git.zerfleddert.de Git - proxmark3-svn/blob - armsrc/Makefile.linux

   1 # This makefile needs to be edited to reflect the location
   2 # of your own arm-elf-gcc toolchain (LIB variable)
   3
   4 CC      = arm-elf-gcc
   5 AS      = arm-elf-as
   6 LD      = arm-elf-ld
   7 OBJCOPY = arm-elf-objcopy
   8
   9 # Indicate where your gnuarm toolchain libgcc.a library is located:
  10 LIB = /usr/local/new/gnuarm-4.3.0/lib/gcc/arm-elf/4.3.0/interwork
  11
  12 # Add -DWITH_LCD to EXTRA_CFLAGS if you want support for LCD
  13 # in your firmware (add OBJLCD to OBJ too!)
  14 #EXTRA_CFLAGS = -DWITH_LCD
  15 EXTRA_CFLAGS =
  16
  17 ### You should not need to edit below this line
  18
  19 INCLUDE = -I../include
  20 INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h apps.h
  21 CFLAGS_COMMON = -O6 -c $(INCLUDE) -Wall  -mthumb-interwork
  22 CFLAGS  = $(CFLAGS_COMMON) $(EXTRA_CFLAGS) -mthumb
  23
  24
  25 OBJDIR = obj
  26
  27 OBJLCD = $(OBJDIR)/LCD.o\
  28                  $(OBJDIR)/fonts.o
  29
  30 OBJ =   $(OBJDIR)/start.o \
  31                 $(OBJDIR)/appmain.o \
  32                 $(OBJDIR)/fpga.o \
  33                 $(OBJDIR)/iso15693.o \
  34                 $(OBJDIR)/util.o
  35
  36 # To be compiled in ARM mode, not thumb mode: larger but faster
  37 # Alleviates the 'blew circular buffer' issues somehow...
  38 OBJFAST = $(OBJDIR)/iso14443.o \
  39                   $(OBJDIR)/iso14443a.o
  40
  41 OBJFPGA =       $(OBJDIR)/fpgaimg.o
  42
  43 OBJCOMMON =     $(OBJDIR)/usb.o
  44
  45 all: osimage.s19 fpgaimage.s19 fullimage.s19
  46
  47 fpgaimage.s19: $(OBJFPGA)
  48         @echo fpgaimage.s19
  49         $(LD) -g -Tldscript-fpga -o $(OBJDIR)/fpgaimage.elf $^
  50         $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fpgaimage.elf fpgaimage.s19
  51
  52 osimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON)
  53         @echo osimage.s19
  54         $(LD) -g -Tldscript -o $(OBJDIR)/osimage.elf $^ $(LIB)/libgcc.a
  55         $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/osimage.elf osimage.s19
  56
  57 fullimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON) $(OBJFAST) $(OBJFPGA)
  58         @echo fullimage.s19
  59         $(LD) -g -Tldscript-full -o $(OBJDIR)/fullimage.elf $^  $(LIB)/libgcc.a
  60         $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fullimage.elf fullimage.s19
  61
  62 # Directives to put the *.o in the OBJDIR directory:
  63 $(OBJ): $(OBJDIR)/%.o : %.c
  64         $(CC) $(CFLAGS) $< -o $@
  65
  66 $(OBJFPGA): $(OBJDIR)/%.o : %.c
  67         $(CC) $(CFLAGS) $< -o $@
  68
  69 $(OBJFAST): $(OBJDIR)/%.o : %.c
  70         $(CC) $(CFLAGS_COMMON) $< -o $@
  71
  72 $(OBJCOMMON): $(OBJDIR)/%.o : ../common/%.c
  73         $(CC) $(CFLAGS) $< -o $@
  74
  75 # Those do not work on the current firmware !
  76 flash-fpga: fpgaimage.s19
  77         ../linux/flasher fpga fpgaimage.s19
  78
  79 flash: osimage.s19
  80         ../linux/flasher os osimage.s19
  81
  82 jtag-flash-full: fullimage.s19
  83         ../../OpenOCD/openocd -c "halt; flash write_image fullimage.s19 0x00100000; halt; reset; resume; poll; exit"
  84
  85 jtag-flash-fpga: fpgaimage.s19
  86         ../../OpenOCD/openocd -c "halt; flash write_image fpgaimage.s19 0x00100000; halt; reset; resume; poll; exit"
  87
  88 jtag-flash: osimage.s19
  89         ../../OpenOCD/openocd -c "halt; flash write_image osimage.s19 0x00100000; halt; reset; resume; poll; exit"
  90
  91 clean:
  92         rm -f $(OBJDIR)/*.o $(OBJDIR)/*.elf *.s19
  93
  94 .PHONY: all clean