Merge pull request #524 from Proxmark/iceman1001-patch-1

[proxmark3-svn] / armsrc / lfsampling.c

//-----------------------------------------------------------------------------
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Miscellaneous routines for low frequency sampling.
//-----------------------------------------------------------------------------

#include "proxmark3.h"
#include "apps.h"
#include "util.h"
#include "string.h"
#include "lfsampling.h"
#include "usb_cdc.h"	// for usb_poll_validate_length
//#include "ticks.h"		// for StartTicks

sample_config config = { 1, 8, 1, 95, 0 } ;

void printConfig()
{
	Dbprintf("LF Sampling config: ");
	Dbprintf("  [q] divisor:           %d ", config.divisor);
	Dbprintf("  [b] bps:               %d ", config.bits_per_sample);
	Dbprintf("  [d] decimation:        %d ", config.decimation);
	Dbprintf("  [a] averaging:         %d ", config.averaging);
	Dbprintf("  [t] trigger threshold: %d ", config.trigger_threshold);
}


/**
 * Called from the USB-handler to set the sampling configuration
 * The sampling config is used for std reading and snooping.
 *
 * Other functions may read samples and ignore the sampling config,
 * such as functions to read the UID from a prox tag or similar.
 *
 * Values set to '0' implies no change (except for averaging)
 * @brief setSamplingConfig
 * @param sc
 */
void setSamplingConfig(sample_config *sc)
{
	if(sc->divisor != 0) config.divisor = sc->divisor;
	if(sc->bits_per_sample!= 0) config.bits_per_sample= sc->bits_per_sample;
	if(sc->decimation!= 0) config.decimation= sc->decimation;
	if(sc->trigger_threshold != -1) config.trigger_threshold= sc->trigger_threshold;

	config.averaging= sc->averaging;
	if(config.bits_per_sample > 8)	config.bits_per_sample = 8;
	if(config.decimation < 1)	config.decimation = 1;

	printConfig();
}

sample_config* getSamplingConfig()
{
	return &config;
}

typedef struct {
	uint8_t * buffer;
	uint32_t numbits;
	uint32_t position;
} BitstreamOut;

/**
 * @brief Pushes bit onto the stream
 * @param stream
 * @param bit
 */
void pushBit( BitstreamOut* stream, uint8_t bit)
{
	int bytepos = stream->position >> 3; // divide by 8
	int bitpos = stream->position & 7;
	*(stream->buffer+bytepos) |= (bit > 0) <<  (7 - bitpos);
	stream->position++;
	stream->numbits++;
}

/**
* Setup the FPGA to listen for samples. This method downloads the FPGA bitstream
* if not already loaded, sets divisor and starts up the antenna.
* @param divisor : 1, 88> 255 or negative ==> 134.8 KHz
* 				   0 or 95 ==> 125 KHz
*
**/
void LFSetupFPGAForADC(int divisor, bool lf_field)
{
	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
	if ( (divisor == 1) || (divisor < 0) || (divisor > 255) )
		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
	else if (divisor == 0)
		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
	else
		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);

	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0));

	// Connect the A/D to the peak-detected low-frequency path.
	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
	// Give it a bit of time for the resonant antenna to settle.
	SpinDelay(50);
	// Now set up the SSC to get the ADC samples that are now streaming at us.
	FpgaSetupSsc();
}

/**
 * Does the sample acquisition. If threshold is specified, the actual sampling
 * is not commenced until the threshold has been reached.
 * This method implements decimation and quantization in order to
 * be able to provide longer sample traces.
 * Uses the following global settings:
 * @param decimation - how much should the signal be decimated. A decimation of N means we keep 1 in N samples, etc.
 * @param bits_per_sample - bits per sample. Max 8, min 1 bit per sample.
 * @param averaging If set to true, decimation will use averaging, so that if e.g. decimation is 3, the sample
 * value that will be used is the average value of the three samples.
 * @param trigger_threshold - a threshold. The sampling won't commence until this threshold has been reached. Set
 * to -1 to ignore threshold.
 * @param silent - is true, now outputs are made. If false, dbprints the status
 * @return the number of bits occupied by the samples.
 */
uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold, bool silent, int bufsize, int cancel_after)
{
	//.
	uint8_t *dest = BigBuf_get_addr();
	bufsize = (bufsize > 0 && bufsize < BigBuf_max_traceLen()) ? bufsize : BigBuf_max_traceLen();

	//memset(dest, 0, bufsize); //creates issues with cmdread (marshmellow)

	if(bits_per_sample < 1) bits_per_sample = 1;
	if(bits_per_sample > 8) bits_per_sample = 8;

	if(decimation < 1) decimation = 1;

	// Use a bit stream to handle the output
	BitstreamOut data = { dest , 0, 0};
	int sample_counter = 0;
	uint8_t sample = 0;
	//If we want to do averaging
	uint32_t sample_sum =0 ;
	uint32_t sample_total_numbers =0 ;
	uint32_t sample_total_saved =0 ;
	uint32_t cancel_counter = 0;

	while(!BUTTON_PRESS() && !usb_poll_validate_length() ) {
		WDT_HIT();
		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
			AT91C_BASE_SSC->SSC_THR = 0x43;
			LED_D_ON();
		}
		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
			sample = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
			LED_D_OFF();
			// threshold either high or low values 128 = center 0.  if trigger = 178 
			if ((trigger_threshold > 0) && (sample < (trigger_threshold+128)) && (sample > (128-trigger_threshold))) { // 
				if (cancel_after > 0) cancel_counter++;
				if (cancel_after == cancel_counter) break;
				continue;
			}
			trigger_threshold = 0;
			sample_total_numbers++;

			if(averaging)
			{
				sample_sum += sample;
			}
			//Check decimation
			if(decimation > 1)
			{
				sample_counter++;
				if(sample_counter < decimation) continue;
				sample_counter = 0;
			}
			//Averaging
			if(averaging && decimation > 1) {
				sample = sample_sum / decimation;
				sample_sum =0;
			}
			//Store the sample
			sample_total_saved ++;
			if(bits_per_sample == 8){
				dest[sample_total_saved-1] = sample;
				data.numbits = sample_total_saved << 3;//Get the return value correct
				if(sample_total_saved >= bufsize) break;
			}
			else{
				pushBit(&data, sample & 0x80);
				if(bits_per_sample > 1)	pushBit(&data, sample & 0x40);
				if(bits_per_sample > 2)	pushBit(&data, sample & 0x20);
				if(bits_per_sample > 3)	pushBit(&data, sample & 0x10);
				if(bits_per_sample > 4)	pushBit(&data, sample & 0x08);
				if(bits_per_sample > 5)	pushBit(&data, sample & 0x04);
				if(bits_per_sample > 6)	pushBit(&data, sample & 0x02);
				//Not needed, 8bps is covered above
				//if(bits_per_sample > 7)	pushBit(&data, sample & 0x01);
				if((data.numbits >> 3) +1  >= bufsize) break;
			}
		}
	}

	if(!silent)
	{
		Dbprintf("Done, saved %d out of %d seen samples at %d bits/sample",sample_total_saved, sample_total_numbers,bits_per_sample);
		Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
					dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
	}
	return data.numbits;
}
/**
 * @brief Does sample acquisition, ignoring the config values set in the sample_config.
 * This method is typically used by tag-specific readers who just wants to read the samples
 * the normal way
 * @param trigger_threshold
 * @param silent
 * @return number of bits sampled
 */
uint32_t DoAcquisition_default(int trigger_threshold, bool silent)
{
	return DoAcquisition(1,8,0,trigger_threshold,silent,0,0);
}
uint32_t DoAcquisition_config(bool silent, int sample_size)
{
	return DoAcquisition(config.decimation
				  ,config.bits_per_sample
				  ,config.averaging
				  ,config.trigger_threshold
				  ,silent
				  ,sample_size
				  ,0);
}

uint32_t DoPartialAcquisition(int trigger_threshold, bool silent, int sample_size, int cancel_after) {
	return DoAcquisition(1,8,0,trigger_threshold,silent,sample_size,cancel_after);
}

uint32_t ReadLF(bool activeField, bool silent, int sample_size)
{
	if (!silent) printConfig();
	LFSetupFPGAForADC(config.divisor, activeField);
	// Now call the acquisition routine
	return DoAcquisition_config(silent, sample_size);
}

/**
* Initializes the FPGA for reader-mode (field on), and acquires the samples.
* @return number of bits sampled
**/
uint32_t SampleLF(bool printCfg, int sample_size)
{
	uint32_t ret = ReadLF(true, printCfg, sample_size);
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
	return ret;
}
/**
* Initializes the FPGA for snoop-mode (field off), and acquires the samples.
* @return number of bits sampled
**/

uint32_t SnoopLF()
{
	uint32_t ret = ReadLF(false, true, 0);
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
	return ret;
}

/**
* acquisition of Cotag LF signal. Similart to other LF,  since the Cotag has such long datarate RF/384
* and is Manchester?,  we directly gather the manchester data into bigbuff
**/
#define COTAG_T1 384
#define COTAG_T2 (COTAG_T1>>1)
#define COTAG_ONE_THRESHOLD 128+30
#define COTAG_ZERO_THRESHOLD 128-30
#ifndef COTAG_BITS
#define COTAG_BITS 264
#endif
void doCotagAcquisition(size_t sample_size) {

	uint8_t *dest = BigBuf_get_addr();
	uint16_t bufsize = BigBuf_max_traceLen();
	
	if ( bufsize > sample_size )
		bufsize = sample_size;

	dest[0] = 0;
	uint8_t sample = 0, firsthigh = 0, firstlow = 0; 
	uint16_t i = 0;

	while (!BUTTON_PRESS() && !usb_poll_validate_length() && (i < bufsize) ) {
		WDT_HIT();
		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
			AT91C_BASE_SSC->SSC_THR = 0x43;
			LED_D_ON();
		}
		
		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
			sample = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
			LED_D_OFF();
		
			// find first peak
			if ( !firsthigh ) {
				if (sample < COTAG_ONE_THRESHOLD) 
					continue;
				firsthigh = 1;
			}
			if ( !firstlow ){
				if (sample > COTAG_ZERO_THRESHOLD )
					continue;
				firstlow = 1;
			}

			++i;
	
			if ( sample > COTAG_ONE_THRESHOLD)
				dest[i] = 255;
			else if ( sample < COTAG_ZERO_THRESHOLD)
				dest[i] = 0;
			else 
				dest[i] = dest[i-1];
		}
	}
}

uint32_t doCotagAcquisitionManchester() {

	uint8_t *dest = BigBuf_get_addr();
	uint16_t bufsize = BigBuf_max_traceLen();
	
	if ( bufsize > COTAG_BITS )
		bufsize = COTAG_BITS;

	dest[0] = 0;
	uint8_t sample = 0, firsthigh = 0, firstlow = 0; 
	uint16_t sample_counter = 0, period = 0;
	uint8_t curr = 0, prev = 0;
	uint16_t noise_counter = 0;
	while (!BUTTON_PRESS() && !usb_poll_validate_length() && (sample_counter < bufsize) && (noise_counter < (COTAG_T1<<1)) ) {
		WDT_HIT();
		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
			AT91C_BASE_SSC->SSC_THR = 0x43;
			LED_D_ON();
		}

		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
			sample = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
			LED_D_OFF();

			// find first peak
			if ( !firsthigh ) {
				if (sample < COTAG_ONE_THRESHOLD) {
					noise_counter++;
					continue;
				}
				noise_counter = 0;
				firsthigh = 1;
			}

			if ( !firstlow ){
				if (sample > COTAG_ZERO_THRESHOLD ) {
					noise_counter++;
					continue;
				}
				noise_counter=0;
				firstlow = 1;
			}

			// set sample 255, 0,  or previous
			if ( sample > COTAG_ONE_THRESHOLD){
				prev = curr;
				curr = 1;
			}
			else if ( sample < COTAG_ZERO_THRESHOLD) {
				prev = curr;
				curr = 0;
			}
			else {
				curr = prev;
			}

			// full T1 periods, 
			if ( period > 0 ) {
				--period;
				continue;
			}

			dest[sample_counter] = curr;
			++sample_counter;
			period = COTAG_T1;
		}
	}
	return sample_counter;
}