#ifndef PROTOCOLS_H
#define PROTOCOLS_H
+#include <string.h>
+#include <stdint.h>
+#include <stdarg.h>
+
+
//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
/*
ISO14443A (usually NFC tags)
#define ISO14443A_CMD_WUPA 0x52
#define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95
+#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97
#define ISO14443A_CMD_WRITEBLOCK 0xA0
#define ISO14443A_CMD_HALT 0x50
#define ISO14443A_CMD_RATS 0xE0
#define MIFARE_EV1_PERSONAL_UID 0x40
#define MIFARE_EV1_SETMODE 0x43
-
#define MIFARE_ULC_WRITE 0xA2
//#define MIFARE_ULC__COMP_WRITE 0xA0
#define MIFARE_ULC_AUTH_1 0x1A
#define MIFARE_ULEV1_CHECKTEAR 0x3E
#define MIFARE_ULEV1_VCSL 0x4B
-
+// mifare 4bit card answers
+#define CARD_ACK 0x0A // 1010 - ACK
+#define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed)
+#define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error
+
+
+// Magic Generation 1, parameter "work flags"
+// bit 0 - need get UID
+// bit 1 - send wupC (wakeup chinese)
+// bit 2 - send HALT cmd after sequence
+// bit 3 - turn on FPGA
+// bit 4 - turn off FPGA
+// bit 5 - set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)
+#define MAGIC_UID 0x01
+#define MAGIC_WUPC 0x02
+#define MAGIC_HALT 0x04
+#define MAGIC_INIT 0x08
+#define MAGIC_OFF 0x10
+#define MAGIC_DATAIN 0x20
+#define MAGIC_WIPE 0x40
+#define MAGIC_SINGLE (MAGIC_WUPC | MAGIC_HALT | MAGIC_INIT | MAGIC_OFF) //0x1E
/**
06 00 = INITIATE
#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
+// Definetions of which protocol annotations there are available
#define ISO_14443A 0
#define ICLASS 1
#define ISO_14443B 2
#define TOPAZ 3
#define ISO_7816_4 4
+#define MFDES 5
+#define LEGIC 6
//-- Picopass fuses
#define FUSE_FPERS 0x80
#define FUSE_RA 0x01
// ISO 7816-4 Basic interindustry commands. For command APDU's.
-#define ISO7816_READ_BINARY 0xB0
-#define ISO7816_WRITE_BINARY 0xD0
-#define ISO7816_UPDATE_BINARY 0xD6
-#define ISO7816_ERASE_BINARY 0x0E
-#define ISO7816_READ_RECORDS 0xB2
-#define ISO7816_WRITE_RECORDS 0xD2
-#define ISO7816_APPEND_RECORD 0xE2
-#define ISO7816_UPDATE_RECORD 0xDC
-#define ISO7816_GET_DATA 0xCA
-#define ISO7816_PUT_DATA 0xDA
-#define ISO7816_SELECT_FILE 0xA4
-#define ISO7816_VERIFY 0x20
+#define ISO7816_READ_BINARY 0xB0
+#define ISO7816_WRITE_BINARY 0xD0
+#define ISO7816_UPDATE_BINARY 0xD6
+#define ISO7816_ERASE_BINARY 0x0E
+#define ISO7816_READ_RECORDS 0xB2
+#define ISO7816_WRITE_RECORDS 0xD2
+#define ISO7816_APPEND_RECORD 0xE2
+#define ISO7816_UPDATE_RECORD 0xDC
+#define ISO7816_GET_DATA 0xCA
+#define ISO7816_PUT_DATA 0xDA
+#define ISO7816_SELECT_FILE 0xA4
+#define ISO7816_VERIFY 0x20
#define ISO7816_INTERNAL_AUTHENTICATION 0x88
#define ISO7816_EXTERNAL_AUTHENTICATION 0x82
-#define ISO7816_GET_CHALLENGE 0xB4
-#define ISO7816_MANAGE_CHANNEL 0x70
+#define ISO7816_GET_CHALLENGE 0xB4
+#define ISO7816_MANAGE_CHANNEL 0x70
// ISO7816-4 For response APDU's
-#define ISO7816_OK 0x9000
+#define ISO7816_OK 0x9000
// 6x xx = ERROR
+// MIFARE DESFire command set:
+#define MFDES_CREATE_APPLICATION 0xca
+#define MFDES_DELETE_APPLICATION 0xda
+#define MFDES_GET_APPLICATION_IDS 0x6a
+#define MFDES_SELECT_APPLICATION 0x5a
+#define MFDES_FORMAT_PICC 0xfc
+#define MFDES_GET_VERSION 0x60
+#define MFDES_READ_DATA 0xbd
+#define MFDES_WRITE_DATA 0x3d
+#define MFDES_GET_VALUE 0x6c
+#define MFDES_CREDIT 0x0c
+#define MFDES_DEBIT 0xdc
+#define MFDES_LIMITED_CREDIT 0x1c
+#define MFDES_WRITE_RECORD 0x3b
+#define MFDES_READ_RECORDS 0xbb
+#define MFDES_CLEAR_RECORD_FILE 0xeb
+#define MFDES_COMMIT_TRANSACTION 0xc7
+#define MFDES_ABORT_TRANSACTION 0xa7
+#define MFDES_GET_FREE_MEMORY 0x6e
+#define MFDES_GET_FILE_IDS 0x6f
+#define MFDES_GET_ISOFILE_IDS 0x61
+#define MFDES_GET_FILE_SETTINGS 0xf5
+#define MFDES_CHANGE_FILE_SETTINGS 0x5f
+#define MFDES_CREATE_STD_DATA_FILE 0xcd
+#define MFDES_CREATE_BACKUP_DATA_FILE 0xcb
+#define MFDES_CREATE_VALUE_FILE 0xcc
+#define MFDES_CREATE_LINEAR_RECORD_FILE 0xc1
+#define MFDES_CREATE_CYCLIC_RECORD_FILE 0xc0
+#define MFDES_DELETE_FILE 0xdf
+#define MFDES_AUTHENTICATE 0x0a // AUTHENTICATE_NATIVE
+#define MFDES_AUTHENTICATE_ISO 0x1a // AUTHENTICATE_STANDARD
+#define MFDES_AUTHENTICATE_AES 0xaa
+#define MFDES_CHANGE_KEY_SETTINGS 0x54
+#define MFDES_GET_KEY_SETTINGS 0x45
+#define MFDES_CHANGE_KEY 0xc4
+#define MFDES_GET_KEY_VERSION 0x64
+#define MFDES_AUTHENTICATION_FRAME 0xAF
+
+// LEGIC Commands
+#define LEGIC_MIM_22 0x0D
+#define LEGIC_MIM_256 0x1D
+#define LEGIC_MIM_1024 0x3D
+#define LEGIC_ACK_22 0x19
+#define LEGIC_ACK_256 0x39
+#define LEGIC_READ 0x01
+#define LEGIC_WRITE 0x00
+
void printIclassDumpInfo(uint8_t* iclass_dump);
void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
/* T55x7 configuration register definitions */
-#define T55x7_POR_DELAY 0x00000001
-#define T55x7_ST_TERMINATOR 0x00000008
-#define T55x7_PWD 0x00000010
+#define T55x7_POR_DELAY 0x00000001
+#define T55x7_ST_TERMINATOR 0x00000008
+#define T55x7_PWD 0x00000010
#define T55x7_MAXBLOCK_SHIFT 5
-#define T55x7_AOR 0x00000200
-#define T55x7_PSKCF_RF_2 0
-#define T55x7_PSKCF_RF_4 0x00000400
-#define T55x7_PSKCF_RF_8 0x00000800
+#define T55x7_AOR 0x00000200
+#define T55x7_PSKCF_RF_2 0
+#define T55x7_PSKCF_RF_4 0x00000400
+#define T55x7_PSKCF_RF_8 0x00000800
#define T55x7_MODULATION_DIRECT 0
#define T55x7_MODULATION_PSK1 0x00001000
#define T55x7_MODULATION_PSK2 0x00002000
#define T55x7_MODULATION_MANCHESTER 0x00008000
#define T55x7_MODULATION_BIPHASE 0x00010000
#define T55x7_MODULATION_DIPHASE 0x00018000
-#define T55x7_BITRATE_RF_8 0
-#define T55x7_BITRATE_RF_16 0x00040000
-#define T55x7_BITRATE_RF_32 0x00080000
-#define T55x7_BITRATE_RF_40 0x000C0000
-#define T55x7_BITRATE_RF_50 0x00100000
-#define T55x7_BITRATE_RF_64 0x00140000
+#define T55x7_BITRATE_RF_8 0
+#define T55x7_BITRATE_RF_16 0x00040000
+#define T55x7_BITRATE_RF_32 0x00080000
+#define T55x7_BITRATE_RF_40 0x000C0000
+#define T55x7_BITRATE_RF_50 0x00100000
+#define T55x7_BITRATE_RF_64 0x00140000
#define T55x7_BITRATE_RF_100 0x00180000
#define T55x7_BITRATE_RF_128 0x001C0000
/* T5555 (Q5) configuration register definitions */
-#define T5555_ST_TERMINATOR 0x00000001
+#define T5555_ST_TERMINATOR 0x00000001
#define T5555_MAXBLOCK_SHIFT 0x00000001
#define T5555_MODULATION_MANCHESTER 0
#define T5555_MODULATION_PSK1 0x00000010
#define T5555_MODULATION_FSK2 0x00000050
#define T5555_MODULATION_BIPHASE 0x00000060
#define T5555_MODULATION_DIRECT 0x00000070
-#define T5555_INVERT_OUTPUT 0x00000080
-#define T5555_PSK_RF_2 0
-#define T5555_PSK_RF_4 0x00000100
-#define T5555_PSK_RF_8 0x00000200
-#define T5555_USE_PWD 0x00000400
-#define T5555_USE_AOR 0x00000800
-#define T5555_BITRATE_SHIFT 12
-#define T5555_FAST_WRITE 0x00004000
-#define T5555_PAGE_SELECT 0x00008000
+#define T5555_INVERT_OUTPUT 0x00000080
+#define T5555_PSK_RF_2 0
+#define T5555_PSK_RF_4 0x00000100
+#define T5555_PSK_RF_8 0x00000200
+#define T5555_USE_PWD 0x00000400
+#define T5555_USE_AOR 0x00000800
+#define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2
+#define T5555_FAST_WRITE 0x00004000
+#define T5555_PAGE_SELECT 0x00008000
uint32_t GetT55xxClockBit(uint32_t clock);
+// iclass / picopass chip config structures and shared routines
+typedef struct {
+ uint8_t app_limit; //[8]
+ uint8_t otp[2]; //[9-10]
+ uint8_t block_writelock;//[11]
+ uint8_t chip_config; //[12]
+ uint8_t mem_config; //[13]
+ uint8_t eas; //[14]
+ uint8_t fuses; //[15]
+} picopass_conf_block;
+
+
+typedef struct {
+ uint8_t csn[8];
+ picopass_conf_block conf;
+ uint8_t epurse[8];
+ uint8_t key_d[8];
+ uint8_t key_c[8];
+ uint8_t app_issuer_area[8];
+} picopass_hdr;
+
+
#endif
// PROTOCOLS_H
projects / proxmark3-svn / blobdiff