * |
| 478 | * This enables the following ciphersuites (if other requisites are |
| 479 | * enabled as well): |
| 480 | * TLS_RSA_WITH_AES_256_GCM_SHA384 |
| 481 | * TLS_RSA_WITH_AES_256_CBC_SHA256 |
| 482 | * TLS_RSA_WITH_AES_256_CBC_SHA |
| 483 | * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 484 | * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| 485 | * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA |
| 486 | * TLS_RSA_WITH_AES_128_GCM_SHA256 |
| 487 | * TLS_RSA_WITH_AES_128_CBC_SHA256 |
| 488 | * TLS_RSA_WITH_AES_128_CBC_SHA |
| 489 | * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 490 | * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 491 | * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA |
| 492 | * TLS_RSA_WITH_3DES_EDE_CBC_SHA |
| 493 | * TLS_RSA_WITH_RC4_128_SHA |
| 494 | * TLS_RSA_WITH_RC4_128_MD5 |
| 495 | */ |
| 496 | #define POLARSSL_KEY_EXCHANGE_RSA_ENABLED |
| 497 | |
| 498 | /** |
| 499 | * \def POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED |
| 500 | * |
| 501 | * Enable the DHE-RSA based ciphersuite modes in SSL / TLS. |
| 502 | * |
| 503 | * Requires: POLARSSL_DHM_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15, |
| 504 | * POLARSSL_X509_CRT_PARSE_C |
| 505 | * |
| 506 | * This enables the following ciphersuites (if other requisites are |
| 507 | * enabled as well): |
| 508 | * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 |
| 509 | * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 |
| 510 | * TLS_DHE_RSA_WITH_AES_256_CBC_SHA |
| 511 | * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 512 | * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| 513 | * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA |
| 514 | * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 |
| 515 | * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 |
| 516 | * TLS_DHE_RSA_WITH_AES_128_CBC_SHA |
| 517 | * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 518 | * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 519 | * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA |
| 520 | * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA |
| 521 | */ |
| 522 | #define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED |
| 523 | |
| 524 | /** |
| 525 | * \def POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED |
| 526 | * |
| 527 | * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. |
| 528 | * |
| 529 | * Requires: POLARSSL_ECDH_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15, |
| 530 | * POLARSSL_X509_CRT_PARSE_C |
| 531 | * |
| 532 | * This enables the following ciphersuites (if other requisites are |
| 533 | * enabled as well): |
| 534 | * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 |
| 535 | * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 |
| 536 | * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA |
| 537 | * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 538 | * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| 539 | * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 |
| 540 | * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 |
| 541 | * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA |
| 542 | * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 543 | * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 544 | * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA |
| 545 | * TLS_ECDHE_RSA_WITH_RC4_128_SHA |
| 546 | */ |
| 547 | #define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED |
| 548 | |
| 549 | /** |
| 550 | * \def POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED |
| 551 | * |
| 552 | * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. |
| 553 | * |
| 554 | * Requires: POLARSSL_ECDH_C, POLARSSL_ECDSA_C, POLARSSL_X509_CRT_PARSE_C, |
| 555 | * |
| 556 | * This enables the following ciphersuites (if other requisites are |
| 557 | * enabled as well): |
| 558 | * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 |
| 559 | * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 |
| 560 | * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA |
| 561 | * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 562 | * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| 563 | * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| 564 | * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 |
| 565 | * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA |
| 566 | * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 567 | * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 568 | * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA |
| 569 | * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA |
| 570 | */ |
| 571 | #define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED |
| 572 | |
| 573 | /** |
| 574 | * \def POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED |
| 575 | * |
| 576 | * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. |
| 577 | * |
| 578 | * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C |
| 579 | * |
| 580 | * This enables the following ciphersuites (if other requisites are |
| 581 | * enabled as well): |
| 582 | * TLS_ECDH_ECDSA_WITH_RC4_128_SHA |
| 583 | * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA |
| 584 | * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA |
| 585 | * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA |
| 586 | * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 |
| 587 | * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 |
| 588 | * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 |
| 589 | * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 |
| 590 | * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 591 | * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| 592 | * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 593 | * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 594 | */ |
| 595 | #define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED |
| 596 | |
| 597 | /** |
| 598 | * \def POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED |
| 599 | * |
| 600 | * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. |
| 601 | * |
| 602 | * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C |
| 603 | * |
| 604 | * This enables the following ciphersuites (if other requisites are |
| 605 | * enabled as well): |
| 606 | * TLS_ECDH_RSA_WITH_RC4_128_SHA |
| 607 | * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA |
| 608 | * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA |
| 609 | * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA |
| 610 | * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 |
| 611 | * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 |
| 612 | * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 |
| 613 | * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 |
| 614 | * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 615 | * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| 616 | * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 617 | * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 618 | */ |
| 619 | #define POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED |
| 620 | |
| 621 | /** |
| 622 | * \def POLARSSL_PK_PARSE_EC_EXTENDED |
| 623 | * |
| 624 | * Enhance support for reading EC keys using variants of SEC1 not allowed by |
| 625 | * RFC 5915 and RFC 5480. |
| 626 | * |
| 627 | * Currently this means parsing the SpecifiedECDomain choice of EC |
| 628 | * parameters (only known groups are supported, not arbitrary domains, to |
| 629 | * avoid validation issues). |
| 630 | * |
| 631 | * Disable if you only need to support RFC 5915 + 5480 key formats. |
| 632 | */ |
| 633 | #define POLARSSL_PK_PARSE_EC_EXTENDED |
| 634 | |
| 635 | /** |
| 636 | * \def POLARSSL_ERROR_STRERROR_BC |
| 637 | * |
| 638 | * Make available the backward compatible error_strerror() next to the |
| 639 | * current polarssl_strerror(). |
| 640 | * |
| 641 | * For new code, it is recommended to use polarssl_strerror() instead and |
| 642 | * disable this. |
| 643 | * |
| 644 | * Disable if you run into name conflicts and want to really remove the |
| 645 | * error_strerror() |
| 646 | */ |
| 647 | #define POLARSSL_ERROR_STRERROR_BC |
| 648 | |
| 649 | /** |
| 650 | * \def POLARSSL_ERROR_STRERROR_DUMMY |
| 651 | * |
| 652 | * Enable a dummy error function to make use of polarssl_strerror() in |
| 653 | * third party libraries easier when POLARSSL_ERROR_C is disabled |
| 654 | * (no effect when POLARSSL_ERROR_C is enabled). |
| 655 | * |
| 656 | * You can safely disable this if POLARSSL_ERROR_C is enabled, or if you're |
| 657 | * not using polarssl_strerror() or error_strerror() in your application. |
| 658 | * |
| 659 | * Disable if you run into name conflicts and want to really remove the |
| 660 | * polarssl_strerror() |
| 661 | */ |
| 662 | #define POLARSSL_ERROR_STRERROR_DUMMY |
| 663 | |
| 664 | /** |
| 665 | * \def POLARSSL_GENPRIME |
| 666 | * |
| 667 | * Enable the prime-number generation code. |
| 668 | * |
| 669 | * Requires: POLARSSL_BIGNUM_C |
| 670 | */ |
| 671 | #define POLARSSL_GENPRIME |
| 672 | |
| 673 | /** |
| 674 | * \def POLARSSL_FS_IO |
| 675 | * |
| 676 | * Enable functions that use the filesystem. |
| 677 | */ |
| 678 | #define POLARSSL_FS_IO |
| 679 | |
| 680 | /** |
| 681 | * \def POLARSSL_NO_DEFAULT_ENTROPY_SOURCES |
| 682 | * |
| 683 | * Do not add default entropy sources. These are the platform specific, |
| 684 | * hardclock and HAVEGE based poll functions. |
| 685 | * |
| 686 | * This is useful to have more control over the added entropy sources in an |
| 687 | * application. |
| 688 | * |
| 689 | * Uncomment this macro to prevent loading of default entropy functions. |
| 690 | */ |
| 691 | //#define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES |
| 692 | |
| 693 | /** |
| 694 | * \def POLARSSL_NO_PLATFORM_ENTROPY |
| 695 | * |
| 696 | * Do not use built-in platform entropy functions. |
| 697 | * This is useful if your platform does not support |
| 698 | * standards like the /dev/urandom or Windows CryptoAPI. |
| 699 | * |
| 700 | * Uncomment this macro to disable the built-in platform entropy functions. |
| 701 | */ |
| 702 | //#define POLARSSL_NO_PLATFORM_ENTROPY |
| 703 | |
| 704 | /** |
| 705 | * \def POLARSSL_ENTROPY_FORCE_SHA256 |
| 706 | * |
| 707 | * Force the entropy accumulator to use a SHA-256 accumulator instead of the |
| 708 | * default SHA-512 based one (if both are available). |
| 709 | * |
| 710 | * Requires: POLARSSL_SHA256_C |
| 711 | * |
| 712 | * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option |
| 713 | * if you have performance concerns. |
| 714 | * |
| 715 | * This option is only useful if both POLARSSL_SHA256_C and |
| 716 | * POLARSSL_SHA512_C are defined. Otherwise the available hash module is used. |
| 717 | */ |
| 718 | //#define POLARSSL_ENTROPY_FORCE_SHA256 |
| 719 | |
| 720 | /** |
| 721 | * \def POLARSSL_MEMORY_DEBUG |
| 722 | * |
| 723 | * Enable debugging of buffer allocator memory issues. Automatically prints |
| 724 | * (to stderr) all (fatal) messages on memory allocation issues. Enables |
| 725 | * function for 'debug output' of allocated memory. |
| 726 | * |
| 727 | * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C |
| 728 | * |
| 729 | * Uncomment this macro to let the buffer allocator print out error messages. |
| 730 | */ |
| 731 | //#define POLARSSL_MEMORY_DEBUG |
| 732 | |
| 733 | /** |
| 734 | * \def POLARSSL_MEMORY_BACKTRACE |
| 735 | * |
| 736 | * Include backtrace information with each allocated block. |
| 737 | * |
| 738 | * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C |
| 739 | * GLIBC-compatible backtrace() an backtrace_symbols() support |
| 740 | * |
| 741 | * Uncomment this macro to include backtrace information |
| 742 | */ |
| 743 | //#define POLARSSL_MEMORY_BACKTRACE |
| 744 | |
| 745 | /** |
| 746 | * \def POLARSSL_PKCS1_V15 |
| 747 | * |
| 748 | * Enable support for PKCS#1 v1.5 encoding. |
| 749 | * |
| 750 | * Requires: POLARSSL_RSA_C |
| 751 | * |
| 752 | * This enables support for PKCS#1 v1.5 operations. |
| 753 | */ |
| 754 | #define POLARSSL_PKCS1_V15 |
| 755 | |
| 756 | /** |
| 757 | * \def POLARSSL_PKCS1_V21 |
| 758 | * |
| 759 | * Enable support for PKCS#1 v2.1 encoding. |
| 760 | * |
| 761 | * Requires: POLARSSL_MD_C, POLARSSL_RSA_C |
| 762 | * |
| 763 | * This enables support for RSAES-OAEP and RSASSA-PSS operations. |
| 764 | */ |
| 765 | #define POLARSSL_PKCS1_V21 |
| 766 | |
| 767 | /** |
| 768 | * \def POLARSSL_RSA_NO_CRT |
| 769 | * |
| 770 | * Do not use the Chinese Remainder Theorem for the RSA private operation. |
| 771 | * |
| 772 | * Uncomment this macro to disable the use of CRT in RSA. |
| 773 | * |
| 774 | */ |
| 775 | //#define POLARSSL_RSA_NO_CRT |
| 776 | |
| 777 | /** |
| 778 | * \def POLARSSL_SELF_TEST |
| 779 | * |
| 780 | * Enable the checkup functions (*_self_test). |
| 781 | */ |
| 782 | #define POLARSSL_SELF_TEST |
| 783 | |
| 784 | /** |
| 785 | * \def POLARSSL_SSL_ALL_ALERT_MESSAGES |
| 786 | * |
| 787 | * Enable sending of alert messages in case of encountered errors as per RFC. |
| 788 | * If you choose not to send the alert messages, PolarSSL can still communicate |
| 789 | * with other servers, only debugging of failures is harder. |
| 790 | * |
| 791 | * The advantage of not sending alert messages, is that no information is given |
| 792 | * about reasons for failures thus preventing adversaries of gaining intel. |
| 793 | * |
| 794 | * Enable sending of all alert messages |
| 795 | */ |
| 796 | #define POLARSSL_SSL_ALERT_MESSAGES |
| 797 | |
| 798 | /** |
| 799 | * \def POLARSSL_SSL_DEBUG_ALL |
| 800 | * |
| 801 | * Enable the debug messages in SSL module for all issues. |
| 802 | * Debug messages have been disabled in some places to prevent timing |
| 803 | * attacks due to (unbalanced) debugging function calls. |
| 804 | * |
| 805 | * If you need all error reporting you should enable this during debugging, |
| 806 | * but remove this for production servers that should log as well. |
| 807 | * |
| 808 | * Uncomment this macro to report all debug messages on errors introducing |
| 809 | * a timing side-channel. |
| 810 | * |
| 811 | */ |
| 812 | //#define POLARSSL_SSL_DEBUG_ALL |
| 813 | |
| 814 | /** |
| 815 | * \def POLARSSL_SSL_HW_RECORD_ACCEL |
| 816 | * |
| 817 | * Enable hooking functions in SSL module for hardware acceleration of |
| 818 | * individual records. |
| 819 | * |
| 820 | * Uncomment this macro to enable hooking functions. |
| 821 | */ |
| 822 | //#define POLARSSL_SSL_HW_RECORD_ACCEL |
| 823 | |
| 824 | /** |
| 825 | * \def POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO |
| 826 | * |
| 827 | * Enable support for receiving and parsing SSLv2 Client Hello messages for the |
| 828 | * SSL Server module (POLARSSL_SSL_SRV_C). |
| 829 | * |
| 830 | * Comment this macro to disable support for SSLv2 Client Hello messages. |
| 831 | */ |
| 832 | #define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO |
| 833 | |
| 834 | /** |
| 835 | * \def POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE |
| 836 | * |
| 837 | * Pick the ciphersuite according to the client's preferences rather than ours |
| 838 | * in the SSL Server module (POLARSSL_SSL_SRV_C). |
| 839 | * |
| 840 | * Uncomment this macro to respect client's ciphersuite order |
| 841 | */ |
| 842 | //#define POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE |
| 843 | |
| 844 | /** |
| 845 | * \def POLARSSL_SSL_MAX_FRAGMENT_LENGTH |
| 846 | * |
| 847 | * Enable support for RFC 6066 max_fragment_length extension in SSL. |
| 848 | * |
| 849 | * Comment this macro to disable support for the max_fragment_length extension |
| 850 | */ |
| 851 | #define POLARSSL_SSL_MAX_FRAGMENT_LENGTH |
| 852 | |
| 853 | /** |
| 854 | * \def POLARSSL_SSL_PROTO_SSL3 |
| 855 | * |
| 856 | * Enable support for SSL 3.0. |
| 857 | * |
| 858 | * Requires: POLARSSL_MD5_C |
| 859 | * POLARSSL_SHA1_C |
| 860 | * |
| 861 | * Comment this macro to disable support for SSL 3.0 |
| 862 | */ |
| 863 | #define POLARSSL_SSL_PROTO_SSL3 |
| 864 | |
| 865 | /** |
| 866 | * \def POLARSSL_SSL_PROTO_TLS1 |
| 867 | * |
| 868 | * Enable support for TLS 1.0. |
| 869 | * |
| 870 | * Requires: POLARSSL_MD5_C |
| 871 | * POLARSSL_SHA1_C |
| 872 | * |
| 873 | * Comment this macro to disable support for TLS 1.0 |
| 874 | */ |
| 875 | #define POLARSSL_SSL_PROTO_TLS1 |
| 876 | |
| 877 | /** |
| 878 | * \def POLARSSL_SSL_PROTO_TLS1_1 |
| 879 | * |
| 880 | * Enable support for TLS 1.1. |
| 881 | * |
| 882 | * Requires: POLARSSL_MD5_C |
| 883 | * POLARSSL_SHA1_C |
| 884 | * |
| 885 | * Comment this macro to disable support for TLS 1.1 |
| 886 | */ |
| 887 | #define POLARSSL_SSL_PROTO_TLS1_1 |
| 888 | |
| 889 | /** |
| 890 | * \def POLARSSL_SSL_PROTO_TLS1_2 |
| 891 | * |
| 892 | * Enable support for TLS 1.2. |
| 893 | * |
| 894 | * Requires: POLARSSL_SHA1_C or POLARSSL_SHA256_C or POLARSSL_SHA512_C |
| 895 | * (Depends on ciphersuites) |
| 896 | * |
| 897 | * Comment this macro to disable support for TLS 1.2 |
| 898 | */ |
| 899 | #define POLARSSL_SSL_PROTO_TLS1_2 |
| 900 | |
| 901 | /** |
| 902 | * \def POLARSSL_SSL_ALPN |
| 903 | * |
| 904 | * Enable support for Application Layer Protocol Negotiation. |
| 905 | * draft-ietf-tls-applayerprotoneg-05 |
| 906 | * |
| 907 | * Comment this macro to disable support for ALPN. |
| 908 | */ |
| 909 | #define POLARSSL_SSL_ALPN |
| 910 | |
| 911 | /** |
| 912 | * \def POLARSSL_SSL_SESSION_TICKETS |
| 913 | * |
| 914 | * Enable support for RFC 5077 session tickets in SSL. |
| 915 | * |
| 916 | * Requires: POLARSSL_AES_C |
| 917 | * POLARSSL_SHA256_C |
| 918 | * POLARSSL_CIPHER_MODE_CBC |
| 919 | * |
| 920 | * Comment this macro to disable support for SSL session tickets |
| 921 | */ |
| 922 | #define POLARSSL_SSL_SESSION_TICKETS |
| 923 | |
| 924 | /** |
| 925 | * \def POLARSSL_SSL_SERVER_NAME_INDICATION |
| 926 | * |
| 927 | * Enable support for RFC 6066 server name indication (SNI) in SSL. |
| 928 | * |
| 929 | * Comment this macro to disable support for server name indication in SSL |
| 930 | */ |
| 931 | #define POLARSSL_SSL_SERVER_NAME_INDICATION |
| 932 | |
| 933 | /** |
| 934 | * \def POLARSSL_SSL_TRUNCATED_HMAC |
| 935 | * |
| 936 | * Enable support for RFC 6066 truncated HMAC in SSL. |
| 937 | * |
| 938 | * Comment this macro to disable support for truncated HMAC in SSL |
| 939 | */ |
| 940 | #define POLARSSL_SSL_TRUNCATED_HMAC |
| 941 | |
| 942 | /** |
| 943 | * \def POLARSSL_SSL_SET_CURVES |
| 944 | * |
| 945 | * Enable ssl_set_curves(). |
| 946 | * |
| 947 | * This is disabled by default since it breaks binary compatibility with the |
| 948 | * 1.3.x line. If you choose to enable it, you will need to rebuild your |
| 949 | * application against the new header files, relinking will not be enough. |
| 950 | * It will be enabled by default, or no longer an option, in the 1.4 branch. |
| 951 | * |
| 952 | * Uncomment to make ssl_set_curves() available. |
| 953 | */ |
| 954 | //#define POLARSSL_SSL_SET_CURVES |
| 955 | |
| 956 | /** |
| 957 | * \def POLARSSL_THREADING_ALT |
| 958 | * |
| 959 | * Provide your own alternate threading implementation. |
| 960 | * |
| 961 | * Requires: POLARSSL_THREADING_C |
| 962 | * |
| 963 | * Uncomment this to allow your own alternate threading implementation. |
| 964 | */ |
| 965 | //#define POLARSSL_THREADING_ALT |
| 966 | |
| 967 | /** |
| 968 | * \def POLARSSL_THREADING_PTHREAD |
| 969 | * |
| 970 | * Enable the pthread wrapper layer for the threading layer. |
| 971 | * |
| 972 | * Requires: POLARSSL_THREADING_C |
| 973 | * |
| 974 | * Uncomment this to enable pthread mutexes. |
| 975 | */ |
| 976 | //#define POLARSSL_THREADING_PTHREAD |
| 977 | |
| 978 | /** |
| 979 | * \def POLARSSL_VERSION_FEATURES |
| 980 | * |
| 981 | * Allow run-time checking of compile-time enabled features. Thus allowing users |
| 982 | * to check at run-time if the library is for instance compiled with threading |
| 983 | * support via version_check_feature(). |
| 984 | * |
| 985 | * Requires: POLARSSL_VERSION_C |
| 986 | * |
| 987 | * Comment this to disable run-time checking and save ROM space |
| 988 | */ |
| 989 | #define POLARSSL_VERSION_FEATURES |
| 990 | |
| 991 | /** |
| 992 | * \def POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3 |
| 993 | * |
| 994 | * If set, the X509 parser will not break-off when parsing an X509 certificate |
| 995 | * and encountering an extension in a v1 or v2 certificate. |
| 996 | * |
| 997 | * Uncomment to prevent an error. |
| 998 | */ |
| 999 | //#define POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3 |
| 1000 | |
| 1001 | /** |
| 1002 | * \def POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION |
| 1003 | * |
| 1004 | * If set, the X509 parser will not break-off when parsing an X509 certificate |
| 1005 | * and encountering an unknown critical extension. |
| 1006 | * |
| 1007 | * Uncomment to prevent an error. |
| 1008 | */ |
| 1009 | //#define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION |
| 1010 | |
| 1011 | /** |
| 1012 | * \def POLARSSL_X509_CHECK_KEY_USAGE |
| 1013 | * |
| 1014 | * Enable verification of the keyUsage extension (CA and leaf certificates). |
| 1015 | * |
| 1016 | * Disabling this avoids problems with mis-issued and/or misused |
| 1017 | * (intermediate) CA and leaf certificates. |
| 1018 | * |
| 1019 | * \warning Depending on your PKI use, disabling this can be a security risk! |
| 1020 | * |
| 1021 | * Comment to skip keyUsage checking for both CA and leaf certificates. |
| 1022 | */ |
| 1023 | #define POLARSSL_X509_CHECK_KEY_USAGE |
| 1024 | |
| 1025 | /** |
| 1026 | * \def POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE |
| 1027 | * |
| 1028 | * Enable verification of the extendedKeyUsage extension (leaf certificates). |
| 1029 | * |
| 1030 | * Disabling this avoids problems with mis-issued and/or misused certificates. |
| 1031 | * |
| 1032 | * \warning Depending on your PKI use, disabling this can be a security risk! |
| 1033 | * |
| 1034 | * Comment to skip extendedKeyUsage checking for certificates. |
| 1035 | */ |
| 1036 | #define POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE |
| 1037 | |
| 1038 | /** |
| 1039 | * \def POLARSSL_X509_RSASSA_PSS_SUPPORT |
| 1040 | * |
| 1041 | * Enable parsing and verification of X.509 certificates, CRLs and CSRS |
| 1042 | * signed with RSASSA-PSS (aka PKCS#1 v2.1). |
| 1043 | * |
| 1044 | * Comment this macro to disallow using RSASSA-PSS in certificates. |
| 1045 | */ |
| 1046 | #define POLARSSL_X509_RSASSA_PSS_SUPPORT |
| 1047 | |
| 1048 | /** |
| 1049 | * \def POLARSSL_ZLIB_SUPPORT |
| 1050 | * |
| 1051 | * If set, the SSL/TLS module uses ZLIB to support compression and |
| 1052 | * decompression of packet data. |
| 1053 | * |
| 1054 | * \warning TLS-level compression MAY REDUCE SECURITY! See for example the |
| 1055 | * CRIME attack. Before enabling this option, you should examine with care if |
| 1056 | * CRIME or similar exploits may be a applicable to your use case. |
| 1057 | * |
| 1058 | * Used in: library/ssl_tls.c |
| 1059 | * library/ssl_cli.c |
| 1060 | * library/ssl_srv.c |
| 1061 | * |
| 1062 | * This feature requires zlib library and headers to be present. |
| 1063 | * |
| 1064 | * Uncomment to enable use of ZLIB |
| 1065 | */ |
| 1066 | //#define POLARSSL_ZLIB_SUPPORT |
| 1067 | /* \} name SECTION: PolarSSL feature support */ |
| 1068 | |
| 1069 | /** |
| 1070 | * \name SECTION: PolarSSL modules |
| 1071 | * |
| 1072 | * This section enables or disables entire modules in PolarSSL |
| 1073 | * \{ |
| 1074 | */ |
| 1075 | |
| 1076 | /** |
| 1077 | * \def POLARSSL_AESNI_C |
| 1078 | * |
| 1079 | * Enable AES-NI support on x86-64. |
| 1080 | * |
| 1081 | * Module: library/aesni.c |
| 1082 | * Caller: library/aes.c |
| 1083 | * |
| 1084 | * Requires: POLARSSL_HAVE_ASM |
| 1085 | * |
| 1086 | * This modules adds support for the AES-NI instructions on x86-64 |
| 1087 | */ |
| 1088 | //#define POLARSSL_AESNI_C |
| 1089 | |
| 1090 | /** |
| 1091 | * \def POLARSSL_AES_C |
| 1092 | * |
| 1093 | * Enable the AES block cipher. |
| 1094 | * |
| 1095 | * Module: library/aes.c |
| 1096 | * Caller: library/ssl_tls.c |
| 1097 | * library/pem.c |
| 1098 | * library/ctr_drbg.c |
| 1099 | * |
| 1100 | * This module enables the following ciphersuites (if other requisites are |
| 1101 | * enabled as well): |
| 1102 | * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA |
| 1103 | * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA |
| 1104 | * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA |
| 1105 | * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA |
| 1106 | * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 |
| 1107 | * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 |
| 1108 | * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 |
| 1109 | * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 |
| 1110 | * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 |
| 1111 | * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 |
| 1112 | * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 |
| 1113 | * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 |
| 1114 | * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 |
| 1115 | * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 |
| 1116 | * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 |
| 1117 | * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 |
| 1118 | * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 |
| 1119 | * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 |
| 1120 | * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA |
| 1121 | * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA |
| 1122 | * TLS_DHE_RSA_WITH_AES_256_CBC_SHA |
| 1123 | * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| 1124 | * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 |
| 1125 | * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 |
| 1126 | * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 |
| 1127 | * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 |
| 1128 | * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 |
| 1129 | * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA |
| 1130 | * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA |
| 1131 | * TLS_DHE_RSA_WITH_AES_128_CBC_SHA |
| 1132 | * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 |
| 1133 | * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 |
| 1134 | * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 |
| 1135 | * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA |
| 1136 | * TLS_DHE_PSK_WITH_AES_256_CBC_SHA |
| 1137 | * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 |
| 1138 | * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 |
| 1139 | * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 |
| 1140 | * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA |
| 1141 | * TLS_DHE_PSK_WITH_AES_128_CBC_SHA |
| 1142 | * TLS_RSA_WITH_AES_256_GCM_SHA384 |
| 1143 | * TLS_RSA_WITH_AES_256_CBC_SHA256 |
| 1144 | * TLS_RSA_WITH_AES_256_CBC_SHA |
| 1145 | * TLS_RSA_WITH_AES_128_GCM_SHA256 |
| 1146 | * TLS_RSA_WITH_AES_128_CBC_SHA256 |
| 1147 | * TLS_RSA_WITH_AES_128_CBC_SHA |
| 1148 | * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 |
| 1149 | * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 |
| 1150 | * TLS_RSA_PSK_WITH_AES_256_CBC_SHA |
| 1151 | * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 |
| 1152 | * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 |
| 1153 | * TLS_RSA_PSK_WITH_AES_128_CBC_SHA |
| 1154 | * TLS_PSK_WITH_AES_256_GCM_SHA384 |
| 1155 | * TLS_PSK_WITH_AES_256_CBC_SHA384 |
| 1156 | * TLS_PSK_WITH_AES_256_CBC_SHA |
| 1157 | * TLS_PSK_WITH_AES_128_GCM_SHA256 |
| 1158 | * TLS_PSK_WITH_AES_128_CBC_SHA256 |
| 1159 | * TLS_PSK_WITH_AES_128_CBC_SHA |
| 1160 | * |
| 1161 | * PEM_PARSE uses AES for decrypting encrypted keys. |
| 1162 | */ |
| 1163 | #define POLARSSL_AES_C |
| 1164 | |
| 1165 | /** |
| 1166 | * \def POLARSSL_ARC4_C |
| 1167 | * |
| 1168 | * Enable the ARCFOUR stream cipher. |
| 1169 | * |
| 1170 | * Module: library/arc4.c |
| 1171 | * Caller: library/ssl_tls.c |
| 1172 | * |
| 1173 | * This module enables the following ciphersuites (if other requisites are |
| 1174 | * enabled as well): |
| 1175 | * TLS_ECDH_ECDSA_WITH_RC4_128_SHA |
| 1176 | * TLS_ECDH_RSA_WITH_RC4_128_SHA |
| 1177 | * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA |
| 1178 | * TLS_ECDHE_RSA_WITH_RC4_128_SHA |
| 1179 | * TLS_ECDHE_PSK_WITH_RC4_128_SHA |
| 1180 | * TLS_DHE_PSK_WITH_RC4_128_SHA |
| 1181 | * TLS_RSA_WITH_RC4_128_SHA |
| 1182 | * TLS_RSA_WITH_RC4_128_MD5 |
| 1183 | * TLS_RSA_PSK_WITH_RC4_128_SHA |
| 1184 | * TLS_PSK_WITH_RC4_128_SHA |
| 1185 | */ |
| 1186 | #define POLARSSL_ARC4_C |
| 1187 | |
| 1188 | /** |
| 1189 | * \def POLARSSL_ASN1_PARSE_C |
| 1190 | * |
| 1191 | * Enable the generic ASN1 parser. |
| 1192 | * |
| 1193 | * Module: library/asn1.c |
| 1194 | * Caller: library/x509.c |
| 1195 | * library/dhm.c |
| 1196 | * library/pkcs12.c |
| 1197 | * library/pkcs5.c |
| 1198 | * library/pkparse.c |
| 1199 | */ |
| 1200 | #define POLARSSL_ASN1_PARSE_C |
| 1201 | |
| 1202 | /** |
| 1203 | * \def POLARSSL_ASN1_WRITE_C |
| 1204 | * |
| 1205 | * Enable the generic ASN1 writer. |
| 1206 | * |
| 1207 | * Module: library/asn1write.c |
| 1208 | * Caller: library/ecdsa.c |
| 1209 | * library/pkwrite.c |
| 1210 | * library/x509_create.c |
| 1211 | * library/x509write_crt.c |
| 1212 | * library/x509write_csr.c |
| 1213 | */ |
| 1214 | #define POLARSSL_ASN1_WRITE_C |
| 1215 | |
| 1216 | /** |
| 1217 | * \def POLARSSL_BASE64_C |
| 1218 | * |
| 1219 | * Enable the Base64 module. |
| 1220 | * |
| 1221 | * Module: library/base64.c |
| 1222 | * Caller: library/pem.c |
| 1223 | * |
| 1224 | * This module is required for PEM support (required by X.509). |
| 1225 | */ |
| 1226 | #define POLARSSL_BASE64_C |
| 1227 | |
| 1228 | /** |
| 1229 | * \def POLARSSL_BIGNUM_C |
| 1230 | * |
| 1231 | * Enable the multi-precision integer library. |
| 1232 | * |
| 1233 | * Module: library/bignum.c |
| 1234 | * Caller: library/dhm.c |
| 1235 | * library/ecp.c |
| 1236 | * library/ecdsa.c |
| 1237 | * library/rsa.c |
| 1238 | * library/ssl_tls.c |
| 1239 | * |
| 1240 | * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. |
| 1241 | */ |
| 1242 | #define POLARSSL_BIGNUM_C |
| 1243 | |
| 1244 | /** |
| 1245 | * \def POLARSSL_BLOWFISH_C |
| 1246 | * |
| 1247 | * Enable the Blowfish block cipher. |
| 1248 | * |
| 1249 | * Module: library/blowfish.c |
| 1250 | */ |
| 1251 | #define POLARSSL_BLOWFISH_C |
| 1252 | |
| 1253 | /** |
| 1254 | * \def POLARSSL_CAMELLIA_C |
| 1255 | * |
| 1256 | * Enable the Camellia block cipher. |
| 1257 | * |
| 1258 | * Module: library/camellia.c |
| 1259 | * Caller: library/ssl_tls.c |
| 1260 | * |
| 1261 | * This module enables the following ciphersuites (if other requisites are |
| 1262 | * enabled as well): |
| 1263 | * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 1264 | * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| 1265 | * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 1266 | * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| 1267 | * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 1268 | * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 1269 | * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 1270 | * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 1271 | * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 1272 | * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 1273 | * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 1274 | * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| 1275 | * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| 1276 | * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| 1277 | * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA |
| 1278 | * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 1279 | * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 1280 | * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 1281 | * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 1282 | * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 1283 | * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 1284 | * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA |
| 1285 | * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| 1286 | * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| 1287 | * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| 1288 | * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| 1289 | * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| 1290 | * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| 1291 | * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| 1292 | * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| 1293 | * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA |
| 1294 | * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| 1295 | * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| 1296 | * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA |
| 1297 | * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| 1298 | * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| 1299 | * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| 1300 | * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| 1301 | * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| 1302 | * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| 1303 | * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| 1304 | * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| 1305 | */ |
| 1306 | #define POLARSSL_CAMELLIA_C |
| 1307 | |
| 1308 | /** |
| 1309 | * \def POLARSSL_CCM_C |
| 1310 | * |
| 1311 | * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. |
| 1312 | * |
| 1313 | * Module: library/ccm.c |
| 1314 | * |
| 1315 | * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C |
| 1316 | * |
| 1317 | * This module enables the AES-CCM ciphersuites, if other requisites are |
| 1318 | * enabled as well. |
| 1319 | */ |
| 1320 | #define POLARSSL_CCM_C |
| 1321 | |
| 1322 | /** |
| 1323 | * \def POLARSSL_CERTS_C |
| 1324 | * |
| 1325 | * Enable the test certificates. |
| 1326 | * |
| 1327 | * Module: library/certs.c |
| 1328 | * Caller: |
| 1329 | * |
| 1330 | * Requires: POLARSSL_PEM_PARSE_C |
| 1331 | * |
| 1332 | * This module is used for testing (ssl_client/server). |
| 1333 | */ |
| 1334 | #define POLARSSL_CERTS_C |
| 1335 | |
| 1336 | /** |
| 1337 | * \def POLARSSL_CIPHER_C |
| 1338 | * |
| 1339 | * Enable the generic cipher layer. |
| 1340 | * |
| 1341 | * Module: library/cipher.c |
| 1342 | * Caller: library/ssl_tls.c |
| 1343 | * |
| 1344 | * Uncomment to enable generic cipher wrappers. |
| 1345 | */ |
| 1346 | #define POLARSSL_CIPHER_C |
| 1347 | |
| 1348 | /** |
| 1349 | * \def POLARSSL_CTR_DRBG_C |
| 1350 | * |
| 1351 | * Enable the CTR_DRBG AES-256-based random generator. |
| 1352 | * |
| 1353 | * Module: library/ctr_drbg.c |
| 1354 | * Caller: |
| 1355 | * |
| 1356 | * Requires: POLARSSL_AES_C |
| 1357 | * |
| 1358 | * This module provides the CTR_DRBG AES-256 random number generator. |
| 1359 | */ |
| 1360 | #define POLARSSL_CTR_DRBG_C |
| 1361 | |
| 1362 | /** |
| 1363 | * \def POLARSSL_DEBUG_C |
| 1364 | * |
| 1365 | * Enable the debug functions. |
| 1366 | * |
| 1367 | * Module: library/debug.c |
| 1368 | * Caller: library/ssl_cli.c |
| 1369 | * library/ssl_srv.c |
| 1370 | * library/ssl_tls.c |
| 1371 | * |
| 1372 | * This module provides debugging functions. |
| 1373 | */ |
| 1374 | #define POLARSSL_DEBUG_C |
| 1375 | |
| 1376 | /** |
| 1377 | * \def POLARSSL_DES_C |
| 1378 | * |
| 1379 | * Enable the DES block cipher. |
| 1380 | * |
| 1381 | * Module: library/des.c |
| 1382 | * Caller: library/pem.c |
| 1383 | * library/ssl_tls.c |
| 1384 | * |
| 1385 | * This module enables the following ciphersuites (if other requisites are |
| 1386 | * enabled as well): |
| 1387 | * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA |
| 1388 | * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA |
| 1389 | * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA |
| 1390 | * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA |
| 1391 | * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA |
| 1392 | * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA |
| 1393 | * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA |
| 1394 | * TLS_RSA_WITH_3DES_EDE_CBC_SHA |
| 1395 | * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA |
| 1396 | * TLS_PSK_WITH_3DES_EDE_CBC_SHA |
| 1397 | * |
| 1398 | * PEM_PARSE uses DES/3DES for decrypting encrypted keys. |
| 1399 | */ |
| 1400 | #define POLARSSL_DES_C |
| 1401 | |
| 1402 | /** |
| 1403 | * \def POLARSSL_DHM_C |
| 1404 | * |
| 1405 | * Enable the Diffie-Hellman-Merkle module. |
| 1406 | * |
| 1407 | * Module: library/dhm.c |
| 1408 | * Caller: library/ssl_cli.c |
| 1409 | * library/ssl_srv.c |
| 1410 | * |
| 1411 | * This module is used by the following key exchanges: |
| 1412 | * DHE-RSA, DHE-PSK |
| 1413 | */ |
| 1414 | #define POLARSSL_DHM_C |
| 1415 | |
| 1416 | /** |
| 1417 | * \def POLARSSL_ECDH_C |
| 1418 | * |
| 1419 | * Enable the elliptic curve Diffie-Hellman library. |
| 1420 | * |
| 1421 | * Module: library/ecdh.c |
| 1422 | * Caller: library/ssl_cli.c |
| 1423 | * library/ssl_srv.c |
| 1424 | * |
| 1425 | * This module is used by the following key exchanges: |
| 1426 | * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK |
| 1427 | * |
| 1428 | * Requires: POLARSSL_ECP_C |
| 1429 | */ |
| 1430 | #define POLARSSL_ECDH_C |
| 1431 | |
| 1432 | /** |
| 1433 | * \def POLARSSL_ECDSA_C |
| 1434 | * |
| 1435 | * Enable the elliptic curve DSA library. |
| 1436 | * |
| 1437 | * Module: library/ecdsa.c |
| 1438 | * Caller: |
| 1439 | * |
| 1440 | * This module is used by the following key exchanges: |
| 1441 | * ECDHE-ECDSA |
| 1442 | * |
| 1443 | * Requires: POLARSSL_ECP_C, POLARSSL_ASN1_WRITE_C, POLARSSL_ASN1_PARSE_C |
| 1444 | */ |
| 1445 | #define POLARSSL_ECDSA_C |
| 1446 | |
| 1447 | /** |
| 1448 | * \def POLARSSL_ECP_C |
| 1449 | * |
| 1450 | * Enable the elliptic curve over GF(p) library. |
| 1451 | * |
| 1452 | * Module: library/ecp.c |
| 1453 | * Caller: library/ecdh.c |
| 1454 | * library/ecdsa.c |
| 1455 | * |
| 1456 | * Requires: POLARSSL_BIGNUM_C and at least one POLARSSL_ECP_DP_XXX_ENABLED |
| 1457 | */ |
| 1458 | #define POLARSSL_ECP_C |
| 1459 | |
| 1460 | /** |
| 1461 | * \def POLARSSL_ENTROPY_C |
| 1462 | * |
| 1463 | * Enable the platform-specific entropy code. |
| 1464 | * |
| 1465 | * Module: library/entropy.c |
| 1466 | * Caller: |
| 1467 | * |
| 1468 | * Requires: POLARSSL_SHA512_C or POLARSSL_SHA256_C |
| 1469 | * |
| 1470 | * This module provides a generic entropy pool |
| 1471 | */ |
| 1472 | #define POLARSSL_ENTROPY_C |
| 1473 | |
| 1474 | /** |
| 1475 | * \def POLARSSL_ERROR_C |
| 1476 | * |
| 1477 | * Enable error code to error string conversion. |
| 1478 | * |
| 1479 | * Module: library/error.c |
| 1480 | * Caller: |
| 1481 | * |
| 1482 | * This module enables polarssl_strerror(). |
| 1483 | */ |
| 1484 | #define POLARSSL_ERROR_C |
| 1485 | |
| 1486 | /** |
| 1487 | * \def POLARSSL_GCM_C |
| 1488 | * |
| 1489 | * Enable the Galois/Counter Mode (GCM) for AES. |
| 1490 | * |
| 1491 | * Module: library/gcm.c |
| 1492 | * |
| 1493 | * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C |
| 1494 | * |
| 1495 | * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other |
| 1496 | * requisites are enabled as well. |
| 1497 | */ |
| 1498 | #define POLARSSL_GCM_C |
| 1499 | |
| 1500 | /** |
| 1501 | * \def POLARSSL_HAVEGE_C |
| 1502 | * |
| 1503 | * Enable the HAVEGE random generator. |
| 1504 | * |
| 1505 | * Warning: the HAVEGE random generator is not suitable for virtualized |
| 1506 | * environments |
| 1507 | * |
| 1508 | * Warning: the HAVEGE random generator is dependent on timing and specific |
| 1509 | * processor traits. It is therefore not advised to use HAVEGE as |
| 1510 | * your applications primary random generator or primary entropy pool |
| 1511 | * input. As a secondary input to your entropy pool, it IS able add |
| 1512 | * the (limited) extra entropy it provides. |
| 1513 | * |
| 1514 | * Module: library/havege.c |
| 1515 | * Caller: |
| 1516 | * |
| 1517 | * Requires: POLARSSL_TIMING_C |
| 1518 | * |
| 1519 | * Uncomment to enable the HAVEGE random generator. |
| 1520 | */ |
| 1521 | //#define POLARSSL_HAVEGE_C |
| 1522 | |
| 1523 | /** |
| 1524 | * \def POLARSSL_HMAC_DRBG_C |
| 1525 | * |
| 1526 | * Enable the HMAC_DRBG random generator. |
| 1527 | * |
| 1528 | * Module: library/hmac_drbg.c |
| 1529 | * Caller: |
| 1530 | * |
| 1531 | * Requires: POLARSSL_MD_C |
| 1532 | * |
| 1533 | * Uncomment to enable the HMAC_DRBG random number geerator. |
| 1534 | */ |
| 1535 | #define POLARSSL_HMAC_DRBG_C |
| 1536 | |
| 1537 | /** |
| 1538 | * \def POLARSSL_MD_C |
| 1539 | * |
| 1540 | * Enable the generic message digest layer. |
| 1541 | * |
| 1542 | * Module: library/md.c |
| 1543 | * Caller: |
| 1544 | * |
| 1545 | * Uncomment to enable generic message digest wrappers. |
| 1546 | */ |
| 1547 | #define POLARSSL_MD_C |
| 1548 | |
| 1549 | /** |
| 1550 | * \def POLARSSL_MD2_C |
| 1551 | * |
| 1552 | * Enable the MD2 hash algorithm. |
| 1553 | * |
| 1554 | * Module: library/md2.c |
| 1555 | * Caller: |
| 1556 | * |
| 1557 | * Uncomment to enable support for (rare) MD2-signed X.509 certs. |
| 1558 | */ |
| 1559 | //#define POLARSSL_MD2_C |
| 1560 | |
| 1561 | /** |
| 1562 | * \def POLARSSL_MD4_C |
| 1563 | * |
| 1564 | * Enable the MD4 hash algorithm. |
| 1565 | * |
| 1566 | * Module: library/md4.c |
| 1567 | * Caller: |
| 1568 | * |
| 1569 | * Uncomment to enable support for (rare) MD4-signed X.509 certs. |
| 1570 | */ |
| 1571 | //#define POLARSSL_MD4_C |
| 1572 | |
| 1573 | /** |
| 1574 | * \def POLARSSL_MD5_C |
| 1575 | * |
| 1576 | * Enable the MD5 hash algorithm. |
| 1577 | * |
| 1578 | * Module: library/md5.c |
| 1579 | * Caller: library/md.c |
| 1580 | * library/pem.c |
| 1581 | * library/ssl_tls.c |
| 1582 | * |
| 1583 | * This module is required for SSL/TLS and X.509. |
| 1584 | * PEM_PARSE uses MD5 for decrypting encrypted keys. |
| 1585 | */ |
| 1586 | #define POLARSSL_MD5_C |
| 1587 | |
| 1588 | /** |
| 1589 | * \def POLARSSL_MEMORY_C |
| 1590 | * Deprecated since 1.3.5. Please use POLARSSL_PLATFORM_MEMORY instead. |
| 1591 | */ |
| 1592 | //#define POLARSSL_MEMORY_C |
| 1593 | |
| 1594 | /** |
| 1595 | * \def POLARSSL_MEMORY_BUFFER_ALLOC_C |
| 1596 | * |
| 1597 | * Enable the buffer allocator implementation that makes use of a (stack) |
| 1598 | * based buffer to 'allocate' dynamic memory. (replaces malloc() and free() |
| 1599 | * calls) |
| 1600 | * |
| 1601 | * Module: library/memory_buffer_alloc.c |
| 1602 | * |
| 1603 | * Requires: POLARSSL_PLATFORM_C |
| 1604 | * POLARSSL_PLATFORM_MEMORY (to use it within PolarSSL) |
| 1605 | * |
| 1606 | * Enable this module to enable the buffer memory allocator. |
| 1607 | */ |
| 1608 | //#define POLARSSL_MEMORY_BUFFER_ALLOC_C |
| 1609 | |
| 1610 | /** |
| 1611 | * \def POLARSSL_NET_C |
| 1612 | * |
| 1613 | * Enable the TCP/IP networking routines. |
| 1614 | * |
| 1615 | * Module: library/net.c |
| 1616 | * |
| 1617 | * This module provides TCP/IP networking routines. |
| 1618 | */ |
| 1619 | #define POLARSSL_NET_C |
| 1620 | |
| 1621 | /** |
| 1622 | * \def POLARSSL_OID_C |
| 1623 | * |
| 1624 | * Enable the OID database. |
| 1625 | * |
| 1626 | * Module: library/oid.c |
| 1627 | * Caller: library/asn1write.c |
| 1628 | * library/pkcs5.c |
| 1629 | * library/pkparse.c |
| 1630 | * library/pkwrite.c |
| 1631 | * library/rsa.c |
| 1632 | * library/x509.c |
| 1633 | * library/x509_create.c |
| 1634 | * library/x509_crl.c |
| 1635 | * library/x509_crt.c |
| 1636 | * library/x509_csr.c |
| 1637 | * library/x509write_crt.c |
| 1638 | * library/x509write_csr.c |
| 1639 | * |
| 1640 | * This modules translates between OIDs and internal values. |
| 1641 | */ |
| 1642 | #define POLARSSL_OID_C |
| 1643 | |
| 1644 | /** |
| 1645 | * \def POLARSSL_PADLOCK_C |
| 1646 | * |
| 1647 | * Enable VIA Padlock support on x86. |
| 1648 | * |
| 1649 | * Module: library/padlock.c |
| 1650 | * Caller: library/aes.c |
| 1651 | * |
| 1652 | * Requires: POLARSSL_HAVE_ASM |
| 1653 | * |
| 1654 | * This modules adds support for the VIA PadLock on x86. |
| 1655 | */ |
| 1656 | //#define POLARSSL_PADLOCK_C |
| 1657 | |
| 1658 | /** |
| 1659 | * \def POLARSSL_PBKDF2_C |
| 1660 | * |
| 1661 | * Enable PKCS#5 PBKDF2 key derivation function. |
| 1662 | * DEPRECATED: Use POLARSSL_PKCS5_C instead |
| 1663 | * |
| 1664 | * Module: library/pbkdf2.c |
| 1665 | * |
| 1666 | * Requires: POLARSSL_PKCS5_C |
| 1667 | * |
| 1668 | * This module adds support for the PKCS#5 PBKDF2 key derivation function. |
| 1669 | */ |
| 1670 | #define POLARSSL_PBKDF2_C |
| 1671 | |
| 1672 | /** |
| 1673 | * \def POLARSSL_PEM_PARSE_C |
| 1674 | * |
| 1675 | * Enable PEM decoding / parsing. |
| 1676 | * |
| 1677 | * Module: library/pem.c |
| 1678 | * Caller: library/dhm.c |
| 1679 | * library/pkparse.c |
| 1680 | * library/x509_crl.c |
| 1681 | * library/x509_crt.c |
| 1682 | * library/x509_csr.c |
| 1683 | * |
| 1684 | * Requires: POLARSSL_BASE64_C |
| 1685 | * |
| 1686 | * This modules adds support for decoding / parsing PEM files. |
| 1687 | */ |
| 1688 | #define POLARSSL_PEM_PARSE_C |
| 1689 | |
| 1690 | /** |
| 1691 | * \def POLARSSL_PEM_WRITE_C |
| 1692 | * |
| 1693 | * Enable PEM encoding / writing. |
| 1694 | * |
| 1695 | * Module: library/pem.c |
| 1696 | * Caller: library/pkwrite.c |
| 1697 | * library/x509write_crt.c |
| 1698 | * library/x509write_csr.c |
| 1699 | * |
| 1700 | * Requires: POLARSSL_BASE64_C |
| 1701 | * |
| 1702 | * This modules adds support for encoding / writing PEM files. |
| 1703 | */ |
| 1704 | #define POLARSSL_PEM_WRITE_C |
| 1705 | |
| 1706 | /** |
| 1707 | * \def POLARSSL_PK_C |
| 1708 | * |
| 1709 | * Enable the generic public (asymetric) key layer. |
| 1710 | * |
| 1711 | * Module: library/pk.c |
| 1712 | * Caller: library/ssl_tls.c |
| 1713 | * library/ssl_cli.c |
| 1714 | * library/ssl_srv.c |
| 1715 | * |
| 1716 | * Requires: POLARSSL_RSA_C or POLARSSL_ECP_C |
| 1717 | * |
| 1718 | * Uncomment to enable generic public key wrappers. |
| 1719 | */ |
| 1720 | #define POLARSSL_PK_C |
| 1721 | |
| 1722 | /** |
| 1723 | * \def POLARSSL_PK_PARSE_C |
| 1724 | * |
| 1725 | * Enable the generic public (asymetric) key parser. |
| 1726 | * |
| 1727 | * Module: library/pkparse.c |
| 1728 | * Caller: library/x509_crt.c |
| 1729 | * library/x509_csr.c |
| 1730 | * |
| 1731 | * Requires: POLARSSL_PK_C |
| 1732 | * |
| 1733 | * Uncomment to enable generic public key parse functions. |
| 1734 | */ |
| 1735 | #define POLARSSL_PK_PARSE_C |
| 1736 | |
| 1737 | /** |
| 1738 | * \def POLARSSL_PK_WRITE_C |
| 1739 | * |
| 1740 | * Enable the generic public (asymetric) key writer. |
| 1741 | * |
| 1742 | * Module: library/pkwrite.c |
| 1743 | * Caller: library/x509write.c |
| 1744 | * |
| 1745 | * Requires: POLARSSL_PK_C |
| 1746 | * |
| 1747 | * Uncomment to enable generic public key write functions. |
| 1748 | */ |
| 1749 | #define POLARSSL_PK_WRITE_C |
| 1750 | |
| 1751 | /** |
| 1752 | * \def POLARSSL_PKCS5_C |
| 1753 | * |
| 1754 | * Enable PKCS#5 functions. |
| 1755 | * |
| 1756 | * Module: library/pkcs5.c |
| 1757 | * |
| 1758 | * Requires: POLARSSL_MD_C |
| 1759 | * |
| 1760 | * This module adds support for the PKCS#5 functions. |
| 1761 | */ |
| 1762 | #define POLARSSL_PKCS5_C |
| 1763 | |
| 1764 | /** |
| 1765 | * \def POLARSSL_PKCS11_C |
| 1766 | * |
| 1767 | * Enable wrapper for PKCS#11 smartcard support. |
| 1768 | * |
| 1769 | * Module: library/pkcs11.c |
| 1770 | * Caller: library/pk.c |
| 1771 | * |
| 1772 | * Requires: POLARSSL_PK_C |
| 1773 | * |
| 1774 | * This module enables SSL/TLS PKCS #11 smartcard support. |
| 1775 | * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) |
| 1776 | */ |
| 1777 | //#define POLARSSL_PKCS11_C |
| 1778 | |
| 1779 | /** |
| 1780 | * \def POLARSSL_PKCS12_C |
| 1781 | * |
| 1782 | * Enable PKCS#12 PBE functions. |
| 1783 | * Adds algorithms for parsing PKCS#8 encrypted private keys |
| 1784 | * |
| 1785 | * Module: library/pkcs12.c |
| 1786 | * Caller: library/pkparse.c |
| 1787 | * |
| 1788 | * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_CIPHER_C, POLARSSL_MD_C |
| 1789 | * Can use: POLARSSL_ARC4_C |
| 1790 | * |
| 1791 | * This module enables PKCS#12 functions. |
| 1792 | */ |
| 1793 | #define POLARSSL_PKCS12_C |
| 1794 | |
| 1795 | /** |
| 1796 | * \def POLARSSL_PLATFORM_C |
| 1797 | * |
| 1798 | * Enable the platform abstraction layer that allows you to re-assign |
| 1799 | * functions like malloc(), free(), printf(), fprintf() |
| 1800 | * |
| 1801 | * Module: library/platform.c |
| 1802 | * Caller: Most other .c files |
| 1803 | * |
| 1804 | * This module enables abstraction of common (libc) functions. |
| 1805 | */ |
| 1806 | //#define POLARSSL_PLATFORM_C |
| 1807 | |
| 1808 | /** |
| 1809 | * \def POLARSSL_RIPEMD160_C |
| 1810 | * |
| 1811 | * Enable the RIPEMD-160 hash algorithm. |
| 1812 | * |
| 1813 | * Module: library/ripemd160.c |
| 1814 | * Caller: library/md.c |
| 1815 | * |
| 1816 | */ |
| 1817 | #define POLARSSL_RIPEMD160_C |
| 1818 | |
| 1819 | /** |
| 1820 | * \def POLARSSL_RSA_C |
| 1821 | * |
| 1822 | * Enable the RSA public-key cryptosystem. |
| 1823 | * |
| 1824 | * Module: library/rsa.c |
| 1825 | * Caller: library/ssl_cli.c |
| 1826 | * library/ssl_srv.c |
| 1827 | * library/ssl_tls.c |
| 1828 | * library/x509.c |
| 1829 | * |
| 1830 | * This module is used by the following key exchanges: |
| 1831 | * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK |
| 1832 | * |
| 1833 | * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C |
| 1834 | */ |
| 1835 | #define POLARSSL_RSA_C |
| 1836 | |
| 1837 | /** |
| 1838 | * \def POLARSSL_SHA1_C |
| 1839 | * |
| 1840 | * Enable the SHA1 cryptographic hash algorithm. |
| 1841 | * |
| 1842 | * Module: library/sha1.c |
| 1843 | * Caller: library/md.c |
| 1844 | * library/ssl_cli.c |
| 1845 | * library/ssl_srv.c |
| 1846 | * library/ssl_tls.c |
| 1847 | * library/x509write_crt.c |
| 1848 | * |
| 1849 | * This module is required for SSL/TLS and SHA1-signed certificates. |
| 1850 | */ |
| 1851 | #define POLARSSL_SHA1_C |
| 1852 | |
| 1853 | /** |
| 1854 | * \def POLARSSL_SHA256_C |
| 1855 | * |
| 1856 | * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. |
| 1857 | * (Used to be POLARSSL_SHA2_C) |
| 1858 | * |
| 1859 | * Module: library/sha256.c |
| 1860 | * Caller: library/entropy.c |
| 1861 | * library/md.c |
| 1862 | * library/ssl_cli.c |
| 1863 | * library/ssl_srv.c |
| 1864 | * library/ssl_tls.c |
| 1865 | * |
| 1866 | * This module adds support for SHA-224 and SHA-256. |
| 1867 | * This module is required for the SSL/TLS 1.2 PRF function. |
| 1868 | */ |
| 1869 | #define POLARSSL_SHA256_C |
| 1870 | |
| 1871 | /** |
| 1872 | * \def POLARSSL_SHA512_C |
| 1873 | * |
| 1874 | * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. |
| 1875 | * (Used to be POLARSSL_SHA4_C) |
| 1876 | * |
| 1877 | * Module: library/sha512.c |
| 1878 | * Caller: library/entropy.c |
| 1879 | * library/md.c |
| 1880 | * library/ssl_cli.c |
| 1881 | * library/ssl_srv.c |
| 1882 | * |
| 1883 | * This module adds support for SHA-384 and SHA-512. |
| 1884 | */ |
| 1885 | #define POLARSSL_SHA512_C |
| 1886 | |
| 1887 | /** |
| 1888 | * \def POLARSSL_SSL_CACHE_C |
| 1889 | * |
| 1890 | * Enable simple SSL cache implementation. |
| 1891 | * |
| 1892 | * Module: library/ssl_cache.c |
| 1893 | * Caller: |
| 1894 | * |
| 1895 | * Requires: POLARSSL_SSL_CACHE_C |
| 1896 | */ |
| 1897 | #define POLARSSL_SSL_CACHE_C |
| 1898 | |
| 1899 | /** |
| 1900 | * \def POLARSSL_SSL_CLI_C |
| 1901 | * |
| 1902 | * Enable the SSL/TLS client code. |
| 1903 | * |
| 1904 | * Module: library/ssl_cli.c |
| 1905 | * Caller: |
| 1906 | * |
| 1907 | * Requires: POLARSSL_SSL_TLS_C |
| 1908 | * |
| 1909 | * This module is required for SSL/TLS client support. |
| 1910 | */ |
| 1911 | #define POLARSSL_SSL_CLI_C |
| 1912 | |
| 1913 | /** |
| 1914 | * \def POLARSSL_SSL_SRV_C |
| 1915 | * |
| 1916 | * Enable the SSL/TLS server code. |
| 1917 | * |
| 1918 | * Module: library/ssl_srv.c |
| 1919 | * Caller: |
| 1920 | * |
| 1921 | * Requires: POLARSSL_SSL_TLS_C |
| 1922 | * |
| 1923 | * This module is required for SSL/TLS server support. |
| 1924 | */ |
| 1925 | #define POLARSSL_SSL_SRV_C |
| 1926 | |
| 1927 | /** |
| 1928 | * \def POLARSSL_SSL_TLS_C |
| 1929 | * |
| 1930 | * Enable the generic SSL/TLS code. |
| 1931 | * |
| 1932 | * Module: library/ssl_tls.c |
| 1933 | * Caller: library/ssl_cli.c |
| 1934 | * library/ssl_srv.c |
| 1935 | * |
| 1936 | * Requires: POLARSSL_CIPHER_C, POLARSSL_MD_C |
| 1937 | * and at least one of the POLARSSL_SSL_PROTO_* defines |
| 1938 | * |
| 1939 | * This module is required for SSL/TLS. |
| 1940 | */ |
| 1941 | #define POLARSSL_SSL_TLS_C |
| 1942 | |
| 1943 | /** |
| 1944 | * \def POLARSSL_THREADING_C |
| 1945 | * |
| 1946 | * Enable the threading abstraction layer. |
| 1947 | * By default PolarSSL assumes it is used in a non-threaded environment or that |
| 1948 | * contexts are not shared between threads. If you do intend to use contexts |
| 1949 | * between threads, you will need to enable this layer to prevent race |
| 1950 | * conditions. |
| 1951 | * |
| 1952 | * Module: library/threading.c |
| 1953 | * |
| 1954 | * This allows different threading implementations (self-implemented or |
| 1955 | * provided). |
| 1956 | * |
| 1957 | * You will have to enable either POLARSSL_THREADING_ALT or |
| 1958 | * POLARSSL_THREADING_PTHREAD. |
| 1959 | * |
| 1960 | * Enable this layer to allow use of mutexes within PolarSSL |
| 1961 | */ |
| 1962 | //#define POLARSSL_THREADING_C |
| 1963 | |
| 1964 | /** |
| 1965 | * \def POLARSSL_TIMING_C |
| 1966 | * |
| 1967 | * Enable the portable timing interface. |
| 1968 | * |
| 1969 | * Module: library/timing.c |
| 1970 | * Caller: library/havege.c |
| 1971 | * |
| 1972 | * This module is used by the HAVEGE random number generator. |
| 1973 | */ |
| 1974 | #define POLARSSL_TIMING_C |
| 1975 | |
| 1976 | /** |
| 1977 | * \def POLARSSL_VERSION_C |
| 1978 | * |
| 1979 | * Enable run-time version information. |
| 1980 | * |
| 1981 | * Module: library/version.c |
| 1982 | * |
| 1983 | * This module provides run-time version information. |
| 1984 | */ |
| 1985 | #define POLARSSL_VERSION_C |
| 1986 | |
| 1987 | /** |
| 1988 | * \def POLARSSL_X509_USE_C |
| 1989 | * |
| 1990 | * Enable X.509 core for using certificates. |
| 1991 | * |
| 1992 | * Module: library/x509.c |
| 1993 | * Caller: library/x509_crl.c |
| 1994 | * library/x509_crt.c |
| 1995 | * library/x509_csr.c |
| 1996 | * |
| 1997 | * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_BIGNUM_C, POLARSSL_OID_C, |
| 1998 | * POLARSSL_PK_PARSE_C |
| 1999 | * |
| 2000 | * This module is required for the X.509 parsing modules. |
| 2001 | */ |
| 2002 | #define POLARSSL_X509_USE_C |
| 2003 | |
| 2004 | /** |
| 2005 | * \def POLARSSL_X509_CRT_PARSE_C |
| 2006 | * |
| 2007 | * Enable X.509 certificate parsing. |
| 2008 | * |
| 2009 | * Module: library/x509_crt.c |
| 2010 | * Caller: library/ssl_cli.c |
| 2011 | * library/ssl_srv.c |
| 2012 | * library/ssl_tls.c |
| 2013 | * |
| 2014 | * Requires: POLARSSL_X509_USE_C |
| 2015 | * |
| 2016 | * This module is required for X.509 certificate parsing. |
| 2017 | */ |
| 2018 | #define POLARSSL_X509_CRT_PARSE_C |
| 2019 | |
| 2020 | /** |
| 2021 | * \def POLARSSL_X509_CRL_PARSE_C |
| 2022 | * |
| 2023 | * Enable X.509 CRL parsing. |
| 2024 | * |
| 2025 | * Module: library/x509_crl.c |
| 2026 | * Caller: library/x509_crt.c |
| 2027 | * |
| 2028 | * Requires: POLARSSL_X509_USE_C |
| 2029 | * |
| 2030 | * This module is required for X.509 CRL parsing. |
| 2031 | */ |
| 2032 | #define POLARSSL_X509_CRL_PARSE_C |
| 2033 | |
| 2034 | /** |
| 2035 | * \def POLARSSL_X509_CSR_PARSE_C |
| 2036 | * |
| 2037 | * Enable X.509 Certificate Signing Request (CSR) parsing. |
| 2038 | * |
| 2039 | * Module: library/x509_csr.c |
| 2040 | * Caller: library/x509_crt_write.c |
| 2041 | * |
| 2042 | * Requires: POLARSSL_X509_USE_C |
| 2043 | * |
| 2044 | * This module is used for reading X.509 certificate request. |
| 2045 | */ |
| 2046 | #define POLARSSL_X509_CSR_PARSE_C |
| 2047 | |
| 2048 | /** |
| 2049 | * \def POLARSSL_X509_CREATE_C |
| 2050 | * |
| 2051 | * Enable X.509 core for creating certificates. |
| 2052 | * |
| 2053 | * Module: library/x509_create.c |
| 2054 | * |
| 2055 | * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C, POLARSSL_PK_WRITE_C |
| 2056 | * |
| 2057 | * This module is the basis for creating X.509 certificates and CSRs. |
| 2058 | */ |
| 2059 | #define POLARSSL_X509_CREATE_C |
| 2060 | |
| 2061 | /** |
| 2062 | * \def POLARSSL_X509_CRT_WRITE_C |
| 2063 | * |
| 2064 | * Enable creating X.509 certificates. |
| 2065 | * |
| 2066 | * Module: library/x509_crt_write.c |
| 2067 | * |
| 2068 | * Requires: POLARSSL_CREATE_C |
| 2069 | * |
| 2070 | * This module is required for X.509 certificate creation. |
| 2071 | */ |
| 2072 | #define POLARSSL_X509_CRT_WRITE_C |
| 2073 | |
| 2074 | /** |
| 2075 | * \def POLARSSL_X509_CSR_WRITE_C |
| 2076 | * |
| 2077 | * Enable creating X.509 Certificate Signing Requests (CSR). |
| 2078 | * |
| 2079 | * Module: library/x509_csr_write.c |
| 2080 | * |
| 2081 | * Requires: POLARSSL_CREATE_C |
| 2082 | * |
| 2083 | * This module is required for X.509 certificate request writing. |
| 2084 | */ |
| 2085 | #define POLARSSL_X509_CSR_WRITE_C |
| 2086 | |
| 2087 | /** |
| 2088 | * \def POLARSSL_XTEA_C |
| 2089 | * |
| 2090 | * Enable the XTEA block cipher. |
| 2091 | * |
| 2092 | * Module: library/xtea.c |
| 2093 | * Caller: |
| 2094 | */ |
| 2095 | #define POLARSSL_XTEA_C |
| 2096 | |
| 2097 | /* \} name SECTION: PolarSSL modules */ |
| 2098 | |
| 2099 | /** |
| 2100 | * \name SECTION: Module configuration options |
| 2101 | * |
| 2102 | * This section allows for the setting of module specific sizes and |
| 2103 | * configuration options. The default values are already present in the |
| 2104 | * relevant header files and should suffice for the regular use cases. |
| 2105 | * |
| 2106 | * Our advice is to enable options and change their values here |
| 2107 | * only if you have a good reason and know the consequences. |
| 2108 | * |
| 2109 | * Please check the respective header file for documentation on these |
| 2110 | * parameters (to prevent duplicate documentation). |
| 2111 | * \{ |
| 2112 | */ |
| 2113 | |
| 2114 | /* MPI / BIGNUM options */ |
| 2115 | //#define POLARSSL_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ |
| 2116 | //#define POLARSSL_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ |
| 2117 | |
| 2118 | /* CTR_DRBG options */ |
| 2119 | //#define CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ |
| 2120 | //#define CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ |
| 2121 | //#define CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ |
| 2122 | //#define CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ |
| 2123 | //#define CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ |
| 2124 | |
| 2125 | /* HMAC_DRBG options */ |
| 2126 | //#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ |
| 2127 | //#define POLARSSL_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ |
| 2128 | //#define POLARSSL_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ |
| 2129 | //#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ |
| 2130 | |
| 2131 | /* ECP options */ |
| 2132 | //#define POLARSSL_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ |
| 2133 | //#define POLARSSL_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ |
| 2134 | //#define POLARSSL_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ |
| 2135 | |
| 2136 | /* Entropy options */ |
| 2137 | //#define ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ |
| 2138 | //#define ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ |
| 2139 | |
| 2140 | /* Memory buffer allocator options */ |
| 2141 | //#define POLARSSL_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ |
| 2142 | |
| 2143 | /* Platform options */ |
| 2144 | //#define POLARSSL_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if POLARSSL_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ |
| 2145 | //#define POLARSSL_PLATFORM_STD_MALLOC malloc /**< Default allocator to use, can be undefined */ |
| 2146 | //#define POLARSSL_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ |
| 2147 | //#define POLARSSL_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */ |
| 2148 | //#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */ |
| 2149 | |
| 2150 | /* SSL Cache options */ |
| 2151 | //#define SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ |
| 2152 | //#define SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ |
| 2153 | |
| 2154 | /* SSL options */ |
| 2155 | //#define SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */ |
| 2156 | //#define SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ |
| 2157 | //#define POLARSSL_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */ |
| 2158 | |
| 2159 | /** |
| 2160 | * Complete list of ciphersuites to use, in order of preference. |
| 2161 | * |
| 2162 | * \warning No dependency checking is done on that field! This option can only |
| 2163 | * be used to restrict the set of available ciphersuites. It is your |
| 2164 | * responsibility to make sure the needed modules are active. |
| 2165 | * |
| 2166 | * Use this to save a few hundred bytes of ROM (default ordering of all |
| 2167 | * available ciphersuites) and a few to a few hundred bytes of RAM. |
| 2168 | * |
| 2169 | * The value below is only an example, not the default. |
| 2170 | */ |
| 2171 | //#define SSL_CIPHERSUITES TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| 2172 | |
| 2173 | /* Debug options */ |
| 2174 | //#define POLARSSL_DEBUG_DFL_MODE POLARSSL_DEBUG_LOG_FULL /**< Default log: Full or Raw */ |
| 2175 | |
| 2176 | /* \} name SECTION: Module configuration options */ |
| 2177 | |
| 2178 | |
| 2179 | #endif /* POLARSSL_CONFIG_H */ |