#define our ports
telnet_port 4444
gdb_port 3333

#commands specific to the Amontec JTAGKey
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_khz 200
jtag_nsrst_delay 200
jtag_ntrst_delay 200

#reset_config <signals> [combination] [trst_type] [srst_type]
reset_config srst_only srst_pulls_trst

jtag newtap sam7x cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f

target create sam7x.cpu arm7tdmi -endian little -chain-position sam7x.cpu -variant arm7tdmi

sam7x.cpu configure -event reset-init {
	soft_reset_halt
	mww 0xfffffd00 0xa5000004	# RSTC_CR: Reset peripherals
	mww 0xfffffd44 0x00008000	# WDT_MR: disable watchdog
	mww 0xfffffd08 0xa5000001	# RSTC_MR enable user reset
	mww 0xfffffc20 0x00005001	# CKGR_MOR : enable the main oscillator
	sleep 10
	mww 0xfffffc2c 0x000b1c02	# CKGR_PLLR: 16MHz * 12/2 = 96MHz
	sleep 10
	mww 0xfffffc30 0x00000007	# PMC_MCKR : MCK = PLL / 2 = 48 MHz
	sleep 10
	mww 0xffffff60 0x00480100	# MC_FMR: flash mode (FWS=1,FMCN=72)
	sleep 100
}

gdb_memory_map enable
gdb_breakpoint_override hard
armv4_5 core_state arm

sam7x.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
flash bank at91sam7 0x100000 0x40000 0 4 sam7x.cpu