Update README.md

[proxmark3-svn] / common / protocols.h

diff --git a/common/protocols.h b/common/protocols.h
index d20c95fc29c51a8e033f0d6eb4a134fbb3d4a202..ba3a9a90363a523fc746d9044f278b9143895cea 100644 (file)
--- a/common/protocols.h
+++ b/common/protocols.h
@@ -134,6 +134,7 @@ ISO 7816-4 Basic interindustry commands. For command APDU's.
 #define ISO14443A_CMD_WUPA       0x52
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
+#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3   0x97
 #define ISO14443A_CMD_WRITEBLOCK 0xA0
 #define ISO14443A_CMD_HALT       0x50
 #define ISO14443A_CMD_RATS       0xE0
@@ -151,7 +152,6 @@ ISO 7816-4 Basic interindustry commands. For command APDU's.
 #define MIFARE_EV1_PERSONAL_UID 0x40
 #define MIFARE_EV1_SETMODE             0x43
 
-
 #define MIFARE_ULC_WRITE        0xA2
 //#define MIFARE_ULC__COMP_WRITE  0xA0
 #define MIFARE_ULC_AUTH_1       0x1A
@@ -166,7 +166,27 @@ ISO 7816-4 Basic interindustry commands. For command APDU's.
 #define MIFARE_ULEV1_CHECKTEAR 0x3E
 #define MIFARE_ULEV1_VCSL              0x4B
 
-
+// mifare 4bit card answers
+#define CARD_ACK      0x0A  // 1010 - ACK
+#define CARD_NACK_NA  0x04  // 0100 - NACK, not allowed (command not allowed)
+#define CARD_NACK_TR  0x05  // 0101 - NACK, transmission error
+
+
+// Magic Generation 1, parameter "work flags"
+// bit 0 - need get UID
+// bit 1 - send wupC (wakeup chinese)
+// bit 2 - send HALT cmd after sequence
+// bit 3 - turn on FPGA
+// bit 4 - turn off FPGA
+// bit 5 - set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)
+#define MAGIC_UID                      0x01
+#define MAGIC_WUPC                     0x02
+#define MAGIC_HALT                     0x04
+#define MAGIC_INIT                     0x08
+#define MAGIC_OFF                      0x10
+#define MAGIC_DATAIN           0x20
+#define MAGIC_WIPE                     0x40
+#define MAGIC_SINGLE           (MAGIC_WUPC | MAGIC_HALT | MAGIC_INIT | MAGIC_OFF) //0x1E
 
 /**
 06 00 = INITIATE
@@ -243,39 +263,39 @@ ISO 7816-4 Basic interindustry commands. For command APDU's.
 #define FUSE_RA      0x01
 
 // ISO 7816-4 Basic interindustry commands. For command APDU's.
-#define ISO7816_READ_BINARY 0xB0
-#define ISO7816_WRITE_BINARY 0xD0
-#define ISO7816_UPDATE_BINARY 0xD6
-#define ISO7816_ERASE_BINARY 0x0E
-#define ISO7816_READ_RECORDS 0xB2
-#define ISO7816_WRITE_RECORDS 0xD2
-#define ISO7816_APPEND_RECORD 0xE2
-#define ISO7816_UPDATE_RECORD 0xDC
-#define ISO7816_GET_DATA 0xCA
-#define ISO7816_PUT_DATA 0xDA
-#define ISO7816_SELECT_FILE 0xA4
-#define ISO7816_VERIFY 0x20
+#define ISO7816_READ_BINARY                            0xB0
+#define ISO7816_WRITE_BINARY                   0xD0
+#define ISO7816_UPDATE_BINARY                  0xD6
+#define ISO7816_ERASE_BINARY                   0x0E
+#define ISO7816_READ_RECORDS                   0xB2
+#define ISO7816_WRITE_RECORDS                  0xD2
+#define ISO7816_APPEND_RECORD                  0xE2
+#define ISO7816_UPDATE_RECORD                  0xDC
+#define ISO7816_GET_DATA                               0xCA
+#define ISO7816_PUT_DATA                               0xDA
+#define ISO7816_SELECT_FILE                    0xA4
+#define ISO7816_VERIFY                                         0x20
 #define ISO7816_INTERNAL_AUTHENTICATION 0x88
 #define ISO7816_EXTERNAL_AUTHENTICATION 0x82
-#define ISO7816_GET_CHALLENGE 0xB4
-#define ISO7816_MANAGE_CHANNEL 0x70
+#define ISO7816_GET_CHALLENGE                  0xB4
+#define ISO7816_MANAGE_CHANNEL                         0x70
 
 // ISO7816-4   For response APDU's
-#define ISO7816_OK     0x9000
+#define ISO7816_OK                                             0x9000
 //     6x xx = ERROR
        
 void printIclassDumpInfo(uint8_t* iclass_dump);
 void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
 
 /* T55x7 configuration register definitions */
-#define T55x7_POR_DELAY                        0x00000001
-#define T55x7_ST_TERMINATOR            0x00000008
-#define T55x7_PWD                      0x00000010
+#define T55x7_POR_DELAY                                0x00000001
+#define T55x7_ST_TERMINATOR                    0x00000008
+#define T55x7_PWD                                      0x00000010
 #define T55x7_MAXBLOCK_SHIFT           5
-#define T55x7_AOR                      0x00000200
-#define T55x7_PSKCF_RF_2               0
-#define T55x7_PSKCF_RF_4               0x00000400
-#define T55x7_PSKCF_RF_8               0x00000800
+#define T55x7_AOR                                      0x00000200
+#define T55x7_PSKCF_RF_2                       0
+#define T55x7_PSKCF_RF_4                       0x00000400
+#define T55x7_PSKCF_RF_8                       0x00000800
 #define T55x7_MODULATION_DIRECT                0
 #define T55x7_MODULATION_PSK1          0x00001000
 #define T55x7_MODULATION_PSK2          0x00002000
@@ -287,17 +307,17 @@ void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *
 #define T55x7_MODULATION_MANCHESTER    0x00008000
 #define T55x7_MODULATION_BIPHASE       0x00010000
 #define T55x7_MODULATION_DIPHASE       0x00018000
-#define T55x7_BITRATE_RF_8             0
-#define T55x7_BITRATE_RF_16            0x00040000
-#define T55x7_BITRATE_RF_32            0x00080000
-#define T55x7_BITRATE_RF_40            0x000C0000
-#define T55x7_BITRATE_RF_50            0x00100000
-#define T55x7_BITRATE_RF_64            0x00140000
+#define T55x7_BITRATE_RF_8                     0
+#define T55x7_BITRATE_RF_16                    0x00040000
+#define T55x7_BITRATE_RF_32                    0x00080000
+#define T55x7_BITRATE_RF_40                    0x000C0000
+#define T55x7_BITRATE_RF_50                    0x00100000
+#define T55x7_BITRATE_RF_64                    0x00140000
 #define T55x7_BITRATE_RF_100           0x00180000
 #define T55x7_BITRATE_RF_128           0x001C0000
 
 /* T5555 (Q5) configuration register definitions */
-#define T5555_ST_TERMINATOR            0x00000001
+#define T5555_ST_TERMINATOR                    0x00000001
 #define T5555_MAXBLOCK_SHIFT           0x00000001
 #define T5555_MODULATION_MANCHESTER    0
 #define T5555_MODULATION_PSK1          0x00000010
@@ -307,15 +327,15 @@ void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *
 #define T5555_MODULATION_FSK2          0x00000050
 #define T5555_MODULATION_BIPHASE       0x00000060
 #define T5555_MODULATION_DIRECT                0x00000070
-#define T5555_INVERT_OUTPUT            0x00000080
-#define T5555_PSK_RF_2                 0
-#define T5555_PSK_RF_4                 0x00000100
-#define T5555_PSK_RF_8                 0x00000200
-#define T5555_USE_PWD                  0x00000400
-#define T5555_USE_AOR                  0x00000800
-#define T5555_BITRATE_SHIFT            12
-#define T5555_FAST_WRITE               0x00004000
-#define T5555_PAGE_SELECT              0x00008000
+#define T5555_INVERT_OUTPUT                    0x00000080
+#define T5555_PSK_RF_2                         0
+#define T5555_PSK_RF_4                         0x00000100
+#define T5555_PSK_RF_8                         0x00000200
+#define T5555_USE_PWD                          0x00000400
+#define T5555_USE_AOR                          0x00000800
+#define T5555_BITRATE_SHIFT         12 //(RF=2n+2)   ie 64=2*0x1F+2   or n = (RF-2)/2
+#define T5555_FAST_WRITE                       0x00004000
+#define T5555_PAGE_SELECT                      0x00008000
 
 uint32_t GetT55xxClockBit(uint32_t clock);