//-----------------------------------------------------------------------------
// Low frequency commands
//-----------------------------------------------------------------------------
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <limits.h>
-#include "proxmark3.h"
-#include "data.h"
-#include "graph.h"
-#include "ui.h"
-#include "cmdparser.h"
-#include "cmdmain.h"
-#include "cmddata.h"
-#include "util.h"
#include "cmdlf.h"
-#include "cmdlfhid.h"
-#include "cmdlfti.h"
-#include "cmdlfem4x.h"
-#include "cmdlfhitag.h"
-#include "cmdlft55xx.h"
-#include "cmdlfpcf7931.h"
-#include "cmdlfio.h"
-#include "lfdemod.h"
-
static int CmdHelp(const char *Cmd);
-/* send a command before reading */
+int usage_lf_cmdread(void) {
+ PrintAndLog("Usage: lf cmdread d <delay period> z <zero period> o <one period> c <cmdbytes> [H]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" L Low frequency (125 KHz)");
+ PrintAndLog(" H High frequency (134 KHz)");
+ PrintAndLog(" d <delay> delay OFF period, (dec)");
+ PrintAndLog(" z <zero> time period ZERO, (dec)");
+ PrintAndLog(" o <one> time period ONE, (dec)");
+ PrintAndLog(" c <cmd> Command bytes");
+ PrintAndLog(" ************* All periods in microseconds (ms)");
+ PrintAndLog("Examples:");
+ PrintAndLog(" lf cmdread d 80 z 100 o 200 c 11000");
+ PrintAndLog(" lf cmdread d 80 z 100 o 100 c 11000 H");
+ return 0;
+}
+int usage_lf_read(void){
+ PrintAndLog("Usage: lf read [h] [s]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" s silent run no printout");
+ PrintAndLog("This function takes no arguments. ");
+ PrintAndLog("Use 'lf config' to set parameters.");
+ return 0;
+}
+int usage_lf_snoop(void) {
+ PrintAndLog("Usage: lf snoop");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog("This function takes no arguments. ");
+ PrintAndLog("Use 'lf config' to set parameters.");
+ return 0;
+}
+int usage_lf_config(void) {
+ PrintAndLog("Usage: lf config [H|<divisor>] [b <bps>] [d <decim>] [a 0|1]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" L Low frequency (125 KHz)");
+ PrintAndLog(" H High frequency (134 KHz)");
+ PrintAndLog(" q <divisor> Manually set divisor. 88-> 134KHz, 95-> 125 Hz");
+ PrintAndLog(" b <bps> Sets resolution of bits per sample. Default (max): 8");
+ PrintAndLog(" d <decim> Sets decimation. A value of N saves only 1 in N samples. Default: 1");
+ PrintAndLog(" a [0|1] Averaging - if set, will average the stored sample value when decimating. Default: 1");
+ PrintAndLog(" t <threshold> Sets trigger threshold. 0 means no threshold (range: 0-128)");
+ PrintAndLog("Examples:");
+ PrintAndLog(" lf config b 8 L");
+ PrintAndLog(" Samples at 125KHz, 8bps.");
+ PrintAndLog(" lf config H b 4 d 3");
+ PrintAndLog(" Samples at 134KHz, averages three samples into one, stored with ");
+ PrintAndLog(" a resolution of 4 bits per sample.");
+ PrintAndLog(" lf read");
+ PrintAndLog(" Performs a read (active field)");
+ PrintAndLog(" lf snoop");
+ PrintAndLog(" Performs a snoop (no active field)");
+ return 0;
+}
+int usage_lf_simfsk(void) {
+ PrintAndLog("Usage: lf simfsk [c <clock>] [i] [H <fcHigh>] [L <fcLow>] [d <hexdata>]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
+ PrintAndLog(" i invert data");
+ PrintAndLog(" H <fcHigh> Manually set the larger Field Clock");
+ PrintAndLog(" L <fcLow> Manually set the smaller Field Clock");
+ //PrintAndLog(" s TBD- -to enable a gap between playback repetitions - default: no gap");
+ PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
+ PrintAndLog("\n NOTE: if you set one clock manually set them all manually");
+ return 0;
+}
+int usage_lf_simask(void) {
+ PrintAndLog("Usage: lf simask [c <clock>] [i] [b|m|r] [s] [d <raw hex to sim>]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
+ PrintAndLog(" i invert data");
+ PrintAndLog(" b sim ask/biphase");
+ PrintAndLog(" m sim ask/manchester - Default");
+ PrintAndLog(" r sim ask/raw");
+ PrintAndLog(" s add t55xx Sequence Terminator gap - default: no gaps (only manchester)");
+ PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
+ return 0;
+}
+int usage_lf_simpsk(void) {
+ PrintAndLog("Usage: lf simpsk [1|2|3] [c <clock>] [i] [r <carrier>] [d <raw hex to sim>]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
+ PrintAndLog(" i invert data");
+ PrintAndLog(" 1 set PSK1 (default)");
+ PrintAndLog(" 2 set PSK2");
+ PrintAndLog(" 3 set PSK3");
+ PrintAndLog(" r <carrier> 2|4|8 are valid carriers: default = 2");
+ PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
+ return 0;
+}
+int usage_lf_find(void){
+ PrintAndLog("Usage: lf search <0|1> [u]");
+ PrintAndLog(" <use data from Graphbuffer> , if not set, try reading data from tag.");
+ PrintAndLog(" [Search for Unknown tags] , if not set, reads only known tags.");
+ PrintAndLog("");
+ PrintAndLog(" sample: lf search = try reading data from tag & search for known tags");
+ PrintAndLog(" : lf search 1 = use data from GraphBuffer & search for known tags");
+ PrintAndLog(" : lf search u = try reading data from tag & search for known and unknown tags");
+ PrintAndLog(" : lf search 1 u = use data from GraphBuffer & search for known and unknown tags");
+ return 0;
+}
+
+
+/* send a LF command before reading */
int CmdLFCommandRead(const char *Cmd)
{
- static char dummy[3];
+ static char dummy[3] = {0x20,0x00,0x00};
+ UsbCommand c = {CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K};
+ bool errors = FALSE;
- dummy[0]= ' ';
+ uint8_t cmdp = 0;
+ int strLength = 0;
- UsbCommand c = {CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K};
- sscanf(Cmd, "%"lli" %"lli" %"lli" %s %s", &c.arg[0], &c.arg[1], &c.arg[2],(char*)(&c.d.asBytes),(char*)(&dummy+1));
- // in case they specified 'h'
- strcpy((char *)&c.d.asBytes + strlen((char *)c.d.asBytes), dummy);
+ while(param_getchar(Cmd, cmdp) != 0x00) {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ return usage_lf_cmdread();
+ case 'H':
+ dummy[1]='h';
+ cmdp++;
+ break;
+ case 'L':
+ cmdp++;
+ break;
+ case 'c':
+ strLength = param_getstr(Cmd, cmdp+1, (char *)&c.d.asBytes);
+ cmdp+=2;
+ break;
+ case 'd':
+ c.arg[0] = param_get32ex(Cmd, cmdp+1, 0, 10);
+ cmdp+=2;
+ break;
+ case 'z':
+ c.arg[1] = param_get32ex(Cmd, cmdp+1, 0, 10);
+ cmdp+=2;
+ break;
+ case 'o':
+ c.arg[2] = param_get32ex(Cmd, cmdp+1, 0, 10);
+ cmdp+=2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = 1;
+ break;
+ }
+ if(errors) break;
+ }
+ // No args
+ if (cmdp == 0) errors = 1;
+
+ //Validations
+ if (errors) return usage_lf_cmdread();
+
+ // in case they specified 'H'
+ strcpy((char *)&c.d.asBytes + strLength, dummy);
+
+ clearCommandBuffer();
SendCommand(&c);
return 0;
}
int CmdFlexdemod(const char *Cmd)
{
- int i;
- for (i = 0; i < GraphTraceLen; ++i) {
- if (GraphBuffer[i] < 0) {
- GraphBuffer[i] = -1;
- } else {
- GraphBuffer[i] = 1;
- }
- }
+ int i;
+ for (i = 0; i < GraphTraceLen; ++i) {
+ if (GraphBuffer[i] < 0) {
+ GraphBuffer[i] = -1;
+ } else {
+ GraphBuffer[i] = 1;
+ }
+ }
#define LONG_WAIT 100
- int start;
- for (start = 0; start < GraphTraceLen - LONG_WAIT; start++) {
- int first = GraphBuffer[start];
- for (i = start; i < start + LONG_WAIT; i++) {
- if (GraphBuffer[i] != first) {
- break;
- }
- }
- if (i == (start + LONG_WAIT)) {
- break;
- }
- }
- if (start == GraphTraceLen - LONG_WAIT) {
- PrintAndLog("nothing to wait for");
- return 0;
- }
-
- GraphBuffer[start] = 2;
- GraphBuffer[start+1] = -2;
+ int start;
+ for (start = 0; start < GraphTraceLen - LONG_WAIT; start++) {
+ int first = GraphBuffer[start];
+ for (i = start; i < start + LONG_WAIT; i++) {
+ if (GraphBuffer[i] != first) {
+ break;
+ }
+ }
+ if (i == (start + LONG_WAIT)) {
+ break;
+ }
+ }
+ if (start == GraphTraceLen - LONG_WAIT) {
+ PrintAndLog("nothing to wait for");
+ return 0;
+ }
+
+ GraphBuffer[start] = 2;
+ GraphBuffer[start+1] = -2;
uint8_t bits[64] = {0x00};
int bit, sum;
- i = start;
- for (bit = 0; bit < 64; bit++) {
+ i = start;
+ for (bit = 0; bit < 64; bit++) {
sum = 0;
for (int j = 0; j < 16; j++) {
- sum += GraphBuffer[i++];
- }
+ sum += GraphBuffer[i++];
+ }
bits[bit] = (sum > 0) ? 1 : 0;
- PrintAndLog("bit %d sum %d", bit, sum);
- }
-
- for (bit = 0; bit < 64; bit++) {
- int j;
- int sum = 0;
- for (j = 0; j < 16; j++) {
- sum += GraphBuffer[i++];
- }
- if (sum > 0 && bits[bit] != 1) {
- PrintAndLog("oops1 at %d", bit);
- }
- if (sum < 0 && bits[bit] != 0) {
- PrintAndLog("oops2 at %d", bit);
- }
- }
+ PrintAndLog("bit %d sum %d", bit, sum);
+ }
+
+ for (bit = 0; bit < 64; bit++) {
+ int j;
+ int sum = 0;
+ for (j = 0; j < 16; j++) {
+ sum += GraphBuffer[i++];
+ }
+ if (sum > 0 && bits[bit] != 1) {
+ PrintAndLog("oops1 at %d", bit);
+ }
+ if (sum < 0 && bits[bit] != 0) {
+ PrintAndLog("oops2 at %d", bit);
+ }
+ }
// HACK writing back to graphbuffer.
- GraphTraceLen = 32*64;
- i = 0;
- int phase = 0;
- for (bit = 0; bit < 64; bit++) {
+ GraphTraceLen = 32*64;
+ i = 0;
+ int phase = 0;
+ for (bit = 0; bit < 64; bit++) {
phase = (bits[bit] == 0) ? 0 : 1;
- int j;
- for (j = 0; j < 32; j++) {
- GraphBuffer[i++] = phase;
- phase = !phase;
- }
- }
-
- RepaintGraphWindow();
- return 0;
+ int j;
+ for (j = 0; j < 32; j++) {
+ GraphBuffer[i++] = phase;
+ phase = !phase;
+ }
+ }
+
+ RepaintGraphWindow();
+ return 0;
}
-
+
int CmdIndalaDemod(const char *Cmd)
{
// Usage: recover 64bit UID by default, specify "224" as arg to recover a 224bit UID
uint8_t rawbits[4096];
int rawbit = 0;
int worst = 0, worstPos = 0;
- // PrintAndLog("Expecting a bit less than %d raw bits", GraphTraceLen / 32);
+ // PrintAndLog("Expecting a bit less than %d raw bits", GraphTraceLen / 32);
+
+ // loop through raw signal - since we know it is psk1 rf/32 fc/2 skip every other value (+=2)
for (i = 0; i < GraphTraceLen-1; i += 2) {
count += 1;
if ((GraphBuffer[i] > GraphBuffer[i + 1]) && (state != 1)) {
+ // appears redundant - marshmellow
if (state == 0) {
for (j = 0; j < count - 8; j += 16) {
rawbits[rawbit++] = 0;
state = 1;
count = 0;
} else if ((GraphBuffer[i] < GraphBuffer[i + 1]) && (state != 0)) {
+ //appears redundant
if (state == 1) {
for (j = 0; j < count - 8; j += 16) {
rawbits[rawbit++] = 1;
count = 0;
}
}
-
- if (rawbit>0){
+
+ if ( rawbit>0 ){
PrintAndLog("Recovered %d raw bits, expected: %d", rawbit, GraphTraceLen/32);
PrintAndLog("worst metric (0=best..7=worst): %d at pos %d", worst, worstPos);
} else {
break;
}
}
-
+
if (start == rawbit - uidlen + 1) {
PrintAndLog("nothing to wait for");
return 0;
}
times = 1;
}
-
+
//convert UID to HEX
uint32_t uid1, uid2, uid3, uid4, uid5, uid6, uid7;
int idx;
if (uidlen==64){
for( idx=0; idx<64; idx++) {
- if (showbits[idx] == '0') {
- uid1=(uid1<<1)|(uid2>>31);
- uid2=(uid2<<1)|0;
- } else {
- uid1=(uid1<<1)|(uid2>>31);
- uid2=(uid2<<1)|1;
- }
- }
+ if (showbits[idx] == '0') {
+ uid1 = (uid1<<1) | (uid2>>31);
+ uid2 = (uid2<<1) | 0;
+ } else {
+ uid1 = (uid1<<1) | (uid2>>31);
+ uid2 = (uid2<<1) | 1;
+ }
+ }
PrintAndLog("UID=%s (%x%08x)", showbits, uid1, uid2);
- }
- else {
+ } else {
uid3 = uid4 = uid5 = uid6 = uid7 = 0;
for( idx=0; idx<224; idx++) {
- uid1=(uid1<<1)|(uid2>>31);
- uid2=(uid2<<1)|(uid3>>31);
- uid3=(uid3<<1)|(uid4>>31);
- uid4=(uid4<<1)|(uid5>>31);
- uid5=(uid5<<1)|(uid6>>31);
- uid6=(uid6<<1)|(uid7>>31);
-
+ uid1 = (uid1<<1) | (uid2>>31);
+ uid2 = (uid2<<1) | (uid3>>31);
+ uid3 = (uid3<<1) | (uid4>>31);
+ uid4 = (uid4<<1) | (uid5>>31);
+ uid5 = (uid5<<1) | (uid6>>31);
+ uid6 = (uid6<<1) | (uid7>>31);
+
if (showbits[idx] == '0')
uid7 = (uid7<<1) | 0;
else
uid7 = (uid7<<1) | 1;
- }
+ }
PrintAndLog("UID=%s (%x%08x%08x%08x%08x%08x%08x)", showbits, uid1, uid2, uid3, uid4, uid5, uid6, uid7);
}
// Checking UID against next occurrences
- int failed = 0;
+ int failed = 0;
for (; i + uidlen <= rawbit;) {
failed = 0;
for (bit = 0; bit < uidlen; bit++) {
// Remodulating for tag cloning
// HACK: 2015-01-04 this will have an impact on our new way of seening lf commands (demod)
// since this changes graphbuffer data.
- GraphTraceLen = 32*uidlen;
+ GraphTraceLen = 32 * uidlen;
i = 0;
int phase = 0;
for (bit = 0; bit < uidlen; bit++) {
- if (bits[bit] == 0) {
- phase = 0;
- } else {
- phase = 1;
- }
+ phase = (bits[bit] == 0) ? 0 : 1;
int j;
for (j = 0; j < 32; j++) {
GraphBuffer[i++] = phase;
int CmdIndalaClone(const char *Cmd)
{
- UsbCommand c;
+ UsbCommand c;
unsigned int uid1, uid2, uid3, uid4, uid5, uid6, uid7;
uid1 = uid2 = uid3 = uid4 = uid5 = uid6 = uid7 = 0;
- int n = 0, i = 0;
-
- if (strchr(Cmd,'l') != 0) {
- while (sscanf(&Cmd[i++], "%1x", &n ) == 1) {
- uid1 = (uid1 << 4) | (uid2 >> 28);
- uid2 = (uid2 << 4) | (uid3 >> 28);
- uid3 = (uid3 << 4) | (uid4 >> 28);
- uid4 = (uid4 << 4) | (uid5 >> 28);
- uid5 = (uid5 << 4) | (uid6 >> 28);
- uid6 = (uid6 << 4) | (uid7 >> 28);
- uid7 = (uid7 << 4) | (n & 0xf);
- }
- PrintAndLog("Cloning 224bit tag with UID %x%08x%08x%08x%08x%08x%08x", uid1, uid2, uid3, uid4, uid5, uid6, uid7);
- c.cmd = CMD_INDALA_CLONE_TAG_L;
- c.d.asDwords[0] = uid1;
- c.d.asDwords[1] = uid2;
- c.d.asDwords[2] = uid3;
- c.d.asDwords[3] = uid4;
- c.d.asDwords[4] = uid5;
- c.d.asDwords[5] = uid6;
- c.d.asDwords[6] = uid7;
+ int n = 0, i = 0;
+
+ if (strchr(Cmd,'l') != 0) {
+ while (sscanf(&Cmd[i++], "%1x", &n ) == 1) {
+ uid1 = (uid1 << 4) | (uid2 >> 28);
+ uid2 = (uid2 << 4) | (uid3 >> 28);
+ uid3 = (uid3 << 4) | (uid4 >> 28);
+ uid4 = (uid4 << 4) | (uid5 >> 28);
+ uid5 = (uid5 << 4) | (uid6 >> 28);
+ uid6 = (uid6 << 4) | (uid7 >> 28);
+ uid7 = (uid7 << 4) | (n & 0xf);
+ }
+ PrintAndLog("Cloning 224bit tag with UID %x%08x%08x%08x%08x%08x%08x", uid1, uid2, uid3, uid4, uid5, uid6, uid7);
+ c.cmd = CMD_INDALA_CLONE_TAG_L;
+ c.d.asDwords[0] = uid1;
+ c.d.asDwords[1] = uid2;
+ c.d.asDwords[2] = uid3;
+ c.d.asDwords[3] = uid4;
+ c.d.asDwords[4] = uid5;
+ c.d.asDwords[5] = uid6;
+ c.d.asDwords[6] = uid7;
} else {
- while (sscanf(&Cmd[i++], "%1x", &n ) == 1) {
- uid1 = (uid1 << 4) | (uid2 >> 28);
- uid2 = (uid2 << 4) | (n & 0xf);
- }
- PrintAndLog("Cloning 64bit tag with UID %x%08x", uid1, uid2);
- c.cmd = CMD_INDALA_CLONE_TAG;
- c.arg[0] = uid1;
- c.arg[1] = uid2;
- }
-
- SendCommand(&c);
- return 0;
-}
-
-int usage_lf_read()
-{
- PrintAndLog("Usage: lf read");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" s silent run no printout");
- PrintAndLog("This function takes no arguments. ");
- PrintAndLog("Use 'lf config' to set parameters.");
- return 0;
-}
-int usage_lf_snoop()
-{
- PrintAndLog("Usage: lf snoop");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog("This function takes no arguments. ");
- PrintAndLog("Use 'lf config' to set parameters.");
- return 0;
-}
-
-int usage_lf_config()
-{
- PrintAndLog("Usage: lf config [H|<divisor>] [b <bps>] [d <decim>] [a 0|1]");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" L Low frequency (125 KHz)");
- PrintAndLog(" H High frequency (134 KHz)");
- PrintAndLog(" q <divisor> Manually set divisor. 88-> 134KHz, 95-> 125 Hz");
- PrintAndLog(" b <bps> Sets resolution of bits per sample. Default (max): 8");
- PrintAndLog(" d <decim> Sets decimation. A value of N saves only 1 in N samples. Default: 1");
- PrintAndLog(" a [0|1] Averaging - if set, will average the stored sample value when decimating. Default: 1");
- PrintAndLog(" t <threshold> Sets trigger threshold. 0 means no threshold");
- PrintAndLog("Examples:");
- PrintAndLog(" lf config b 8 L");
- PrintAndLog(" Samples at 125KHz, 8bps.");
- PrintAndLog(" lf config H b 4 d 3");
- PrintAndLog(" Samples at 134KHz, averages three samples into one, stored with ");
- PrintAndLog(" a resolution of 4 bits per sample.");
- PrintAndLog(" lf read");
- PrintAndLog(" Performs a read (active field)");
- PrintAndLog(" lf snoop");
- PrintAndLog(" Performs a snoop (no active field)");
- return 0;
+ while (sscanf(&Cmd[i++], "%1x", &n ) == 1) {
+ uid1 = (uid1 << 4) | (uid2 >> 28);
+ uid2 = (uid2 << 4) | (n & 0xf);
+ }
+ PrintAndLog("Cloning 64bit tag with UID %x%08x", uid1, uid2);
+ c.cmd = CMD_INDALA_CLONE_TAG;
+ c.arg[0] = uid1;
+ c.arg[1] = uid2;
+ }
+
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
int CmdLFSetConfig(const char *Cmd)
{
-
uint8_t divisor = 0;//Frequency divisor
uint8_t bps = 0; // Bits per sample
uint8_t decimation = 0; //How many to keep
bool averaging = 1; // Defaults to true
bool errors = FALSE;
- int trigger_threshold =-1;//Means no change
+ int trigger_threshold = -1;//Means no change
uint8_t unsigned_trigg = 0;
- uint8_t cmdp =0;
+ uint8_t cmdp = 0;
while(param_getchar(Cmd, cmdp) != 0x00)
{
switch(param_getchar(Cmd, cmdp))
}
if(errors) break;
}
- if(cmdp == 0)
- {
- errors = 1;// No args
- }
+
+ // No args
+ if (cmdp == 0) errors = 1;
//Validations
- if(errors)
- {
- return usage_lf_config();
- }
+ if (errors) return usage_lf_config();
+
//Bps is limited to 8, so fits in lower half of arg1
- if(bps >> 8) bps = 8;
+ if (bps >> 4) bps = 8;
+
+ sample_config config = { decimation, bps, averaging, divisor, trigger_threshold };
- sample_config config = {
- decimation,bps,averaging,divisor,trigger_threshold
- };
//Averaging is a flag on high-bit of arg[1]
UsbCommand c = {CMD_SET_LF_SAMPLING_CONFIG};
memcpy(c.d.asBytes,&config,sizeof(sample_config));
+ clearCommandBuffer();
SendCommand(&c);
return 0;
}
int CmdLFRead(const char *Cmd)
{
-
- uint8_t cmdp = 0;
bool arg1 = false;
- if (param_getchar(Cmd, cmdp) == 'h')
- {
- return usage_lf_read();
- }
- if (param_getchar(Cmd, cmdp) == 's') arg1 = true; //suppress print
- //And ship it to device
+ uint8_t cmdp = param_getchar(Cmd, 0);
+
+ if ( cmdp == 'h' || cmdp == 'H') return usage_lf_read();
+
+ //suppress print
+ if ( cmdp == 's' || cmdp == 'S') arg1 = true;
+
UsbCommand c = {CMD_ACQUIRE_RAW_ADC_SAMPLES_125K, {arg1,0,0}};
+ clearCommandBuffer();
SendCommand(&c);
- WaitForResponse(CMD_ACK,NULL);
+ if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {
+ PrintAndLog("command execution time out");
+ return 1;
+ }
return 0;
}
int CmdLFSnoop(const char *Cmd)
{
- uint8_t cmdp =0;
- if(param_getchar(Cmd, cmdp) == 'h')
- {
- return usage_lf_snoop();
- }
-
+ uint8_t cmdp = param_getchar(Cmd, 0);
+ if(cmdp == 'h' || cmdp == 'H') return usage_lf_snoop();
+
UsbCommand c = {CMD_LF_SNOOP_RAW_ADC_SAMPLES};
+ clearCommandBuffer();
SendCommand(&c);
WaitForResponse(CMD_ACK,NULL);
return 0;
static void ChkBitstream(const char *str)
{
- int i;
+ int i;
- /* convert to bitstream if necessary */
+ /* convert to bitstream if necessary */
for (i = 0; i < (int)(GraphTraceLen / 2); i++){
if (GraphBuffer[i] > 1 || GraphBuffer[i] < 0) {
- CmdGetBitStream("");
- break;
- }
- }
+ CmdGetBitStream("");
+ break;
+ }
+ }
}
//Attempt to simulate any wave in buffer (one bit per output sample)
// converts GraphBuffer to bitstream (based on zero crossings) if needed.
sscanf(Cmd, "%i", &gap);
// convert to bitstream if necessary
-
ChkBitstream(Cmd);
//can send only 512 bits at a time (1 byte sent per bit...)
printf("Sending [%d bytes]", GraphTraceLen);
for (i = 0; i < GraphTraceLen; i += USB_CMD_DATA_SIZE) {
- UsbCommand c={CMD_DOWNLOADED_SIM_SAMPLES_125K, {i, 0, 0}};
+ UsbCommand c = {CMD_DOWNLOADED_SIM_SAMPLES_125K, {i, 0, 0}};
for (j = 0; j < USB_CMD_DATA_SIZE; j++) {
c.d.asBytes[j] = GraphBuffer[i+j];
}
+ clearCommandBuffer();
SendCommand(&c);
WaitForResponse(CMD_ACK,NULL);
printf(".");
}
- printf("\n");
- PrintAndLog("Starting to simulate");
+ PrintAndLog("\nStarting to simulate");
UsbCommand c = {CMD_SIMULATE_TAG_125K, {GraphTraceLen, gap, 0}};
+ clearCommandBuffer();
SendCommand(&c);
return 0;
}
-int usage_lf_simfsk(void)
-{
- //print help
- PrintAndLog("Usage: lf simfsk [c <clock>] [i] [H <fcHigh>] [L <fcLow>] [d <hexdata>]");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
- PrintAndLog(" i invert data");
- PrintAndLog(" H <fcHigh> Manually set the larger Field Clock");
- PrintAndLog(" L <fcLow> Manually set the smaller Field Clock");
- //PrintAndLog(" s TBD- -to enable a gap between playback repetitions - default: no gap");
- PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
- PrintAndLog("\n NOTE: if you set one clock manually set them all manually");
- return 0;
-}
-
-int usage_lf_simask(void)
-{
- //print help
- PrintAndLog("Usage: lf simask [c <clock>] [i] [b|m|r] [s] [d <raw hex to sim>]");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
- PrintAndLog(" i invert data");
- PrintAndLog(" b sim ask/biphase");
- PrintAndLog(" m sim ask/manchester - Default");
- PrintAndLog(" r sim ask/raw");
- PrintAndLog(" s TBD- -to enable a gap between playback repetitions - default: no gap");
- PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
- return 0;
-}
-
-int usage_lf_simpsk(void)
-{
- //print help
- PrintAndLog("Usage: lf simpsk [1|2|3] [c <clock>] [i] [r <carrier>] [d <raw hex to sim>]");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
- PrintAndLog(" i invert data");
- PrintAndLog(" 1 set PSK1 (default)");
- PrintAndLog(" 2 set PSK2");
- PrintAndLog(" 3 set PSK3");
- PrintAndLog(" r <carrier> 2|4|8 are valid carriers: default = 2");
- PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
- return 0;
-}
-
// by marshmellow - sim ask data given clock, fcHigh, fcLow, invert
// - allow pull data from DemodBuffer
int CmdLFfskSim(const char *Cmd)
{
//might be able to autodetect FCs and clock from Graphbuffer if using demod buffer
// otherwise will need FChigh, FClow, Clock, and bitstream
- uint8_t fcHigh=0, fcLow=0, clk=0;
- uint8_t invert=0;
- bool errors = FALSE;
- char hexData[32] = {0x00}; // store entered hex data
- uint8_t data[255] = {0x00};
- int dataLen = 0;
- uint8_t cmdp = 0;
- while(param_getchar(Cmd, cmdp) != 0x00)
- {
- switch(param_getchar(Cmd, cmdp))
- {
- case 'h':
- return usage_lf_simfsk();
- case 'i':
- invert = 1;
- cmdp++;
- break;
- case 'c':
- errors |= param_getdec(Cmd,cmdp+1,&clk);
- cmdp+=2;
- break;
- case 'H':
- errors |= param_getdec(Cmd,cmdp+1,&fcHigh);
- cmdp+=2;
- break;
- case 'L':
- errors |= param_getdec(Cmd,cmdp+1,&fcLow);
- cmdp+=2;
- break;
- //case 's':
- // separator=1;
- // cmdp++;
- // break;
- case 'd':
- dataLen = param_getstr(Cmd, cmdp+1, hexData);
- if (dataLen==0) {
- errors=TRUE;
- } else {
- dataLen = hextobinarray((char *)data, hexData);
- }
- if (dataLen==0) errors=TRUE;
- if (errors) PrintAndLog ("Error getting hex data");
- cmdp+=2;
- break;
- default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
- errors = TRUE;
- break;
- }
- if(errors) break;
- }
- if(cmdp == 0 && DemodBufferLen == 0)
- {
- errors = TRUE;// No args
- }
-
- //Validations
- if(errors)
- {
- return usage_lf_simfsk();
- }
-
- if (dataLen == 0){ //using DemodBuffer
- if (clk==0 || fcHigh==0 || fcLow==0){ //manual settings must set them all
- uint8_t ans = fskClocks(&fcHigh, &fcLow, &clk, 0);
- if (ans==0){
- if (!fcHigh) fcHigh=10;
- if (!fcLow) fcLow=8;
- if (!clk) clk=50;
- }
- }
- } else {
- setDemodBuf(data, dataLen, 0);
- }
+ uint8_t fcHigh=0, fcLow=0, clk=0;
+ uint8_t invert=0;
+ bool errors = FALSE;
+ char hexData[32] = {0x00}; // store entered hex data
+ uint8_t data[255] = {0x00};
+ int dataLen = 0;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ return usage_lf_simfsk();
+ case 'i':
+ invert = 1;
+ cmdp++;
+ break;
+ case 'c':
+ errors |= param_getdec(Cmd,cmdp+1,&clk);
+ cmdp+=2;
+ break;
+ case 'H':
+ errors |= param_getdec(Cmd,cmdp+1,&fcHigh);
+ cmdp+=2;
+ break;
+ case 'L':
+ errors |= param_getdec(Cmd,cmdp+1,&fcLow);
+ cmdp+=2;
+ break;
+ //case 's':
+ // separator=1;
+ // cmdp++;
+ // break;
+ case 'd':
+ dataLen = param_getstr(Cmd, cmdp+1, hexData);
+ if (dataLen==0) {
+ errors=TRUE;
+ } else {
+ dataLen = hextobinarray((char *)data, hexData);
+ }
+ if (dataLen==0) errors=TRUE;
+ if (errors) PrintAndLog ("Error getting hex data");
+ cmdp+=2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = TRUE;
+ break;
+ }
+ if(errors) break;
+ }
+ if(cmdp == 0 && DemodBufferLen == 0)
+ {
+ errors = TRUE;// No args
+ }
+
+ //Validations
+ if(errors)
+ {
+ return usage_lf_simfsk();
+ }
+
+ if (dataLen == 0){ //using DemodBuffer
+ if (clk==0 || fcHigh==0 || fcLow==0){ //manual settings must set them all
+ uint8_t ans = fskClocks(&fcHigh, &fcLow, &clk, 0);
+ if (ans==0){
+ if (!fcHigh) fcHigh=10;
+ if (!fcLow) fcLow=8;
+ if (!clk) clk=50;
+ }
+ }
+ } else {
+ setDemodBuf(data, dataLen, 0);
+ }
//default if not found
- if (clk == 0) clk = 50;
- if (fcHigh == 0) fcHigh = 10;
- if (fcLow == 0) fcLow = 8;
-
- uint16_t arg1, arg2;
- arg1 = fcHigh << 8 | fcLow;
- arg2 = invert << 8 | clk;
- size_t size = DemodBufferLen;
- if (size > USB_CMD_DATA_SIZE) {
- PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
- size = USB_CMD_DATA_SIZE;
- }
- UsbCommand c = {CMD_FSK_SIM_TAG, {arg1, arg2, size}};
-
- memcpy(c.d.asBytes, DemodBuffer, size);
- SendCommand(&c);
- return 0;
+ if (clk == 0) clk = 50;
+ if (fcHigh == 0) fcHigh = 10;
+ if (fcLow == 0) fcLow = 8;
+
+ uint16_t arg1, arg2;
+ arg1 = fcHigh << 8 | fcLow;
+ arg2 = invert << 8 | clk;
+ size_t size = DemodBufferLen;
+ if (size > USB_CMD_DATA_SIZE) {
+ PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
+ size = USB_CMD_DATA_SIZE;
+ }
+ UsbCommand c = {CMD_FSK_SIM_TAG, {arg1, arg2, size}};
+
+ memcpy(c.d.asBytes, DemodBuffer, size);
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
// by marshmellow - sim ask data given clock, invert, manchester or raw, separator
{
//autodetect clock from Graphbuffer if using demod buffer
// needs clock, invert, manchester/raw as m or r, separator as s, and bitstream
- uint8_t encoding = 1, separator = 0;
- uint8_t clk=0, invert=0;
+ uint8_t encoding = 1, separator = 0, clk=0, invert=0;
bool errors = FALSE;
char hexData[32] = {0x00};
uint8_t data[255]= {0x00}; // store entered hex data
int dataLen = 0;
uint8_t cmdp = 0;
- while(param_getchar(Cmd, cmdp) != 0x00)
- {
- switch(param_getchar(Cmd, cmdp))
- {
- case 'h':
- return usage_lf_simask();
- case 'i':
- invert = 1;
- cmdp++;
- break;
- case 'c':
- errors |= param_getdec(Cmd,cmdp+1,&clk);
- cmdp+=2;
- break;
- case 'b':
- encoding=2; //biphase
- cmdp++;
- break;
- case 'm':
- encoding=1;
- cmdp++;
- break;
- case 'r':
- encoding=0;
- cmdp++;
- break;
- case 's':
- separator=1;
- cmdp++;
- break;
- case 'd':
- dataLen = param_getstr(Cmd, cmdp+1, hexData);
- if (dataLen==0) {
- errors=TRUE;
- } else {
- dataLen = hextobinarray((char *)data, hexData);
- }
- if (dataLen==0) errors=TRUE;
- if (errors) PrintAndLog ("Error getting hex data, datalen: %d",dataLen);
+
+ while(param_getchar(Cmd, cmdp) != 0x00) {
+ switch(param_getchar(Cmd, cmdp)) {
+ case 'h': return usage_lf_simask();
+ case 'i':
+ invert = 1;
+ cmdp++;
+ break;
+ case 'c':
+ errors |= param_getdec(Cmd,cmdp+1,&clk);
cmdp+=2;
- break;
- default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
- errors = TRUE;
- break;
+ break;
+ case 'b':
+ encoding=2; //biphase
+ cmdp++;
+ break;
+ case 'm':
+ encoding=1;
+ cmdp++;
+ break;
+ case 'r':
+ encoding=0;
+ cmdp++;
+ break;
+ case 's':
+ separator=1;
+ cmdp++;
+ break;
+ case 'd':
+ dataLen = param_getstr(Cmd, cmdp+1, hexData);
+ if (dataLen==0)
+ errors = TRUE;
+ else
+ dataLen = hextobinarray((char *)data, hexData);
+
+ if (dataLen==0) errors = TRUE;
+ if (errors) PrintAndLog ("Error getting hex data, datalen: %d", dataLen);
+ cmdp+=2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = TRUE;
+ break;
}
if(errors) break;
}
+
if(cmdp == 0 && DemodBufferLen == 0)
- {
errors = TRUE;// No args
- }
//Validations
- if(errors)
- {
- return usage_lf_simask();
- }
+ if(errors) return usage_lf_simask();
+
if (dataLen == 0){ //using DemodBuffer
- if (clk == 0) clk = GetAskClock("0", false, false);
+ if (clk == 0)
+ clk = GetAskClock("0", false, false);
} else {
setDemodBuf(data, dataLen, 0);
}
if (clk == 0) clk = 64;
if (encoding == 0) clk = clk/2; //askraw needs to double the clock speed
- uint16_t arg1, arg2;
- size_t size=DemodBufferLen;
- arg1 = clk << 8 | encoding;
- arg2 = invert << 8 | separator;
+
+ size_t size = DemodBufferLen;
+
if (size > USB_CMD_DATA_SIZE) {
PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
size = USB_CMD_DATA_SIZE;
}
+
+ PrintAndLog("preparing to sim ask data: %d bits", size);
+
+ uint16_t arg1, arg2;
+ arg1 = clk << 8 | encoding;
+ arg2 = invert << 8 | separator;
+
UsbCommand c = {CMD_ASK_SIM_TAG, {arg1, arg2, size}};
- PrintAndLog("preparing to sim ask data: %d bits", size);
memcpy(c.d.asBytes, DemodBuffer, size);
+ clearCommandBuffer();
SendCommand(&c);
return 0;
}
// - allow pull data from DemodBuffer or parameters
int CmdLFpskSim(const char *Cmd)
{
- //might be able to autodetect FC and clock from Graphbuffer if using demod buffer
- //will need carrier, Clock, and bitstream
- uint8_t carrier=0, clk=0;
- uint8_t invert=0;
- bool errors = FALSE;
- char hexData[32] = {0x00}; // store entered hex data
- uint8_t data[255] = {0x00};
- int dataLen = 0;
- uint8_t cmdp = 0;
- uint8_t pskType = 1;
- while(param_getchar(Cmd, cmdp) != 0x00)
- {
- switch(param_getchar(Cmd, cmdp))
- {
- case 'h':
- return usage_lf_simpsk();
- case 'i':
- invert = 1;
- cmdp++;
- break;
- case 'c':
- errors |= param_getdec(Cmd,cmdp+1,&clk);
- cmdp+=2;
- break;
- case 'r':
- errors |= param_getdec(Cmd,cmdp+1,&carrier);
- cmdp+=2;
- break;
- case '1':
- pskType=1;
- cmdp++;
- break;
- case '2':
- pskType=2;
- cmdp++;
- break;
- case '3':
- pskType=3;
- cmdp++;
- break;
- case 'd':
- dataLen = param_getstr(Cmd, cmdp+1, hexData);
- if (dataLen==0) {
- errors=TRUE;
- } else {
- dataLen = hextobinarray((char *)data, hexData);
- }
- if (dataLen==0) errors=TRUE;
- if (errors) PrintAndLog ("Error getting hex data");
- cmdp+=2;
- break;
- default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
- errors = TRUE;
- break;
- }
- if (errors) break;
- }
- if (cmdp == 0 && DemodBufferLen == 0)
- {
- errors = TRUE;// No args
- }
-
- //Validations
- if (errors)
- {
- return usage_lf_simpsk();
- }
- if (dataLen == 0){ //using DemodBuffer
- PrintAndLog("Getting Clocks");
- if (clk==0) clk = GetPskClock("", FALSE, FALSE);
- PrintAndLog("clk: %d",clk);
- if (!carrier) carrier = GetPskCarrier("", FALSE, FALSE);
- PrintAndLog("carrier: %d", carrier);
- } else {
- setDemodBuf(data, dataLen, 0);
- }
-
- if (clk <= 0) clk = 32;
- if (carrier == 0) carrier = 2;
- if (pskType != 1){
- if (pskType == 2){
- //need to convert psk2 to psk1 data before sim
- psk2TOpsk1(DemodBuffer, DemodBufferLen);
- } else {
- PrintAndLog("Sorry, PSK3 not yet available");
- }
- }
- uint16_t arg1, arg2;
- arg1 = clk << 8 | carrier;
- arg2 = invert;
- size_t size=DemodBufferLen;
- if (size > USB_CMD_DATA_SIZE) {
- PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
- size=USB_CMD_DATA_SIZE;
- }
- UsbCommand c = {CMD_PSK_SIM_TAG, {arg1, arg2, size}};
- PrintAndLog("DEBUG: Sending DemodBuffer Length: %d", size);
- memcpy(c.d.asBytes, DemodBuffer, size);
- SendCommand(&c);
-
- return 0;
+ //might be able to autodetect FC and clock from Graphbuffer if using demod buffer
+ //will need carrier, Clock, and bitstream
+ uint8_t carrier=0, clk=0;
+ uint8_t invert=0;
+ bool errors = FALSE;
+ char hexData[32] = {0x00}; // store entered hex data
+ uint8_t data[255] = {0x00};
+ int dataLen = 0;
+ uint8_t cmdp = 0;
+ uint8_t pskType = 1;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ return usage_lf_simpsk();
+ case 'i':
+ invert = 1;
+ cmdp++;
+ break;
+ case 'c':
+ errors |= param_getdec(Cmd,cmdp+1,&clk);
+ cmdp+=2;
+ break;
+ case 'r':
+ errors |= param_getdec(Cmd,cmdp+1,&carrier);
+ cmdp+=2;
+ break;
+ case '1':
+ pskType=1;
+ cmdp++;
+ break;
+ case '2':
+ pskType=2;
+ cmdp++;
+ break;
+ case '3':
+ pskType=3;
+ cmdp++;
+ break;
+ case 'd':
+ dataLen = param_getstr(Cmd, cmdp+1, hexData);
+ if (dataLen==0) {
+ errors=TRUE;
+ } else {
+ dataLen = hextobinarray((char *)data, hexData);
+ }
+ if (dataLen==0) errors=TRUE;
+ if (errors) PrintAndLog ("Error getting hex data");
+ cmdp+=2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = TRUE;
+ break;
+ }
+ if (errors) break;
+ }
+ if (cmdp == 0 && DemodBufferLen == 0)
+ {
+ errors = TRUE;// No args
+ }
+
+ //Validations
+ if (errors)
+ {
+ return usage_lf_simpsk();
+ }
+ if (dataLen == 0){ //using DemodBuffer
+ PrintAndLog("Getting Clocks");
+ if (clk==0) clk = GetPskClock("", FALSE, FALSE);
+ PrintAndLog("clk: %d",clk);
+ if (!carrier) carrier = GetPskCarrier("", FALSE, FALSE);
+ PrintAndLog("carrier: %d", carrier);
+ } else {
+ setDemodBuf(data, dataLen, 0);
+ }
+
+ if (clk <= 0) clk = 32;
+ if (carrier == 0) carrier = 2;
+ if (pskType != 1){
+ if (pskType == 2){
+ //need to convert psk2 to psk1 data before sim
+ psk2TOpsk1(DemodBuffer, DemodBufferLen);
+ } else {
+ PrintAndLog("Sorry, PSK3 not yet available");
+ }
+ }
+ uint16_t arg1, arg2;
+ arg1 = clk << 8 | carrier;
+ arg2 = invert;
+ size_t size=DemodBufferLen;
+ if (size > USB_CMD_DATA_SIZE) {
+ PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
+ size=USB_CMD_DATA_SIZE;
+ }
+ UsbCommand c = {CMD_PSK_SIM_TAG, {arg1, arg2, size}};
+ PrintAndLog("DEBUG: Sending DemodBuffer Length: %d", size);
+ memcpy(c.d.asBytes, DemodBuffer, size);
+ clearCommandBuffer();
+ SendCommand(&c);
+
+ return 0;
}
int CmdLFSimBidir(const char *Cmd)
{
- // Set ADC to twice the carrier for a slight supersampling
- // HACK: not implemented in ARMSRC.
- PrintAndLog("Not implemented yet.");
- UsbCommand c = {CMD_LF_SIMULATE_BIDIR, {47, 384, 0}};
- SendCommand(&c);
- return 0;
+ // Set ADC to twice the carrier for a slight supersampling
+ // HACK: not implemented in ARMSRC.
+ PrintAndLog("Not implemented yet.");
+ UsbCommand c = {CMD_LF_SIMULATE_BIDIR, {47, 384, 0}};
+ SendCommand(&c);
+ return 0;
}
int CmdVchDemod(const char *Cmd)
{
- // Is this the entire sync pattern, or does this also include some
- // data bits that happen to be the same everywhere? That would be
- // lovely to know.
- static const int SyncPattern[] = {
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- };
-
- // So first, we correlate for the sync pattern, and mark that.
- int bestCorrel = 0, bestPos = 0;
- int i;
- // It does us no good to find the sync pattern, with fewer than
- // 2048 samples after it...
- for (i = 0; i < (GraphTraceLen-2048); i++) {
- int sum = 0;
- int j;
- for (j = 0; j < arraylen(SyncPattern); j++) {
- sum += GraphBuffer[i+j]*SyncPattern[j];
- }
- if (sum > bestCorrel) {
- bestCorrel = sum;
- bestPos = i;
- }
- }
- PrintAndLog("best sync at %d [metric %d]", bestPos, bestCorrel);
-
- char bits[257];
- bits[256] = '\0';
-
- int worst = INT_MAX;
- int worstPos = 0;
-
- for (i = 0; i < 2048; i += 8) {
- int sum = 0;
- int j;
- for (j = 0; j < 8; j++) {
- sum += GraphBuffer[bestPos+i+j];
- }
- if (sum < 0) {
- bits[i/8] = '.';
- } else {
- bits[i/8] = '1';
- }
- if(abs(sum) < worst) {
- worst = abs(sum);
- worstPos = i;
- }
- }
- PrintAndLog("bits:");
- PrintAndLog("%s", bits);
- PrintAndLog("worst metric: %d at pos %d", worst, worstPos);
-
- if (strcmp(Cmd, "clone")==0) {
- GraphTraceLen = 0;
- char *s;
- for(s = bits; *s; s++) {
- int j;
- for(j = 0; j < 16; j++) {
- GraphBuffer[GraphTraceLen++] = (*s == '1') ? 1 : 0;
- }
- }
- RepaintGraphWindow();
- }
- return 0;
+ // Is this the entire sync pattern, or does this also include some
+ // data bits that happen to be the same everywhere? That would be
+ // lovely to know.
+ static const int SyncPattern[] = {
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ };
+
+ // So first, we correlate for the sync pattern, and mark that.
+ int bestCorrel = 0, bestPos = 0;
+ int i;
+ // It does us no good to find the sync pattern, with fewer than
+ // 2048 samples after it...
+ for (i = 0; i < (GraphTraceLen-2048); i++) {
+ int sum = 0;
+ int j;
+ for (j = 0; j < arraylen(SyncPattern); j++) {
+ sum += GraphBuffer[i+j]*SyncPattern[j];
+ }
+ if (sum > bestCorrel) {
+ bestCorrel = sum;
+ bestPos = i;
+ }
+ }
+ PrintAndLog("best sync at %d [metric %d]", bestPos, bestCorrel);
+
+ char bits[257];
+ bits[256] = '\0';
+
+ int worst = INT_MAX;
+ int worstPos = 0;
+
+ for (i = 0; i < 2048; i += 8) {
+ int sum = 0;
+ int j;
+ for (j = 0; j < 8; j++) {
+ sum += GraphBuffer[bestPos+i+j];
+ }
+ if (sum < 0) {
+ bits[i/8] = '.';
+ } else {
+ bits[i/8] = '1';
+ }
+ if(abs(sum) < worst) {
+ worst = abs(sum);
+ worstPos = i;
+ }
+ }
+ PrintAndLog("bits:");
+ PrintAndLog("%s", bits);
+ PrintAndLog("worst metric: %d at pos %d", worst, worstPos);
+
+ if (strcmp(Cmd, "clone")==0) {
+ GraphTraceLen = 0;
+ char *s;
+ for(s = bits; *s; s++) {
+ int j;
+ for(j = 0; j < 16; j++) {
+ GraphBuffer[GraphTraceLen++] = (*s == '1') ? 1 : 0;
+ }
+ }
+ RepaintGraphWindow();
+ }
+ return 0;
}
//by marshmellow
-int CmdLFfind(const char *Cmd)
-{
- int ans=0;
+int CmdLFfind(const char *Cmd) {
+ int ans = 0;
char cmdp = param_getchar(Cmd, 0);
char testRaw = param_getchar(Cmd, 1);
- if (strlen(Cmd) > 3 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: lf search <0|1> [u]");
- PrintAndLog(" <use data from Graphbuffer> , if not set, try reading data from tag.");
- PrintAndLog(" [Search for Unknown tags] , if not set, reads only known tags.");
- PrintAndLog("");
- PrintAndLog(" sample: lf search = try reading data from tag & search for known tags");
- PrintAndLog(" : lf search 1 = use data from GraphBuffer & search for known tags");
- PrintAndLog(" : lf search u = try reading data from tag & search for known and unknown tags");
- PrintAndLog(" : lf search 1 u = use data from GraphBuffer & search for known and unknown tags");
-
- return 0;
- }
+ if (strlen(Cmd) > 3 || cmdp == 'h' || cmdp == 'H') return usage_lf_find();
if (!offline && (cmdp != '1')){
CmdLFRead("s");
ans=CmdFSKdemodIO("");
if (ans>0) {
- PrintAndLog("\nValid IO Prox ID Found!");
- return 1;
+ PrintAndLog("\nValid IO Prox ID Found!");
+ return 1;
}
ans=CmdFSKdemodPyramid("");
if (ans>0) {
- PrintAndLog("\nValid Pyramid ID Found!");
- return 1;
+ PrintAndLog("\nValid Pyramid ID Found!");
+ return 1;
}
ans=CmdFSKdemodParadox("");
if (ans>0) {
- PrintAndLog("\nValid Paradox ID Found!");
- return 1;
+ PrintAndLog("\nValid Paradox ID Found!");
+ return 1;
}
ans=CmdFSKdemodAWID("");
if (ans>0) {
- PrintAndLog("\nValid AWID ID Found!");
- return 1;
+ PrintAndLog("\nValid AWID ID Found!");
+ return 1;
}
ans=CmdFSKdemodHID("");
if (ans>0) {
- PrintAndLog("\nValid HID Prox ID Found!");
- return 1;
- }
-
- //add psk and indala
- ans=CmdIndalaDecode("");
- if (ans>0) {
- PrintAndLog("\nValid Indala ID Found!");
- return 1;
+ PrintAndLog("\nValid HID Prox ID Found!");
+ return 1;
}
ans=CmdAskEM410xDemod("");
if (ans>0) {
- PrintAndLog("\nValid EM410x ID Found!");
- return 1;
+ PrintAndLog("\nValid EM410x ID Found!");
+ return 1;
}
ans=CmdG_Prox_II_Demod("");
if (ans>0) {
- PrintAndLog("\nValid G Prox II ID Found!");
- return 1;
+ PrintAndLog("\nValid Guardall G-Prox II ID Found!");
+ return 1;
}
ans=CmdFDXBdemodBI("");
return 1;
}
+ ans=CmdVikingDemod("");
+ if (ans>0) {
+ PrintAndLog("\nValid Viking ID Found!");
+ return 1;
+ }
+
+ ans=CmdIndalaDecode("");
+ if (ans>0) {
+ PrintAndLog("\nValid Indala ID Found!");
+ return 1;
+ }
+
ans=CmdPSKNexWatch("");
if (ans>0) {
PrintAndLog("\nValid NexWatch ID Found!");
return 1;
}
+ ans=CmdLFNedapDemod("");
+ if (ans>0) {
+ PrintAndLog("\nValid NEDAP ID Found!");
+ return 1;
+ }
+ // TIdemod?
+
PrintAndLog("\nNo Known Tags Found!\n");
if (testRaw=='u' || testRaw=='U'){
//test unknown tag formats (raw mode)
PrintAndLog("\nChecking for Unknown tags:\n");
ans=AutoCorrelate(4000, FALSE, FALSE);
- if (ans > 0) PrintAndLog("Possible Auto Correlation of %d repeating samples",ans);
+
+ if (ans > 0) {
+
+ PrintAndLog("Possible Auto Correlation of %d repeating samples",ans);
+
+ if ( ans % 8 == 0) {
+ int bytes = (ans / 8);
+ PrintAndLog("Possible %d bytes", bytes);
+ int blocks = 0;
+ if ( bytes % 2 == 0) {
+ blocks = (bytes / 2);
+ PrintAndLog("Possible 2 blocks, width %d", blocks);
+ }
+ if ( bytes % 4 == 0) {
+ blocks = (bytes / 4);
+ PrintAndLog("Possible 4 blocks, width %d", blocks);
+ }
+ if ( bytes % 8 == 0) {
+ blocks = (bytes / 8);
+ PrintAndLog("Possible 8 blocks, width %d", blocks);
+ }
+ if ( bytes % 16 == 0) {
+ blocks = (bytes / 16);
+ PrintAndLog("Possible 16 blocks, width %d", blocks);
+ }
+ }
+ }
+
ans=GetFskClock("",FALSE,FALSE);
if (ans != 0){ //fsk
ans=FSKrawDemod("",TRUE);
return 1;
}
}
- ans=ASKDemod("0 0 0",TRUE,FALSE,1);
+ bool st = TRUE;
+ ans=ASKDemod_ext("0 0 0",TRUE,FALSE,1,&st);
if (ans>0) {
- PrintAndLog("\nUnknown ASK Modulated and Manchester encoded Tag Found!");
- PrintAndLog("\nif it does not look right it could instead be ASK/Biphase - try 'data rawdemod ab'");
- return 1;
+ PrintAndLog("\nUnknown ASK Modulated and Manchester encoded Tag Found!");
+ PrintAndLog("\nif it does not look right it could instead be ASK/Biphase - try 'data rawdemod ab'");
+ return 1;
}
+
ans=CmdPSK1rawDemod("");
if (ans>0) {
PrintAndLog("Possible unknown PSK1 Modulated Tag Found above!\n\nCould also be PSK2 - try 'data rawdemod p2'");
static command_t CommandTable[] =
{
{"help", CmdHelp, 1, "This help"},
- {"cmdread", CmdLFCommandRead, 0, "<off period> <'0' period> <'1' period> <command> ['h'] -- Modulate LF reader field to send command before read (all periods in microseconds) (option 'h' for 134)"},
+ {"awid", CmdLFAWID, 1, "{ AWID RFIDs... }"},
{"em4x", CmdLFEM4X, 1, "{ EM4X RFIDs... }"},
+ {"guard", CmdLFGuard, 1, "{ Guardall RFIDs... }"},
+ {"hid", CmdLFHID, 1, "{ HID RFIDs... }"},
+ {"hitag", CmdLFHitag, 1, "{ HITAG RFIDs... }"},
+ {"io", CmdLFIO, 1, "{ IOPROX RFIDs... }"},
+ {"nedap", CmdLFNedap, 1, "{ NEDAP RFIDs... }"},
+ {"pcf7931", CmdLFPCF7931, 1, "{ PCF7931 RFIDs... }"},
+ {"presco", CmdLFPresco, 1, "{ Presco RFIDs... }"},
+ {"pyramid", CmdLFPyramid, 1, "{ Farpointe/Pyramid RFIDs... }"},
+ {"ti", CmdLFTI, 1, "{ TI RFIDs... }"},
+ {"t55xx", CmdLFT55XX, 1, "{ T55xx RFIDs... }"},
+ {"viking", CmdLFViking, 1, "{ Viking RFIDs... }"},
{"config", CmdLFSetConfig, 0, "Set config for LF sampling, bit/sample, decimation, frequency"},
+ {"cmdread", CmdLFCommandRead, 0, "<off period> <'0' period> <'1' period> <command> ['h' 134] \n\t\t-- Modulate LF reader field to send command before read (all periods in microseconds)"},
{"flexdemod", CmdFlexdemod, 1, "Demodulate samples for FlexPass"},
- {"hid", CmdLFHID, 1, "{ HID RFIDs... }"},
- {"io", CmdLFIO, 1, "{ ioProx tags... }"},
{"indalademod", CmdIndalaDemod, 1, "['224'] -- Demodulate samples for Indala 64 bit UID (option '224' for 224 bit)"},
{"indalaclone", CmdIndalaClone, 0, "<UID> ['l']-- Clone Indala to T55x7 (tag must be in antenna)(UID in HEX)(option 'l' for 224 UID"},
{"read", CmdLFRead, 0, "['s' silent] Read 125/134 kHz LF ID-only tag. Do 'lf read h' for help"},
- {"search", CmdLFfind, 1, "[offline] ['u'] Read and Search for valid known tag (in offline mode it you can load first then search) - 'u' to search for unknown tags"},
+ {"search", CmdLFfind, 1, "[offline] ['u'] Read and Search for valid known tag (in offline mode it you can load first then search) \n\t\t-- 'u' to search for unknown tags"},
{"sim", CmdLFSim, 0, "[GAP] -- Simulate LF tag from buffer with optional GAP (in microseconds)"},
- {"simask", CmdLFaskSim, 0, "[clock] [invert <1|0>] [manchester/raw <'m'|'r'>] [msg separator 's'] [d <hexdata>] -- Simulate LF ASK tag from demodbuffer or input"},
- {"simfsk", CmdLFfskSim, 0, "[c <clock>] [i] [H <fcHigh>] [L <fcLow>] [d <hexdata>] -- Simulate LF FSK tag from demodbuffer or input"},
- {"simpsk", CmdLFpskSim, 0, "[1|2|3] [c <clock>] [i] [r <carrier>] [d <raw hex to sim>] -- Simulate LF PSK tag from demodbuffer or input"},
+ {"simask", CmdLFaskSim, 0, "[clock] [invert <1|0>] [biphase/manchester/raw <'b'|'m'|'r'>] [msg separator 's'] [d <hexdata>] \n\t\t-- Simulate LF ASK tag from demodbuffer or input"},
+ {"simfsk", CmdLFfskSim, 0, "[c <clock>] [i] [H <fcHigh>] [L <fcLow>] [d <hexdata>] \n\t\t-- Simulate LF FSK tag from demodbuffer or input"},
+ {"simpsk", CmdLFpskSim, 0, "[1|2|3] [c <clock>] [i] [r <carrier>] [d <raw hex to sim>] \n\t\t-- Simulate LF PSK tag from demodbuffer or input"},
{"simbidir", CmdLFSimBidir, 0, "Simulate LF tag (with bidirectional data transmission between reader and tag)"},
{"snoop", CmdLFSnoop, 0, "['l'|'h'|<divisor>] [trigger threshold]-- Snoop LF (l:125khz, h:134khz)"},
- {"ti", CmdLFTI, 1, "{ TI RFIDs... }"},
- {"hitag", CmdLFHitag, 1, "{ Hitag tags and transponders... }"},
{"vchdemod", CmdVchDemod, 1, "['clone'] -- Demodulate samples for VeriChip"},
- {"t55xx", CmdLFT55XX, 1, "{ T55xx RFIDs... }"},
- {"pcf7931", CmdLFPCF7931, 1, "{PCF7931 RFIDs...}"},
{NULL, NULL, 0, NULL}
};
-int CmdLF(const char *Cmd)
-{
+int CmdLF(const char *Cmd) {
+ clearCommandBuffer();
CmdsParse(CommandTable, Cmd);
return 0;
}
-int CmdHelp(const char *Cmd)
-{
+int CmdHelp(const char *Cmd) {
CmdsHelp(CommandTable);
return 0;
}
projects / proxmark3-svn / blobdiff