struct Crypto1State *pcs;\r
pcs = &mpcs;\r
\r
- // clear trace\r
- clear_trace();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
bool turnOffField = (arg0 == 1);\r
\r
LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
- clear_trace();\r
+\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
if(!iso14443a_select_card(NULL, NULL, NULL)) {\r
if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");\r
OnError(0);\r
\r
LEDsoff();\r
LED_A_ON();\r
- clear_trace();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
int len = iso14443a_select_card(NULL, NULL, NULL);\r
if(!len) {\r
if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%02X)",len);\r
struct Crypto1State *pcs;\r
pcs = &mpcs;\r
\r
- // clear trace\r
- clear_trace();\r
-\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
// datain = KEY bytes\r
void MifareUReadCard(uint8_t arg0, uint16_t arg1, uint8_t arg2, uint8_t *datain)\r
{\r
+ LEDsoff();\r
+ LED_A_ON();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+\r
// free eventually allocated BigBuf memory\r
BigBuf_free();\r
- // clear trace\r
clear_trace();\r
\r
// params\r
return;\r
}\r
\r
- LEDsoff();\r
- LED_A_ON();\r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
-\r
int len = iso14443a_select_card(NULL, NULL, NULL);\r
if (!len) {\r
if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%d)",len);\r
struct Crypto1State *pcs;\r
pcs = &mpcs;\r
\r
- // clear trace\r
- clear_trace();\r
-\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
LEDsoff();\r
}\r
\r
-void MifareUWriteBlock(uint8_t arg0, uint8_t *datain)\r
+/* // Command not needed but left for future testing \r
+void MifareUWriteBlockCompat(uint8_t arg0, uint8_t *datain)\r
{\r
uint8_t blockNo = arg0;\r
byte_t blockdata[16] = {0x00};\r
return;\r
};\r
\r
- if(mifare_ultra_writeblock(blockNo, blockdata)) {\r
+ if(mifare_ultra_writeblock_compat(blockNo, blockdata)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
OnError(0);\r
return; };\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
}\r
+*/\r
\r
// Arg0 : Block to write to.\r
// Arg1 : 0 = use no authentication.\r
// 2 = use 0x1B authentication.\r
// datain : 4 first bytes is data to be written.\r
// : 4/16 next bytes is authentication key.\r
-void MifareUWriteBlock_Special(uint8_t arg0, uint8_t arg1, uint8_t *datain)\r
+void MifareUWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t *datain)\r
{\r
uint8_t blockNo = arg0;\r
bool useKey = (arg1 == 1); //UL_C\r
\r
LEDsoff();\r
LED_A_ON();\r
- clear_trace();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
if(!iso14443a_select_card(NULL, NULL, NULL)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
OnError(0);\r
}\r
}\r
\r
- if(mifare_ultra_special_writeblock(blockNo, blockdata)) {\r
+ if(mifare_ultra_writeblock(blockNo, blockdata)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
OnError(0);\r
return;\r
memcpy(pwd, datain, 16);\r
\r
LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
- clear_trace();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
if(!iso14443a_select_card(NULL, NULL, NULL)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
OnError(0);\r
blockdata[1] = pwd[6];\r
blockdata[2] = pwd[5];\r
blockdata[3] = pwd[4];\r
- if(mifare_ultra_special_writeblock( 44, blockdata)) {\r
+ if(mifare_ultra_writeblock( 44, blockdata)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
OnError(44);\r
return;\r
blockdata[1] = pwd[2];\r
blockdata[2] = pwd[1];\r
blockdata[3] = pwd[0];\r
- if(mifare_ultra_special_writeblock( 45, blockdata)) {\r
+ if(mifare_ultra_writeblock( 45, blockdata)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
OnError(45);\r
return;\r
blockdata[1] = pwd[14];\r
blockdata[2] = pwd[13];\r
blockdata[3] = pwd[12];\r
- if(mifare_ultra_special_writeblock( 46, blockdata)) {\r
+ if(mifare_ultra_writeblock( 46, blockdata)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
OnError(46);\r
return;\r
blockdata[1] = pwd[10];\r
blockdata[2] = pwd[9];\r
blockdata[3] = pwd[8];\r
- if(mifare_ultra_special_writeblock( 47, blockdata)) {\r
+ if(mifare_ultra_writeblock( 47, blockdata)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
OnError(47);\r
return;\r
uint32_t auth1_time, auth2_time;\r
static uint16_t delta_time;\r
\r
- // free eventually allocated BigBuf memory\r
- BigBuf_free();\r
- // clear trace\r
- clear_trace();\r
- set_tracing(false);\r
- \r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
-\r
LED_A_ON();\r
LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ // free eventually allocated BigBuf memory\r
+ BigBuf_free();\r
\r
+ if (calibrate) clear_trace();\r
+ set_tracing(true);\r
+ \r
// statistics on nonce distance\r
+ int16_t isOK = 0;\r
+ #define NESTED_MAX_TRIES 12\r
+ uint16_t unsuccessfull_tries = 0;\r
if (calibrate) { // for first call only. Otherwise reuse previous calibration\r
LED_B_ON();\r
WDT_HIT();\r
\r
for (rtr = 0; rtr < 17; rtr++) {\r
\r
+ // Test if the action was cancelled\r
+ if(BUTTON_PRESS()) {\r
+ isOK = -2;\r
+ break;\r
+ }\r
+\r
// prepare next select. No need to power down the card.\r
if(mifare_classic_halt(pcs, cuid)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Nested: Halt error");\r
delta_time = auth2_time - auth1_time + 32; // allow some slack for proper timing\r
}\r
if (MF_DBGLEVEL >= 3) Dbprintf("Nested: calibrating... ntdist=%d", i);\r
+ } else {\r
+ unsuccessfull_tries++;\r
+ if (unsuccessfull_tries > NESTED_MAX_TRIES) { // card isn't vulnerable to nested attack (random numbers are not predictable)\r
+ isOK = -3;\r
+ }\r
}\r
}\r
- \r
- if (rtr <= 1) return;\r
\r
davg = (davg + (rtr - 1)/2) / (rtr - 1);\r
\r
- if (MF_DBGLEVEL >= 3) Dbprintf("min=%d max=%d avg=%d, delta_time=%d", dmin, dmax, davg, delta_time);\r
+ if (MF_DBGLEVEL >= 3) Dbprintf("rtr=%d isOK=%d min=%d max=%d avg=%d, delta_time=%d", rtr, isOK, dmin, dmax, davg, delta_time);\r
\r
dmin = davg - 2;\r
dmax = davg + 2;\r
LED_B_OFF();\r
\r
}\r
-// ------------------------------------------------------------------------------------------------- \r
+ // ------------------------------------------------------------------------------------------------- \r
\r
LED_C_ON();\r
\r
// get crypted nonces for target sector\r
- for(i=0; i < 2; i++) { // look for exactly two different nonces\r
+ for(i=0; i < 2 && !isOK; i++) { // look for exactly two different nonces\r
\r
target_nt[i] = 0;\r
while(target_nt[i] == 0) { // continue until we have an unambiguous nonce\r
\r
// nested authentication\r
auth2_time = auth1_time + delta_time;\r
- len = mifare_sendcmd_shortex(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, par, &auth2_time);\r
+ len = mifare_sendcmd_short(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, par, &auth2_time);\r
if (len != 4) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Nested: Auth2 error len=%d", len);\r
continue;\r
memcpy(buf+16, &target_ks[1], 4);\r
\r
LED_B_ON();\r
- cmd_send(CMD_ACK, 0, 2, targetBlockNo + (targetKeyType * 0x100), buf, sizeof(buf));\r
+ cmd_send(CMD_ACK, isOK, 0, targetBlockNo + (targetKeyType * 0x100), buf, sizeof(buf));\r
LED_B_OFF();\r
\r
if (MF_DBGLEVEL >= 3) DbpString("NESTED FINISHED");\r
\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
- set_tracing(TRUE);\r
}\r
\r
//-----------------------------------------------------------------------------\r
// MIFARE check keys. key count up to 85. \r
// \r
//-----------------------------------------------------------------------------\r
-void MifareChkKeys(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)\r
+void MifareChkKeys(uint16_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)\r
{\r
// params\r
- uint8_t blockNo = arg0;\r
- uint8_t keyType = arg1;\r
+ uint8_t blockNo = arg0 & 0xff;\r
+ uint8_t keyType = (arg0 >> 8) & 0xff;\r
+ bool clearTrace = arg1;\r
uint8_t keyCount = arg2;\r
uint64_t ui64Key = 0;\r
\r
int OLD_MF_DBGLEVEL = MF_DBGLEVEL; \r
MF_DBGLEVEL = MF_DBG_NONE;\r
\r
- // clear trace\r
- clear_trace();\r
- set_tracing(TRUE);\r
-\r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
-\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+\r
+ if (clearTrace) clear_trace();\r
+ set_tracing(TRUE);\r
\r
for (i = 0; i < keyCount; i++) {\r
if(mifare_classic_halt(pcs, cuid)) {\r
//-----------------------------------------------------------------------------\r
// Work with emulator memory\r
// \r
+// Note: we call FpgaDownloadAndGo(FPGA_BITSTREAM_HF) here although FPGA is not\r
+// involved in dealing with emulator memory. But if it is called later, it might\r
+// destroy the Emulator Memory.\r
//-----------------------------------------------------------------------------\r
+\r
void MifareEMemClr(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);\r
emlClearMem();\r
}\r
\r
void MifareEMemSet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);\r
emlSetMem(datain, arg0, arg1); // data, block num, blocks count\r
}\r
\r
void MifareEMemGet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);\r
byte_t buf[USB_CMD_DATA_SIZE];\r
emlGetMem(buf, arg0, arg1); // data, block num, blocks count (max 4)\r
\r
byte_t dataoutbuf2[16];\r
uint8_t uid[10];\r
\r
- // clear trace\r
- clear_trace();\r
- set_tracing(false);\r
- \r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
-\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+ \r
+ clear_trace();\r
+ set_tracing(false);\r
\r
bool isOK = true;\r
\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
set_tracing(TRUE);\r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
}\r
\r
while (true) {\r
// bit 2 - need HALT after sequence\r
// bit 3 - need init FPGA and field before sequence\r
// bit 4 - need reset FPGA and LED\r
+ // bit 5 - need to set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)\r
uint8_t workFlags = arg0;\r
uint8_t blockNo = arg2;\r
\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
- \r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+\r
clear_trace();\r
set_tracing(TRUE);\r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
}\r
\r
while (true) {\r
}\r
\r
LED_B_ON();\r
- cmd_send(CMD_ACK,isOK,0,0,data,18);\r
+ if (workFlags & 0x20) {\r
+ if (isOK)\r
+ memcpy(datain, data, 18);\r
+ }\r
+ else\r
+ cmd_send(CMD_ACK,isOK,0,0,data,18);\r
LED_B_OFF();\r
\r
if ((workFlags & 0x10) || (!isOK)) {\r
cmd_send(CMD_ACK,isOK,0,0,0,0);\r
}\r
\r
- //\r
+//\r
// DESFIRE\r
//\r
\r
uint8_t uid[10] = {0x00};\r
uint32_t cuid;\r
\r
- clear_trace();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+ clear_trace();\r
\r
int len = iso14443a_select_card(uid, NULL, &cuid);\r
if(!len) {\r
isOK = mifare_desfire_des_auth2(cuid, key, dataout);\r
\r
if( isOK) {\r
- if (MF_DBGLEVEL >= MF_DBG_EXTENDED) \r
- Dbprintf("Authentication part2: Failed"); \r
- //OnError(4);\r
+ if (MF_DBGLEVEL >= MF_DBG_EXTENDED) Dbprintf("Authentication part2: Failed"); \r
+ OnError(4);\r
return;\r
}\r
\r
- if (MF_DBGLEVEL >= MF_DBG_EXTENDED) \r
- DbpString("AUTH 2 FINISHED");\r
+ if (MF_DBGLEVEL >= MF_DBG_EXTENDED) DbpString("AUTH 2 FINISHED");\r
\r
cmd_send(CMD_ACK, isOK, 0, 0, dataout, sizeof(dataout));\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
projects / proxmark3-svn / blobdiff