#ifndef PROTOCOLS_H
#define PROTOCOLS_H
+#include <stdint.h>
+
+
//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
/*
ISO14443A (usually NFC tags)
#define ICLASS_CMD_PAGESEL 0x84
#define ICLASS_CMD_READCHECK_KD 0x88
#define ICLASS_CMD_READCHECK_KC 0x18
-#define ICLASS_CMD_CHECK 0x05
+#define ICLASS_CMD_CHECK_KC 0x95
+#define ICLASS_CMD_CHECK_KD 0x05
#define ICLASS_CMD_DETECT 0x0F
#define ICLASS_CMD_HALT 0x00
#define ICLASS_CMD_UPDATE 0x87
#define ISO14443A_CMD_REQA 0x26
-#define ISO14443A_CMD_READBLOCK 0x30
#define ISO14443A_CMD_WUPA 0x52
#define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97
-#define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ?
#define ISO14443A_CMD_HALT 0x50
#define ISO14443A_CMD_RATS 0xE0
-#define MIFARE_AUTH_KEYA 0x60
-#define MIFARE_AUTH_KEYB 0x61
-#define MIFARE_MAGICWUPC1 0x40
-#define MIFARE_MAGICWUPC2 0x43
-#define MIFARE_MAGICWIPEC 0x41
-#define MIFARE_CMD_INC 0xC0
-#define MIFARE_CMD_DEC 0xC1
-#define MIFARE_CMD_RESTORE 0xC2
-#define MIFARE_CMD_TRANSFER 0xB0
-
-#define MIFARE_EV1_PERSONAL_UID 0x40
-#define MIFARE_EV1_SETMODE 0x43
-
-
-#define MIFARE_ULC_WRITE 0xA2
-//#define MIFARE_ULC__COMP_WRITE 0xA0
-#define MIFARE_ULC_AUTH_1 0x1A
-#define MIFARE_ULC_AUTH_2 0xAF
-
-#define MIFARE_ULEV1_AUTH 0x1B
-#define MIFARE_ULEV1_VERSION 0x60
-#define MIFARE_ULEV1_FASTREAD 0x3A
-//#define MIFARE_ULEV1_WRITE 0xA2
-//#define MIFARE_ULEV1_COMP_WRITE 0xA0
-#define MIFARE_ULEV1_READ_CNT 0x39
-#define MIFARE_ULEV1_INCR_CNT 0xA5
-#define MIFARE_ULEV1_READSIG 0x3C
-#define MIFARE_ULEV1_CHECKTEAR 0x3E
-#define MIFARE_ULEV1_VCSL 0x4B
+#define MIFARE_CMD_READBLOCK 0x30
+#define MIFARE_CMD_WRITEBLOCK 0xA0
+#define MIFARE_AUTH_KEYA 0x60
+#define MIFARE_AUTH_KEYB 0x61
+#define MIFARE_MAGICWUPC1 0x40
+#define MIFARE_MAGICWUPC2 0x43
+#define MIFARE_MAGICWIPEC 0x41
+#define MIFARE_CMD_INC 0xC0
+#define MIFARE_CMD_DEC 0xC1
+#define MIFARE_CMD_RESTORE 0xC2
+#define MIFARE_CMD_TRANSFER 0xB0
+
+#define MIFARE_EV1_PERSONAL_UID 0x40
+#define MIFARE_EV1_UIDF0 0x00
+#define MIFARE_EV1_UIDF1 0x40
+#define MIFARE_EV1_UIDF2 0x20
+#define MIFARE_EV1_UIDF3 0x60
+#define MIFARE_EV1_SETMODE 0x43
+
+#define MIFARE_ULC_WRITE 0xA2
+#define MIFARE_ULC_COMP_WRITE MIFARE_CMD_WRITEBLOCK
+#define MIFARE_ULC_AUTH_1 0x1A
+#define MIFARE_ULC_AUTH_2 0xAF
+
+#define MIFARE_ULEV1_AUTH 0x1B
+#define MIFARE_ULEV1_VERSION 0x60
+#define MIFARE_ULEV1_FASTREAD 0x3A
+#define MIFARE_ULEV1_WRITE 0xA2
+#define MIFARE_ULEV1_COMP_WRITE MIFARE_CMD_WRITEBLOCK
+#define MIFARE_ULEV1_READ_CNT 0x39
+#define MIFARE_ULEV1_INCR_CNT 0xA5
+#define MIFARE_ULEV1_READSIG 0x3C
+#define MIFARE_ULEV1_CHECKTEAR 0x3E
+#define MIFARE_ULEV1_VCSL 0x4B
+
+// mifare 4bit card answers
+#define CARD_ACK 0x0A // 1010 - ACK
+#define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed)
+#define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error
+
/**
06 00 = INITIATE
#define ISO14443B_COMPLETION 0x0F
#define ISO14443B_AUTHENTICATE 0x0A
-//First byte is 26
-#define ISO15693_INVENTORY 0x01
-#define ISO15693_STAYQUIET 0x02
-//First byte is 02
-#define ISO15693_READBLOCK 0x20
-#define ISO15693_WRITEBLOCK 0x21
-#define ISO15693_LOCKBLOCK 0x22
-#define ISO15693_READ_MULTI_BLOCK 0x23
-#define ISO15693_SELECT 0x25
-#define ISO15693_RESET_TO_READY 0x26
-#define ISO15693_WRITE_AFI 0x27
-#define ISO15693_LOCK_AFI 0x28
-#define ISO15693_WRITE_DSFID 0x29
-#define ISO15693_LOCK_DSFID 0x2A
-#define ISO15693_GET_SYSTEM_INFO 0x2B
-#define ISO15693_READ_MULTI_SECSTATUS 0x2C
+// ISO15693 COMMANDS
+#define ISO15693_INVENTORY 0x01
+#define ISO15693_STAYQUIET 0x02
+#define ISO15693_READBLOCK 0x20
+#define ISO15693_WRITEBLOCK 0x21
+#define ISO15693_LOCKBLOCK 0x22
+#define ISO15693_READ_MULTI_BLOCK 0x23
+#define ISO15693_WRITE_MULTI_BLOCK 0x24
+#define ISO15693_SELECT 0x25
+#define ISO15693_RESET_TO_READY 0x26
+#define ISO15693_WRITE_AFI 0x27
+#define ISO15693_LOCK_AFI 0x28
+#define ISO15693_WRITE_DSFID 0x29
+#define ISO15693_LOCK_DSFID 0x2A
+#define ISO15693_GET_SYSTEM_INFO 0x2B
+#define ISO15693_READ_MULTI_SECSTATUS 0x2C
+
+// ISO15693 REQUEST FLAGS
+#define ISO15693_REQ_SUBCARRIER_TWO (1<<0)
+#define ISO15693_REQ_DATARATE_HIGH (1<<1)
+#define ISO15693_REQ_INVENTORY (1<<2)
+#define ISO15693_REQ_PROTOCOL_EXT (1<<3) // RFU
+#define ISO15693_REQ_OPTION (1<<6) // Command specific option selector
+// when REQ_INVENTORY is not set
+#define ISO15693_REQ_SELECT (1<<4) // only selected cards response
+#define ISO15693_REQ_ADDRESS (1<<5) // this req contains an address
+// when REQ_INVENTORY is set
+#define ISO15693_REQINV_AFI (1<<4) // AFI Field is present
+#define ISO15693_REQINV_SLOT1 (1<<5) // 1 Slot (16 slots if not set)
+
+// ISO15693 RESPONSE FLAGS
+#define ISO15693_RES_ERROR (1<<0)
+#define ISO15693_RES_EXT (1<<3) // Protocol Extention
+
+// ISO15693 RESPONSE ERROR CODES
+#define ISO15693_NOERROR 0x00
+#define ISO15693_ERROR_CMD_NOT_SUP 0x01 // Command not supported
+#define ISO15693_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error)
+#define ISO15693_ERROR_CMD_OPTION 0x03 // Command option not supported
+#define ISO15693_ERROR_GENERIC 0x0F // No additional Info about this error
+#define ISO15693_ERROR_BLOCK_UNAVAILABLE 0x10
+#define ISO15693_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again
+#define ISO15693_ERROR_BLOCK_LOCKED 0x12 // cannot be changed
+#define ISO15693_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful
+#define ISO15693_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful
// Topaz command set:
#define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes)
#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
+// HITAG1 commands
+#define HITAG1_SET_CCNEW 0xC2 // left 5 bits only
+#define HITAG1_READ_ID 0x00 // not a real command, consists of 5 bits length, <length> bits partial SN, 8 bits CRC
+#define HITAG1_SELECT 0x00 // left 5 bits only, followed by 32 bits SN and 8 bits CRC
+#define HITAG1_WRPPAGE 0x80 // left 4 bits only, followed by 8 bits page and 8 bits CRC
+#define HITAG1_WRPBLK 0x90 // left 4 bits only, followed by 8 bits block and 8 bits CRC
+#define HITAG1_WRCPAGE 0xA0 // left 4 bits only, followed by 8 bits page or key information and 8 bits CRC
+#define HITAG1_WRCBLK 0xB0 // left 4 bits only, followed by 8 bits block and 8 bits CRC
+#define HITAG1_RDPPAGE 0xC0 // left 4 bits only, followed by 8 bits page and 8 bits CRC
+#define HITAG1_RDPBLK 0xD0 // left 4 bits only, followed by 8 bits block and 8 bits CRC
+#define HITAG1_RDCPAGE 0xE0 // left 4 bits only, followed by 8 bits page and 8 bits CRC
+#define HITAG1_RDCBLK 0xF0 // left 4 bits only, followed by 8 bits block and 8 bits CRC
+#define HITAG1_HALT 0x70 // left 4 bits only, followed by 8 bits (dummy) page and 8 bits CRC
+
+// HITAG2 commands
+#define HITAG2_START_AUTH 0xC0 // left 5 bits only
+#define HITAG2_READ_PAGE 0xC0 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits
+#define HITAG2_READ_PAGE_INVERTED 0x44 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits
+#define HITAG2_WRITE_PAGE 0x82 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits
+#define HITAG2_HALT 0x00 // left 5 bits only
#define ISO_14443A 0
#define ICLASS 1
#define TOPAZ 3
#define PROTO_MIFARE 4
#define ISO_7816_4 5
+#define ISO_15693 6
+#define ISO_14443_4 7
+
//-- Picopass fuses
#define FUSE_FPERS 0x80
#define FUSE_RA 0x01
// ISO 7816-4 Basic interindustry commands. For command APDU's.
-#define ISO7816_READ_BINARY 0xB0
-#define ISO7816_WRITE_BINARY 0xD0
-#define ISO7816_UPDATE_BINARY 0xD6
#define ISO7816_ERASE_BINARY 0x0E
+#define ISO7816_VERIFY 0x20
+#define ISO7816_MANAGE_CHANNEL 0x70
+#define ISO7816_EXTERNAL_AUTHENTICATE 0x82
+#define ISO7816_GET_CHALLENGE 0x84
+#define ISO7816_INTERNAL_AUTHENTICATE 0x88
+#define ISO7816_SELECT_FILE 0xA4
+#define ISO7816_GET_PROCESSING_OPTIONS 0xA8
+#define ISO7816_READ_BINARY 0xB0
#define ISO7816_READ_RECORDS 0xB2
-#define ISO7816_WRITE_RECORDS 0xD2
-#define ISO7816_APPEND_RECORD 0xE2
-#define ISO7816_UPDATE_RECORD 0xDC
+#define ISO7816_GET_RESPONSE 0xC0
+#define ISO7816_ENVELOPE 0xC2
#define ISO7816_GET_DATA 0xCA
+#define ISO7816_WRITE_BINARY 0xD0
+#define ISO7816_WRITE_RECORD 0xD2
+#define ISO7816_UPDATE_BINARY 0xD6
#define ISO7816_PUT_DATA 0xDA
-#define ISO7816_SELECT_FILE 0xA4
-#define ISO7816_VERIFY 0x20
-#define ISO7816_INTERNAL_AUTHENTICATION 0x88
-#define ISO7816_EXTERNAL_AUTHENTICATION 0x82
-#define ISO7816_GET_CHALLENGE 0xB4
-#define ISO7816_MANAGE_CHANNEL 0x70
+#define ISO7816_UPDATE_DATA 0xDC
+#define ISO7816_APPEND_RECORD 0xE2
// ISO7816-4 For response APDU's
#define ISO7816_OK 0x9000
// 6x xx = ERROR
+#define ISO7816_MAX_FRAME_SIZE 261
-
-void printIclassDumpInfo(uint8_t* iclass_dump);
-void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
-
/* T55x7 configuration register definitions */
#define T55x7_POR_DELAY 0x00000001
#define T55x7_ST_TERMINATOR 0x00000008