// FDXB requires data inversion and BiPhase 57 is simply BipHase 50 inverted, so we can either do it using the modulation scheme or the inversion flag\r
// we've done both below to prove that it works either way, and the modulation value for BiPhase 50 in the Atmel data sheet of binary "10001" (17) is a typo,\r
// and it should actually be "10000" (16)\r
-// #define T55X7_FDXB_CONFIG_BLOCK 903F8080 // emulate fdx-b - xtended mode, BiPhase ('57), data rate 32, 4 data blocks\r
-#define T55X7_FDXB_CONFIG_BLOCK 0x903F0082 // emulate fdx-b - xtended mode, BiPhase ('50), invert data, data rate 32, 4 data blocks\r
-#define T55X7_HID_26_CONFIG_BLOCK 0x00107060 // hid 26 bit - compat mode, FSK2a, data rate 50, 3 data blocks\r
-#define T55X7_INDALA_64_CONFIG_BLOCK 0x00081040 // emulate indala 64 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 2\r
-#define T55X7_INDALA_224_CONFIG_BLOCK 0x000810E0 // emulate indala 224 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 7\r
-#define T55X7_GUARDPROXII_CONFIG_BLOCK 0x00150060 // bitrate 64pcb, Direct modulation, Biphase, 3 data blocks\r
-#define T55X7_VIKING_CONFIG_BLOCK 0x00088040 // compat mode, data rate 32, Manchester, 2 data blocks\r
+// #define T55X7_FDXB_CONFIG_BLOCK 903F8080 // emulate fdx-b - xtended mode, BiPhase ('57), data rate 32, 4 data blocks\r
+#define T55X7_FDXB_CONFIG_BLOCK 0x903F0082 // emulate fdx-b - xtended mode, BiPhase ('50), invert data, data rate 32, 4 data blocks\r
+#define T55X7_HID_26_CONFIG_BLOCK 0x00107060 // hid 26 bit - compat mode, FSK2a, data rate 50, 3 data blocks\r
+#define T55X7_INDALA_64_CONFIG_BLOCK 0x00081040 // emulate indala 64 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 2\r
+#define T55X7_INDALA_224_CONFIG_BLOCK 0x000810E0 // emulate indala 224 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 7\r
+#define T55X7_GUARDPROXII_CONFIG_BLOCK 0x00150060 // bitrate 64pcb, Direct modulation, Biphase, 3 data blocks\r
+#define T55X7_VIKING_CONFIG_BLOCK 0x00088040 // compat mode, data rate 32, Manchester, 2 data blocks\r
+#define T55X7_NORALYS_CONFIG_BLOCK 0x00088C6A // compat mode, (NORALYS - KCP3000)\r
+#define T55X7_IOPROX_CONFIG_BLOCK 0x00147040 // maxblock 2\r
#define T55X7_bin 0b0010\r
\r
\r
RF_100 = 0x06,\r
RF_128 = 0x07,\r
} bitrate;\r
+ bool Q5;\r
} t55xx_conf_block_t;\r
+t55xx_conf_block_t Get_t55xx_Config();\r
+void Set_t55xx_Config(t55xx_conf_block_t conf);\r
+\r
\r
int CmdLFT55XX(const char *Cmd);\r
int CmdT55xxSetConfig(const char *Cmd);\r
int CmdT55xxReadTrace(const char *Cmd);\r
int CmdT55xxInfo(const char *Cmd);\r
int CmdT55xxDetect(const char *Cmd);\r
+int CmdResetRead(const char *Cmd);\r
+int CmdT55xxWipe(const char *Cmd);\r
+int CmdT55xxBruteForce(const char *Cmd);\r
\r
char * GetBitRateStr(uint32_t id);\r
char * GetSaferStr(uint32_t id);\r
char * GetModelStrFromCID(uint32_t cid);\r
char * GetSelectedModulationStr( uint8_t id);\r
uint32_t PackBits(uint8_t start, uint8_t len, uint8_t *bitstream);\r
+void printT5xxHeader(uint8_t page);\r
void printT55xxBlock(const char *demodStr);\r
-void printConfiguration( t55xx_conf_block_t b);\r
+int printConfiguration( t55xx_conf_block_t b);\r
\r
bool DecodeT55xxBlock();\r
bool tryDetectModulation();\r
-bool test(uint8_t mode, uint8_t *offset, int *fndBitRate);\r
+bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5);\r
int special(const char *Cmd);\r
-int AquireData( uint8_t block );\r
+int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password );\r
\r
+bool detectPassword(int password);\r
#endif\r