| 1 | #define our ports |
| 2 | telnet_port 4444 |
| 3 | gdb_port 3333 |
| 4 | |
| 5 | #commands specific to the Amontec JTAGKey |
| 6 | interface ft2232 |
| 7 | ft2232_device_desc "Amontec JTAGkey A" |
| 8 | ft2232_layout jtagkey |
| 9 | ft2232_vid_pid 0x0403 0xcff8 |
| 10 | jtag_khz 200 |
| 11 | jtag_nsrst_delay 200 |
| 12 | jtag_ntrst_delay 200 |
| 13 | |
| 14 | #reset_config <signals> [combination] [trst_type] [srst_type] |
| 15 | reset_config srst_only srst_pulls_trst |
| 16 | |
| 17 | jtag newtap sam7x256 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f |
| 18 | |
| 19 | target create sam7x256.cpu arm7tdmi -endian little -chain-position sam7x256.cpu -variant arm7tdmi |
| 20 | |
| 21 | gdb_memory_map enable |
| 22 | |
| 23 | sam7x256.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0 |
| 24 | flash bank at91sam7 0x100000 0x40000 0 4 sam7x256.cpu |