git.zerfleddert.de Git - proxmark3-svn/blob - common/protocols.h

   1 #ifndef PROTOCOLS_H
   2 #define PROTOCOLS_H
   3
   4 //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
   5 /*
   6 ISO14443A (usually NFC tags)
   7         26 (7bits) = REQA
   8         30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
   9         A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
  10         52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
  11         93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
  12         93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
  13         95 20 = Anticollision of cascade level2
  14         95 70 = Select of cascade level2
  15         50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
  16 Mifare
  17         60 = Authenticate with KeyA
  18         61 = Authenticate with KeyB
  19         40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
  20         C0 = Decrement
  21         C1 = Increment
  22         C2 = Restore
  23         B0 = Transfer
  24 Ultralight C
  25         A0 = Compatibility Write (to accomodate MIFARE commands)
  26         1A = Step1 Authenticate
  27         AF = Step2 Authenticate
  28
  29
  30 ISO14443B
  31         05 = REQB
  32         1D = ATTRIB
  33         50 = HALT
  34 SRIX4K (tag does not respond to 05)
  35         06 00 = INITIATE
  36         0E xx = SELECT ID (xx = Chip-ID)
  37         0B = Get UID
  38         08 yy = Read Block (yy = block number)
  39         09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
  40         0C = Reset to Inventory
  41         0F = Completion
  42         0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
  43
  44
  45 ISO15693
  46         MANDATORY COMMANDS (all ISO15693 tags must support those)
  47                 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
  48                 02 = Stay Quiet
  49         OPTIONAL COMMANDS (not all tags support them)
  50                 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
  51                 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
  52                 22 = Lock Block
  53                 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
  54                 25 = Select
  55                 26 = Reset to Ready
  56                 27 = Write AFI
  57                 28 = Lock AFI
  58                 29 = Write DSFID
  59                 2A = Lock DSFID
  60                 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
  61                 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)
  62
  63 EM Microelectronic CUSTOM COMMANDS
  64         A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
  65         A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
  66         B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
  67         E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
  68 NXP/Philips CUSTOM COMMANDS
  69         A0 = Inventory Read
  70         A1 = Fast Inventory Read
  71         A2 = Set EAS
  72         A3 = Reset EAS
  73         A4 = Lock EAS
  74         A5 = EAS Alarm
  75         A6 = Password Protect EAS
  76         A7 = Write EAS ID
  77         A8 = Read EPC
  78         B0 = Inventory Page Read
  79         B1 = Fast Inventory Page Read
  80         B2 = Get Random Number
  81         B3 = Set Password
  82         B4 = Write Password
  83         B5 = Lock Password
  84         B6 = Bit Password Protection
  85         B7 = Lock Page Protection Condition
  86         B8 = Get Multiple Block Protection Status
  87         B9 = Destroy SLI
  88         BA = Enable Privacy
  89         BB = 64bit Password Protection
  90         40 = Long Range CMD (Standard ISO/TR7003:1990)
  91                 */
  92
  93 #define ICLASS_CMD_ACTALL           0x0A
  94 #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
  95 #define ICLASS_CMD_SELECT           0x81
  96 #define ICLASS_CMD_PAGESEL          0x84
  97 #define ICLASS_CMD_READCHECK_KD     0x88
  98 #define ICLASS_CMD_READCHECK_KC     0x18
  99 #define ICLASS_CMD_CHECK            0x05
 100 #define ICLASS_CMD_DETECT           0x0F
 101 #define ICLASS_CMD_HALT             0x00
 102 #define ICLASS_CMD_UPDATE                       0x87
 103 #define ICLASS_CMD_ACT              0x8E
 104 #define ICLASS_CMD_READ4            0x06
 105
 106
 107 #define ISO14443A_CMD_REQA       0x26
 108 #define ISO14443A_CMD_READBLOCK  0x30
 109 #define ISO14443A_CMD_WUPA       0x52
 110 #define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
 111 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
 112 #define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ?
 113 #define ISO14443A_CMD_HALT       0x50
 114 #define ISO14443A_CMD_RATS       0xE0
 115
 116 #define MIFARE_AUTH_KEYA            0x60
 117 #define MIFARE_AUTH_KEYB            0x61
 118 #define MIFARE_MAGICWUPC1           0x40
 119 #define MIFARE_MAGICWUPC2               0x43
 120 #define MIFARE_MAGICWIPEC               0x41
 121 #define MIFARE_CMD_INC          0xC0
 122 #define MIFARE_CMD_DEC          0xC1
 123 #define MIFARE_CMD_RESTORE      0xC2
 124 #define MIFARE_CMD_TRANSFER     0xB0
 125
 126 #define MIFARE_ULC_WRITE        0xA0
 127 #define MIFARE_ULC_AUTH_1       0x1A
 128 #define MIFARE_ULC_AUTH_2        0xAF
 129
 130 /**
 131 06 00 = INITIATE
 132 0E xx = SELECT ID (xx = Chip-ID)
 133 0B = Get UID
 134 08 yy = Read Block (yy = block number)
 135 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
 136 0C = Reset to Inventory
 137 0F = Completion
 138 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
 139 **/
 140
 141 #define ISO14443B_REQB         0x05
 142 #define ISO14443B_ATTRIB       0x1D
 143 #define ISO14443B_HALT         0x50
 144 #define ISO14443B_INITIATE     0x06
 145 #define ISO14443B_SELECT       0x0E
 146 #define ISO14443B_GET_UID      0x0B
 147 #define ISO14443B_READ_BLK     0x08
 148 #define ISO14443B_WRITE_BLK    0x09
 149 #define ISO14443B_RESET        0x0C
 150 #define ISO14443B_COMPLETION   0x0F
 151 #define ISO14443B_AUTHENTICATE 0x0A
 152
 153 //First byte is 26
 154 #define ISO15693_INVENTORY     0x01
 155 #define ISO15693_STAYQUIET     0x02
 156 //First byte is 02
 157 #define ISO15693_READBLOCK            0x20
 158 #define ISO15693_WRITEBLOCK           0x21
 159 #define ISO15693_LOCKBLOCK            0x22
 160 #define ISO15693_READ_MULTI_BLOCK     0x23
 161 #define ISO15693_SELECT               0x25
 162 #define ISO15693_RESET_TO_READY       0x26
 163 #define ISO15693_WRITE_AFI            0x27
 164 #define ISO15693_LOCK_AFI             0x28
 165 #define ISO15693_WRITE_DSFID          0x29
 166 #define ISO15693_LOCK_DSFID           0x2A
 167 #define ISO15693_GET_SYSTEM_INFO      0x2B
 168 #define ISO15693_READ_MULTI_SECSTATUS 0x2C
 169
 170
 171 // Topaz command set:
 172 #define TOPAZ_REQA                                              0x26    // Request
 173 #define TOPAZ_WUPA                                              0x52    // WakeUp
 174 #define TOPAZ_RID                                               0x78    // Read ID
 175 #define TOPAZ_RALL                                              0x00    // Read All (all bytes)
 176 #define TOPAZ_READ                                              0x01    // Read (a single byte)
 177 #define TOPAZ_WRITE_E                                   0x53    // Write-with-erase (a single byte)
 178 #define TOPAZ_WRITE_NE                                  0x1a    // Write-no-erase (a single byte)
 179
 180
 181 #define ISO_14443A      0
 182 #define ICLASS          1
 183 #define ISO_14443B      2
 184 #define TOPAZ           3
 185
 186 //-- Picopass fuses
 187 #define FUSE_FPERS   0x80
 188 #define FUSE_CODING1 0x40
 189 #define FUSE_CODING0 0x20
 190 #define FUSE_CRYPT1  0x10
 191 #define FUSE_CRYPT0  0x08
 192 #define FUSE_FPROD1  0x04
 193 #define FUSE_FPROD0  0x02
 194 #define FUSE_RA      0x01
 195
 196
 197 void printIclassDumpInfo(uint8_t* iclass_dump);
 198
 199 #endif // PROTOCOLS_H