| | 1 | //-----------------------------------------------------------------------------\r |
| | 2 | //\r |
| | 3 | // This code is licensed to you under the terms of the GNU GPL, version 2 or,\r |
| | 4 | // at your option, any later version. See the LICENSE.txt file for the text of\r |
| | 5 | // the license.\r |
| | 6 | //-----------------------------------------------------------------------------\r |
| | 7 | // Low frequency T55xx commands\r |
| | 8 | //-----------------------------------------------------------------------------\r |
| | 9 | \r |
| | 10 | #ifndef CMDLFT55XX_H__\r |
| | 11 | #define CMDLFT55XX_H__\r |
| | 12 | \r |
| | 13 | // config blocks\r |
| | 14 | #define T55X7_DEFAULT_CONFIG_BLOCK 0x000880E8 // compat mode, data rate 32, manchester, ST, 7 data blocks\r |
| | 15 | #define T55X7_RAW_CONFIG_BLOCK 0x000880E0 // compat mode, data rate 32, manchester, 7 data blocks\r |
| | 16 | \r |
| | 17 | #define T55X7_EM_UNIQUE_CONFIG_BLOCK 0x00148040 // emulate em4x02/unique - compat mode, manchester, data rate 64, 2 data blocks\r |
| | 18 | \r |
| | 19 | \r |
| | 20 | // FDXB requires data inversion and BiPhase 57 is simply BipHase 50 inverted, so we can either do it using the modulation scheme or the inversion flag\r |
| | 21 | // we've done both below to prove that it works either way, and the modulation value for BiPhase 50 in the Atmel data sheet of binary "10001" (17) is a typo,\r |
| | 22 | // and it should actually be "10000" (16)\r |
| | 23 | // #define T55X7_FDXB_CONFIG_BLOCK 903F8080 // emulate fdx-b - xtended mode, BiPhase ('57), data rate 32, 4 data blocks\r |
| | 24 | #define T55X7_FDXB_CONFIG_BLOCK 0x903F0082 // emulate fdx-b - xtended mode, BiPhase ('50), invert data, data rate 32, 4 data blocks\r |
| | 25 | #define T55X7_HID_26_CONFIG_BLOCK 0x00107060 // hid 26 bit - compat mode, FSK2a, data rate 50, 3 data blocks\r |
| | 26 | #define T55X7_INDALA_64_CONFIG_BLOCK 0x00081040 // emulate indala 64 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 2\r |
| | 27 | #define T55X7_INDALA_224_CONFIG_BLOCK 0x000810E0 // emulate indala 224 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 7\r |
| | 28 | #define T55X7_GUARDPROXII_CONFIG_BLOCK 0x00150060 // bitrate 64pcb, Direct modulation, Biphase, 3 data blocks\r |
| | 29 | #define T55X7_VIKING_CONFIG_BLOCK 0x00088040 // compat mode, data rate 32, Manchester, 2 data blocks\r |
| | 30 | #define T55X7_NORALYS_CONFIG_BLOCK 0x00088C6A // compat mode, (NORALYS - KCP3000)\r |
| | 31 | #define T55X7_IOPROX_CONFIG_BLOCK 0x00147040 // maxblock 2\r |
| | 32 | #define T55X7_bin 0b0010\r |
| | 33 | \r |
| | 34 | \r |
| | 35 | typedef struct {\r |
| | 36 | enum {\r |
| | 37 | DEMOD_NRZ = 0x00, \r |
| | 38 | DEMOD_PSK1 = 0x01,\r |
| | 39 | DEMOD_PSK2 = 0x02,\r |
| | 40 | DEMOD_PSK3 = 0x03,\r |
| | 41 | DEMOD_FSK1 = 0x04, \r |
| | 42 | DEMOD_FSK1a = 0x05, \r |
| | 43 | DEMOD_FSK2 = 0x06, \r |
| | 44 | DEMOD_FSK2a = 0x07, \r |
| | 45 | DEMOD_FSK = 0xF0, //generic FSK (auto detect FCs) \r |
| | 46 | DEMOD_ASK = 0x08,\r |
| | 47 | DEMOD_BI = 0x10,\r |
| | 48 | DEMOD_BIa = 0x18, \r |
| | 49 | } modulation;\r |
| | 50 | bool inverted;\r |
| | 51 | uint8_t offset;\r |
| | 52 | uint32_t block0;\r |
| | 53 | enum {\r |
| | 54 | RF_8 = 0x00,\r |
| | 55 | RF_16 = 0x01,\r |
| | 56 | RF_32 = 0x02,\r |
| | 57 | RF_40 = 0x03,\r |
| | 58 | RF_50 = 0x04,\r |
| | 59 | RF_64 = 0x05,\r |
| | 60 | RF_100 = 0x06,\r |
| | 61 | RF_128 = 0x07,\r |
| | 62 | } bitrate;\r |
| | 63 | bool Q5;\r |
| | 64 | } t55xx_conf_block_t;\r |
| | 65 | t55xx_conf_block_t Get_t55xx_Config();\r |
| | 66 | void Set_t55xx_Config(t55xx_conf_block_t conf);\r |
| | 67 | \r |
| | 68 | \r |
| | 69 | int CmdLFT55XX(const char *Cmd);\r |
| | 70 | int CmdT55xxSetConfig(const char *Cmd);\r |
| | 71 | int CmdT55xxReadBlock(const char *Cmd);\r |
| | 72 | int CmdT55xxWriteBlock(const char *Cmd);\r |
| | 73 | int CmdT55xxReadTrace(const char *Cmd);\r |
| | 74 | int CmdT55xxInfo(const char *Cmd);\r |
| | 75 | int CmdT55xxDetect(const char *Cmd);\r |
| | 76 | int CmdResetRead(const char *Cmd);\r |
| | 77 | int CmdT55xxWipe(const char *Cmd);\r |
| | 78 | int CmdT55xxBruteForce(const char *Cmd);\r |
| | 79 | \r |
| | 80 | char * GetBitRateStr(uint32_t id);\r |
| | 81 | char * GetSaferStr(uint32_t id);\r |
| | 82 | char * GetModulationStr( uint32_t id);\r |
| | 83 | char * GetModelStrFromCID(uint32_t cid);\r |
| | 84 | char * GetSelectedModulationStr( uint8_t id);\r |
| | 85 | uint32_t PackBits(uint8_t start, uint8_t len, uint8_t *bitstream);\r |
| | 86 | void printT5xxHeader(uint8_t page);\r |
| | 87 | void printT55xxBlock(const char *demodStr);\r |
| | 88 | int printConfiguration( t55xx_conf_block_t b);\r |
| | 89 | \r |
| | 90 | bool DecodeT55xxBlock();\r |
| | 91 | bool tryDetectModulation();\r |
| | 92 | bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5);\r |
| | 93 | int special(const char *Cmd);\r |
| | 94 | int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password );\r |
| | 95 | \r |
| | 96 | bool detectPassword(int password);\r |
| | 97 | #endif\r |
projects / proxmark3-svn / blame_incremental