//-----------------------------------------------------------------------------\r
-// Copyright (C) 2011 Merlok\r
+// Copyright (C) 2011,2012 Merlok\r
//\r
// This code is licensed to you under the terms of the GNU GPL, version 2 or,\r
// at your option, any later version. See the LICENSE.txt file for the text of\r
//-----------------------------------------------------------------------------\r
\r
#include "cmdhfmf.h"\r
-#include "proxmark3.h"\r
\r
static int CmdHelp(const char *Cmd);\r
\r
int CmdHF14AMifare(const char *Cmd)\r
{\r
uint32_t uid = 0;\r
- uint32_t nt = 0;\r
+ uint32_t nt = 0, nr = 0;\r
uint64_t par_list = 0, ks_list = 0, r_key = 0;\r
uint8_t isOK = 0;\r
- uint8_t keyBlock[6] = {0,0,0,0,0,0};\r
+ uint8_t keyBlock[8] = {0};\r
\r
- if (param_getchar(Cmd, 0) && param_gethex(Cmd, 0, keyBlock, 8)) {\r
- PrintAndLog("Nt must include 8 HEX symbols");\r
- return 1;\r
- }\r
+ UsbCommand c = {CMD_READER_MIFARE, {true, 0, 0}};\r
+\r
+ // message\r
+ printf("-------------------------------------------------------------------------\n");\r
+ printf("Executing command. Expected execution time: 25sec on average :-)\n");\r
+ printf("Press the key on the proxmark3 device to abort both proxmark3 and client.\n");\r
+ printf("-------------------------------------------------------------------------\n");\r
\r
\r
- UsbCommand c = {CMD_READER_MIFARE, {(uint32_t)bytes_to_num(keyBlock, 4), 0, 0}};\r
start:\r
- SendCommand(&c);\r
+ clearCommandBuffer();\r
+ SendCommand(&c);\r
\r
//flush queue\r
while (ukbhit()) getchar();\r
\r
- // message\r
- printf("-------------------------------------------------------------------------\n");\r
- printf("Executing command. It may take up to 30 min.\n");\r
- printf("Press the key on proxmark3 device to abort proxmark3.\n");\r
- printf("Press the key on the proxmark3 device to abort both proxmark3 and client.\n");\r
- printf("-------------------------------------------------------------------------\n");\r
\r
// wait cycle\r
while (true) {\r
- printf(".");\r
+ printf(".");\r
fflush(stdout);\r
if (ukbhit()) {\r
getchar();\r
break;\r
}\r
\r
- UsbCommand * resp = WaitForResponseTimeout(CMD_ACK, 2000);\r
- if (resp != NULL) {\r
- isOK = resp->arg[0] & 0xff;\r
- \r
- uid = (uint32_t)bytes_to_num(resp->d.asBytes + 0, 4);\r
- nt = (uint32_t)bytes_to_num(resp->d.asBytes + 4, 4);\r
- par_list = bytes_to_num(resp->d.asBytes + 8, 8);\r
- ks_list = bytes_to_num(resp->d.asBytes + 16, 8);\r
- \r
+ UsbCommand resp;\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {\r
+ isOK = resp.arg[0] & 0xff;\r
+ uid = (uint32_t)bytes_to_num(resp.d.asBytes + 0, 4);\r
+ nt = (uint32_t)bytes_to_num(resp.d.asBytes + 4, 4);\r
+ par_list = bytes_to_num(resp.d.asBytes + 8, 8);\r
+ ks_list = bytes_to_num(resp.d.asBytes + 16, 8);\r
+ nr = bytes_to_num(resp.d.asBytes + 24, 4);\r
printf("\n\n");\r
- PrintAndLog("isOk:%02x", isOK);\r
if (!isOK) PrintAndLog("Proxmark can't get statistic info. Execution aborted.\n");\r
break;\r
}\r
} \r
+\r
printf("\n");\r
\r
// error\r
if (isOK != 1) return 1;\r
\r
// execute original function from util nonce2key\r
- if (nonce2key(uid, nt, par_list, ks_list, &r_key)) return 2;\r
- printf("------------------------------------------------------------------\n");\r
- PrintAndLog("Key found:%012llx \n", r_key);\r
+ if (nonce2key(uid, nt, nr, par_list, ks_list, &r_key))\r
+ {\r
+ isOK = 2;\r
+ PrintAndLog("Key not found (lfsr_common_prefix list is null). Nt=%08x", nt); \r
+ } else {\r
+ printf("------------------------------------------------------------------\n");\r
+ PrintAndLog("Key found:%012"llx" \n", r_key);\r
\r
- num_to_bytes(r_key, 6, keyBlock);\r
- isOK = mfCheckKeys(0, 0, 1, keyBlock, &r_key);\r
+ num_to_bytes(r_key, 6, keyBlock);\r
+ isOK = mfCheckKeys(0, 0, 1, keyBlock, &r_key);\r
+ }\r
if (!isOK) \r
- PrintAndLog("Found valid key:%012llx", r_key);\r
+ PrintAndLog("Found valid key:%012"llx, r_key);\r
else\r
{\r
- PrintAndLog("Found invalid key. ( Nt=%08x ,Trying use it to run again...", nt); \r
- c.d.asDwords[0] = nt;\r
+ if (isOK != 2) PrintAndLog("Found invalid key. "); \r
+ PrintAndLog("Failing is expected to happen in 25%% of all cases. Trying again with a different reader nonce...");\r
+ c.arg[0] = false;\r
goto start;\r
}\r
\r
PrintAndLog("Block data must include 32 HEX symbols");\r
return 1;\r
}\r
- PrintAndLog("--block no:%02x key type:%02x key:%s", blockNo, keyType, sprint_hex(key, 6));\r
+ PrintAndLog("--block no:%d, key type:%c, key:%s", blockNo, keyType?'B':'A', sprint_hex(key, 6));\r
PrintAndLog("--data: %s", sprint_hex(bldata, 16));\r
\r
UsbCommand c = {CMD_MIFARE_WRITEBL, {blockNo, keyType, 0}};\r
memcpy(c.d.asBytes, key, 6);\r
memcpy(c.d.asBytes + 10, bldata, 16);\r
SendCommand(&c);\r
- UsbCommand * resp = WaitForResponseTimeout(CMD_ACK, 1500);\r
-\r
- if (resp != NULL) {\r
- uint8_t isOK = resp->arg[0] & 0xff;\r
\r
+ UsbCommand resp;\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
PrintAndLog("isOk:%02x", isOK);\r
} else {\r
PrintAndLog("Command execute timeout");\r
return 0;\r
}\r
\r
+int CmdHF14AMfUWrBl(const char *Cmd)\r
+{\r
+ uint8_t blockNo = 0;\r
+ bool chinese_card=0;\r
+ uint8_t bldata[16] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};\r
+ UsbCommand resp;\r
+ \r
+ if (strlen(Cmd)<3) {\r
+ PrintAndLog("Usage: hf mf uwrbl <block number> <block data (8 hex symbols)> <w>");\r
+ PrintAndLog(" sample: hf mf uwrbl 0 01020304");\r
+ return 0;\r
+ } \r
+\r
+ blockNo = param_get8(Cmd, 0);\r
+ if (param_gethex(Cmd, 1, bldata, 8)) {\r
+ PrintAndLog("Block data must include 8 HEX symbols");\r
+ return 1;\r
+ }\r
+ \r
+ if (strchr(Cmd,'w') != 0) {\r
+ chinese_card=1;\r
+ }\r
+ \r
+ switch(blockNo){\r
+ case 0:\r
+ if (!chinese_card){\r
+ PrintAndLog("Access Denied");\r
+ }else{\r
+ PrintAndLog("--specialblock no:%d", blockNo);\r
+ PrintAndLog("--data: %s", sprint_hex(bldata, 4));\r
+ UsbCommand d = {CMD_MIFAREU_WRITEBL, {blockNo}};\r
+ memcpy(d.d.asBytes,bldata, 4);\r
+ SendCommand(&d);\r
+\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ PrintAndLog("isOk:%02x", isOK);\r
+ } else {\r
+ PrintAndLog("Command execute timeout");\r
+ }\r
+ }\r
+ break;\r
+ case 1:\r
+ if (!chinese_card){\r
+ PrintAndLog("Access Denied");\r
+ }else{\r
+ PrintAndLog("--specialblock no:%d", blockNo);\r
+ PrintAndLog("--data: %s", sprint_hex(bldata, 4));\r
+ UsbCommand d = {CMD_MIFAREU_WRITEBL, {blockNo}};\r
+ memcpy(d.d.asBytes,bldata, 4);\r
+ SendCommand(&d);\r
+\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ PrintAndLog("isOk:%02x", isOK);\r
+ } else {\r
+ PrintAndLog("Command execute timeout");\r
+ }\r
+ }\r
+ break;\r
+ case 2:\r
+ if (!chinese_card){\r
+ PrintAndLog("Access Denied");\r
+ }else{\r
+ PrintAndLog("--specialblock no:%d", blockNo);\r
+ PrintAndLog("--data: %s", sprint_hex(bldata, 4));\r
+ UsbCommand c = {CMD_MIFAREU_WRITEBL, {blockNo}};\r
+ memcpy(c.d.asBytes, bldata, 4);\r
+ SendCommand(&c);\r
+\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ PrintAndLog("isOk:%02x", isOK);\r
+ } else {\r
+ PrintAndLog("Command execute timeout");\r
+ }\r
+ }\r
+ break;\r
+ case 3:\r
+ PrintAndLog("--specialblock no:%d", blockNo);\r
+ PrintAndLog("--data: %s", sprint_hex(bldata, 4));\r
+ UsbCommand d = {CMD_MIFAREU_WRITEBL, {blockNo}};\r
+ memcpy(d.d.asBytes,bldata, 4);\r
+ SendCommand(&d);\r
+\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ PrintAndLog("isOk:%02x", isOK);\r
+ } else {\r
+ PrintAndLog("Command execute timeout");\r
+ }\r
+ break;\r
+ default: \r
+ PrintAndLog("--block no:%d", blockNo);\r
+ PrintAndLog("--data: %s", sprint_hex(bldata, 4)); \r
+ UsbCommand e = {CMD_MIFAREU_WRITEBL, {blockNo}};\r
+ memcpy(e.d.asBytes,bldata, 4);\r
+ SendCommand(&e);\r
+\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ PrintAndLog("isOk:%02x", isOK);\r
+ } else {\r
+ PrintAndLog("Command execute timeout");\r
+ }\r
+ break;\r
+ }\r
+ return 0;\r
+}\r
+\r
+\r
int CmdHF14AMfRdBl(const char *Cmd)\r
{\r
uint8_t blockNo = 0;\r
PrintAndLog("Key must include 12 HEX symbols");\r
return 1;\r
}\r
- PrintAndLog("--block no:%02x key type:%02x key:%s ", blockNo, keyType, sprint_hex(key, 6));\r
+ PrintAndLog("--block no:%d, key type:%c, key:%s ", blockNo, keyType?'B':'A', sprint_hex(key, 6));\r
\r
UsbCommand c = {CMD_MIFARE_READBL, {blockNo, keyType, 0}};\r
memcpy(c.d.asBytes, key, 6);\r
SendCommand(&c);\r
- UsbCommand * resp = WaitForResponseTimeout(CMD_ACK, 1500);\r
\r
- if (resp != NULL) {\r
- uint8_t isOK = resp->arg[0] & 0xff;\r
- uint8_t * data = resp->d.asBytes;\r
+ UsbCommand resp;\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ uint8_t *data = resp.d.asBytes;\r
\r
if (isOK)\r
PrintAndLog("isOk:%02x data:%s", isOK, sprint_hex(data, 16));\r
return 0;\r
}\r
\r
+int CmdHF14AMfURdBl(const char *Cmd)\r
+{\r
+ uint8_t blockNo = 0;\r
+\r
+ if (strlen(Cmd)<1) {\r
+ PrintAndLog("Usage: hf mf urdbl <block number>");\r
+ PrintAndLog(" sample: hf mf urdbl 0");\r
+ return 0;\r
+ } \r
+ \r
+ blockNo = param_get8(Cmd, 0);\r
+ PrintAndLog("--block no:%d", blockNo);\r
+ \r
+ UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};\r
+ SendCommand(&c);\r
+\r
+ UsbCommand resp;\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ uint8_t *data = resp.d.asBytes;\r
+\r
+ if (isOK)\r
+ PrintAndLog("isOk:%02x data:%s", isOK, sprint_hex(data, 4));\r
+ else\r
+ PrintAndLog("isOk:%02x", isOK);\r
+ } else {\r
+ PrintAndLog("Command execute timeout");\r
+ }\r
+\r
+ return 0;\r
+}\r
+\r
+\r
+int CmdHF14AMfURdCard(const char *Cmd)\r
+{\r
+ int i;\r
+ uint8_t sectorNo = 0;\r
+ uint8_t *lockbytes_t=NULL;\r
+ uint8_t lockbytes[2]={0,0};\r
+ bool bit[16]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};\r
+ \r
+ uint8_t isOK = 0;\r
+ uint8_t * data = NULL;\r
+\r
+ PrintAndLog("Attempting to Read Ultralight... ");\r
+ \r
+ UsbCommand c = {CMD_MIFAREU_READCARD, {sectorNo}};\r
+ SendCommand(&c);\r
+\r
+ UsbCommand resp;\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ isOK = resp.arg[0] & 0xff;\r
+ data = resp.d.asBytes;\r
+\r
+ PrintAndLog("isOk:%02x", isOK);\r
+ if (isOK) \r
+ { // bit 0 and 1\r
+ PrintAndLog("Block %3d:%s ", 0,sprint_hex(data + 0 * 4, 4));\r
+ PrintAndLog("Block %3d:%s ", 1,sprint_hex(data + 1 * 4, 4));\r
+ // bit 2\r
+ //process lock bytes\r
+ lockbytes_t=data+(2*4);\r
+ lockbytes[0]=lockbytes_t[2];\r
+ lockbytes[1]=lockbytes_t[3];\r
+ for(int j=0; j<16; j++){\r
+ bit[j]=lockbytes[j/8] & ( 1 <<(7-j%8));\r
+ }\r
+ //remaining\r
+ for (i = 3; i < 16; i++) {\r
+ int bitnum = (23-i) % 16;\r
+ PrintAndLog("Block %3d:%s [%d]", i,sprint_hex(data + i * 4, 4),bit[bitnum]);\r
+ }\r
+\r
+ }\r
+ } else {\r
+ PrintAndLog("Command execute timeout");\r
+ }\r
+ return 0;\r
+}\r
+\r
+\r
int CmdHF14AMfRdSc(const char *Cmd)\r
{\r
int i;\r
uint8_t sectorNo = 0;\r
uint8_t keyType = 0;\r
uint8_t key[6] = {0, 0, 0, 0, 0, 0};\r
- \r
uint8_t isOK = 0;\r
- uint8_t * data = NULL;\r
-\r
+ uint8_t *data = NULL;\r
char cmdp = 0x00;\r
\r
if (strlen(Cmd)<3) {\r
} \r
\r
sectorNo = param_get8(Cmd, 0);\r
- if (sectorNo > 63) {\r
- PrintAndLog("Sector number must be less than 64");\r
+ if (sectorNo > 39) {\r
+ PrintAndLog("Sector number must be less than 40");\r
return 1;\r
}\r
cmdp = param_getchar(Cmd, 1);\r
- if (cmdp == 0x00) {\r
+ if (cmdp != 'a' && cmdp != 'A' && cmdp != 'b' && cmdp != 'B') {\r
PrintAndLog("Key type must be A or B");\r
return 1;\r
}\r
PrintAndLog("Key must include 12 HEX symbols");\r
return 1;\r
}\r
- PrintAndLog("--sector no:%02x key type:%02x key:%s ", sectorNo, keyType, sprint_hex(key, 6));\r
+ PrintAndLog("--sector no:%d key type:%c key:%s ", sectorNo, keyType?'B':'A', sprint_hex(key, 6));\r
\r
- UsbCommand c = {CMD_MIFARE_READSC, {sectorNo, keyType, 0}};\r
+ UsbCommand c = {CMD_MIFARE_READSC, {sectorNo, keyType, 0}};\r
memcpy(c.d.asBytes, key, 6);\r
- SendCommand(&c);\r
- UsbCommand * resp = WaitForResponseTimeout(CMD_ACK, 1500);\r
+ SendCommand(&c);\r
PrintAndLog(" ");\r
\r
- if (resp != NULL) {\r
- isOK = resp->arg[0] & 0xff;\r
- data = resp->d.asBytes;\r
+ UsbCommand resp;\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ isOK = resp.arg[0] & 0xff;\r
+ data = resp.d.asBytes;\r
\r
PrintAndLog("isOk:%02x", isOK);\r
- if (isOK) \r
- for (i = 0; i < 2; i++) {\r
- PrintAndLog("data:%s", sprint_hex(data + i * 16, 16));\r
+ if (isOK) {\r
+ for (i = 0; i < (sectorNo<32?3:15); i++) {\r
+ PrintAndLog("data : %s", sprint_hex(data + i * 16, 16));\r
}\r
+ PrintAndLog("trailer: %s", sprint_hex(data + (sectorNo<32?3:15) * 16, 16));\r
+ }\r
} else {\r
- PrintAndLog("Command1 execute timeout");\r
+ PrintAndLog("Command execute timeout");\r
}\r
\r
- // response2\r
- resp = WaitForResponseTimeout(CMD_ACK, 500);\r
- PrintAndLog(" ");\r
+ return 0;\r
+}\r
\r
- if (resp != NULL) {\r
- isOK = resp->arg[0] & 0xff;\r
- data = resp->d.asBytes;\r
\r
- if (isOK) \r
- for (i = 0; i < 2; i++) {\r
- PrintAndLog("data:%s", sprint_hex(data + i * 16, 16));\r
- }\r
+uint8_t FirstBlockOfSector(uint8_t sectorNo)\r
+{\r
+ if (sectorNo < 32) {\r
+ return sectorNo * 4;\r
} else {\r
- PrintAndLog("Command2 execute timeout");\r
+ return 32 * 4 + (sectorNo - 32) * 16;\r
+ }\r
+}\r
+\r
+\r
+uint8_t NumBlocksPerSector(uint8_t sectorNo)\r
+{\r
+ if (sectorNo < 32) {\r
+ return 4;\r
+ } else {\r
+ return 16;\r
}\r
- \r
- return 0;\r
}\r
\r
+\r
int CmdHF14AMfDump(const char *Cmd)\r
{\r
- int i, j;\r
+ uint8_t sectorNo, blockNo;\r
\r
uint8_t keyA[40][6];\r
uint8_t keyB[40][6];\r
uint8_t rights[40][4];\r
+ uint8_t carddata[256][16];\r
+ uint8_t numSectors = 16;\r
\r
FILE *fin;\r
FILE *fout;\r
\r
- UsbCommand *resp;\r
+ UsbCommand resp;\r
+\r
+ char cmdp = param_getchar(Cmd, 0);\r
+ switch (cmdp) {\r
+ case '0' : numSectors = 5; break;\r
+ case '1' : \r
+ case '\0': numSectors = 16; break;\r
+ case '2' : numSectors = 32; break;\r
+ case '4' : numSectors = 40; break;\r
+ default: numSectors = 16;\r
+ } \r
+ \r
+ if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') {\r
+ PrintAndLog("Usage: hf mf dump [card memory]");\r
+ PrintAndLog(" [card memory]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K");\r
+ PrintAndLog("");\r
+ PrintAndLog("Samples: hf mf dump");\r
+ PrintAndLog(" hf mf dump 4");\r
+ return 0;\r
+ }\r
\r
if ((fin = fopen("dumpkeys.bin","rb")) == NULL) {\r
PrintAndLog("Could not find file dumpkeys.bin");\r
return 1;\r
}\r
\r
- if ((fout = fopen("dumpdata.bin","wb")) == NULL) { \r
- PrintAndLog("Could not create file name dumpdata.bin");\r
- return 1;\r
- }\r
- \r
// Read key file\r
- \r
- for (i=0 ; i<16 ; i++) {\r
- fread ( keyA[i], 1, 6, fin );\r
- }\r
- for (i=0 ; i<16 ; i++) {\r
- fread ( keyB[i], 1, 6, fin );\r
+\r
+ for (sectorNo=0; sectorNo<numSectors; sectorNo++) {\r
+ if (fread( keyA[sectorNo], 1, 6, fin ) == 0) {\r
+ PrintAndLog("File reading error.");\r
+ fclose(fin);\r
+ return 2;\r
+ }\r
}\r
\r
+ for (sectorNo=0; sectorNo<numSectors; sectorNo++) {\r
+ if (fread( keyB[sectorNo], 1, 6, fin ) == 0) {\r
+ PrintAndLog("File reading error.");\r
+ fclose(fin);\r
+ return 2;\r
+ }\r
+ }\r
+ fclose(fin);\r
// Read access rights to sectors\r
- \r
+\r
PrintAndLog("|-----------------------------------------|");\r
PrintAndLog("|------ Reading sector access bits...-----|");\r
PrintAndLog("|-----------------------------------------|");\r
\r
- for (i = 0 ; i < 16 ; i++) {\r
- UsbCommand c = {CMD_MIFARE_READBL, {4*i + 3, 0, 0}};\r
- memcpy(c.d.asBytes, keyA[i], 6);\r
+ for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 0, 0}};\r
+ memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
SendCommand(&c);\r
- resp = WaitForResponseTimeout(CMD_ACK, 1500);\r
\r
- if (resp != NULL) {\r
- uint8_t isOK = resp->arg[0] & 0xff;\r
- uint8_t *data = resp->d.asBytes;\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ uint8_t *data = resp.d.asBytes;\r
if (isOK){\r
- rights[i][0] = ((data[7] & 0x10)>>4) | ((data[8] & 0x1)<<1) | ((data[8] & 0x10)>>2);\r
- rights[i][1] = ((data[7] & 0x20)>>5) | ((data[8] & 0x2)<<0) | ((data[8] & 0x20)>>3);\r
- rights[i][2] = ((data[7] & 0x40)>>6) | ((data[8] & 0x4)>>1) | ((data[8] & 0x40)>>4);\r
- rights[i][3] = ((data[7] & 0x80)>>7) | ((data[8] & 0x8)>>2) | ((data[8] & 0x80)>>5);\r
- }\r
- else{\r
- PrintAndLog("Could not get access rights for block %d", i);\r
+ rights[sectorNo][0] = ((data[7] & 0x10)>>2) | ((data[8] & 0x1)<<1) | ((data[8] & 0x10)>>4); // C1C2C3 for data area 0\r
+ rights[sectorNo][1] = ((data[7] & 0x20)>>3) | ((data[8] & 0x2)<<0) | ((data[8] & 0x20)>>5); // C1C2C3 for data area 1\r
+ rights[sectorNo][2] = ((data[7] & 0x40)>>4) | ((data[8] & 0x4)>>1) | ((data[8] & 0x40)>>6); // C1C2C3 for data area 2\r
+ rights[sectorNo][3] = ((data[7] & 0x80)>>5) | ((data[8] & 0x8)>>2) | ((data[8] & 0x80)>>7); // C1C2C3 for sector trailer\r
+ } else {\r
+ PrintAndLog("Could not get access rights for sector %2d. Trying with defaults...", sectorNo);\r
+ rights[sectorNo][0] = rights[sectorNo][1] = rights[sectorNo][2] = 0x00;\r
+ rights[sectorNo][3] = 0x01;\r
}\r
- }\r
- else {\r
- PrintAndLog("Command execute timeout");\r
+ } else {\r
+ PrintAndLog("Command execute timeout when trying to read access rights for sector %2d. Trying with defaults...", sectorNo);\r
+ rights[sectorNo][0] = rights[sectorNo][1] = rights[sectorNo][2] = 0x00;\r
+ rights[sectorNo][3] = 0x01;\r
}\r
}\r
\r
PrintAndLog("|----- Dumping all blocks to file... -----|");\r
PrintAndLog("|-----------------------------------------|");\r
\r
- for (i=0 ; i<16 ; i++) {\r
- for (j=0 ; j<4 ; j++) {\r
- if (j == 3){\r
- UsbCommand c = {CMD_MIFARE_READBL, {i*4 + j, 0, 0}};\r
- memcpy(c.d.asBytes, keyA[i], 6);\r
+ bool isOK = true;\r
+ for (sectorNo = 0; isOK && sectorNo < numSectors; sectorNo++) {\r
+ for (blockNo = 0; isOK && blockNo < NumBlocksPerSector(sectorNo); blockNo++) {\r
+ bool received = false;\r
+ if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer. At least the Access Conditions can always be read with key A. \r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
+ memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
SendCommand(&c);\r
- resp = WaitForResponseTimeout(CMD_ACK, 1500);\r
- }\r
- else{\r
- if ((rights[i][j] == 6) | (rights[i][j] == 5)) {\r
- UsbCommand c = {CMD_MIFARE_READBL, {i*4+j, 1, 0}};\r
- memcpy(c.d.asBytes, keyB[i], 6);\r
+ received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+ } else { // data block. Check if it can be read with key A or key B\r
+ uint8_t data_area = sectorNo<32?blockNo:blockNo/5;\r
+ if ((rights[sectorNo][data_area] == 0x03) || (rights[sectorNo][data_area] == 0x05)) { // only key B would work\r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 1, 0}};\r
+ memcpy(c.d.asBytes, keyB[sectorNo], 6);\r
SendCommand(&c);\r
- resp = WaitForResponseTimeout(CMD_ACK, 1500);\r
- }\r
- else if (rights[i][j] == 7) {\r
- PrintAndLog("Access rights do not allow reading of sector %d block %d",i,j);\r
- }\r
- else {\r
- UsbCommand c = {CMD_MIFARE_READBL, {i*4+j, 0, 0}};\r
- memcpy(c.d.asBytes, keyA[i], 6);\r
+ received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+ } else if (rights[sectorNo][data_area] == 0x07) { // no key would work\r
+ isOK = false;\r
+ PrintAndLog("Access rights do not allow reading of sector %2d block %3d", sectorNo, blockNo);\r
+ } else { // key A would work\r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
+ memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
SendCommand(&c);\r
- resp = WaitForResponseTimeout(CMD_ACK, 1500);\r
+ received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
}\r
}\r
\r
- if (resp != NULL) {\r
- uint8_t isOK = resp->arg[0] & 0xff;\r
- uint8_t *data = resp->d.asBytes;\r
- if (j == 3) {\r
- data[0] = (keyA[i][0]);\r
- data[1] = (keyA[i][1]);\r
- data[2] = (keyA[i][2]);\r
- data[3] = (keyA[i][3]);\r
- data[4] = (keyA[i][4]);\r
- data[5] = (keyA[i][5]);\r
- data[10] = (keyB[i][0]);\r
- data[11] = (keyB[i][1]);\r
- data[12] = (keyB[i][2]);\r
- data[13] = (keyB[i][3]);\r
- data[14] = (keyB[i][4]);\r
- data[15] = (keyB[i][5]);\r
+ if (received) {\r
+ isOK = resp.arg[0] & 0xff;\r
+ uint8_t *data = resp.d.asBytes;\r
+ if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer. Fill in the keys.\r
+ data[0] = (keyA[sectorNo][0]);\r
+ data[1] = (keyA[sectorNo][1]);\r
+ data[2] = (keyA[sectorNo][2]);\r
+ data[3] = (keyA[sectorNo][3]);\r
+ data[4] = (keyA[sectorNo][4]);\r
+ data[5] = (keyA[sectorNo][5]);\r
+ data[10] = (keyB[sectorNo][0]);\r
+ data[11] = (keyB[sectorNo][1]);\r
+ data[12] = (keyB[sectorNo][2]);\r
+ data[13] = (keyB[sectorNo][3]);\r
+ data[14] = (keyB[sectorNo][4]);\r
+ data[15] = (keyB[sectorNo][5]);\r
}\r
if (isOK) {\r
- fwrite ( data, 1, 16, fout );\r
- }\r
- else {\r
- PrintAndLog("Could not get access rights for block %d", i);\r
+ memcpy(carddata[FirstBlockOfSector(sectorNo) + blockNo], data, 16);\r
+ PrintAndLog("Successfully read block %2d of sector %2d.", blockNo, sectorNo);\r
+ } else {\r
+ PrintAndLog("Could not read block %2d of sector %2d", blockNo, sectorNo);\r
+ break;\r
}\r
}\r
else {\r
- PrintAndLog("Command execute timeout");\r
+ isOK = false;\r
+ PrintAndLog("Command execute timeout when trying to read block %2d of sector %2d.", blockNo, sectorNo);\r
+ break;\r
}\r
}\r
+\r
}\r
- \r
- fclose(fin);\r
- fclose(fout);\r
- \r
- return 0;\r
+\r
+ if (isOK) {\r
+ if ((fout = fopen("dumpdata.bin","wb")) == NULL) { \r
+ PrintAndLog("Could not create file name dumpdata.bin");\r
+ return 1;\r
+ }\r
+ uint16_t numblocks = FirstBlockOfSector(numSectors - 1) + NumBlocksPerSector(numSectors - 1);\r
+ fwrite(carddata, 1, 16*numblocks, fout);\r
+ fclose(fout);\r
+ PrintAndLog("Dumped %d blocks (%d bytes) to file dumpdata.bin", numblocks, 16*numblocks);\r
+ }\r
+ \r
+ return 0;\r
}\r
\r
+\r
int CmdHF14AMfRestore(const char *Cmd)\r
{\r
\r
- int i,j;\r
+ uint8_t sectorNo,blockNo;\r
uint8_t keyType = 0;\r
uint8_t key[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};\r
uint8_t bldata[16] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};\r
- uint8_t keyA[16][6];\r
- uint8_t keyB[16][6];\r
+ uint8_t keyA[40][6];\r
+ uint8_t keyB[40][6];\r
+ uint8_t numSectors;\r
\r
FILE *fdump;\r
FILE *fkeys;\r
- \r
+\r
+ char cmdp = param_getchar(Cmd, 0);\r
+ switch (cmdp) {\r
+ case '0' : numSectors = 5; break;\r
+ case '1' : \r
+ case '\0': numSectors = 16; break;\r
+ case '2' : numSectors = 32; break;\r
+ case '4' : numSectors = 40; break;\r
+ default: numSectors = 16;\r
+ } \r
+\r
+ if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') {\r
+ PrintAndLog("Usage: hf mf restore [card memory]");\r
+ PrintAndLog(" [card memory]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K");\r
+ PrintAndLog("");\r
+ PrintAndLog("Samples: hf mf restore");\r
+ PrintAndLog(" hf mf restore 4");\r
+ return 0;\r
+ }\r
+\r
if ((fdump = fopen("dumpdata.bin","rb")) == NULL) {\r
PrintAndLog("Could not find file dumpdata.bin");\r
return 1;\r
}\r
if ((fkeys = fopen("dumpkeys.bin","rb")) == NULL) {\r
PrintAndLog("Could not find file dumpkeys.bin");\r
+ fclose(fdump);\r
return 1;\r
}\r
\r
- for (i=0 ; i<16 ; i++) {\r
- fread(keyA[i], 1, 6, fkeys);\r
+ for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
+ if (fread(keyA[sectorNo], 1, 6, fkeys) == 0) {\r
+ PrintAndLog("File reading error (dumpkeys.bin).");\r
+ fclose(fdump);\r
+ fclose(fkeys);\r
+ return 2;\r
+ }\r
}\r
- for (i=0 ; i<16 ; i++) {\r
- fread(keyB[i], 1, 6, fkeys);\r
+\r
+ for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
+ if (fread(keyB[sectorNo], 1, 6, fkeys) == 0) {\r
+ PrintAndLog("File reading error (dumpkeys.bin).");\r
+ fclose(fdump);\r
+ fclose(fkeys);\r
+ return 2;\r
+ }\r
}\r
- \r
+ fclose(fkeys);\r
+\r
PrintAndLog("Restoring dumpdata.bin to card");\r
\r
- for (i=0 ; i<16 ; i++) {\r
- for( j=0 ; j<4 ; j++) {\r
- UsbCommand c = {CMD_MIFARE_WRITEBL, {i*4 + j, keyType, 0}};\r
+ for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
+ for(blockNo = 0; blockNo < NumBlocksPerSector(sectorNo); blockNo++) {\r
+ UsbCommand c = {CMD_MIFARE_WRITEBL, {FirstBlockOfSector(sectorNo) + blockNo, keyType, 0}};\r
memcpy(c.d.asBytes, key, 6);\r
\r
- fread(bldata, 1, 16, fdump);\r
+ if (fread(bldata, 1, 16, fdump) == 0) {\r
+ PrintAndLog("File reading error (dumpdata.bin).");\r
+ fclose(fdump);\r
+ return 2;\r
+ }\r
\r
- if (j == 3) {\r
- bldata[0] = (keyA[i][0]);\r
- bldata[1] = (keyA[i][1]);\r
- bldata[2] = (keyA[i][2]);\r
- bldata[3] = (keyA[i][3]);\r
- bldata[4] = (keyA[i][4]);\r
- bldata[5] = (keyA[i][5]);\r
- bldata[10] = (keyB[i][0]);\r
- bldata[11] = (keyB[i][1]);\r
- bldata[12] = (keyB[i][2]);\r
- bldata[13] = (keyB[i][3]);\r
- bldata[14] = (keyB[i][4]);\r
- bldata[15] = (keyB[i][5]);\r
+ if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer\r
+ bldata[0] = (keyA[sectorNo][0]);\r
+ bldata[1] = (keyA[sectorNo][1]);\r
+ bldata[2] = (keyA[sectorNo][2]);\r
+ bldata[3] = (keyA[sectorNo][3]);\r
+ bldata[4] = (keyA[sectorNo][4]);\r
+ bldata[5] = (keyA[sectorNo][5]);\r
+ bldata[10] = (keyB[sectorNo][0]);\r
+ bldata[11] = (keyB[sectorNo][1]);\r
+ bldata[12] = (keyB[sectorNo][2]);\r
+ bldata[13] = (keyB[sectorNo][3]);\r
+ bldata[14] = (keyB[sectorNo][4]);\r
+ bldata[15] = (keyB[sectorNo][5]);\r
} \r
\r
- PrintAndLog("Writing to block %2d: %s", i*4+j, sprint_hex(bldata, 16));\r
- \r
- /*\r
- PrintAndLog("Writing to block %2d: %s Confirm? [Y,N]", i*4+j, sprint_hex(bldata, 16));\r
- \r
- scanf("%c",&ch);\r
- if ((ch != 'y') && (ch != 'Y')){\r
- PrintAndLog("Aborting !");\r
- return 1;\r
- }\r
- */\r
+ PrintAndLog("Writing to block %3d: %s", FirstBlockOfSector(sectorNo) + blockNo, sprint_hex(bldata, 16));\r
\r
memcpy(c.d.asBytes + 10, bldata, 16);\r
SendCommand(&c);\r
- UsbCommand *resp = WaitForResponseTimeout(CMD_ACK, 1500);\r
\r
- if (resp != NULL) {\r
- uint8_t isOK = resp->arg[0] & 0xff;\r
+ UsbCommand resp;\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
PrintAndLog("isOk:%02x", isOK);\r
} else {\r
PrintAndLog("Command execute timeout");\r
}\r
\r
fclose(fdump);\r
- fclose(fkeys);\r
return 0;\r
}\r
\r
+\r
int CmdHF14AMfNested(const char *Cmd)\r
{\r
int i, j, res, iterations;\r
- sector * e_sector = NULL;\r
+ sector *e_sector = NULL;\r
uint8_t blockNo = 0;\r
uint8_t keyType = 0;\r
uint8_t trgBlockNo = 0;\r
uint8_t trgKeyType = 0;\r
- uint8_t blDiff = 0;\r
- int SectorsCnt = 0;\r
+ uint8_t SectorsCnt = 0;\r
uint8_t key[6] = {0, 0, 0, 0, 0, 0};\r
- uint8_t keyBlock[16 * 6];\r
+ uint8_t keyBlock[6*6];\r
uint64_t key64 = 0;\r
- int transferToEml = 0;\r
+ bool transferToEml = false;\r
\r
- int createDumpFile = 0;\r
+ bool createDumpFile = false;\r
FILE *fkeys;\r
uint8_t standart[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};\r
uint8_t tempkey[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};\r
PrintAndLog("d - write keys to binary file");\r
PrintAndLog(" ");\r
PrintAndLog(" sample1: hf mf nested 1 0 A FFFFFFFFFFFF ");\r
- PrintAndLog(" sample1: hf mf nested 1 0 A FFFFFFFFFFFF t ");\r
- PrintAndLog(" sample1: hf mf nested 1 0 A FFFFFFFFFFFF d ");\r
- PrintAndLog(" sample2: hf mf nested o 0 A FFFFFFFFFFFF 4 A");\r
+ PrintAndLog(" sample2: hf mf nested 1 0 A FFFFFFFFFFFF t ");\r
+ PrintAndLog(" sample3: hf mf nested 1 0 A FFFFFFFFFFFF d ");\r
+ PrintAndLog(" sample4: hf mf nested o 0 A FFFFFFFFFFFF 4 A");\r
return 0;\r
} \r
\r
cmdp = param_getchar(Cmd, 0);\r
blockNo = param_get8(Cmd, 1);\r
ctmp = param_getchar(Cmd, 2);\r
- if (ctmp == 0x00) {\r
+ if (ctmp != 'a' && ctmp != 'A' && ctmp != 'b' && ctmp != 'B') {\r
PrintAndLog("Key type must be A or B");\r
return 1;\r
}\r
cmdp = 'o';\r
trgBlockNo = param_get8(Cmd, 4);\r
ctmp = param_getchar(Cmd, 5);\r
- if (ctmp == 0x00) {\r
+ if (ctmp != 'a' && ctmp != 'A' && ctmp != 'b' && ctmp != 'B') {\r
PrintAndLog("Target key type must be A or B");\r
return 1;\r
}\r
case '0': SectorsCnt = 05; break;\r
case '1': SectorsCnt = 16; break;\r
case '2': SectorsCnt = 32; break;\r
- case '4': SectorsCnt = 64; break;\r
+ case '4': SectorsCnt = 40; break;\r
default: SectorsCnt = 16;\r
}\r
}\r
\r
ctmp = param_getchar(Cmd, 4);\r
- if (ctmp == 't' || ctmp == 'T') transferToEml = 1;\r
- else if (ctmp == 'd' || ctmp == 'D') createDumpFile = 1;\r
+ if (ctmp == 't' || ctmp == 'T') transferToEml = true;\r
+ else if (ctmp == 'd' || ctmp == 'D') createDumpFile = true;\r
\r
ctmp = param_getchar(Cmd, 6);\r
transferToEml |= (ctmp == 't' || ctmp == 'T');\r
transferToEml |= (ctmp == 'd' || ctmp == 'D');\r
\r
- PrintAndLog("--block no:%02x key type:%02x key:%s etrans:%d", blockNo, keyType, sprint_hex(key, 6), transferToEml);\r
- if (cmdp == 'o')\r
- PrintAndLog("--target block no:%02x target key type:%02x ", trgBlockNo, trgKeyType);\r
-\r
if (cmdp == 'o') {\r
- if (mfnested(blockNo, keyType, key, trgBlockNo, trgKeyType, keyBlock)) {\r
+ PrintAndLog("--target block no:%3d, target key type:%c ", trgBlockNo, trgKeyType?'B':'A');\r
+ if (mfnested(blockNo, keyType, key, trgBlockNo, trgKeyType, keyBlock, true)) {\r
PrintAndLog("Nested error.");\r
return 2;\r
}\r
-\r
- for (i = 0; i < 16; i++) {\r
- PrintAndLog("count=%d key= %s", i, sprint_hex(keyBlock + i * 6, 6));\r
- }\r
- \r
- // test keys\r
- res = mfCheckKeys(trgBlockNo, trgKeyType, 8, keyBlock, &key64);\r
- if (res)\r
- res = mfCheckKeys(trgBlockNo, trgKeyType, 8, &keyBlock[6 * 8], &key64);\r
- if (!res) {\r
- PrintAndLog("Found valid key:%012llx", key64);\r
+ key64 = bytes_to_num(keyBlock, 6);\r
+ if (key64) {\r
+ PrintAndLog("Found valid key:%012"llx, key64);\r
\r
// transfer key to the emulator\r
if (transferToEml) {\r
- mfEmlGetMem(keyBlock, (trgBlockNo / 4) * 4 + 3, 1);\r
+ uint8_t sectortrailer;\r
+ if (trgBlockNo < 32*4) { // 4 block sector\r
+ sectortrailer = (trgBlockNo & 0x03) + 3;\r
+ } else { // 16 block sector\r
+ sectortrailer = (trgBlockNo & 0x0f) + 15;\r
+ }\r
+ mfEmlGetMem(keyBlock, sectortrailer, 1);\r
\r
if (!trgKeyType)\r
num_to_bytes(key64, 6, keyBlock);\r
else\r
num_to_bytes(key64, 6, &keyBlock[10]);\r
- mfEmlSetMem(keyBlock, (trgBlockNo / 4) * 4 + 3, 1); \r
+ mfEmlSetMem(keyBlock, sectortrailer, 1); \r
}\r
} else {\r
PrintAndLog("No valid key found");\r
}\r
}\r
else { // ------------------------------------ multiple sectors working\r
- blDiff = blockNo % 4;\r
- PrintAndLog("Block shift=%d", blDiff);\r
+ clock_t time1;\r
+ time1 = clock();\r
+\r
e_sector = calloc(SectorsCnt, sizeof(sector));\r
if (e_sector == NULL) return 1;\r
\r
- //test current key 4 sectors\r
+ //test current key and additional standard keys first\r
memcpy(keyBlock, key, 6);\r
- num_to_bytes(0xa0a1a2a3a4a5, 6, (uint8_t*)(keyBlock + 1 * 6));\r
- num_to_bytes(0xb0b1b2b3b4b5, 6, (uint8_t*)(keyBlock + 2 * 6));\r
- num_to_bytes(0xffffffffffff, 6, (uint8_t*)(keyBlock + 3 * 6));\r
- num_to_bytes(0x000000000000, 6, (uint8_t*)(keyBlock + 4 * 6));\r
+ num_to_bytes(0xffffffffffff, 6, (uint8_t*)(keyBlock + 1 * 6));\r
+ num_to_bytes(0x000000000000, 6, (uint8_t*)(keyBlock + 2 * 6));\r
+ num_to_bytes(0xa0a1a2a3a4a5, 6, (uint8_t*)(keyBlock + 3 * 6));\r
+ num_to_bytes(0xb0b1b2b3b4b5, 6, (uint8_t*)(keyBlock + 4 * 6));\r
num_to_bytes(0xaabbccddeeff, 6, (uint8_t*)(keyBlock + 5 * 6));\r
\r
PrintAndLog("Testing known keys. Sector count=%d", SectorsCnt);\r
for (j = 0; j < 2; j++) {\r
if (e_sector[i].foundKey[j]) continue;\r
\r
- res = mfCheckKeys(i * 4 + blDiff, j, 6, keyBlock, &key64);\r
+ res = mfCheckKeys(FirstBlockOfSector(i), j, 6, keyBlock, &key64);\r
\r
if (!res) {\r
e_sector[i].Key[j] = key64;\r
e_sector[i].foundKey[j] = 1;\r
}\r
}\r
- } \r
+ }\r
+ \r
\r
// nested sectors\r
iterations = 0;\r
PrintAndLog("nested...");\r
+ bool calibrate = true;\r
for (i = 0; i < NESTED_SECTOR_RETRY; i++) {\r
- for (trgBlockNo = blDiff; trgBlockNo < SectorsCnt * 4; trgBlockNo = trgBlockNo + 4) \r
+ for (uint8_t sectorNo = 0; sectorNo < SectorsCnt; sectorNo++) {\r
for (trgKeyType = 0; trgKeyType < 2; trgKeyType++) { \r
- if (e_sector[trgBlockNo / 4].foundKey[trgKeyType]) continue;\r
- if (mfnested(blockNo, keyType, key, trgBlockNo, trgKeyType, keyBlock)) continue;\r
+ if (e_sector[sectorNo].foundKey[trgKeyType]) continue;\r
+ PrintAndLog("-----------------------------------------------");\r
+ if(mfnested(blockNo, keyType, key, FirstBlockOfSector(sectorNo), trgKeyType, keyBlock, calibrate)) {\r
+ PrintAndLog("Nested error.\n");\r
+ return 2;\r
+ }\r
+ else {\r
+ calibrate = false;\r
+ }\r
\r
iterations++;\r
- \r
- //try keys from nested\r
- res = mfCheckKeys(trgBlockNo, trgKeyType, 8, keyBlock, &key64);\r
- if (res)\r
- res = mfCheckKeys(trgBlockNo, trgKeyType, 8, &keyBlock[6 * 8], &key64);\r
- if (!res) {\r
- PrintAndLog("Found valid key:%012llx", key64); \r
- e_sector[trgBlockNo / 4].foundKey[trgKeyType] = 1;\r
- e_sector[trgBlockNo / 4].Key[trgKeyType] = key64;\r
+\r
+ key64 = bytes_to_num(keyBlock, 6);\r
+ if (key64) {\r
+ PrintAndLog("Found valid key:%012"llx, key64);\r
+ e_sector[sectorNo].foundKey[trgKeyType] = 1;\r
+ e_sector[sectorNo].Key[trgKeyType] = key64;\r
}\r
}\r
+ }\r
}\r
\r
- PrintAndLog("Iterations count: %d", iterations);\r
+ printf("Time in nested: %1.3f (%1.3f sec per key)\n\n", ((float)clock() - time1)/CLOCKS_PER_SEC, ((float)clock() - time1)/iterations/CLOCKS_PER_SEC);\r
+ \r
+ PrintAndLog("-----------------------------------------------\nIterations count: %d\n\n", iterations);\r
//print them\r
PrintAndLog("|---|----------------|---|----------------|---|");\r
PrintAndLog("|sec|key A |res|key B |res|");\r
PrintAndLog("|---|----------------|---|----------------|---|");\r
for (i = 0; i < SectorsCnt; i++) {\r
- PrintAndLog("|%03d| %012llx | %d | %012llx | %d |", i, \r
+ PrintAndLog("|%03d| %012"llx" | %d | %012"llx" | %d |", i,\r
e_sector[i].Key[0], e_sector[i].foundKey[0], e_sector[i].Key[1], e_sector[i].foundKey[1]);\r
}\r
PrintAndLog("|---|----------------|---|----------------|---|");\r
// transfer them to the emulator\r
if (transferToEml) {\r
for (i = 0; i < SectorsCnt; i++) {\r
- mfEmlGetMem(keyBlock, i * 4 + 3, 1);\r
+ mfEmlGetMem(keyBlock, FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1, 1);\r
if (e_sector[i].foundKey[0])\r
num_to_bytes(e_sector[i].Key[0], 6, keyBlock);\r
if (e_sector[i].foundKey[1])\r
num_to_bytes(e_sector[i].Key[1], 6, &keyBlock[10]);\r
- mfEmlSetMem(keyBlock, i * 4 + 3, 1);\r
+ mfEmlSetMem(keyBlock, FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1, 1);\r
} \r
}\r
\r
free(e_sector);\r
return 1;\r
}\r
- PrintAndLog("Printing keys to bynary file dumpkeys.bin...");\r
- for(i=0; i<16; i++) {\r
+ PrintAndLog("Printing keys to binary file dumpkeys.bin...");\r
+ for(i=0; i<SectorsCnt; i++) {\r
if (e_sector[i].foundKey[0]){\r
num_to_bytes(e_sector[i].Key[0], 6, tempkey);\r
fwrite ( tempkey, 1, 6, fkeys );\r
fwrite ( &standart, 1, 6, fkeys );\r
}\r
}\r
- for(i=0; i<16; i++) {\r
+ for(i=0; i<SectorsCnt; i++) {\r
if (e_sector[i].foundKey[1]){\r
num_to_bytes(e_sector[i].Key[1], 6, tempkey);\r
fwrite ( tempkey, 1, 6, fkeys );\r
return 0;\r
}\r
\r
-static uint32_t\r
-get_trailer_block (uint32_t uiBlock)\r
-{\r
- // Test if we are in the small or big sectors\r
- uint32_t trailer_block = 0;\r
- if (uiBlock < 128) {\r
- trailer_block = uiBlock + (3 - (uiBlock % 4));\r
- } else {\r
- trailer_block = uiBlock + (15 - (uiBlock % 16));\r
- }\r
- return trailer_block;\r
-}\r
+\r
int CmdHF14AMfChk(const char *Cmd)\r
{\r
+ if (strlen(Cmd)<3) {\r
+ PrintAndLog("Usage: hf mf chk <block number>|<*card memory> <key type (A/B/?)> [t] [<key (12 hex symbols)>] [<dic (*.dic)>]");\r
+ PrintAndLog(" * - all sectors");\r
+ PrintAndLog("card memory - 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K, <other> - 1K");\r
+ PrintAndLog("d - write keys to binary file\n");\r
+ PrintAndLog(" sample: hf mf chk 0 A 1234567890ab keys.dic");\r
+ PrintAndLog(" hf mf chk *1 ? t");\r
+ return 0;\r
+ } \r
+\r
FILE * f;\r
char filename[256]={0};\r
char buf[13];\r
int transferToEml = 0;\r
int createDumpFile = 0;\r
\r
+\r
keyBlock = calloc(stKeyBlock, 6);\r
if (keyBlock == NULL) return 1;\r
\r
- num_to_bytes(0xffffffffffff, 6, (uint8_t*)(keyBlock + 0 * 6)); // Default key (first key used by program if no user defined key)\r
- num_to_bytes(0x000000000000, 6, (uint8_t*)(keyBlock + 1 * 6)); // Blank key\r
- num_to_bytes(0xa0a1a2a3a4a5, 6, (uint8_t*)(keyBlock + 2 * 6)); // NFCForum MAD key\r
- num_to_bytes(0xb0b1b2b3b4b5, 6, (uint8_t*)(keyBlock + 3 * 6));\r
- num_to_bytes(0xaabbccddeeff, 6, (uint8_t*)(keyBlock + 4 * 6));\r
- num_to_bytes(0x4d3a99c351dd, 6, (uint8_t*)(keyBlock + 5 * 6));\r
- num_to_bytes(0x1a982c7e459a, 6, (uint8_t*)(keyBlock + 6 * 6));\r
- num_to_bytes(0xd3f7d3f7d3f7, 6, (uint8_t*)(keyBlock + 7 * 6));\r
- num_to_bytes(0x714c5c886e97, 6, (uint8_t*)(keyBlock + 8 * 6));\r
- num_to_bytes(0x587ee5f9350f, 6, (uint8_t*)(keyBlock + 9 * 6));\r
- num_to_bytes(0xa0478cc39091, 6, (uint8_t*)(keyBlock + 10 * 6));\r
- num_to_bytes(0x533cb6c723f6, 6, (uint8_t*)(keyBlock + 11 * 6));\r
- num_to_bytes(0x8fd0a4f256e9, 6, (uint8_t*)(keyBlock + 12 * 6));\r
+ uint64_t defaultKeys[] =\r
+ {\r
+ 0xffffffffffff, // Default key (first key used by program if no user defined key)\r
+ 0x000000000000, // Blank key\r
+ 0xa0a1a2a3a4a5, // NFCForum MAD key\r
+ 0xb0b1b2b3b4b5,\r
+ 0xaabbccddeeff,\r
+ 0x4d3a99c351dd,\r
+ 0x1a982c7e459a,\r
+ 0xd3f7d3f7d3f7,\r
+ 0x714c5c886e97,\r
+ 0x587ee5f9350f,\r
+ 0xa0478cc39091,\r
+ 0x533cb6c723f6,\r
+ 0x8fd0a4f256e9\r
+ };\r
+ int defaultKeysSize = sizeof(defaultKeys) / sizeof(uint64_t);\r
+\r
+ for (int defaultKeyCounter = 0; defaultKeyCounter < defaultKeysSize; defaultKeyCounter++)\r
+ {\r
+ num_to_bytes(defaultKeys[defaultKeyCounter], 6, (uint8_t*)(keyBlock + defaultKeyCounter * 6));\r
+ }\r
\r
- if (strlen(Cmd)<3) {\r
- PrintAndLog("Usage: hf mf chk <block number>/<*card memory> <key type (A/B/?)> [t] [<key (12 hex symbols)>] [<dic (*.dic)>]");\r
- PrintAndLog(" * - all sectors");\r
- PrintAndLog("card memory - 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K, <other> - 1K");\r
-// PrintAndLog("d - write keys to binary file\n");\r
- \r
- PrintAndLog(" sample: hf mf chk 0 A 1234567890ab keys.dic");\r
- PrintAndLog(" hf mf chk *1 ? t");\r
- return 0;\r
- } \r
\r
if (param_getchar(Cmd, 0)=='*') {\r
blockNo = 3;\r
}\r
keyBlock = p;\r
}\r
- PrintAndLog("chk key[%d] %02x%02x%02x%02x%02x%02x", keycnt,\r
+ PrintAndLog("chk key[%2d] %02x%02x%02x%02x%02x%02x", keycnt,\r
(keyBlock + 6*keycnt)[0],(keyBlock + 6*keycnt)[1], (keyBlock + 6*keycnt)[2],\r
(keyBlock + 6*keycnt)[3], (keyBlock + 6*keycnt)[4], (keyBlock + 6*keycnt)[5], 6);\r
keycnt++;\r
}\r
\r
if ( (f = fopen( filename , "r")) ) {\r
- while( !feof(f) ){\r
- memset(buf, 0, sizeof(buf));\r
- fgets(buf, sizeof(buf), f);\r
- \r
+ while( fgets(buf, sizeof(buf), f) ){\r
if (strlen(buf) < 12 || buf[11] == '\n')\r
continue;\r
\r
while (fgetc(f) != '\n' && !feof(f)) ; //goto next line\r
\r
- if( buf[0]=='#' ) continue; //The line start with # is remcommnet,skip\r
+ if( buf[0]=='#' ) continue; //The line start with # is comment, skip\r
\r
if (!isxdigit(buf[0])){\r
PrintAndLog("File content error. '%s' must include 12 HEX symbols",buf);\r
}\r
memset(keyBlock + 6 * keycnt, 0, 6);\r
num_to_bytes(strtoll(buf, NULL, 16), 6, keyBlock + 6*keycnt);\r
- PrintAndLog("chk custom key[%d] %012llx", keycnt, bytes_to_num(keyBlock + 6*keycnt, 6));\r
+ PrintAndLog("chk custom key[%2d] %012"llx, keycnt, bytes_to_num(keyBlock + 6*keycnt, 6));\r
keycnt++;\r
+ memset(buf, 0, sizeof(buf));\r
}\r
+ fclose(f);\r
} else {\r
PrintAndLog("File: %s: not found or locked.", filename);\r
free(keyBlock);\r
return 1;\r
- fclose(f);\r
}\r
}\r
}\r
\r
if (keycnt == 0) {\r
- PrintAndLog("No key specified,try default keys");\r
- for (;keycnt <=12; keycnt++)\r
- PrintAndLog("chk default key[%d] %02x%02x%02x%02x%02x%02x", keycnt,\r
- (keyBlock + 6*keycnt)[0],(keyBlock + 6*keycnt)[1], (keyBlock + 6*keycnt)[2],\r
- (keyBlock + 6*keycnt)[3], (keyBlock + 6*keycnt)[4], (keyBlock + 6*keycnt)[5], 6);\r
+ PrintAndLog("No key specified, trying default keys");\r
+ for (;keycnt < defaultKeysSize; keycnt++)\r
+ PrintAndLog("chk default key[%2d] %02x%02x%02x%02x%02x%02x", keycnt,\r
+ (keyBlock + 6*keycnt)[0],(keyBlock + 6*keycnt)[1], (keyBlock + 6*keycnt)[2],\r
+ (keyBlock + 6*keycnt)[3], (keyBlock + 6*keycnt)[4], (keyBlock + 6*keycnt)[5], 6);\r
}\r
\r
- for ( int t = !keyType ; t < 2 ; keyType==2?(t++):(t=2) ) {\r
+ // initialize storage for found keys\r
+ bool validKey[2][40];\r
+ uint8_t foundKey[2][40][6];\r
+ for (uint16_t t = 0; t < 2; t++) {\r
+ for (uint16_t sectorNo = 0; sectorNo < SectorsCnt; sectorNo++) {\r
+ validKey[t][sectorNo] = false;\r
+ for (uint16_t i = 0; i < 6; i++) {\r
+ foundKey[t][sectorNo][i] = 0xff;\r
+ }\r
+ }\r
+ }\r
+ \r
+ for ( int t = !keyType; t < 2; keyType==2?(t++):(t=2) ) {\r
int b=blockNo;\r
- for (int i=0; i<SectorsCnt; ++i) {\r
- PrintAndLog("--SectorsCnt:%d block no:0x%02x key type:%C key count:%d ", i, b, t?'B':'A', keycnt);\r
- int size = keycnt>8?8:keycnt;\r
- for (int c = 0; c < keycnt; c+=size) {\r
- size=keycnt-c>8?8:keycnt-c; \r
- res = mfCheckKeys(b, t, size, keyBlock +6*c, &key64);\r
- if (res !=1) {\r
+ for (int i = 0; i < SectorsCnt; ++i) {\r
+ PrintAndLog("--sector:%2d, block:%3d, key type:%C, key count:%2d ", i, b, t?'B':'A', keycnt);\r
+ uint32_t max_keys = keycnt>USB_CMD_DATA_SIZE/6?USB_CMD_DATA_SIZE/6:keycnt;\r
+ for (uint32_t c = 0; c < keycnt; c+=max_keys) {\r
+ uint32_t size = keycnt-c>max_keys?max_keys:keycnt-c;\r
+ res = mfCheckKeys(b, t, size, &keyBlock[6*c], &key64);\r
+ if (res != 1) {\r
if (!res) {\r
- PrintAndLog("Found valid key:[%012llx]",key64);\r
- if (transferToEml) {\r
- uint8_t block[16];\r
- mfEmlGetMem(block, get_trailer_block(b), 1);\r
- num_to_bytes(key64, 6, block + t*10);\r
- mfEmlSetMem(block, get_trailer_block(b), 1);\r
- }\r
- break;\r
- }\r
- else {\r
- printf("Not found yet, keycnt:%d\r", c+size);\r
- fflush(stdout);\r
- }\r
+ PrintAndLog("Found valid key:[%012"llx"]",key64);\r
+ num_to_bytes(key64, 6, foundKey[t][i]);\r
+ validKey[t][i] = true;\r
+ } \r
} else {\r
PrintAndLog("Command execute timeout");\r
}\r
b<127?(b+=4):(b+=16); \r
}\r
}\r
- \r
- free(keyBlock);\r
\r
-/*\r
- // Create dump file\r
+ if (transferToEml) {\r
+ uint8_t block[16];\r
+ for (uint16_t sectorNo = 0; sectorNo < SectorsCnt; sectorNo++) {\r
+ if (validKey[0][sectorNo] || validKey[1][sectorNo]) {\r
+ mfEmlGetMem(block, FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 1);\r
+ for (uint16_t t = 0; t < 2; t++) {\r
+ if (validKey[t][sectorNo]) {\r
+ memcpy(block + t*10, foundKey[t][sectorNo], 6);\r
+ }\r
+ }\r
+ mfEmlSetMem(block, FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 1);\r
+ }\r
+ }\r
+ PrintAndLog("Found keys have been transferred to the emulator memory");\r
+ }\r
+\r
if (createDumpFile) {\r
- if ((fkeys = fopen("dumpkeys.bin","wb")) == NULL) { \r
+ FILE *fkeys = fopen("dumpkeys.bin","wb");\r
+ if (fkeys == NULL) { \r
PrintAndLog("Could not create file dumpkeys.bin");\r
- free(e_sector);\r
+ free(keyBlock);\r
return 1;\r
}\r
- PrintAndLog("Printing keys to bynary file dumpkeys.bin...");\r
- for(i=0; i<16; i++) {\r
- if (e_sector[i].foundKey[0]){\r
- num_to_bytes(e_sector[i].Key[0], 6, tempkey);\r
- fwrite ( tempkey, 1, 6, fkeys );\r
- }\r
- else{\r
- fwrite ( &standart, 1, 6, fkeys );\r
- }\r
- }\r
- for(i=0; i<16; i++) {\r
- if (e_sector[i].foundKey[1]){\r
- num_to_bytes(e_sector[i].Key[1], 6, tempkey);\r
- fwrite ( tempkey, 1, 6, fkeys );\r
- }\r
- else{\r
- fwrite ( &standart, 1, 6, fkeys );\r
- }\r
+ for (uint16_t t = 0; t < 2; t++) {\r
+ fwrite(foundKey[t], 1, 6*SectorsCnt, fkeys);\r
}\r
fclose(fkeys);\r
+ PrintAndLog("Found keys have been dumped to file dumpkeys.bin. 0xffffffffffff has been inserted for unknown keys.");\r
}\r
-*/\r
- return 0;\r
+\r
+ free(keyBlock);\r
+\r
+ return 0;\r
}\r
\r
+\r
int CmdHF14AMf1kSim(const char *Cmd)\r
{\r
- uint8_t uid[4] = {0, 0, 0, 0};\r
- \r
+ uint8_t uid[7] = {0, 0, 0, 0, 0, 0, 0};\r
+ uint8_t exitAfterNReads = 0;\r
+ uint8_t flags = 0;\r
+\r
if (param_getchar(Cmd, 0) == 'h') {\r
- PrintAndLog("Usage: hf mf sim <uid (8 hex symbols)>");\r
- PrintAndLog(" sample: hf mf sim 0a0a0a0a ");\r
+ PrintAndLog("Usage: hf mf sim u <uid (8 hex symbols)> n <numreads> i x");\r
+ PrintAndLog(" u (Optional) UID. If not specified, the UID from emulator memory will be used");\r
+ PrintAndLog(" n (Optional) Automatically exit simulation after <numreads> blocks have been read by reader. 0 = infinite");\r
+ PrintAndLog(" i (Optional) Interactive, means that console will not be returned until simulation finishes or is aborted");\r
+ PrintAndLog(" x (Optional) Crack, performs the 'reader attack', nr/ar attack against a legitimate reader, fishes out the key(s)");\r
+ PrintAndLog(" sample: hf mf sim u 0a0a0a0a ");\r
return 0;\r
- } \r
- \r
- if (param_getchar(Cmd, 0) && param_gethex(Cmd, 0, uid, 8)) {\r
- PrintAndLog("UID must include 8 HEX symbols");\r
- return 1;\r
}\r
- PrintAndLog(" uid:%s ", sprint_hex(uid, 4));\r
- \r
- UsbCommand c = {CMD_SIMULATE_MIFARE_CARD, {0, 0, 0}};\r
- memcpy(c.d.asBytes, uid, 4);\r
- SendCommand(&c);\r
+ uint8_t pnr = 0;\r
+ if (param_getchar(Cmd, pnr) == 'u') {\r
+ if(param_gethex(Cmd, pnr+1, uid, 8) == 0)\r
+ {\r
+ flags |= FLAG_4B_UID_IN_DATA; // UID from packet\r
+ } else if(param_gethex(Cmd,pnr+1,uid,14) == 0) {\r
+ flags |= FLAG_7B_UID_IN_DATA;// UID from packet\r
+ } else {\r
+ PrintAndLog("UID, if specified, must include 8 or 14 HEX symbols");\r
+ return 1;\r
+ }\r
+ pnr +=2;\r
+ }\r
+ if (param_getchar(Cmd, pnr) == 'n') {\r
+ exitAfterNReads = param_get8(Cmd,pnr+1);\r
+ pnr += 2;\r
+ }\r
+ if (param_getchar(Cmd, pnr) == 'i' ) {\r
+ //Using a flag to signal interactiveness, least significant bit\r
+ flags |= FLAG_INTERACTIVE;\r
+ pnr++;\r
+ }\r
\r
- return 0;\r
+ if (param_getchar(Cmd, pnr) == 'x' ) {\r
+ //Using a flag to signal interactiveness, least significant bit\r
+ flags |= FLAG_NR_AR_ATTACK;\r
+ }\r
+ PrintAndLog(" uid:%s, numreads:%d, flags:%d (0x%02x) ",\r
+ flags & FLAG_4B_UID_IN_DATA ? sprint_hex(uid,4):\r
+ flags & FLAG_7B_UID_IN_DATA ? sprint_hex(uid,7): "N/A"\r
+ , exitAfterNReads, flags,flags);\r
+\r
+\r
+ UsbCommand c = {CMD_SIMULATE_MIFARE_CARD, {flags, exitAfterNReads,0}};\r
+ memcpy(c.d.asBytes, uid, sizeof(uid));\r
+ SendCommand(&c);\r
+\r
+ if(flags & FLAG_INTERACTIVE)\r
+ {\r
+ UsbCommand resp;\r
+ PrintAndLog("Press pm3-button to abort simulation");\r
+ while(! WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ //We're waiting only 1.5 s at a time, otherwise we get the\r
+ // annoying message about "Waiting for a response... "\r
+ }\r
+ }\r
+ \r
+ return 0;\r
}\r
\r
+\r
int CmdHF14AMfDbg(const char *Cmd)\r
{\r
int dbgMode = param_get32ex(Cmd, 0, 0, 10);\r
if (dbgMode > 4) {\r
- PrintAndLog("Max debud mode parameter is 4 \n");\r
+ PrintAndLog("Max debug mode parameter is 4 \n");\r
}\r
\r
if (strlen(Cmd) < 1 || !param_getchar(Cmd, 0) || dbgMode > 4) {\r
PrintAndLog("Usage: hf mf dbg <debug level>");\r
PrintAndLog(" 0 - no debug messages");\r
PrintAndLog(" 1 - error messages");\r
- PrintAndLog(" 2 - all messages");\r
- PrintAndLog(" 4 - extended debug mode");\r
+ PrintAndLog(" 2 - plus information messages");\r
+ PrintAndLog(" 3 - plus debug messages");\r
+ PrintAndLog(" 4 - print even debug messages in timing critical functions");\r
+ PrintAndLog(" Note: this option therefore may cause malfunction itself");\r
return 0;\r
} \r
\r
return 0;\r
}\r
\r
+\r
int CmdHF14AMfEGet(const char *Cmd)\r
{\r
uint8_t blockNo = 0;\r
- uint8_t data[3 * 16];\r
- int i;\r
+ uint8_t data[16];\r
\r
if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
PrintAndLog("Usage: hf mf eget <block number>");\r
} \r
\r
blockNo = param_get8(Cmd, 0);\r
- if (blockNo >= 32 * 4 + 8 * 16) {\r
- PrintAndLog("Block number must be in [0..255] as in MIFARE classic.");\r
- return 1;\r
- }\r
\r
PrintAndLog(" ");\r
- if (!mfEmlGetMem(data, blockNo, 3)) {\r
- for (i = 0; i < 3; i++) {\r
- PrintAndLog("data[%d]:%s", blockNo + i, sprint_hex(data + i * 16, 16));\r
- }\r
+ if (!mfEmlGetMem(data, blockNo, 1)) {\r
+ PrintAndLog("data[%3d]:%s", blockNo, sprint_hex(data, 16));\r
} else {\r
PrintAndLog("Command execute timeout");\r
}\r
return 0;\r
}\r
\r
+\r
int CmdHF14AMfEClear(const char *Cmd)\r
{\r
if (param_getchar(Cmd, 0) == 'h') {\r
return 0;\r
}\r
\r
+\r
int CmdHF14AMfESet(const char *Cmd)\r
{\r
uint8_t memBlock[16];\r
} \r
\r
blockNo = param_get8(Cmd, 0);\r
- if (blockNo >= 32 * 4 + 8 * 16) {\r
- PrintAndLog("Block number must be in [0..255] as in MIFARE classic.");\r
- return 1;\r
- }\r
\r
if (param_gethex(Cmd, 1, memBlock, 32)) {\r
PrintAndLog("block data must include 32 HEX symbols");\r
}\r
\r
// 1 - blocks count\r
- UsbCommand c = {CMD_MIFARE_EML_MEMSET, {blockNo, 1, 0}};\r
+ UsbCommand c = {CMD_MIFARE_EML_MEMSET, {blockNo, 1, 0}};\r
memcpy(c.d.asBytes, memBlock, 16);\r
- SendCommand(&c);\r
- return 0;\r
+ SendCommand(&c);\r
+ return 0;\r
}\r
\r
+\r
int CmdHF14AMfELoad(const char *Cmd)\r
{\r
FILE * f;\r
char filename[20];\r
- char * fnameptr = filename;\r
+ char *fnameptr = filename;\r
char buf[64];\r
uint8_t buf8[64];\r
int i, len, blockNum;\r
blockNum = 0;\r
while(!feof(f)){\r
memset(buf, 0, sizeof(buf));\r
- fgets(buf, sizeof(buf), f);\r
-\r
+ if (fgets(buf, sizeof(buf), f) == NULL) {\r
+ if((blockNum == 16*4) || (blockNum == 32*4 + 8*16)) { // supports both old (1K) and new (4K) .eml files)\r
+ break;\r
+ }\r
+ PrintAndLog("File reading error.");\r
+ fclose(f);\r
+ return 2;\r
+ }\r
if (strlen(buf) < 32){\r
if(strlen(buf) && feof(f))\r
break;\r
PrintAndLog("File content error. Block data must include 32 HEX symbols");\r
+ fclose(f);\r
return 2;\r
}\r
- for (i = 0; i < 32; i += 2)\r
- sscanf(&buf[i], "%02x", (unsigned int *)&buf8[i / 2]);\r
+ for (i = 0; i < 32; i += 2) {\r
+ sscanf(&buf[i], "%02x", (unsigned int *)&buf8[i / 2]);\r
// PrintAndLog("data[%02d]:%s", blockNum, sprint_hex(buf8, 16));\r
-\r
+ }\r
if (mfEmlSetMem(buf8, blockNum, 1)) {\r
- PrintAndLog("Cant set emul block: %d", blockNum);\r
+ PrintAndLog("Cant set emul block: %3d", blockNum);\r
+ fclose(f);\r
return 3;\r
}\r
blockNum++;\r
\r
- if (blockNum >= 32 * 4 + 8 * 16) break;\r
+ if (blockNum >= 32*4 + 8*16) break;\r
}\r
fclose(f);\r
\r
- if (blockNum != 16 * 4 && blockNum != 32 * 4 + 8 * 16){\r
- PrintAndLog("File content error. There must be 64 blocks");\r
+ if ((blockNum != 16*4) && (blockNum != 32*4 + 8*16)) {\r
+ PrintAndLog("File content error. There must be 64 or 256 blocks.");\r
return 4;\r
}\r
- PrintAndLog("Loaded from file: %s", filename);\r
- return 0;\r
+ PrintAndLog("Loaded %d blocks from file: %s", blockNum, filename);\r
+ return 0;\r
}\r
\r
+\r
int CmdHF14AMfESave(const char *Cmd)\r
{\r
FILE * f;\r
f = fopen(filename, "w+");\r
\r
// put hex\r
- for (i = 0; i < 32 * 4 + 8 * 16; i++) {\r
+ for (i = 0; i < 32*4 + 8*16; i++) {\r
if (mfEmlGetMem(buf, i, 1)) {\r
PrintAndLog("Cant get block: %d", i);\r
break;\r
return 0;\r
}\r
\r
+\r
int CmdHF14AMfECFill(const char *Cmd)\r
{\r
uint8_t keyType = 0;\r
-\r
+ uint8_t numSectors = 16;\r
+ \r
if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
- PrintAndLog("Usage: hf mf efill <key A/B>");\r
- PrintAndLog("sample: hf mf efill A");\r
- PrintAndLog("Card data blocks transfers to card emulator memory.");\r
- PrintAndLog("Keys must be laid in the simulator memory. \n");\r
+ PrintAndLog("Usage: hf mf ecfill <key A/B> [card memory]");\r
+ PrintAndLog(" [card memory]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K");\r
+ PrintAndLog("");\r
+ PrintAndLog("samples: hf mf ecfill A");\r
+ PrintAndLog(" hf mf ecfill A 4");\r
+ PrintAndLog("Read card and transfer its data to emulator memory.");\r
+ PrintAndLog("Keys must be laid in the emulator memory. \n");\r
return 0;\r
} \r
\r
char ctmp = param_getchar(Cmd, 0);\r
- if (ctmp == 0x00) {\r
+ if (ctmp != 'a' && ctmp != 'A' && ctmp != 'b' && ctmp != 'B') {\r
PrintAndLog("Key type must be A or B");\r
return 1;\r
}\r
if (ctmp != 'A' && ctmp != 'a') keyType = 1;\r
\r
- UsbCommand c = {CMD_MIFARE_EML_CARDLOAD, {0, keyType, 0}};\r
- SendCommand(&c);\r
- return 0;\r
+ ctmp = param_getchar(Cmd, 1);\r
+ switch (ctmp) {\r
+ case '0' : numSectors = 5; break;\r
+ case '1' : \r
+ case '\0': numSectors = 16; break;\r
+ case '2' : numSectors = 32; break;\r
+ case '4' : numSectors = 40; break;\r
+ default: numSectors = 16;\r
+ } \r
+\r
+ printf("--params: numSectors: %d, keyType:%d", numSectors, keyType);\r
+ UsbCommand c = {CMD_MIFARE_EML_CARDLOAD, {numSectors, keyType, 0}};\r
+ SendCommand(&c);\r
+ return 0;\r
}\r
\r
+\r
int CmdHF14AMfEKeyPrn(const char *Cmd)\r
{\r
- int i,b=-1;\r
+ int i;\r
uint8_t data[16];\r
uint64_t keyA, keyB;\r
\r
PrintAndLog("|sec|key A |key B |");\r
PrintAndLog("|---|----------------|----------------|");\r
for (i = 0; i < 40; i++) {\r
- b<127?(b+=4):(b+=16);\r
- if (mfEmlGetMem(data, b, 1)) {\r
- PrintAndLog("error get block %d", b);\r
+ if (mfEmlGetMem(data, FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1, 1)) {\r
+ PrintAndLog("error get block %d", FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1);\r
break;\r
}\r
keyA = bytes_to_num(data, 6);\r
keyB = bytes_to_num(data + 10, 6);\r
- PrintAndLog("|%03d| %012llx | %012llx |", i, keyA, keyB);\r
+ PrintAndLog("|%03d| %012"llx" | %012"llx" |", i, keyA, keyB);\r
}\r
PrintAndLog("|---|----------------|----------------|");\r
\r
return 0;\r
}\r
\r
+\r
int CmdHF14AMfCSetUID(const char *Cmd)\r
{\r
uint8_t wipeCard = 0;\r
- uint8_t uid[8];\r
- uint8_t oldUid[8];\r
+ uint8_t uid[8] = {0};\r
+ uint8_t oldUid[8]= {0};\r
int res;\r
\r
if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
return 0;\r
}\r
\r
+\r
int CmdHF14AMfCSetBlk(const char *Cmd)\r
{\r
uint8_t uid[8];\r
} \r
\r
blockNo = param_get8(Cmd, 0);\r
- if (blockNo >= 32 * 4 + 8 * 16) {\r
- PrintAndLog("Block number must be in [0..255] as in MIFARE classic.");\r
- return 1;\r
- }\r
\r
if (param_gethex(Cmd, 1, memBlock, 32)) {\r
PrintAndLog("block data must include 32 HEX symbols");\r
return 1;\r
}\r
\r
- PrintAndLog("--block number:%02x data:%s", blockNo, sprint_hex(memBlock, 16));\r
+ PrintAndLog("--block number:%2d data:%s", blockNo, sprint_hex(memBlock, 16));\r
\r
res = mfCSetBlock(blockNo, memBlock, uid, 0, CSETBLOCK_SINGLE_OPER);\r
if (res) {\r
return 0;\r
}\r
\r
+\r
int CmdHF14AMfCLoad(const char *Cmd)\r
{\r
FILE * f;\r
flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC;\r
while(!feof(f)){\r
memset(buf, 0, sizeof(buf));\r
- fgets(buf, sizeof(buf), f);\r
+ if (fgets(buf, sizeof(buf), f) == NULL) {\r
+ PrintAndLog("File reading error.");\r
+ return 2;\r
+ }\r
\r
if (strlen(buf) < 32){\r
if(strlen(buf) && feof(f))\r
if (blockNum == 16 * 4 - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
\r
if (mfCSetBlock(blockNum, buf8, NULL, 0, flags)) {\r
- PrintAndLog("Cant set magic card block: %d", blockNum);\r
+ PrintAndLog("Can't set magic card block: %d", blockNum);\r
return 3;\r
}\r
blockNum++;\r
}\r
fclose(f);\r
\r
- if (blockNum != 16 * 4 && blockNum != 32 * 4 + 8 * 16){\r
+ if (blockNum != 16 * 4){\r
PrintAndLog("File content error. There must be 64 blocks");\r
return 4;\r
}\r
}\r
}\r
\r
+\r
+int CmdHF14AMfCGetBlk(const char *Cmd) {\r
+ uint8_t memBlock[16];\r
+ uint8_t blockNo = 0;\r
+ int res;\r
+ memset(memBlock, 0x00, sizeof(memBlock));\r
+\r
+ if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
+ PrintAndLog("Usage: hf mf cgetblk <block number>");\r
+ PrintAndLog("sample: hf mf cgetblk 1");\r
+ PrintAndLog("Get block data from magic Chinese card (only works with!!!)\n");\r
+ return 0;\r
+ } \r
+\r
+ blockNo = param_get8(Cmd, 0);\r
+\r
+ PrintAndLog("--block number:%2d ", blockNo);\r
+\r
+ res = mfCGetBlock(blockNo, memBlock, CSETBLOCK_SINGLE_OPER);\r
+ if (res) {\r
+ PrintAndLog("Can't read block. error=%d", res);\r
+ return 1;\r
+ }\r
+ \r
+ PrintAndLog("block data:%s", sprint_hex(memBlock, 16));\r
+ return 0;\r
+}\r
+\r
+\r
+int CmdHF14AMfCGetSc(const char *Cmd) {\r
+ uint8_t memBlock[16];\r
+ uint8_t sectorNo = 0;\r
+ int i, res, flags;\r
+ memset(memBlock, 0x00, sizeof(memBlock));\r
+\r
+ if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
+ PrintAndLog("Usage: hf mf cgetsc <sector number>");\r
+ PrintAndLog("sample: hf mf cgetsc 0");\r
+ PrintAndLog("Get sector data from magic Chinese card (only works with!!!)\n");\r
+ return 0;\r
+ } \r
+\r
+ sectorNo = param_get8(Cmd, 0);\r
+ if (sectorNo > 15) {\r
+ PrintAndLog("Sector number must be in [0..15] as in MIFARE classic.");\r
+ return 1;\r
+ }\r
+\r
+ PrintAndLog("--sector number:%d ", sectorNo);\r
+\r
+ flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC;\r
+ for (i = 0; i < 4; i++) {\r
+ if (i == 1) flags = 0;\r
+ if (i == 3) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
+\r
+ res = mfCGetBlock(sectorNo * 4 + i, memBlock, flags);\r
+ if (res) {\r
+ PrintAndLog("Can't read block. %d error=%d", sectorNo * 4 + i, res);\r
+ return 1;\r
+ }\r
+ \r
+ PrintAndLog("block %3d data:%s", sectorNo * 4 + i, sprint_hex(memBlock, 16));\r
+ }\r
+ return 0;\r
+}\r
+\r
+\r
+int CmdHF14AMfCSave(const char *Cmd) {\r
+\r
+ FILE * f;\r
+ char filename[20];\r
+ char * fnameptr = filename;\r
+ uint8_t fillFromEmulator = 0;\r
+ uint8_t buf[64];\r
+ int i, j, len, flags;\r
+ \r
+ memset(filename, 0, sizeof(filename));\r
+ memset(buf, 0, sizeof(buf));\r
+\r
+ if (param_getchar(Cmd, 0) == 'h') {\r
+ PrintAndLog("It saves `magic Chinese` card dump into the file `filename.eml` or `cardID.eml`");\r
+ PrintAndLog("or into emulator memory (option `e`)");\r
+ PrintAndLog("Usage: hf mf esave [file name w/o `.eml`][e]");\r
+ PrintAndLog(" sample: hf mf esave ");\r
+ PrintAndLog(" hf mf esave filename");\r
+ PrintAndLog(" hf mf esave e \n");\r
+ return 0;\r
+ } \r
+\r
+ char ctmp = param_getchar(Cmd, 0);\r
+ if (ctmp == 'e' || ctmp == 'E') fillFromEmulator = 1;\r
+\r
+ if (fillFromEmulator) {\r
+ // put into emulator\r
+ flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC;\r
+ for (i = 0; i < 16 * 4; i++) {\r
+ if (i == 1) flags = 0;\r
+ if (i == 16 * 4 - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
+ \r
+ if (mfCGetBlock(i, buf, flags)) {\r
+ PrintAndLog("Cant get block: %d", i);\r
+ break;\r
+ }\r
+ \r
+ if (mfEmlSetMem(buf, i, 1)) {\r
+ PrintAndLog("Cant set emul block: %d", i);\r
+ return 3;\r
+ }\r
+ }\r
+ return 0;\r
+ } else {\r
+ len = strlen(Cmd);\r
+ if (len > 14) len = 14;\r
+ \r
+ if (len < 1) {\r
+ // get filename\r
+ if (mfCGetBlock(0, buf, CSETBLOCK_SINGLE_OPER)) {\r
+ PrintAndLog("Cant get block: %d", 0);\r
+ return 1;\r
+ }\r
+ for (j = 0; j < 7; j++, fnameptr += 2)\r
+ sprintf(fnameptr, "%02x", buf[j]); \r
+ } else {\r
+ memcpy(filename, Cmd, len);\r
+ fnameptr += len;\r
+ }\r
+\r
+ sprintf(fnameptr, ".eml"); \r
+ \r
+ // open file\r
+ f = fopen(filename, "w+");\r
+\r
+ // put hex\r
+ flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC;\r
+ for (i = 0; i < 16 * 4; i++) {\r
+ if (i == 1) flags = 0;\r
+ if (i == 16 * 4 - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
+ \r
+ if (mfCGetBlock(i, buf, flags)) {\r
+ PrintAndLog("Cant get block: %d", i);\r
+ break;\r
+ }\r
+ for (j = 0; j < 16; j++)\r
+ fprintf(f, "%02x", buf[j]); \r
+ fprintf(f,"\n");\r
+ }\r
+ fclose(f);\r
+ \r
+ PrintAndLog("Saved to file: %s", filename);\r
+ \r
+ return 0;\r
+ }\r
+}\r
+\r
+\r
+int CmdHF14AMfSniff(const char *Cmd){\r
+ // params\r
+ bool wantLogToFile = 0;\r
+ bool wantDecrypt = 0;\r
+ //bool wantSaveToEml = 0; TODO\r
+ bool wantSaveToEmlFile = 0;\r
+\r
+ //var \r
+ int res = 0;\r
+ int len = 0;\r
+ int blockLen = 0;\r
+ int num = 0;\r
+ int pckNum = 0;\r
+ uint8_t uid[7];\r
+ uint8_t uid_len;\r
+ uint8_t atqa[2];\r
+ uint8_t sak;\r
+ bool isTag;\r
+ uint8_t buf[3000];\r
+ uint8_t * bufPtr = buf;\r
+ memset(buf, 0x00, 3000);\r
+ \r
+ if (param_getchar(Cmd, 0) == 'h') {\r
+ PrintAndLog("It continuously gets data from the field and saves it to: log, emulator, emulator file.");\r
+ PrintAndLog("You can specify:");\r
+ PrintAndLog(" l - save encrypted sequence to logfile `uid.log`");\r
+ PrintAndLog(" d - decrypt sequence and put it to log file `uid.log`");\r
+ PrintAndLog(" n/a e - decrypt sequence, collect read and write commands and save the result of the sequence to emulator memory");\r
+ PrintAndLog(" r - decrypt sequence, collect read and write commands and save the result of the sequence to emulator dump file `uid.eml`");\r
+ PrintAndLog("Usage: hf mf sniff [l][d][e][r]");\r
+ PrintAndLog(" sample: hf mf sniff l d e");\r
+ return 0;\r
+ } \r
+ \r
+ for (int i = 0; i < 4; i++) {\r
+ char ctmp = param_getchar(Cmd, i);\r
+ if (ctmp == 'l' || ctmp == 'L') wantLogToFile = true;\r
+ if (ctmp == 'd' || ctmp == 'D') wantDecrypt = true;\r
+ //if (ctmp == 'e' || ctmp == 'E') wantSaveToEml = true; TODO\r
+ if (ctmp == 'f' || ctmp == 'F') wantSaveToEmlFile = true;\r
+ }\r
+ \r
+ printf("-------------------------------------------------------------------------\n");\r
+ printf("Executing command. \n");\r
+ printf("Press the key on the proxmark3 device to abort both proxmark3 and client.\n");\r
+ printf("Press the key on pc keyboard to abort the client.\n");\r
+ printf("-------------------------------------------------------------------------\n");\r
+\r
+ UsbCommand c = {CMD_MIFARE_SNIFFER, {0, 0, 0}};\r
+ clearCommandBuffer();\r
+ SendCommand(&c);\r
+\r
+ // wait cycle\r
+ while (true) {\r
+ printf(".");\r
+ fflush(stdout);\r
+ if (ukbhit()) {\r
+ getchar();\r
+ printf("\naborted via keyboard!\n");\r
+ break;\r
+ }\r
+ \r
+ UsbCommand resp;\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,2000)) {\r
+ res = resp.arg[0] & 0xff;\r
+ len = resp.arg[1];\r
+ num = resp.arg[2];\r
+ \r
+ if (res == 0) return 0;\r
+ if (res == 1) {\r
+ if (num ==0) {\r
+ bufPtr = buf;\r
+ memset(buf, 0x00, 3000);\r
+ }\r
+ memcpy(bufPtr, resp.d.asBytes, len);\r
+ bufPtr += len;\r
+ pckNum++;\r
+ }\r
+ if (res == 2) {\r
+ blockLen = bufPtr - buf;\r
+ bufPtr = buf;\r
+ printf(">\n");\r
+ PrintAndLog("received trace len: %d packages: %d", blockLen, pckNum);\r
+ num = 0;\r
+ while (bufPtr - buf < blockLen) {\r
+ bufPtr += 6; // ignore void timing information\r
+ len = *((uint16_t *)bufPtr);\r
+ if(len & 0x8000) {\r
+ isTag = true;\r
+ len &= 0x7fff;\r
+ } else {\r
+ isTag = false;\r
+ }\r
+ bufPtr += 2;\r
+ if ((len == 14) && (bufPtr[0] == 0xff) && (bufPtr[1] == 0xff) && (bufPtr[12] == 0xff) && (bufPtr[13] == 0xff)) {\r
+ memcpy(uid, bufPtr + 2, 7);\r
+ memcpy(atqa, bufPtr + 2 + 7, 2);\r
+ uid_len = (atqa[0] & 0xC0) == 0x40 ? 7 : 4;\r
+ sak = bufPtr[11];\r
+ \r
+ PrintAndLog("tag select uid:%s atqa:0x%02x%02x sak:0x%02x", \r
+ sprint_hex(uid + (7 - uid_len), uid_len),\r
+ atqa[1], \r
+ atqa[0], \r
+ sak);\r
+ if (wantLogToFile || wantDecrypt) {\r
+ FillFileNameByUID(logHexFileName, uid + (7 - uid_len), ".log", uid_len);\r
+ AddLogCurrentDT(logHexFileName);\r
+ } \r
+ if (wantDecrypt) mfTraceInit(uid, atqa, sak, wantSaveToEmlFile);\r
+ } else {\r
+ PrintAndLog("%s(%d):%s", isTag ? "TAG":"RDR", num, sprint_hex(bufPtr, len));\r
+ if (wantLogToFile) AddLogHex(logHexFileName, isTag ? "TAG: ":"RDR: ", bufPtr, len);\r
+ if (wantDecrypt) mfTraceDecode(bufPtr, len, wantSaveToEmlFile);\r
+ }\r
+ bufPtr += len;\r
+ bufPtr += ((len-1)/8+1); // ignore parity\r
+ num++;\r
+ }\r
+ }\r
+ } // resp not NILL\r
+ } // while (true)\r
+ \r
+ return 0;\r
+}\r
+\r
static command_t CommandTable[] =\r
{\r
{"help", CmdHelp, 1, "This help"},\r
{"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},\r
{"rdbl", CmdHF14AMfRdBl, 0, "Read MIFARE classic block"},\r
+ {"urdbl", CmdHF14AMfURdBl, 0, "Read MIFARE Ultralight block"},\r
+ {"urdcard", CmdHF14AMfURdCard, 0,"Read MIFARE Ultralight Card"},\r
+ {"uwrbl", CmdHF14AMfUWrBl, 0,"Write MIFARE Ultralight block"},\r
{"rdsc", CmdHF14AMfRdSc, 0, "Read MIFARE classic sector"},\r
{"dump", CmdHF14AMfDump, 0, "Dump MIFARE classic tag to binary file"},\r
{"restore", CmdHF14AMfRestore, 0, "Restore MIFARE classic binary file to BLANK tag"},\r
{"wrbl", CmdHF14AMfWrBl, 0, "Write MIFARE classic block"},\r
{"chk", CmdHF14AMfChk, 0, "Test block keys"},\r
- {"mifare", CmdHF14AMifare, 0, "Read parity error messages. param - <used card nonce>"},\r
+ {"mifare", CmdHF14AMifare, 0, "Read parity error messages."},\r
{"nested", CmdHF14AMfNested, 0, "Test nested authentication"},\r
+ {"sniff", CmdHF14AMfSniff, 0, "Sniff card-reader communication"},\r
{"sim", CmdHF14AMf1kSim, 0, "Simulate MIFARE card"},\r
- {"eclr", CmdHF14AMfEClear, 0, "Clear simulator memory block"},\r
+ {"eclr", CmdHF14AMfEClear, 0, "Clear simulator memory block"},\r
{"eget", CmdHF14AMfEGet, 0, "Get simulator memory block"},\r
{"eset", CmdHF14AMfESet, 0, "Set simulator memory block"},\r
{"eload", CmdHF14AMfELoad, 0, "Load from file emul dump"},\r
{"esave", CmdHF14AMfESave, 0, "Save to file emul dump"},\r
{"ecfill", CmdHF14AMfECFill, 0, "Fill simulator memory with help of keys from simulator"},\r
- {"ekeyprn", CmdHF14AMfEKeyPrn, 0, "Print keys from simulator memory"},\r
- {"csetuid", CmdHF14AMfCSetUID, 0, "Set UID for magic Chinese card"},\r
- {"csetblk", CmdHF14AMfCSetBlk, 0, "Write block into magic Chinese card"},\r
+ {"ekeyprn", CmdHF14AMfEKeyPrn, 0, "Print keys from simulator memory"},\r
+ {"csetuid", CmdHF14AMfCSetUID, 0, "Set UID for magic Chinese card"},\r
+ {"csetblk", CmdHF14AMfCSetBlk, 0, "Write block into magic Chinese card"},\r
+ {"cgetblk", CmdHF14AMfCGetBlk, 0, "Read block from magic Chinese card"},\r
+ {"cgetsc", CmdHF14AMfCGetSc, 0, "Read sector from magic Chinese card"},\r
{"cload", CmdHF14AMfCLoad, 0, "Load dump into magic Chinese card"},\r
+ {"csave", CmdHF14AMfCSave, 0, "Save dump from magic Chinese card into file or emulator"},\r
{NULL, NULL, 0, NULL}\r
};\r
\r
int CmdHFMF(const char *Cmd)\r
{\r
// flush\r
- while (WaitForResponseTimeout(CMD_ACK, 500) != NULL) ;\r
+ WaitForResponseTimeout(CMD_ACK,NULL,100);\r
\r
CmdsParse(CommandTable, Cmd);\r
return 0;\r
projects / proxmark3-svn / blobdiff