FIX: thanks @tony, for pointing out a "end" statement inside tnp3sim.lua

[proxmark3-svn] / client / cmdlft55xx.c

diff --git a/client/cmdlft55xx.c b/client/cmdlft55xx.c
index 605559ac4784e988c0aacc8202580d1cebe892fc..3b56881b7247cf459b47fab12492956bb99ba58d 100644 (file)
--- a/client/cmdlft55xx.c
+++ b/client/cmdlft55xx.c
@@ -28,6 +28,7 @@
 \r
 #define CONFIGURATION_BLOCK 0x00\r
 #define TRACE_BLOCK 0x01\r
+#define T55x7_PWD      0x00000010\r
 \r
 // Default configuration\r
 t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = FALSE, .offset = 0x00, .block0 = 0x00};\r
@@ -37,7 +38,7 @@ int usage_t55xx_config(){
        PrintAndLog("Options:        ");\r
        PrintAndLog("       h                        This help");\r
        PrintAndLog("       b <8|16|32|40|50|64|100|128>     Set bitrate");\r
-       PrintAndLog("       d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa>  Set demodulation FSK / ASK / PSK / NZ / Biphase / Biphase A");\r
+       PrintAndLog("       d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa>  Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A");\r
        PrintAndLog("       i [1]                            Invert data signal, defaults to normal");\r
        PrintAndLog("       o [offset]                       Set offset, where data should start decode in bitstream");\r
        PrintAndLog("");\r
@@ -219,14 +220,11 @@ int CmdT55xxReadBlock(const char *Cmd) {
        int password = 0xFFFFFFFF; //default to blank Block 7\r
 \r
        char cmdp = param_getchar(Cmd, 0);\r
-       if (cmdp == 'h' || cmdp == 'H')\r
-               return usage_t55xx_read();\r
+       if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_read();\r
 \r
        int res = sscanf(Cmd, "%d %x", &block, &password);\r
 \r
-       if ( res < 1 || res > 2 )\r
-               return usage_t55xx_read();\r
-\r
+       if ( res < 1 || res > 2 ) return usage_t55xx_read();\r
        \r
        if ((block < 0) | (block > 7)) {\r
                PrintAndLog("Block must be between 0 and 7");\r
@@ -238,8 +236,20 @@ int CmdT55xxReadBlock(const char *Cmd) {
 \r
        //Password mode\r
        if ( res == 2 ) {\r
-               c.arg[2] = password;\r
-               c.d.asBytes[0] = 0x1; \r
+               \r
+               // try reading the config block and verify that PWD bit is set before doing this!\r
+               AquireData( CONFIGURATION_BLOCK );\r
+               if ( !tryDetectModulation() ) {\r
+                       PrintAndLog("Could not detect is PWD bit is set in config block. Exits.");\r
+                       return 1;\r
+               }\r
+               //if PWD bit is set,  allow to execute read command with password.\r
+               if (( config.block0 & T55x7_PWD ) == 1) {\r
+                       c.arg[2] = password;\r
+                       c.d.asBytes[0] = 0x1;                   \r
+               } else {                \r
+                       PrintAndLog("PWD bit is NOT set in config block. Reading without password...");\r
+               }\r
        }\r
 \r
        clearCommandBuffer();\r
@@ -252,8 +262,8 @@ int CmdT55xxReadBlock(const char *Cmd) {
        uint8_t got[12000];\r
        GetFromBigBuf(got,sizeof(got),0);\r
        WaitForResponse(CMD_ACK,NULL);\r
-       setGraphBuf(got, 12000);\r
-       DemodBufferLen=0;\r
+       setGraphBuf(got, sizeof(got));\r
+       //DemodBufferLen=0;\r
        if (!DecodeT55xxBlock()) return 3;\r
        char blk[10]={0};\r
        sprintf(blk,"%d", block);\r
@@ -270,8 +280,8 @@ bool DecodeT55xxBlock(){
        DemodBufferLen = 0x00;\r
 \r
        //trim 1/2 a clock from beginning\r
-       snprintf(cmdStr, sizeof(buf),"%d", bitRate[config.bitrate]/2 );\r
-       CmdLtrim(cmdStr);\r
+       //snprintf(cmdStr, sizeof(buf),"%d", bitRate[config.bitrate]/2 );\r
+       //CmdLtrim(cmdStr);\r
        switch( config.modulation ){\r
                case DEMOD_FSK:\r
                        snprintf(cmdStr, sizeof(buf),"%d %d", bitRate[config.bitrate], config.inverted );\r
@@ -333,7 +343,7 @@ int CmdT55xxDetect(const char *Cmd){
 \r
 // detect configuration?\r
 bool tryDetectModulation(){\r
-       char cmdStr[8] = {0};\r
+       //char cmdStr[8] = {0};\r
        uint8_t hits = 0;\r
        t55xx_conf_block_t tests[15];\r
        int bitRate=0;\r
@@ -341,8 +351,8 @@ bool tryDetectModulation(){
        save_restoreGB(1);\r
        if (GetFskClock("", FALSE, FALSE)){ \r
                fskClocks(&fc1, &fc2, &clk, FALSE);\r
-               sprintf(cmdStr,"%d", clk/2);\r
-               CmdLtrim(cmdStr);\r
+               //sprintf(cmdStr,"%d", clk/2);\r
+               //CmdLtrim(cmdStr);\r
                if ( FSKrawDemod("0 0", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate)){\r
                        tests[hits].modulation = DEMOD_FSK;\r
                        if (fc1==8 && fc2 == 5)\r
@@ -369,8 +379,8 @@ bool tryDetectModulation(){
        } else {\r
                clk = GetAskClock("", FALSE, FALSE);\r
                if (clk>0) {\r
-                       sprintf(cmdStr,"%d", clk/2);\r
-                       CmdLtrim(cmdStr);\r
+                       //sprintf(cmdStr,"%d", clk/2);\r
+                       //CmdLtrim(cmdStr);\r
                        if ( ASKDemod("0 0 0", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate)) {\r
                                tests[hits].modulation = DEMOD_ASK;\r
                                tests[hits].bitrate = bitRate;\r
@@ -404,8 +414,8 @@ bool tryDetectModulation(){
                save_restoreGB(0);\r
                clk = GetNrzClock("", FALSE, FALSE);\r
                if (clk>0) {\r
-                       sprintf(cmdStr,"%d", clk/2);\r
-                       CmdLtrim(cmdStr);\r
+                       //sprintf(cmdStr,"%d", clk/2);\r
+                       //CmdLtrim(cmdStr);\r
                        if ( NRZrawDemod("0 0 1", FALSE)  && test(DEMOD_NRZ, &tests[hits].offset, &bitRate)) {\r
                                tests[hits].modulation = DEMOD_NRZ;\r
                                tests[hits].bitrate = bitRate;\r
@@ -427,9 +437,9 @@ bool tryDetectModulation(){
                save_restoreGB(0);\r
                clk = GetPskClock("", FALSE, FALSE);\r
                if (clk>0) {\r
-                       PrintAndLog("clk %d",clk);\r
-                       sprintf(cmdStr,"%d", clk/2);\r
-                       CmdLtrim(cmdStr);       \r
+                       //PrintAndLog("clk %d",clk);\r
+                       //sprintf(cmdStr,"%d", clk/2);\r
+                       //CmdLtrim(cmdStr);     \r
                        if ( PSKDemod("0 0 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate)) {\r
                                tests[hits].modulation = DEMOD_PSK1;\r
                                tests[hits].bitrate = bitRate;\r
@@ -667,11 +677,11 @@ int CmdT55xxWriteBlock(const char *Cmd)
 \r
        if (block > 7) {\r
                PrintAndLog("Block number must be between 0 and 7");\r
-               return 2;\r
+               return 1;\r
        }\r
        \r
-       UsbCommand resp;\r
        UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {data, block, 0}};\r
+       UsbCommand resp;\r
        c.d.asBytes[0] = 0x0; \r
 \r
        PrintAndLog("Writing to block: %d  data  : 0x%08X", block, data);\r
@@ -1058,6 +1068,12 @@ char * GetSelectedModulationStr( uint8_t id){
        return buf;\r
 }\r
 \r
+void t55x7_create_config_block( int tagtype ){\r
+       //switch?\r
+       \r
+       \r
+}\r
+\r
 /*\r
 uint32_t PackBits(uint8_t start, uint8_t len, uint8_t* bits){\r
        \r