-
--[[
This is a library to read 14443b tags. It can be used something like this
-- Loads the commands-library
local cmds = require('commands')
local utils = require('utils')
-local TIMEOUT = 10000 -- Shouldn't take longer than 2 seconds
+local TIMEOUT = 4000
+local ISO14B_COMMAND = {
+ ISO14B_CONNECT = 1,
+ ISO14B_DISCONNECT = 2,
+ ISO14B_APDU = 4,
+ ISO14B_RAW = 8,
+ ISO14B_REQUEST_TRIGGER = 0x10,
+ ISO14B_APPEND_CRC = 0x20,
+ ISO14B_SELECT_STD = 0x40,
+ ISO14B_SELECT_SR = 0x80,
+}
-local function parse1443b_reqb(data)
+local function parse1443b(data)
--[[
- --]]
- local pcb = data:sub(1,2)
- local uid = data:sub(3,10)
- local pps = data:sub(11,18)
- local ats = data:sub(19,24)
- local crc = data:sub(25,29)
- return { pcb = pcb, uid = uid, pps = pps, ats = ats, crc = crc, cid = '' }
-end
+
+ Based on this struct :
+
+ typedef struct {
+ byte_t uid[10];
+ byte_t uidlen;
+ byte_t atqb[7];
+ byte_t chipid;
+ byte_t cid;
+ } __attribute__((__packed__)) iso14b_card_select_t;
-local function parse1443b_attrib(data)
- --[[
--]]
- local attrib = data:sub(1,2)
- local crc = data:sub(3,7)
- return { attrib = attrib, crc = crc }
+
+ local count, uid, uidlen, atqb, chipid, cid = bin.unpack('H10CH7CC',data)
+ uid = uid:sub(1,2*uidlen)
+ return { uid = uid, uidlen = uidlen, atqb = atqb, chipid = chipid, cid = cid }
end
-
--- Sends a USBpacket to the device
-- @param command - the usb packet to send
--- @param readresponse - if set to true, we read the device answer packet
+-- @param ignoreresponse - if set to true, we don't read the device answer packet
-- which is usually recipe for fail. If not sent, the host will wait 2s for a
-- response of type CMD_ACK
-- @return packet,nil if successfull
-- nil, errormessage if unsuccessfull
-local function sendToDevice(cmd, readresponse)
- core.clearCommandBuffer()
+local function sendToDevice(cmd, ignoreresponse)
+ --core.clearCommandBuffer()
+ local bytes = cmd:getBytes()
+ local count,c,arg0,arg1,arg2 = bin.unpack('LLLL',bytes)
local err = core.SendCommand(cmd:getBytes())
if err then
- print(err)
+ print('ERROR',err)
return nil, err
end
- if readresponse == 0 then return '',nil end
+ if ignoreresponse then return nil,nil end
+
local response = core.WaitForResponseTimeout(cmds.CMD_ACK, TIMEOUT)
- if response == nil then return nil, nil end
return response,nil
end
--- Picks out and displays the data read from a tag
-- @param usbpacket the data received from the device
local function showData(usbpacket)
local response = Command.parse(usbpacket)
- local len = tonumber(response.arg1) * 2
+ local len = response.arg2 * 2
local data = string.sub(response.data, 0, len);
print("<< ",data)
end
----
--- Sends a usbpackage , "hf 14b raw" and the 14bCrc is added to the rawdata before sending
-local function sendRaw(rawdata, readresponse, addcrc)
- -- add crc first
- local rawdata_crc = rawdata
- if ( addcrc == 1) then
- rawdata_crc = utils.Crc14b(rawdata)
- end
- print(">> ", rawdata_crc)
-
- local command = Command:new{cmd = cmds.CMD_ISO_14443B_COMMAND,
- arg1 = #rawdata_crc/2, -- LEN of data, which is half the length of the ASCII-string rawdata
- arg2 = readresponse, -- read response
- arg3 = 1, -- leave power on
- data = rawdata_crc} -- raw data bytes
- return sendToDevice(command, readresponse)
-end
-- This function does a connect and retrieves some info
-- @return if successfull: an table containing card info
-- @return if unsuccessfull : nil, error
+local function read14443b(disconnect)
--- void SendRawCommand14443B(uint32_t datalen, uint32_t recv, uint8_t powerfield, uint8_t data[])
-local function select1443b()
+ local command, result, info, err, data
- local result, infoReqb, infoAttrib, infoPong, err, resp, len, data
- local goodReqbResponse = false
- --REQB
- local p = 5
- while p > 0 do
- -- 05 00 08
- -- 05
- -- command (REQB/WUPB)
- -- 00
- -- AFI application family identifier ( 00 == all sorts)
- -- 08 (ie WUPB)
- -- bit 0-1-2 | N slots ( 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 == 16)
- -- bit 3 | (1== WUPB, 0 == REQB)
- -- bit 4-5-6-7 | AFI application family identifier
- local result, err = sendRaw('050000', 1, 1)
- if result then
- resp = Command.parse( result )
- len = tonumber(resp.arg1) * 2
- local data = string.sub(resp.data, 0, len)
- if ( resp.arg1 == 14 ) then
- --print ('DATA ::', data)
- infoReqb, err = parse1443b_reqb(data)
- --print(infoReqb.pcb, infoReqb.uid, infoReqb.pps, infoReqb.ats, infoReqb.crc)
- goodReqbResponse = true
- break -- break while loop. REQB got a good response
- end
- end
-
- -- send some strange 0A/0C
- if ( p < 3) then
- sendRaw('0A', 0, 0)
- sendRaw('0C', 0, 0)
- end
-
- p = p - 1
- print('retrying')
+ local flags = ISO14B_COMMAND.ISO14B_CONNECT +
+ ISO14B_COMMAND.ISO14B_SELECT_STD
+
+ if disconnect then
+ print('DISCONNECT')
+ flags = flags + ISO14B_COMMAND.ISO14B_DISCONNECT
end
- if goodReqbResponse == false then
- err = "No response from card"
- print(err)
- return nil, err
- end
- --SLOT MARKER
- -- result, err = sendRaw('05', 1, 1)
- -- if result then
- -- showData(result)
- -- resp = Command.parse( result )
- -- if arg1 == 0 then
- -- return nil, "iso14443b card - SLOT MARKER failed"
- -- end
- -- len = tonumber(resp.arg1) * 2
- -- data = string.sub(resp.data, 0, len)
- -- infoAttrib, err = parse1443b_attrib(data)
- -- print( infoAttrib.attrib, infoAttrib.crc)
- -- else
- -- err ="No response from card"
- -- print(err)
- -- return nil, err
- -- end
-
- --ATTRIB
- local cid = '00'
- result, err = sendRaw('1D'..infoReqb.uid..'000801'..cid, 1, 1)
+ command = Command:new{cmd = cmds.CMD_ISO_14443B_COMMAND, arg1 = flags}
+ local result,err = sendToDevice(command, false)
if result then
- showData(result)
- resp = Command.parse( result )
- if resp.arg1 == 0 then
- return nil, "iso14443b card - ATTRIB failed"
+ local count,cmd,arg0,arg1,arg2 = bin.unpack('LLLL',result)
+ if arg0 == 0 then
+ data = string.sub(result, count)
+ info, err = parse1443b(data)
+ else
+ err = "iso14443b card select failed"
end
- len = tonumber(resp.arg1) * 2
- data = string.sub(resp.data, 0, len)
- infoAttrib, err = parse1443b_attrib(data)
- infoReqb.cid = infoAttrib.attrib:sub(2,2)
- else
- err ="No response from card"
- print(err)
- return nil, err
- end
-
- --PING / PONG - Custom Anticollison for Navigo.
- local ping = ('BA00')
- result, err = sendRaw(ping, 1, 1)
- if result then
- resp = Command.parse( result )
- if arg1 == 0 then
- return nil, "iso14443b card - PING/PONG failed"
- end
- showData(result)
else
err = "No response from card"
+ end
+
+ if err then
print(err)
return nil, err
end
-
- return infoReqb
+ return info
end
+--PING / PONG - Custom Anticollison for Navigo.
+-- AA / BB ?!?
+-- local ping = ('BA00')
+-- result, err = sendRaw(ping, 1, 1)
+-- if result then
+ -- resp = Command.parse( result )
+ -- if arg1 == 0 then
+ -- return nil, "iso14443b card - PING/PONG failed"
+ -- end
+ -- showData(result)
+-- else
+ -- err = "No response from card"
+ -- print(err)
+ -- return nil, err
+-- end
+
---
-- Waits for a mifare card to be placed within the vicinity of the reader.
local function waitFor14443b()
print("Waiting for card... press any key to quit")
while not core.ukbhit() do
- res, err = select1443b()
+ res, err = read14443b(false)
if res then return res end
-- err means that there was no response from card
end
return nil, "Aborted by user"
end
-local function disconnect(uid)
-
- local halt = ('50'..uid) -- 50 UID0 UID1 UID2 UID3 CRC1 CRC2
- result, err = sendRaw(halt, 1, 1)
- if result then
- resp = Command.parse( result )
- showData(result) -- expected answer is 00 CRC1 CRC2
- else
- err = "No response from card"
- print(err)
- return nil, err
- end
-
- -- shutdown raw command / pm3 device.
- local command = Command:new{ cmd = cmds.CMD_ISO_14443B_COMMAND, arg1 = 0, arg2 = 0, arg3 = 0 }
- -- We can ignore the response here, no ACK is returned for this command
- -- Check /armsrc/iso14443b.c, SendRawCommand14443B() for details
- return sendToDevice(command, 0)
-end
-
local library = {
- select1443b = select1443b,
- select = select1443b,
+ parse1443b = parse1443b,
+ read1443b = read14443b,
waitFor14443b = waitFor14443b,
sendToDevice = sendToDevice,
- disconnect = disconnect,
- sendRaw = sendRaw,
showData = showData,
+ ISO14B_COMMAND = ISO14B_COMMAND,
}
return library
\ No newline at end of file
projects / proxmark3-svn / blobdiff