]> git.zerfleddert.de Git - proxmark3-svn/blame_incremental - armsrc/iso14443.c
BigBuf and tracing rework: allow much longer traces in in hf commands
[proxmark3-svn] / armsrc / iso14443.c
... / ...
CommitLineData
1//-----------------------------------------------------------------------------
2// Jonathan Westhues, split Nov 2006
3//
4// This code is licensed to you under the terms of the GNU GPL, version 2 or,
5// at your option, any later version. See the LICENSE.txt file for the text of
6// the license.
7//-----------------------------------------------------------------------------
8// Routines to support ISO 14443. This includes both the reader software and
9// the `fake tag' modes. At the moment only the Type B modulation is
10// supported.
11//-----------------------------------------------------------------------------
12
13#include "proxmark3.h"
14#include "apps.h"
15#include "util.h"
16#include "string.h"
17
18#include "iso14443crc.h"
19
20//static void GetSamplesFor14443(int weTx, int n);
21
22#define DEMOD_TRACE_SIZE 4096
23#define READER_TAG_BUFFER_SIZE 2048
24#define TAG_READER_BUFFER_SIZE 2048
25#define DEMOD_DMA_BUFFER_SIZE 1024
26
27//=============================================================================
28// An ISO 14443 Type B tag. We listen for commands from the reader, using
29// a UART kind of thing that's implemented in software. When we get a
30// frame (i.e., a group of bytes between SOF and EOF), we check the CRC.
31// If it's good, then we can do something appropriate with it, and send
32// a response.
33//=============================================================================
34
35//-----------------------------------------------------------------------------
36// Code up a string of octets at layer 2 (including CRC, we don't generate
37// that here) so that they can be transmitted to the reader. Doesn't transmit
38// them yet, just leaves them ready to send in ToSend[].
39//-----------------------------------------------------------------------------
40static void CodeIso14443bAsTag(const uint8_t *cmd, int len)
41{
42 int i;
43
44 ToSendReset();
45
46 // Transmit a burst of ones, as the initial thing that lets the
47 // reader get phase sync. This (TR1) must be > 80/fs, per spec,
48 // but tag that I've tried (a Paypass) exceeds that by a fair bit,
49 // so I will too.
50 for(i = 0; i < 20; i++) {
51 ToSendStuffBit(1);
52 ToSendStuffBit(1);
53 ToSendStuffBit(1);
54 ToSendStuffBit(1);
55 }
56
57 // Send SOF.
58 for(i = 0; i < 10; i++) {
59 ToSendStuffBit(0);
60 ToSendStuffBit(0);
61 ToSendStuffBit(0);
62 ToSendStuffBit(0);
63 }
64 for(i = 0; i < 2; i++) {
65 ToSendStuffBit(1);
66 ToSendStuffBit(1);
67 ToSendStuffBit(1);
68 ToSendStuffBit(1);
69 }
70
71 for(i = 0; i < len; i++) {
72 int j;
73 uint8_t b = cmd[i];
74
75 // Start bit
76 ToSendStuffBit(0);
77 ToSendStuffBit(0);
78 ToSendStuffBit(0);
79 ToSendStuffBit(0);
80
81 // Data bits
82 for(j = 0; j < 8; j++) {
83 if(b & 1) {
84 ToSendStuffBit(1);
85 ToSendStuffBit(1);
86 ToSendStuffBit(1);
87 ToSendStuffBit(1);
88 } else {
89 ToSendStuffBit(0);
90 ToSendStuffBit(0);
91 ToSendStuffBit(0);
92 ToSendStuffBit(0);
93 }
94 b >>= 1;
95 }
96
97 // Stop bit
98 ToSendStuffBit(1);
99 ToSendStuffBit(1);
100 ToSendStuffBit(1);
101 ToSendStuffBit(1);
102 }
103
104 // Send SOF.
105 for(i = 0; i < 10; i++) {
106 ToSendStuffBit(0);
107 ToSendStuffBit(0);
108 ToSendStuffBit(0);
109 ToSendStuffBit(0);
110 }
111 for(i = 0; i < 10; i++) {
112 ToSendStuffBit(1);
113 ToSendStuffBit(1);
114 ToSendStuffBit(1);
115 ToSendStuffBit(1);
116 }
117
118 // Convert from last byte pos to length
119 ToSendMax++;
120
121 // Add a few more for slop
122 ToSendMax += 2;
123}
124
125//-----------------------------------------------------------------------------
126// The software UART that receives commands from the reader, and its state
127// variables.
128//-----------------------------------------------------------------------------
129static struct {
130 enum {
131 STATE_UNSYNCD,
132 STATE_GOT_FALLING_EDGE_OF_SOF,
133 STATE_AWAITING_START_BIT,
134 STATE_RECEIVING_DATA,
135 STATE_ERROR_WAIT
136 } state;
137 uint16_t shiftReg;
138 int bitCnt;
139 int byteCnt;
140 int byteCntMax;
141 int posCnt;
142 uint8_t *output;
143} Uart;
144
145/* Receive & handle a bit coming from the reader.
146 *
147 * LED handling:
148 * LED A -> ON once we have received the SOF and are expecting the rest.
149 * LED A -> OFF once we have received EOF or are in error state or unsynced
150 *
151 * Returns: true if we received a EOF
152 * false if we are still waiting for some more
153 */
154static int Handle14443UartBit(int bit)
155{
156 switch(Uart.state) {
157 case STATE_UNSYNCD:
158 LED_A_OFF();
159 if(!bit) {
160 // we went low, so this could be the beginning
161 // of an SOF
162 Uart.state = STATE_GOT_FALLING_EDGE_OF_SOF;
163 Uart.posCnt = 0;
164 Uart.bitCnt = 0;
165 }
166 break;
167
168 case STATE_GOT_FALLING_EDGE_OF_SOF:
169 Uart.posCnt++;
170 if(Uart.posCnt == 2) {
171 if(bit) {
172 if(Uart.bitCnt >= 10) {
173 // we've seen enough consecutive
174 // zeros that it's a valid SOF
175 Uart.posCnt = 0;
176 Uart.byteCnt = 0;
177 Uart.state = STATE_AWAITING_START_BIT;
178 LED_A_ON(); // Indicate we got a valid SOF
179 } else {
180 // didn't stay down long enough
181 // before going high, error
182 Uart.state = STATE_ERROR_WAIT;
183 }
184 } else {
185 // do nothing, keep waiting
186 }
187 Uart.bitCnt++;
188 }
189 if(Uart.posCnt >= 4) Uart.posCnt = 0;
190 if(Uart.bitCnt > 14) {
191 // Give up if we see too many zeros without
192 // a one, too.
193 Uart.state = STATE_ERROR_WAIT;
194 }
195 break;
196
197 case STATE_AWAITING_START_BIT:
198 Uart.posCnt++;
199 if(bit) {
200 if(Uart.posCnt > 25) {
201 // stayed high for too long between
202 // characters, error
203 Uart.state = STATE_ERROR_WAIT;
204 }
205 } else {
206 // falling edge, this starts the data byte
207 Uart.posCnt = 0;
208 Uart.bitCnt = 0;
209 Uart.shiftReg = 0;
210 Uart.state = STATE_RECEIVING_DATA;
211 LED_A_ON(); // Indicate we're receiving
212 }
213 break;
214
215 case STATE_RECEIVING_DATA:
216 Uart.posCnt++;
217 if(Uart.posCnt == 2) {
218 // time to sample a bit
219 Uart.shiftReg >>= 1;
220 if(bit) {
221 Uart.shiftReg |= 0x200;
222 }
223 Uart.bitCnt++;
224 }
225 if(Uart.posCnt >= 4) {
226 Uart.posCnt = 0;
227 }
228 if(Uart.bitCnt == 10) {
229 if((Uart.shiftReg & 0x200) && !(Uart.shiftReg & 0x001))
230 {
231 // this is a data byte, with correct
232 // start and stop bits
233 Uart.output[Uart.byteCnt] = (Uart.shiftReg >> 1) & 0xff;
234 Uart.byteCnt++;
235
236 if(Uart.byteCnt >= Uart.byteCntMax) {
237 // Buffer overflowed, give up
238 Uart.posCnt = 0;
239 Uart.state = STATE_ERROR_WAIT;
240 } else {
241 // so get the next byte now
242 Uart.posCnt = 0;
243 Uart.state = STATE_AWAITING_START_BIT;
244 }
245 } else if(Uart.shiftReg == 0x000) {
246 // this is an EOF byte
247 LED_A_OFF(); // Finished receiving
248 return TRUE;
249 } else {
250 // this is an error
251 Uart.posCnt = 0;
252 Uart.state = STATE_ERROR_WAIT;
253 }
254 }
255 break;
256
257 case STATE_ERROR_WAIT:
258 // We're all screwed up, so wait a little while
259 // for whatever went wrong to finish, and then
260 // start over.
261 Uart.posCnt++;
262 if(Uart.posCnt > 10) {
263 Uart.state = STATE_UNSYNCD;
264 }
265 break;
266
267 default:
268 Uart.state = STATE_UNSYNCD;
269 break;
270 }
271
272 // This row make the error blew circular buffer in hf 14b snoop
273 //if (Uart.state == STATE_ERROR_WAIT) LED_A_OFF(); // Error
274
275 return FALSE;
276}
277
278//-----------------------------------------------------------------------------
279// Receive a command (from the reader to us, where we are the simulated tag),
280// and store it in the given buffer, up to the given maximum length. Keeps
281// spinning, waiting for a well-framed command, until either we get one
282// (returns TRUE) or someone presses the pushbutton on the board (FALSE).
283//
284// Assume that we're called with the SSC (to the FPGA) and ADC path set
285// correctly.
286//-----------------------------------------------------------------------------
287static int GetIso14443CommandFromReader(uint8_t *received, int *len, int maxLen)
288{
289 uint8_t mask;
290 int i, bit;
291
292 // Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen
293 // only, since we are receiving, not transmitting).
294 // Signal field is off with the appropriate LED
295 LED_D_OFF();
296 FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_NO_MODULATION);
297
298
299 // Now run a `software UART' on the stream of incoming samples.
300 Uart.output = received;
301 Uart.byteCntMax = maxLen;
302 Uart.state = STATE_UNSYNCD;
303
304 for(;;) {
305 WDT_HIT();
306
307 if(BUTTON_PRESS()) return FALSE;
308
309 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
310 AT91C_BASE_SSC->SSC_THR = 0x00;
311 }
312 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
313 uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
314
315 mask = 0x80;
316 for(i = 0; i < 8; i++, mask >>= 1) {
317 bit = (b & mask);
318 if(Handle14443UartBit(bit)) {
319 *len = Uart.byteCnt;
320 return TRUE;
321 }
322 }
323 }
324 }
325}
326
327//-----------------------------------------------------------------------------
328// Main loop of simulated tag: receive commands from reader, decide what
329// response to send, and send it.
330//-----------------------------------------------------------------------------
331void SimulateIso14443Tag(void)
332{
333 static const uint8_t cmd1[] = { 0x05, 0x00, 0x08, 0x39, 0x73 };
334 static const uint8_t response1[] = {
335 0x50, 0x82, 0x0d, 0xe1, 0x74, 0x20, 0x38, 0x19, 0x22,
336 0x00, 0x21, 0x85, 0x5e, 0xd7
337 };
338
339 uint8_t *resp;
340 int respLen;
341
342 uint8_t *resp1 = BigBuf_get_addr() + 800;
343 int resp1Len;
344
345 uint8_t *receivedCmd = BigBuf_get_addr();
346 int len;
347
348 int i;
349
350 int cmdsRecvd = 0;
351
352 FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
353 memset(receivedCmd, 0x44, 400);
354
355 CodeIso14443bAsTag(response1, sizeof(response1));
356 memcpy(resp1, ToSend, ToSendMax); resp1Len = ToSendMax;
357
358 // We need to listen to the high-frequency, peak-detected path.
359 SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
360 FpgaSetupSsc();
361
362 cmdsRecvd = 0;
363
364 for(;;) {
365 uint8_t b1, b2;
366
367 if(!GetIso14443CommandFromReader(receivedCmd, &len, 100)) {
368 Dbprintf("button pressed, received %d commands", cmdsRecvd);
369 break;
370 }
371
372 // Good, look at the command now.
373
374 if(len == sizeof(cmd1) && memcmp(receivedCmd, cmd1, len)==0) {
375 resp = resp1; respLen = resp1Len;
376 } else {
377 Dbprintf("new cmd from reader: len=%d, cmdsRecvd=%d", len, cmdsRecvd);
378 // And print whether the CRC fails, just for good measure
379 ComputeCrc14443(CRC_14443_B, receivedCmd, len-2, &b1, &b2);
380 if(b1 != receivedCmd[len-2] || b2 != receivedCmd[len-1]) {
381 // Not so good, try again.
382 DbpString("+++CRC fail");
383 } else {
384 DbpString("CRC passes");
385 }
386 break;
387 }
388
389 memset(receivedCmd, 0x44, 32);
390
391 cmdsRecvd++;
392
393 if(cmdsRecvd > 0x30) {
394 DbpString("many commands later...");
395 break;
396 }
397
398 if(respLen <= 0) continue;
399
400 // Modulate BPSK
401 // Signal field is off with the appropriate LED
402 LED_D_OFF();
403 FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_BPSK);
404 AT91C_BASE_SSC->SSC_THR = 0xff;
405 FpgaSetupSsc();
406
407 // Transmit the response.
408 i = 0;
409 for(;;) {
410 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
411 uint8_t b = resp[i];
412
413 AT91C_BASE_SSC->SSC_THR = b;
414
415 i++;
416 if(i > respLen) {
417 break;
418 }
419 }
420 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
421 volatile uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
422 (void)b;
423 }
424 }
425 }
426}
427
428//=============================================================================
429// An ISO 14443 Type B reader. We take layer two commands, code them
430// appropriately, and then send them to the tag. We then listen for the
431// tag's response, which we leave in the buffer to be demodulated on the
432// PC side.
433//=============================================================================
434
435static struct {
436 enum {
437 DEMOD_UNSYNCD,
438 DEMOD_PHASE_REF_TRAINING,
439 DEMOD_AWAITING_FALLING_EDGE_OF_SOF,
440 DEMOD_GOT_FALLING_EDGE_OF_SOF,
441 DEMOD_AWAITING_START_BIT,
442 DEMOD_RECEIVING_DATA,
443 DEMOD_ERROR_WAIT
444 } state;
445 int bitCount;
446 int posCount;
447 int thisBit;
448 int metric;
449 int metricN;
450 uint16_t shiftReg;
451 uint8_t *output;
452 int len;
453 int sumI;
454 int sumQ;
455} Demod;
456
457/*
458 * Handles reception of a bit from the tag
459 *
460 * LED handling:
461 * LED C -> ON once we have received the SOF and are expecting the rest.
462 * LED C -> OFF once we have received EOF or are unsynced
463 *
464 * Returns: true if we received a EOF
465 * false if we are still waiting for some more
466 *
467 */
468static RAMFUNC int Handle14443SamplesDemod(int ci, int cq)
469{
470 int v;
471
472 // The soft decision on the bit uses an estimate of just the
473 // quadrant of the reference angle, not the exact angle.
474#define MAKE_SOFT_DECISION() { \
475 if(Demod.sumI > 0) { \
476 v = ci; \
477 } else { \
478 v = -ci; \
479 } \
480 if(Demod.sumQ > 0) { \
481 v += cq; \
482 } else { \
483 v -= cq; \
484 } \
485 }
486
487 switch(Demod.state) {
488 case DEMOD_UNSYNCD:
489 v = ci;
490 if(v < 0) v = -v;
491 if(cq > 0) {
492 v += cq;
493 } else {
494 v -= cq;
495 }
496 if(v > 40) {
497 Demod.posCount = 0;
498 Demod.state = DEMOD_PHASE_REF_TRAINING;
499 Demod.sumI = 0;
500 Demod.sumQ = 0;
501 }
502 break;
503
504 case DEMOD_PHASE_REF_TRAINING:
505 if(Demod.posCount < 8) {
506 Demod.sumI += ci;
507 Demod.sumQ += cq;
508 } else if(Demod.posCount > 100) {
509 // error, waited too long
510 Demod.state = DEMOD_UNSYNCD;
511 } else {
512 MAKE_SOFT_DECISION();
513 if(v < 0) {
514 Demod.state = DEMOD_AWAITING_FALLING_EDGE_OF_SOF;
515 Demod.posCount = 0;
516 }
517 }
518 Demod.posCount++;
519 break;
520
521 case DEMOD_AWAITING_FALLING_EDGE_OF_SOF:
522 MAKE_SOFT_DECISION();
523 if(v < 0) {
524 Demod.state = DEMOD_GOT_FALLING_EDGE_OF_SOF;
525 Demod.posCount = 0;
526 } else {
527 if(Demod.posCount > 100) {
528 Demod.state = DEMOD_UNSYNCD;
529 }
530 }
531 Demod.posCount++;
532 break;
533
534 case DEMOD_GOT_FALLING_EDGE_OF_SOF:
535 MAKE_SOFT_DECISION();
536 if(v > 0) {
537 if(Demod.posCount < 12) {
538 Demod.state = DEMOD_UNSYNCD;
539 } else {
540 LED_C_ON(); // Got SOF
541 Demod.state = DEMOD_AWAITING_START_BIT;
542 Demod.posCount = 0;
543 Demod.len = 0;
544 Demod.metricN = 0;
545 Demod.metric = 0;
546 }
547 } else {
548 if(Demod.posCount > 100) {
549 Demod.state = DEMOD_UNSYNCD;
550 }
551 }
552 Demod.posCount++;
553 break;
554
555 case DEMOD_AWAITING_START_BIT:
556 MAKE_SOFT_DECISION();
557 if(v > 0) {
558 if(Demod.posCount > 10) {
559 Demod.state = DEMOD_UNSYNCD;
560 }
561 } else {
562 Demod.bitCount = 0;
563 Demod.posCount = 1;
564 Demod.thisBit = v;
565 Demod.shiftReg = 0;
566 Demod.state = DEMOD_RECEIVING_DATA;
567 }
568 break;
569
570 case DEMOD_RECEIVING_DATA:
571 MAKE_SOFT_DECISION();
572 if(Demod.posCount == 0) {
573 Demod.thisBit = v;
574 Demod.posCount = 1;
575 } else {
576 Demod.thisBit += v;
577
578 if(Demod.thisBit > 0) {
579 Demod.metric += Demod.thisBit;
580 } else {
581 Demod.metric -= Demod.thisBit;
582 }
583 (Demod.metricN)++;
584
585 Demod.shiftReg >>= 1;
586 if(Demod.thisBit > 0) {
587 Demod.shiftReg |= 0x200;
588 }
589
590 Demod.bitCount++;
591 if(Demod.bitCount == 10) {
592 uint16_t s = Demod.shiftReg;
593 if((s & 0x200) && !(s & 0x001)) {
594 uint8_t b = (s >> 1);
595 Demod.output[Demod.len] = b;
596 Demod.len++;
597 Demod.state = DEMOD_AWAITING_START_BIT;
598 } else if(s == 0x000) {
599 // This is EOF
600 LED_C_OFF();
601 Demod.state = DEMOD_UNSYNCD;
602 return TRUE;
603 } else {
604 Demod.state = DEMOD_UNSYNCD;
605 }
606 }
607 Demod.posCount = 0;
608 }
609 break;
610
611 default:
612 Demod.state = DEMOD_UNSYNCD;
613 break;
614 }
615
616 if (Demod.state == DEMOD_UNSYNCD) LED_C_OFF(); // Not synchronized...
617 return FALSE;
618}
619
620/*
621 * Demodulate the samples we received from the tag
622 * weTx: set to 'TRUE' if we behave like a reader
623 * set to 'FALSE' if we behave like a snooper
624 * quiet: set to 'TRUE' to disable debug output
625 */
626static void GetSamplesFor14443Demod(int weTx, int n, int quiet)
627{
628 int max = 0;
629 int gotFrame = FALSE;
630
631//# define DMA_BUFFER_SIZE 8
632 uint8_t *dmaBuf;
633
634 int lastRxCounter;
635 uint8_t *upTo;
636
637 int ci, cq;
638
639 int samples = 0;
640
641 // Clear out the state of the "UART" that receives from the tag.
642 uint8_t *BigBuf = BigBuf_get_addr();
643 memset(BigBuf, 0x00, 400);
644 Demod.output = BigBuf;
645 Demod.len = 0;
646 Demod.state = DEMOD_UNSYNCD;
647
648 // And the UART that receives from the reader
649 Uart.output = BigBuf + 1024;
650 Uart.byteCntMax = 100;
651 Uart.state = STATE_UNSYNCD;
652
653 // Setup for the DMA.
654 dmaBuf = BigBuf + 32;
655 upTo = dmaBuf;
656 lastRxCounter = DEMOD_DMA_BUFFER_SIZE;
657 FpgaSetupSscDma(dmaBuf, DEMOD_DMA_BUFFER_SIZE);
658
659 // Signal field is ON with the appropriate LED:
660 if (weTx) LED_D_ON(); else LED_D_OFF();
661 // And put the FPGA in the appropriate mode
662 FpgaWriteConfWord(
663 FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ |
664 (weTx ? 0 : FPGA_HF_READER_RX_XCORR_SNOOP));
665
666 for(;;) {
667 int behindBy = lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR;
668 if(behindBy > max) max = behindBy;
669
670 while(((lastRxCounter-AT91C_BASE_PDC_SSC->PDC_RCR) & (DEMOD_DMA_BUFFER_SIZE-1))
671 > 2)
672 {
673 ci = upTo[0];
674 cq = upTo[1];
675 upTo += 2;
676 if(upTo - dmaBuf > DEMOD_DMA_BUFFER_SIZE) {
677 upTo -= DEMOD_DMA_BUFFER_SIZE;
678 AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) upTo;
679 AT91C_BASE_PDC_SSC->PDC_RNCR = DEMOD_DMA_BUFFER_SIZE;
680 }
681 lastRxCounter -= 2;
682 if(lastRxCounter <= 0) {
683 lastRxCounter += DEMOD_DMA_BUFFER_SIZE;
684 }
685
686 samples += 2;
687
688 Handle14443UartBit(1);
689 Handle14443UartBit(1);
690
691 if(Handle14443SamplesDemod(ci, cq)) {
692 gotFrame = 1;
693 }
694 }
695
696 if(samples > 2000) {
697 break;
698 }
699 }
700 AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;
701 if (!quiet) Dbprintf("%x %x %x", max, gotFrame, Demod.len);
702}
703
704//-----------------------------------------------------------------------------
705// Read the tag's response. We just receive a stream of slightly-processed
706// samples from the FPGA, which we will later do some signal processing on,
707// to get the bits.
708//-----------------------------------------------------------------------------
709/*static void GetSamplesFor14443(int weTx, int n)
710{
711 uint8_t *dest = (uint8_t *)BigBuf;
712 int c;
713
714 FpgaWriteConfWord(
715 FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ |
716 (weTx ? 0 : FPGA_HF_READER_RX_XCORR_SNOOP));
717
718 c = 0;
719 for(;;) {
720 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
721 AT91C_BASE_SSC->SSC_THR = 0x43;
722 }
723 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
724 int8_t b;
725 b = (int8_t)AT91C_BASE_SSC->SSC_RHR;
726
727 dest[c++] = (uint8_t)b;
728
729 if(c >= n) {
730 break;
731 }
732 }
733 }
734}*/
735
736//-----------------------------------------------------------------------------
737// Transmit the command (to the tag) that was placed in ToSend[].
738//-----------------------------------------------------------------------------
739static void TransmitFor14443(void)
740{
741 int c;
742
743 FpgaSetupSsc();
744
745 while(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
746 AT91C_BASE_SSC->SSC_THR = 0xff;
747 }
748
749 // Signal field is ON with the appropriate Red LED
750 LED_D_ON();
751 // Signal we are transmitting with the Green LED
752 LED_B_ON();
753 FpgaWriteConfWord(
754 FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD);
755
756 for(c = 0; c < 10;) {
757 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
758 AT91C_BASE_SSC->SSC_THR = 0xff;
759 c++;
760 }
761 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
762 volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
763 (void)r;
764 }
765 WDT_HIT();
766 }
767
768 c = 0;
769 for(;;) {
770 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
771 AT91C_BASE_SSC->SSC_THR = ToSend[c];
772 c++;
773 if(c >= ToSendMax) {
774 break;
775 }
776 }
777 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
778 volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
779 (void)r;
780 }
781 WDT_HIT();
782 }
783 LED_B_OFF(); // Finished sending
784}
785
786//-----------------------------------------------------------------------------
787// Code a layer 2 command (string of octets, including CRC) into ToSend[],
788// so that it is ready to transmit to the tag using TransmitFor14443().
789//-----------------------------------------------------------------------------
790static void CodeIso14443bAsReader(const uint8_t *cmd, int len)
791{
792 int i, j;
793 uint8_t b;
794
795 ToSendReset();
796
797 // Establish initial reference level
798 for(i = 0; i < 40; i++) {
799 ToSendStuffBit(1);
800 }
801 // Send SOF
802 for(i = 0; i < 10; i++) {
803 ToSendStuffBit(0);
804 }
805
806 for(i = 0; i < len; i++) {
807 // Stop bits/EGT
808 ToSendStuffBit(1);
809 ToSendStuffBit(1);
810 // Start bit
811 ToSendStuffBit(0);
812 // Data bits
813 b = cmd[i];
814 for(j = 0; j < 8; j++) {
815 if(b & 1) {
816 ToSendStuffBit(1);
817 } else {
818 ToSendStuffBit(0);
819 }
820 b >>= 1;
821 }
822 }
823 // Send EOF
824 ToSendStuffBit(1);
825 for(i = 0; i < 10; i++) {
826 ToSendStuffBit(0);
827 }
828 for(i = 0; i < 8; i++) {
829 ToSendStuffBit(1);
830 }
831
832 // And then a little more, to make sure that the last character makes
833 // it out before we switch to rx mode.
834 for(i = 0; i < 24; i++) {
835 ToSendStuffBit(1);
836 }
837
838 // Convert from last character reference to length
839 ToSendMax++;
840}
841
842//-----------------------------------------------------------------------------
843// Read an ISO 14443 tag. We send it some set of commands, and record the
844// responses.
845// The command name is misleading, it actually decodes the reponse in HEX
846// into the output buffer (read the result using hexsamples, not hisamples)
847//
848// obsolete function only for test
849//-----------------------------------------------------------------------------
850void AcquireRawAdcSamplesIso14443(uint32_t parameter)
851{
852 uint8_t cmd1[] = { 0x05, 0x00, 0x08, 0x39, 0x73 };
853
854 SendRawCommand14443B(sizeof(cmd1),1,1,cmd1);
855}
856
857//-----------------------------------------------------------------------------
858// Read a SRI512 ISO 14443 tag.
859//
860// SRI512 tags are just simple memory tags, here we're looking at making a dump
861// of the contents of the memory. No anticollision algorithm is done, we assume
862// we have a single tag in the field.
863//
864// I tried to be systematic and check every answer of the tag, every CRC, etc...
865//-----------------------------------------------------------------------------
866void ReadSTMemoryIso14443(uint32_t dwLast)
867{
868 uint8_t i = 0x00;
869
870 FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
871 // Make sure that we start from off, since the tags are stateful;
872 // confusing things will happen if we don't reset them between reads.
873 LED_D_OFF();
874 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
875 SpinDelay(200);
876
877 SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
878 FpgaSetupSsc();
879
880 // Now give it time to spin up.
881 // Signal field is on with the appropriate LED
882 LED_D_ON();
883 FpgaWriteConfWord(
884 FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ);
885 SpinDelay(200);
886
887 // First command: wake up the tag using the INITIATE command
888 uint8_t cmd1[] = { 0x06, 0x00, 0x97, 0x5b};
889 CodeIso14443bAsReader(cmd1, sizeof(cmd1));
890 TransmitFor14443();
891// LED_A_ON();
892 GetSamplesFor14443Demod(TRUE, 2000,TRUE);
893// LED_A_OFF();
894
895 if (Demod.len == 0) {
896 DbpString("No response from tag");
897 return;
898 } else {
899 Dbprintf("Randomly generated UID from tag (+ 2 byte CRC): %x %x %x",
900 Demod.output[0], Demod.output[1],Demod.output[2]);
901 }
902 // There is a response, SELECT the uid
903 DbpString("Now SELECT tag:");
904 cmd1[0] = 0x0E; // 0x0E is SELECT
905 cmd1[1] = Demod.output[0];
906 ComputeCrc14443(CRC_14443_B, cmd1, 2, &cmd1[2], &cmd1[3]);
907 CodeIso14443bAsReader(cmd1, sizeof(cmd1));
908 TransmitFor14443();
909// LED_A_ON();
910 GetSamplesFor14443Demod(TRUE, 2000,TRUE);
911// LED_A_OFF();
912 if (Demod.len != 3) {
913 Dbprintf("Expected 3 bytes from tag, got %d", Demod.len);
914 return;
915 }
916 // Check the CRC of the answer:
917 ComputeCrc14443(CRC_14443_B, Demod.output, 1 , &cmd1[2], &cmd1[3]);
918 if(cmd1[2] != Demod.output[1] || cmd1[3] != Demod.output[2]) {
919 DbpString("CRC Error reading select response.");
920 return;
921 }
922 // Check response from the tag: should be the same UID as the command we just sent:
923 if (cmd1[1] != Demod.output[0]) {
924 Dbprintf("Bad response to SELECT from Tag, aborting: %x %x", cmd1[1], Demod.output[0]);
925 return;
926 }
927 // Tag is now selected,
928 // First get the tag's UID:
929 cmd1[0] = 0x0B;
930 ComputeCrc14443(CRC_14443_B, cmd1, 1 , &cmd1[1], &cmd1[2]);
931 CodeIso14443bAsReader(cmd1, 3); // Only first three bytes for this one
932 TransmitFor14443();
933// LED_A_ON();
934 GetSamplesFor14443Demod(TRUE, 2000,TRUE);
935// LED_A_OFF();
936 if (Demod.len != 10) {
937 Dbprintf("Expected 10 bytes from tag, got %d", Demod.len);
938 return;
939 }
940 // The check the CRC of the answer (use cmd1 as temporary variable):
941 ComputeCrc14443(CRC_14443_B, Demod.output, 8, &cmd1[2], &cmd1[3]);
942 if(cmd1[2] != Demod.output[8] || cmd1[3] != Demod.output[9]) {
943 Dbprintf("CRC Error reading block! - Below: expected, got %x %x",
944 (cmd1[2]<<8)+cmd1[3], (Demod.output[8]<<8)+Demod.output[9]);
945 // Do not return;, let's go on... (we should retry, maybe ?)
946 }
947 Dbprintf("Tag UID (64 bits): %08x %08x",
948 (Demod.output[7]<<24) + (Demod.output[6]<<16) + (Demod.output[5]<<8) + Demod.output[4],
949 (Demod.output[3]<<24) + (Demod.output[2]<<16) + (Demod.output[1]<<8) + Demod.output[0]);
950
951 // Now loop to read all 16 blocks, address from 0 to last block
952 Dbprintf("Tag memory dump, block 0 to %d",dwLast);
953 cmd1[0] = 0x08;
954 i = 0x00;
955 dwLast++;
956 for (;;) {
957 if (i == dwLast) {
958 DbpString("System area block (0xff):");
959 i = 0xff;
960 }
961 cmd1[1] = i;
962 ComputeCrc14443(CRC_14443_B, cmd1, 2, &cmd1[2], &cmd1[3]);
963 CodeIso14443bAsReader(cmd1, sizeof(cmd1));
964 TransmitFor14443();
965// LED_A_ON();
966 GetSamplesFor14443Demod(TRUE, 2000,TRUE);
967// LED_A_OFF();
968 if (Demod.len != 6) { // Check if we got an answer from the tag
969 DbpString("Expected 6 bytes from tag, got less...");
970 return;
971 }
972 // The check the CRC of the answer (use cmd1 as temporary variable):
973 ComputeCrc14443(CRC_14443_B, Demod.output, 4, &cmd1[2], &cmd1[3]);
974 if(cmd1[2] != Demod.output[4] || cmd1[3] != Demod.output[5]) {
975 Dbprintf("CRC Error reading block! - Below: expected, got %x %x",
976 (cmd1[2]<<8)+cmd1[3], (Demod.output[4]<<8)+Demod.output[5]);
977 // Do not return;, let's go on... (we should retry, maybe ?)
978 }
979 // Now print out the memory location:
980 Dbprintf("Address=%x, Contents=%x, CRC=%x", i,
981 (Demod.output[3]<<24) + (Demod.output[2]<<16) + (Demod.output[1]<<8) + Demod.output[0],
982 (Demod.output[4]<<8)+Demod.output[5]);
983 if (i == 0xff) {
984 break;
985 }
986 i++;
987 }
988}
989
990
991//=============================================================================
992// Finally, the `sniffer' combines elements from both the reader and
993// simulated tag, to show both sides of the conversation.
994//=============================================================================
995
996//-----------------------------------------------------------------------------
997// Record the sequence of commands sent by the reader to the tag, with
998// triggering so that we start recording at the point that the tag is moved
999// near the reader.
1000//-----------------------------------------------------------------------------
1001/*
1002 * Memory usage for this function, (within BigBuf)
1003 * 0-4095 : Demodulated samples receive (4096 bytes) - DEMOD_TRACE_SIZE
1004 * 4096-6143 : Last Received command, 2048 bytes (reader->tag) - READER_TAG_BUFFER_SIZE
1005 * 6144-8191 : Last Received command, 2048 bytes(tag->reader) - TAG_READER_BUFFER_SIZE
1006 * 8192-9215 : DMA Buffer, 1024 bytes (samples) - DEMOD_DMA_BUFFER_SIZE
1007 */
1008void RAMFUNC SnoopIso14443(void)
1009{
1010 // We won't start recording the frames that we acquire until we trigger;
1011 // a good trigger condition to get started is probably when we see a
1012 // response from the tag.
1013 int triggered = TRUE;
1014
1015 FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
1016 BigBuf_free();
1017 // The command (reader -> tag) that we're working on receiving.
1018 uint8_t *receivedCmd = BigBuf_malloc(READER_TAG_BUFFER_SIZE);
1019 // The response (tag -> reader) that we're working on receiving.
1020 uint8_t *receivedResponse = BigBuf_malloc(TAG_READER_BUFFER_SIZE);
1021
1022 // As we receive stuff, we copy it from receivedCmd or receivedResponse
1023 // into trace, along with its length and other annotations.
1024 uint8_t *trace = BigBuf_get_addr();
1025 traceLen = 0;
1026
1027 // The DMA buffer, used to stream samples from the FPGA.
1028 uint8_t *dmaBuf = BigBuf_malloc(DEMOD_DMA_BUFFER_SIZE);
1029 int lastRxCounter;
1030 uint8_t *upTo;
1031 int ci, cq;
1032 int maxBehindBy = 0;
1033
1034 // Count of samples received so far, so that we can include timing
1035 // information in the trace buffer.
1036 int samples = 0;
1037
1038 // Initialize the trace buffer
1039 memset(trace, 0x44, BigBuf_max_traceLen());
1040
1041 // Set up the demodulator for tag -> reader responses.
1042 Demod.output = receivedResponse;
1043 Demod.len = 0;
1044 Demod.state = DEMOD_UNSYNCD;
1045
1046 // And the reader -> tag commands
1047 memset(&Uart, 0, sizeof(Uart));
1048 Uart.output = receivedCmd;
1049 Uart.byteCntMax = 100;
1050 Uart.state = STATE_UNSYNCD;
1051
1052 // Print some debug information about the buffer sizes
1053 Dbprintf("Snooping buffers initialized:");
1054 Dbprintf(" Trace: %i bytes", BigBuf_max_traceLen());
1055 Dbprintf(" Reader -> tag: %i bytes", READER_TAG_BUFFER_SIZE);
1056 Dbprintf(" tag -> Reader: %i bytes", TAG_READER_BUFFER_SIZE);
1057 Dbprintf(" DMA: %i bytes", DEMOD_DMA_BUFFER_SIZE);
1058
1059 // And put the FPGA in the appropriate mode
1060 // Signal field is off with the appropriate LED
1061 LED_D_OFF();
1062 FpgaWriteConfWord(
1063 FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ |
1064 FPGA_HF_READER_RX_XCORR_SNOOP);
1065 SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
1066
1067 // Setup for the DMA.
1068 FpgaSetupSsc();
1069 upTo = dmaBuf;
1070 lastRxCounter = DEMOD_DMA_BUFFER_SIZE;
1071 FpgaSetupSscDma((uint8_t *)dmaBuf, DEMOD_DMA_BUFFER_SIZE);
1072
1073 LED_A_ON();
1074
1075 // And now we loop, receiving samples.
1076 for(;;) {
1077 int behindBy = (lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR) &
1078 (DEMOD_DMA_BUFFER_SIZE-1);
1079 if(behindBy > maxBehindBy) {
1080 maxBehindBy = behindBy;
1081 if(behindBy > (9*DEMOD_DMA_BUFFER_SIZE/10)) { // TODO: understand whether we can increase/decrease as we want or not?
1082 Dbprintf("blew circular buffer! behindBy=0x%x", behindBy);
1083 goto done;
1084 }
1085 }
1086 if(behindBy < 2) continue;
1087
1088 ci = upTo[0];
1089 cq = upTo[1];
1090 upTo += 2;
1091 lastRxCounter -= 2;
1092 if(upTo - dmaBuf > DEMOD_DMA_BUFFER_SIZE) {
1093 upTo -= DEMOD_DMA_BUFFER_SIZE;
1094 lastRxCounter += DEMOD_DMA_BUFFER_SIZE;
1095 AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) upTo;
1096 AT91C_BASE_PDC_SSC->PDC_RNCR = DEMOD_DMA_BUFFER_SIZE;
1097 }
1098
1099 samples += 2;
1100
1101#define HANDLE_BIT_IF_BODY \
1102 if(triggered) { \
1103 trace[traceLen++] = ((samples >> 0) & 0xff); \
1104 trace[traceLen++] = ((samples >> 8) & 0xff); \
1105 trace[traceLen++] = ((samples >> 16) & 0xff); \
1106 trace[traceLen++] = ((samples >> 24) & 0xff); \
1107 trace[traceLen++] = 0; \
1108 trace[traceLen++] = 0; \
1109 trace[traceLen++] = 0; \
1110 trace[traceLen++] = 0; \
1111 trace[traceLen++] = Uart.byteCnt; \
1112 memcpy(trace+traceLen, receivedCmd, Uart.byteCnt); \
1113 traceLen += Uart.byteCnt; \
1114 if(traceLen > 1000) break; \
1115 } \
1116 /* And ready to receive another command. */ \
1117 memset(&Uart, 0, sizeof(Uart)); \
1118 Uart.output = receivedCmd; \
1119 Uart.byteCntMax = 100; \
1120 Uart.state = STATE_UNSYNCD; \
1121 /* And also reset the demod code, which might have been */ \
1122 /* false-triggered by the commands from the reader. */ \
1123 memset(&Demod, 0, sizeof(Demod)); \
1124 Demod.output = receivedResponse; \
1125 Demod.state = DEMOD_UNSYNCD; \
1126
1127 if(Handle14443UartBit(ci & 1)) {
1128 HANDLE_BIT_IF_BODY
1129 }
1130 if(Handle14443UartBit(cq & 1)) {
1131 HANDLE_BIT_IF_BODY
1132 }
1133
1134 if(Handle14443SamplesDemod(ci, cq)) {
1135 // timestamp, as a count of samples
1136 trace[traceLen++] = ((samples >> 0) & 0xff);
1137 trace[traceLen++] = ((samples >> 8) & 0xff);
1138 trace[traceLen++] = ((samples >> 16) & 0xff);
1139 trace[traceLen++] = 0x80 | ((samples >> 24) & 0xff);
1140 // correlation metric (~signal strength estimate)
1141 if(Demod.metricN != 0) {
1142 Demod.metric /= Demod.metricN;
1143 }
1144 trace[traceLen++] = ((Demod.metric >> 0) & 0xff);
1145 trace[traceLen++] = ((Demod.metric >> 8) & 0xff);
1146 trace[traceLen++] = ((Demod.metric >> 16) & 0xff);
1147 trace[traceLen++] = ((Demod.metric >> 24) & 0xff);
1148 // length
1149 trace[traceLen++] = Demod.len;
1150 memcpy(trace+traceLen, receivedResponse, Demod.len);
1151 traceLen += Demod.len;
1152 if(traceLen > BigBuf_max_traceLen()) {
1153 DbpString("Reached trace limit");
1154 goto done;
1155 }
1156
1157 triggered = TRUE;
1158 LED_A_OFF();
1159 LED_B_ON();
1160
1161 // And ready to receive another response.
1162 memset(&Demod, 0, sizeof(Demod));
1163 Demod.output = receivedResponse;
1164 Demod.state = DEMOD_UNSYNCD;
1165 }
1166 WDT_HIT();
1167
1168 if(BUTTON_PRESS()) {
1169 DbpString("cancelled");
1170 goto done;
1171 }
1172 }
1173
1174done:
1175 LED_A_OFF();
1176 LED_B_OFF();
1177 LED_C_OFF();
1178 AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;
1179 DbpString("Snoop statistics:");
1180 Dbprintf(" Max behind by: %i", maxBehindBy);
1181 Dbprintf(" Uart State: %x", Uart.state);
1182 Dbprintf(" Uart ByteCnt: %i", Uart.byteCnt);
1183 Dbprintf(" Uart ByteCntMax: %i", Uart.byteCntMax);
1184 Dbprintf(" Trace length: %i", traceLen);
1185}
1186
1187/*
1188 * Send raw command to tag ISO14443B
1189 * @Input
1190 * datalen len of buffer data
1191 * recv bool when true wait for data from tag and send to client
1192 * powerfield bool leave the field on when true
1193 * data buffer with byte to send
1194 *
1195 * @Output
1196 * none
1197 *
1198 */
1199
1200void SendRawCommand14443B(uint32_t datalen, uint32_t recv,uint8_t powerfield, uint8_t data[])
1201{
1202 FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
1203 if(!powerfield)
1204 {
1205 // Make sure that we start from off, since the tags are stateful;
1206 // confusing things will happen if we don't reset them between reads.
1207 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1208 LED_D_OFF();
1209 SpinDelay(200);
1210 }
1211
1212 if(!GETBIT(GPIO_LED_D))
1213 {
1214 SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
1215 FpgaSetupSsc();
1216
1217 // Now give it time to spin up.
1218 // Signal field is on with the appropriate LED
1219 LED_D_ON();
1220 FpgaWriteConfWord(
1221 FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ);
1222 SpinDelay(200);
1223 }
1224
1225 CodeIso14443bAsReader(data, datalen);
1226 TransmitFor14443();
1227 if(recv)
1228 {
1229 uint16_t iLen = MIN(Demod.len,USB_CMD_DATA_SIZE);
1230 GetSamplesFor14443Demod(TRUE, 2000, TRUE);
1231 cmd_send(CMD_ACK,iLen,0,0,Demod.output,iLen);
1232 }
1233 if(!powerfield)
1234 {
1235 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1236 LED_D_OFF();
1237 }
1238}
1239
Impressum, Datenschutz