#include "mifare.h"
#include "util.h"
#include "../common/protocols.h"
+#include "data.h"
#define MAX_UL_BLOCKS 0x0f
-#define MAX_ULC_BLOCKS 0x2f
-#define MAX_ULEV1a_BLOCKS 0x0b
-#define MAX_ULEV1b_BLOCKS 0x20
+#define MAX_ULC_BLOCKS 0x2b
+#define MAX_ULEV1a_BLOCKS 0x13
+#define MAX_ULEV1b_BLOCKS 0x28
+#define MAX_NTAG_203 0x29
+#define MAX_NTAG_210 0x13
+#define MAX_NTAG_212 0x28
#define MAX_NTAG_213 0x2c
#define MAX_NTAG_215 0x86
-#define MAX_NTAG_216 0xe6
+#define MAX_NTAG_216 0xe6
#define KEYS_3DES_COUNT 7
uint8_t default_3des_keys[KEYS_3DES_COUNT][16] = {
{ 0x49,0x45,0x4D,0x4B,0x41,0x45,0x52,0x42,0x21,0x4E,0x41,0x43,0x55,0x4F,0x59,0x46 },// NFC-key
{ 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 },// all ones
{ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF },// all FF
- { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF } // 11 22 33
+ { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF },// 11 22 33
};
-#define KEYS_PWD_COUNT 8
+#define KEYS_PWD_COUNT 10
uint8_t default_pwd_pack[KEYS_PWD_COUNT][4] = {
{0xFF,0xFF,0xFF,0xFF}, // PACK 0x00,0x00 -- factory default
+
{0x4A,0xF8,0x4B,0x19}, // PACK 0xE5,0xBE -- italian bus (sniffed)
{0x33,0x6B,0xA1,0x19}, // PACK 0x9c,0x2d -- italian bus (sniffed)
{0xFF,0x90,0x6C,0xB2}, // PACK 0x12,0x9e -- italian bus (sniffed)
+ {0x46,0x1c,0xA3,0x19}, // PACK 0xE9,0x5A -- italian bus (sniffed)
+ {0x35,0x1C,0xD0,0x19}, // PACK 0x9A,0x5a -- italian bus (sniffed)
+
{0x05,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- Amiiboo (sniffed) pikachu-b UID:
{0x7E,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
{0x02,0xE1,0xEE,0x36}, // PACK 0x80,0x80 -- AMiiboo (sniffed) sonic UID: 04d257 7ae33e8027
{0x32,0x0C,0x16,0x17}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
};
+#define MAX_UL_TYPES 16
+uint16_t UL_TYPES_ARRAY[MAX_UL_TYPES] = {UNKNOWN, UL, UL_C, UL_EV1_48, UL_EV1_128, NTAG, NTAG_203,
+ NTAG_210, NTAG_212, NTAG_213, NTAG_215, NTAG_216, MY_D, MY_D_NFC, MY_D_MOVE, MY_D_MOVE_NFC};
+
+uint8_t UL_MEMORY_ARRAY[MAX_UL_TYPES] = {MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_ULC_BLOCKS, MAX_ULEV1a_BLOCKS,
+ MAX_ULEV1b_BLOCKS, MAX_NTAG_203, MAX_NTAG_203, MAX_NTAG_210, MAX_NTAG_212, MAX_NTAG_213,
+ MAX_NTAG_215, MAX_NTAG_216, MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_UL_BLOCKS};
+
+
static int CmdHelp(const char *Cmd);
char* getProductTypeStr( uint8_t id){
char *retStr = buf;
switch(id) {
- case 3:
- sprintf(retStr, "%02X, %s", id, "Ultralight");
- break;
- case 4:
- sprintf(retStr, "%02X, %s", id, "NTAG");
- break;
- default:
- sprintf(retStr, "%02X, %s", id, "unknown");
- break;
+ case 3: sprintf(retStr, "%02X, Ultralight", id); break;
+ case 4: sprintf(retStr, "%02X, NTAG", id); break;
+ default: sprintf(retStr, "%02X, unknown", id); break;
}
return buf;
}
// is LSB set?
if ( fsize & 1 )
- sprintf(retStr, "%02X (%u <-> %u bytes)", fsize, usize, lsize);
+ sprintf(retStr, "%02X, (%u <-> %u bytes)", fsize, usize, lsize);
else
- sprintf(retStr, "%02X (%u bytes)", fsize, lsize);
+ sprintf(retStr, "%02X, (%u bytes)", fsize, lsize);
return buf;
}
ul_switch_on_field();
UsbCommand resp;
- if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
- if (resp.arg[0] < 1) return -1;
+ bool ans = false;
+ ans = WaitForResponseTimeout(CMD_ACK, &resp, 1500);
+ if (!ans || resp.arg[0] < 1) {
+ PrintAndLog("iso14443a card select failed");
+ ul_switch_off_field();
+ return 0;
+ }
memcpy(card, resp.d.asBytes, sizeof(iso14a_card_select_t));
- return resp.arg[0];
+ return 1;
}
// This read command will at least return 16bytes.
uint8_t cmd[] = {ISO14443A_CMD_READBLOCK, page};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
- if ( len == -1 )
- ul_switch_off_field();
return len;
}
memcpy(cmd+2, data, datalen);
uint8_t response[1] = {0xff};
- int len = ul_send_cmd_raw(cmd, 2+datalen, response, sizeof(response));
- if ( len == -1 )
- ul_switch_off_field();
+ ul_send_cmd_raw(cmd, 2+datalen, response, sizeof(response));
// ACK
if ( response[0] == 0x0a ) return 0;
// NACK
uint8_t cmd[] = {MIFARE_ULC_AUTH_1, 0x00};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), nonce, nonceLength);
- if ( len == -1 )
- ul_switch_off_field();
return len;
}
+static int ulc_authentication( uint8_t *key, bool switch_off_field ){
+
+ UsbCommand c = {CMD_MIFAREUC_AUTH, {switch_off_field}};
+ memcpy(c.d.asBytes, key, 16);
+ SendCommand(&c);
+ UsbCommand resp;
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) return 0;
+ if ( resp.arg[0] == 1 ) return 1;
+
+ return 0;
+}
+
static int ulev1_requestAuthentication( uint8_t *pwd, uint8_t *pack, uint16_t packLength ){
uint8_t cmd[] = {MIFARE_ULEV1_AUTH, pwd[0], pwd[1], pwd[2], pwd[3]};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), pack, packLength);
- if ( len == -1)
- ul_switch_off_field();
return len;
}
+static int ul_auth_select( iso14a_card_select_t *card, TagTypeUL_t tagtype, bool hasAuthKey, uint8_t *authenticationkey, uint8_t *pack, uint8_t packSize){
+ if ( hasAuthKey && (tagtype & UL_C)) {
+ //will select card automatically and close connection on error
+ if (!ulc_authentication(authenticationkey, false)) {
+ PrintAndLog("Error: Authentication Failed UL-C");
+ return 0;
+ }
+ } else {
+ if ( !ul_select(card) ) return 0;
+
+ if (hasAuthKey) {
+ if (ulev1_requestAuthentication(authenticationkey, pack, packSize) < 1) {
+ ul_switch_off_field();
+ PrintAndLog("Error: Authentication Failed UL-EV1/NTAG");
+ return 0;
+ }
+ }
+ }
+ return 1;
+}
+
static int ulev1_getVersion( uint8_t *response, uint16_t responseLength ){
uint8_t cmd[] = {MIFARE_ULEV1_VERSION};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
- if ( len == -1 )
- ul_switch_off_field();
return len;
}
// uint8_t cmd[] = {MIFARE_ULEV1_FASTREAD, startblock, endblock};
// if ( !ul_send_cmd_raw(cmd, sizeof(cmd), response)){
- // ul_switch_off_field();
// return -1;
// }
// return 0;
uint8_t cmd[] = {MIFARE_ULEV1_READ_CNT, counter};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
- if (len == -1)
- ul_switch_off_field();
return len;
}
uint8_t cmd[] = {MIFARE_ULEV1_CHECKTEAR, counter};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
- if (len == -1)
- ul_switch_off_field();
return len;
}
uint8_t cmd[] = {MIFARE_ULEV1_READSIG, 0x00};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
- if (len == -1)
- ul_switch_off_field();
return len;
}
uid[6] = data[7];
PrintAndLog(" UID : %s ", sprint_hex(uid, 7));
- PrintAndLog(" UID[0] : %02X, Manufacturer: %s", uid[0], getTagInfo(uid[0]) );
+ PrintAndLog(" UID[0] : %02X, %s", uid[0], getTagInfo(uid[0]) );
if ( uid[0] == 0x05 ) {
uint8_t chip = (data[8] & 0xC7); // 11000111 mask, bit 3,4,5 RFU
switch (chip){
return 0;
}
-static int ntag_print_CC(uint8_t *data) {
-
- PrintAndLog("\n--- NTAG NDEF Message");
-
- if(data[0] != 0xe1) {
- PrintAndLog("no NDEF message found");
- return -1; // no NDEF message
- }
+static int ndef_print_CC(uint8_t *data) {
+ // no NDEF message
+ if(data[0] != 0xe1)
+ return -1;
+ PrintAndLog("--- NDEF Message");
PrintAndLog("Capability Container: %s", sprint_hex(data,4) );
- PrintAndLog(" %02X: NDEF Magic Number", data[0]);
- PrintAndLog(" %02X: version %d.%d supported by tag", data[1], (data[1] & 0xF0) >> 4, data[1] & 0x0f);
- PrintAndLog(" %02X: Physical Memory Size: %d bytes", data[2], (data[2] + 1) * 8);
+ PrintAndLog(" %02X : NDEF Magic Number", data[0]);
+ PrintAndLog(" %02X : version %d.%d supported by tag", data[1], (data[1] & 0xF0) >> 4, data[1] & 0x0f);
+ PrintAndLog(" %02X : Physical Memory Size: %d bytes", data[2], (data[2] + 1) * 8);
if ( data[2] == 0x12 )
- PrintAndLog(" %02X: NDEF Memory Size: %d bytes", data[2], 144);
+ PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data[2], 144);
else if ( data[2] == 0x3e )
- PrintAndLog(" %02X: NDEF Memory Size: %d bytes", data[2], 496);
+ PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data[2], 496);
else if ( data[2] == 0x6d )
- PrintAndLog(" %02X: NDEF Memory Size: %d bytes", data[2], 872);
+ PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data[2], 872);
- PrintAndLog(" %02X: %s / %s", data[3],
+ PrintAndLog(" %02X : %s / %s", data[3],
(data[3] & 0xF0) ? "(RFU)" : "Read access granted without any security",
(data[3] & 0x0F)==0 ? "Write access granted without any security" : (data[3] & 0x0F)==0x0F ? "No write access granted at all" : "(RFU)");
return 0;
}
-int ul_print_type(uint16_t tagtype, uint8_t spaces){
+int ul_print_type(uint32_t tagtype, uint8_t spaces){
char spc[11] = " ";
spc[10]=0x00;
char *spacer = spc + (10-spaces);
PrintAndLog("%sTYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)", spacer);
else if ( tagtype & UL_EV1_128)
PrintAndLog("%sTYPE : MIFARE Ultralight EV1 128bytes (MF0UL2101)", spacer);
+ else if ( tagtype & NTAG )
+ PrintAndLog("%sTYPE : NTAG UNKNOWN", spacer);
+ else if ( tagtype & NTAG_203 )
+ PrintAndLog("%sTYPE : NTAG 203 144bytes (NT2H0301F0DT)", spacer);
+ else if ( tagtype & NTAG_210 )
+ PrintAndLog("%sTYPE : NTAG 210 48bytes (NT2L1011G0DU)", spacer);
+ else if ( tagtype & NTAG_212 )
+ PrintAndLog("%sTYPE : NTAG 212 128bytes (NT2L1211G0DU)", spacer);
else if ( tagtype & NTAG_213 )
- PrintAndLog("%sTYPE : MIFARE NTAG 213 144bytes (NT2H1311G0DU)", spacer);
+ PrintAndLog("%sTYPE : NTAG 213 144bytes (NT2H1311G0DU)", spacer);
else if ( tagtype & NTAG_215 )
- PrintAndLog("%sTYPE : MIFARE NTAG 215 504bytes (NT2H1511G0DU)", spacer);
+ PrintAndLog("%sTYPE : NTAG 215 504bytes (NT2H1511G0DU)", spacer);
else if ( tagtype & NTAG_216 )
- PrintAndLog("%sTYPE : MIFARE NTAG 216 888bytes (NT2H1611G0DU)", spacer);
+ PrintAndLog("%sTYPE : NTAG 216 888bytes (NT2H1611G0DU)", spacer);
+ else if ( tagtype & NTAG_I2C_1K )
+ PrintAndLog("%sTYPE : NTAG I%sC 888bytes (NT3H1101FHK)", spacer, "\xFD");
+ else if ( tagtype & NTAG_I2C_2K )
+ PrintAndLog("%sTYPE : NTAG I%sC 1904bytes (NT3H1201FHK)", spacer, "\xFD");
else if ( tagtype & MY_D )
PrintAndLog("%sTYPE : INFINEON my-d\x99", spacer);
else if ( tagtype & MY_D_NFC )
else if ( tagtype & MY_D_MOVE_NFC )
PrintAndLog("%sTYPE : INFINEON my-d\x99 move NFC", spacer);
else
- PrintAndLog("%sTYPE : Unknown %04x", spacer, tagtype);
+ PrintAndLog("%sTYPE : Unknown %06x", spacer, tagtype);
return 0;
}
static int ulc_print_3deskey( uint8_t *data){
- PrintAndLog(" deskey1 [44/0x2C]: %s [%.4s]", sprint_hex(data ,4),data);
- PrintAndLog(" deskey1 [45/0x2D]: %s [%.4s]", sprint_hex(data+4 ,4),data+4);
- PrintAndLog(" deskey2 [46/0x2E]: %s [%.4s]", sprint_hex(data+8 ,4),data+8);
- PrintAndLog(" deskey2 [47/0x2F]: %s [%.4s]", sprint_hex(data+12,4),data+12);
+ PrintAndLog(" deskey1 [44/0x2C] : %s [%.4s]", sprint_hex(data ,4),data);
+ PrintAndLog(" deskey1 [45/0x2D] : %s [%.4s]", sprint_hex(data+4 ,4),data+4);
+ PrintAndLog(" deskey2 [46/0x2E] : %s [%.4s]", sprint_hex(data+8 ,4),data+8);
+ PrintAndLog(" deskey2 [47/0x2F] : %s [%.4s]", sprint_hex(data+12,4),data+12);
PrintAndLog("\n 3des key : %s", sprint_hex(SwapEndian64(data, 16, 8), 16));
return 0;
}
static int ulc_print_configuration( uint8_t *data){
PrintAndLog("--- UL-C Configuration");
- PrintAndLog(" Higher Lockbits [40/0x28]: %s - %s", sprint_hex(data, 4), printBits(2, data));
- PrintAndLog(" Counter [41/0x29]: %s - %s", sprint_hex(data+4, 4), printBits(2, data+4));
+ PrintAndLog(" Higher Lockbits [40/0x28] : %s - %s", sprint_hex(data, 4), printBits(2, data));
+ PrintAndLog(" Counter [41/0x29] : %s - %s", sprint_hex(data+4, 4), printBits(2, data+4));
bool validAuth = (data[8] >= 0x03 && data[8] <= 0x30);
if ( validAuth )
- PrintAndLog(" Auth0 [42/0x2A]: %s page %d/0x%02X and above need authentication", sprint_hex(data+8, 4), data[8],data[8] );
+ PrintAndLog(" Auth0 [42/0x2A] : %s page %d/0x%02X and above need authentication", sprint_hex(data+8, 4), data[8],data[8] );
else{
if ( data[8] == 0){
- PrintAndLog(" Auth0 [42/0x2A]: %s default", sprint_hex(data+8, 4) );
+ PrintAndLog(" Auth0 [42/0x2A] : %s default", sprint_hex(data+8, 4) );
} else {
- PrintAndLog(" Auth0 [42/0x2A]: %s auth byte is out-of-range", sprint_hex(data+8, 4) );
+ PrintAndLog(" Auth0 [42/0x2A] : %s auth byte is out-of-range", sprint_hex(data+8, 4) );
}
}
- PrintAndLog(" Auth1 [43/0x2B]: %s %s",
+ PrintAndLog(" Auth1 [43/0x2B] : %s %s",
sprint_hex(data+12, 4),
(data[12] & 1) ? "write access restricted": "read and write access restricted"
);
static int ulev1_print_configuration( uint8_t *data){
- PrintAndLog("\n--- UL-EV1 Configuration");
+ PrintAndLog("\n--- Tag Configuration");
bool strg_mod_en = (data[0] & 2);
uint8_t authlim = (data[4] & 0x07);
}
static int ulev1_print_counters(){
- PrintAndLog("--- UL-EV1 Counters");
+ PrintAndLog("--- Tag Counters");
uint8_t tear[1] = {0};
uint8_t counter[3] = {0,0,0};
+ uint16_t len = 0;
for ( uint8_t i = 0; i<3; ++i) {
ulev1_readTearing(i,tear,sizeof(tear));
- ulev1_readCounter(i,counter, sizeof(counter) );
+ len = ulev1_readCounter(i,counter, sizeof(counter) );
+ if (len == 3) {
PrintAndLog(" [%0d] : %s", i, sprint_hex(counter,3));
PrintAndLog(" - %02X tearing %s", tear[0], ( tear[0]==0xBD)?"Ok":"failure");
}
- return 0;
+ }
+ return len;
}
static int ulev1_print_signature( uint8_t *data, uint8_t len){
- PrintAndLog("\n--- UL-EV1 Signature");
- PrintAndLog("IC signature public key name : NXP NTAG21x 2013");
+ PrintAndLog("\n--- Tag Signature");
+ //PrintAndLog("IC signature public key name : NXP NTAG21x 2013"); // don't know if there is other NXP public keys.. :(
PrintAndLog("IC signature public key value : 04494e1a386d3d3cfe3dc10e5de68a499b1c202db5b132393e89ed19fe5be8bc61");
PrintAndLog(" Elliptic curve parameters : secp128r1");
PrintAndLog(" Tag ECC Signature : %s", sprint_hex(data, len));
}
static int ulev1_print_version(uint8_t *data){
- PrintAndLog("\n--- UL-EV1 / NTAG Version");
+ PrintAndLog("\n--- Tag Version");
PrintAndLog(" Raw bytes : %s", sprint_hex(data, 8) );
- PrintAndLog(" Vendor ID : %02X, Manufacturer: %s", data[1], getTagInfo(data[1]));
+ PrintAndLog(" Vendor ID : %02X, %s", data[1], getTagInfo(data[1]));
PrintAndLog(" Product type : %s" , getProductTypeStr(data[2]));
PrintAndLog(" Product subtype : %02X, %s" , data[3], (data[3]==1) ?"17 pF":"50pF");
PrintAndLog(" Major version : %02X" , data[4]);
uint8_t nonce1[11] = {0x00};
uint8_t nonce2[11] = {0x00};
int status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("Error: couldn't select ulc_magic_test");
- ul_switch_off_field();
+ if ( !status ){
return UL_ERROR;
}
status = ulc_requestAuthentication(nonce1, sizeof(nonce1));
// 1) take present UID, and try to write it back. OBSOLETE
// 2) make a wrong length write to page0, and see if tag answers with ACK/NACK:
iso14a_card_select_t card;
- int status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("iso14443a card select failed");
- ul_switch_off_field();
+ if ( !ul_select(&card) )
return UL_ERROR;
- }
- status = ul_comp_write(0, NULL, 0);
+ int status = ul_comp_write(0, NULL, 0);
ul_switch_off_field();
if ( status == 0 )
- return UL_MAGIC;
- return UL;
+ return MAGIC;
+ return 0;
}
-uint16_t GetHF14AMfU_Type(void){
+uint32_t GetHF14AMfU_Type(void){
TagTypeUL_t tagtype = UNKNOWN;
iso14a_card_select_t card;
int status = 0;
int len;
- status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("iso14443a card select failed");
- ul_switch_off_field();
- return UL_ERROR;
- }
+ if (!ul_select(&card)) return UL_ERROR;
+
// Ultralight - ATQA / SAK
if ( card.atqa[1] != 0x00 || card.atqa[0] != 0x44 || card.sak != 0x00 ) {
PrintAndLog("Tag is not Ultralight | NTAG | MY-D [ATQA: %02X %02X SAK: %02X]\n", card.atqa[1], card.atqa[0], card.sak);
if ( card.uid[0] != 0x05) {
len = ulev1_getVersion(version, sizeof(version));
- if (len > -1) ul_switch_off_field(); //if -1 it is already off
+ ul_switch_off_field();
switch (len) {
case 0x0A: {
tagtype = UL_EV1_48;
else if ( version[2] == 0x03 && version[6] != 0x0B )
tagtype = UL_EV1_128;
- else if ( version[2] == 0x04 && version[6] == 0x0F )
+ else if ( version[2] == 0x04 && version[3] == 0x01 && version[6] == 0x0B )
+ tagtype = NTAG_210;
+ else if ( version[2] == 0x04 && version[3] == 0x01 && version[6] == 0x0E )
+ tagtype = NTAG_212;
+ else if ( version[2] == 0x04 && version[3] == 0x02 && version[6] == 0x0F )
tagtype = NTAG_213;
- else if ( version[2] == 0x04 && version[6] == 0x11 )
+ else if ( version[2] == 0x04 && version[3] == 0x02 && version[6] == 0x11 )
tagtype = NTAG_215;
- else if ( version[2] == 0x04 && version[6] == 0x13 )
- tagtype = NTAG_216;
+ else if ( version[2] == 0x04 && version[3] == 0x02 && version[6] == 0x13 )
+ tagtype = NTAG_216;
+ else if ( version[2] == 0x04 && version[3] == 0x05 && version[6] == 0x13 )
+ tagtype = NTAG_I2C_1K;
+ else if ( version[2] == 0x04 && version[3] == 0x05 && version[6] == 0x15 )
+ tagtype = NTAG_I2C_2K;
else if ( version[2] == 0x04 )
tagtype = NTAG;
}
case 0x01: tagtype = UL_C; break;
case 0x00: tagtype = UL; break;
- case -1 : tagtype = (UL | UL_C); break; //when does this happen? -- if getversion fails, it assumes it is either UL/ULC
+ case -1 : tagtype = (UL | UL_C | NTAG_203); break; //when does this happen? -- if getversion fails, it assumes it is either UL/ULC -- but why? magic tags?
default : tagtype = UNKNOWN; break;
}
- // UL-C test
- if (tagtype == (UL | UL_C)) {
- status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("iso14443a card select failed (UL-C)");
- ul_switch_off_field();
- return UL_ERROR;
- }
+ // UL vs UL-C vs ntag203 test
+ if (tagtype & (UL | UL_C | NTAG_203)) {
+ if ( !ul_select(&card) ) return UL_ERROR;
+
+ // do UL_C check first...
uint8_t nonce[11] = {0x00};
status = ulc_requestAuthentication(nonce, sizeof(nonce));
- tagtype = ( status > 0 ) ? UL_C : UL;
-
- if (status != -1) ul_switch_off_field();
+ ul_switch_off_field();
+ if (status > 1) {
+ tagtype = UL_C;
+ } else {
+ // need to re-select after authentication error
+ if ( !ul_select(&card) ) return UL_ERROR;
+
+ uint8_t data[16] = {0x00};
+ // read page 0x26-0x29 (last valid ntag203 page)
+ status = ul_read(0x26, data, sizeof(data));
+ if ( status <= 1 ) {
+ tagtype = UL;
+ } else {
+ // read page 0x30 (should error if it is a ntag203)
+ status = ul_read(30, data, sizeof(data));
+ if ( status <= 1 ){
+ tagtype = NTAG_203;
+ } else {
+ tagtype = UNKNOWN;
+ }
+ }
+ ul_switch_off_field();
+ }
}
} else {
// Infinition MY-D tests Exam high nibble
uint8_t nib = (card.uid[1] & 0xf0) >> 4;
switch ( nib ){
case 1: tagtype = MY_D; break;
- case 2: tagtype = (MY_D | MY_D_NFC); break;
- case 3: tagtype = (MY_D_MOVE | MY_D_MOVE_NFC); break;
+ case 2: tagtype = (MY_D | MY_D_NFC); break; //notice: we can not currently distinguish between these two
+ case 3: tagtype = (MY_D_MOVE | MY_D_MOVE_NFC); break; //notice: we can not currently distinguish between these two
}
}
- tagtype = (ul_magic_test() == UL_MAGIC) ? (tagtype | MAGIC) : tagtype;
- //if ((tagtype & UL)) tagtype = ul_magic_test();
+ tagtype |= ul_magic_test();
+ if (tagtype == (UNKNOWN | MAGIC)) tagtype = (UL_MAGIC);
return tagtype;
}
int status;
bool errors = false;
bool hasAuthKey = false;
+ bool locked = false;
uint8_t cmdp = 0;
uint8_t datalen = 0;
uint8_t authenticationkey[16] = {0x00};
uint8_t pack[4] = {0,0,0,0};
+ int len = 0;
while(param_getchar(Cmd, cmdp) != 0x00)
{
PrintAndLog("-------------------------------------------------------------");
ul_print_type(tagtype, 6);
- status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("iso14443a card select failed");
- ul_switch_off_field();
- return status;
- }
-
- if ( hasAuthKey ) {
- if ((tagtype & UL_C))
- try3DesAuthentication(authenticationkey);
- else
- ulev1_requestAuthentication(authenticationkey, pack, sizeof(pack));
- }
-
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) return -1;
+
// read pages 0,1,2,3 (should read 4pages)
status = ul_read(0, data, sizeof(data));
if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ A");
+ ul_switch_off_field();
+ PrintAndLog("Error: tag didn't answer to READ");
return status;
+ } else if (status == 16) {
+ ul_print_default(data);
+ ndef_print_CC(data+12);
+ } else {
+ locked = true;
}
- ul_print_default(data);
-
+ // UL_C Specific
if ((tagtype & UL_C)){
// read pages 0x28, 0x29, 0x2A, 0x2B
status = ul_read(0x28, ulc_conf, sizeof(ulc_conf));
if ( status == -1 ){
PrintAndLog("Error: tag didn't answer to READ UL-C");
+ ul_switch_off_field();
return status;
}
- ulc_print_configuration(ulc_conf);
+ if (status == 16) ulc_print_configuration(ulc_conf);
+ else locked = true;
if ((tagtype & MAGIC)){
-
+ //just read key
uint8_t ulc_deskey[16] = {0x00};
status = ul_read(0x2C, ulc_deskey, sizeof(ulc_deskey));
if ( status == -1 ){
+ ul_switch_off_field();
PrintAndLog("Error: tag didn't answer to READ magic");
return status;
}
- ulc_print_3deskey(ulc_deskey);
+ if (status == 16) ulc_print_3deskey(ulc_deskey);
} else {
+ ul_switch_off_field();
// if we called info with key, just return
if ( hasAuthKey ) return 1;
// also try to diversify default keys.. look into CmdHF14AMfuGenDiverseKeys
PrintAndLog("Trying some default 3des keys");
- ul_switch_off_field();
for (uint8_t i = 0; i < KEYS_3DES_COUNT; ++i ){
key = default_3des_keys[i];
- if (try3DesAuthentication(key) == 1){
- PrintAndLog("Found default 3des key: "); //%s", sprint_hex(key,16));
+ if (ulc_authentication(key, true)){
+ PrintAndLog("Found default 3des key: ");
uint8_t keySwap[16];
memcpy(keySwap, SwapEndian64(key,16,8), 16);
ulc_print_3deskey(keySwap);
- return 1;
- }
+ break;
+ }
}
+ // reselect for future tests (ntag test)
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) return -1;
}
}
-
+
+ // do counters and signature first (don't neet auth)
+
+ // ul counters are different than ntag counters
if ((tagtype & (UL_EV1_48 | UL_EV1_128))) {
+ if (ulev1_print_counters() != 3) {
+ // failed - re-select
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) return -1;
+ }
+ }
- ulev1_print_counters();
-
+ if ((tagtype & (UL_EV1_48 | UL_EV1_128 | NTAG_213 | NTAG_215 | NTAG_216 | NTAG_I2C_1K | NTAG_I2C_2K ))) {
uint8_t ulev1_signature[32] = {0x00};
status = ulev1_readSignature( ulev1_signature, sizeof(ulev1_signature));
if ( status == -1 ){
PrintAndLog("Error: tag didn't answer to READ SIGNATURE");
+ ul_switch_off_field();
return status;
}
- ulev1_print_signature( ulev1_signature, sizeof(ulev1_signature));
-
- uint8_t startconfigblock = (tagtype & UL_EV1_48) ? 0x10 : 0x25;
- uint8_t ulev1_conf[16] = {0x00};
- status = ul_read(startconfigblock, ulev1_conf, sizeof(ulev1_conf));
- if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ EV1");
- return status;
+ if (status == 32) ulev1_print_signature( ulev1_signature, sizeof(ulev1_signature));
+ else {
+ // re-select
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) return -1;
}
- // save AUTHENTICATION LIMITS for later:
- authlim = (ulev1_conf[4] & 0x07);
- bool allZeros = true;
- for (uint8_t idx=0; idx<8; idx++)
- if (ulev1_conf[idx]) allZeros = false;
-
- if (allZeros) authlim=7;
- ulev1_print_configuration(ulev1_conf);
}
- if ((tagtype & (UL_EV1_48 | UL_EV1_128 | NTAG_213 | NTAG_215 | NTAG_216))) {
-
+ if ((tagtype & (UL_EV1_48 | UL_EV1_128 | NTAG_210 | NTAG_212 | NTAG_213 | NTAG_215 | NTAG_216 | NTAG_I2C_1K | NTAG_I2C_2K))) {
uint8_t version[10] = {0x00};
status = ulev1_getVersion(version, sizeof(version));
if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to GET_VERSION");
+ PrintAndLog("Error: tag didn't answer to GETVERSION");
+ ul_switch_off_field();
return status;
+ } else if (status == 10) {
+ ulev1_print_version(version);
+ } else {
+ locked = true;
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) return -1;
}
- ulev1_print_version(version);
- // if we called info with key, just return
- if ( hasAuthKey ) return 1;
-
+ uint8_t startconfigblock = 0;
+ uint8_t ulev1_conf[16] = {0x00};
+ // config blocks always are last 4 pages
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++)
+ if (tagtype & UL_TYPES_ARRAY[idx])
+ startconfigblock = UL_MEMORY_ARRAY[idx]-3;
+
+ if (startconfigblock){ // if we know where the config block is...
+ status = ul_read(startconfigblock, ulev1_conf, sizeof(ulev1_conf));
+ if ( status == -1 ) {
+ PrintAndLog("Error: tag didn't answer to READ EV1");
+ ul_switch_off_field();
+ return status;
+ } else if (status == 16) {
+ // save AUTHENTICATION LIMITS for later:
+ authlim = (ulev1_conf[4] & 0x07);
+ ulev1_print_configuration(ulev1_conf);
+ }
+ }
+
// AUTHLIMIT, (number of failed authentications)
// 0 = limitless.
- // 1-7 = ... should we even try then?
- if ( authlim == 0 ){
+ // 1-7 = limit. No automatic tries then.
+ // hasAuthKey, if we was called with key, skip test.
+ if ( !authlim && !hasAuthKey ) {
PrintAndLog("\n--- Known EV1/NTAG passwords.");
-
-
- int len=0; //if len goes to -1 the connection will be turned off.
+ len = 0;
for (uint8_t i = 0; i < KEYS_PWD_COUNT; ++i ){
key = default_pwd_pack[i];
- if ( len > -1 ){
len = ulev1_requestAuthentication(key, pack, sizeof(pack));
+ if (len >= 1) {
PrintAndLog("Found a default password: %s || Pack: %02X %02X",sprint_hex(key, 4), pack[0], pack[1]);
break;
- }
+ } else {
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) return -1;
+ }
}
- if (len > -1) ul_switch_off_field();
+ if (len < 1) PrintAndLog("password not known");
}
}
-
- if ((tagtype & (NTAG_213 | NTAG_215 | NTAG_216))){
- uint8_t cc[16] = {0x00};
- status = ul_read(3, cc, sizeof(cc));
- if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ ntag");
- return status;
- }
- ntag_print_CC(cc);
- }
-
ul_switch_off_field();
+ if (locked) PrintAndLog("\nTag appears to be locked, try using the key to get more info");
PrintAndLog("");
return 1;
}
//
-// Mifare Ultralight Write Single Block
+// Write Single Block
//
int CmdHF14AMfUWrBl(const char *Cmd){
- uint8_t blockNo = -1;
- bool chinese_card = FALSE;
- uint8_t bldata[16] = {0x00};
- UsbCommand resp;
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) < 3 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu wrbl <block number> <block data (8 hex symbols)> [w]");
- PrintAndLog(" [block number]");
- PrintAndLog(" [block data] - (8 hex symbols)");
- PrintAndLog(" [w] - Chinese magic ultralight tag");
- PrintAndLog("");
- PrintAndLog(" sample: hf mfu wrbl 0 01020304");
- PrintAndLog("");
- return 0;
- }
-
- blockNo = param_get8(Cmd, 0);
+ int blockNo = -1;
+ bool errors = false;
+ bool hasAuthKey = false;
+ bool hasPwdKey = false;
+ bool swapEndian = false;
- if (blockNo > MAX_UL_BLOCKS){
- PrintAndLog("Error: Maximum number of blocks is 15 for Ultralight Cards!");
- return 1;
- }
+ uint8_t cmdp = 0;
+ uint8_t keylen = 0;
+ uint8_t blockdata[20] = {0x00};
+ uint8_t data[16] = {0x00};
+ uint8_t authenticationkey[16] = {0x00};
+ uint8_t *keyPtr = authenticationkey;
- if (param_gethex(Cmd, 1, bldata, 8)) {
- PrintAndLog("Block data must include 8 HEX symbols");
- return 1;
+ // starting with getting tagtype
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) return -1;
+
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_mfu_wrbl();
+ case 'k':
+ case 'K':
+ // EV1/NTAG size key
+ keylen = param_gethex(Cmd, cmdp+1, data, 8);
+ if ( !keylen ) {
+ memcpy(authenticationkey, data, 4);
+ cmdp += 2;
+ hasPwdKey = true;
+ break;
+ }
+ // UL-C size key
+ keylen = param_gethex(Cmd, cmdp+1, data, 32);
+ if (!keylen){
+ memcpy(authenticationkey, data, 16);
+ cmdp += 2;
+ hasAuthKey = true;
+ break;
+ }
+ PrintAndLog("\nERROR: Key is incorrect length\n");
+ errors = true;
+ break;
+ case 'b':
+ case 'B':
+ blockNo = param_get8(Cmd, cmdp+1);
+
+ uint8_t maxblockno = 0;
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
+ if (tagtype & UL_TYPES_ARRAY[idx])
+ maxblockno = UL_MEMORY_ARRAY[idx]+1;
+ }
+
+ if (blockNo < 0) {
+ PrintAndLog("Wrong block number");
+ errors = true;
+ }
+ if (blockNo > maxblockno){
+ PrintAndLog("block number to large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'l':
+ case 'L':
+ swapEndian = true;
+ cmdp++;
+ break;
+ case 'd':
+ case 'D':
+ if ( param_gethex(Cmd, cmdp+1, blockdata, 8) ) {
+ PrintAndLog("Block data must include 8 HEX symbols");
+ errors = true;
+ break;
+ }
+ cmdp += 2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ //Validations
+ if(errors) return usage_hf_mfu_wrbl();
}
+
+ if ( blockNo == -1 ) return usage_hf_mfu_wrbl();
- if (strchr(Cmd,'w') != 0 || strchr(Cmd,'W') != 0 ) {
- chinese_card = TRUE;
+ // Swap endianness
+ if (swapEndian && hasAuthKey) keyPtr = SwapEndian64(authenticationkey, 16, 8);
+ if (swapEndian && hasPwdKey) keyPtr = SwapEndian64(authenticationkey, 4, 4);
+
+ if ( blockNo <= 3)
+ PrintAndLog("Special Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
+ else
+ PrintAndLog("Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
+
+
+
+ //Send write Block
+ UsbCommand c = {CMD_MIFAREU_WRITEBL, {blockNo}};
+ memcpy(c.d.asBytes,blockdata,4);
+
+ if ( hasAuthKey ){
+ c.arg[1] = 1;
+ memcpy(c.d.asBytes+4,authenticationkey,16);
+ }
+ else if ( hasPwdKey ) {
+ c.arg[1] = 2;
+ memcpy(c.d.asBytes+4,authenticationkey,4);
}
- if ( blockNo <= 3) {
- if (!chinese_card){
- PrintAndLog("Access Denied");
- } else {
- PrintAndLog("--specialblock no:%02x", blockNo);
- PrintAndLog("--data: %s", sprint_hex(bldata, 4));
- UsbCommand d = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(d.d.asBytes,bldata, 4);
- SendCommand(&d);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- }
- }
+ SendCommand(&c);
+ UsbCommand resp;
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
+ uint8_t isOK = resp.arg[0] & 0xff;
+ PrintAndLog("isOk:%02x", isOK);
} else {
- PrintAndLog("--block no:%02x", blockNo);
- PrintAndLog("--data: %s", sprint_hex(bldata, 4));
- UsbCommand e = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(e.d.asBytes,bldata, 4);
- SendCommand(&e);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- }
+ PrintAndLog("Command execute timeout");
}
+
return 0;
}
-
//
-// Mifare Ultralight Read Single Block
+// Read Single Block
//
int CmdHF14AMfURdBl(const char *Cmd){
- UsbCommand resp;
- uint8_t blockNo = -1;
- char cmdp = param_getchar(Cmd, 0);
+ int blockNo = -1;
+ bool errors = false;
+ bool hasAuthKey = false;
+ bool hasPwdKey = false;
+ bool swapEndian = false;
+ uint8_t cmdp = 0;
+ uint8_t keylen = 0;
+ uint8_t data[16] = {0x00};
+ uint8_t authenticationkey[16] = {0x00};
+ uint8_t *keyPtr = authenticationkey;
- if (strlen(Cmd) < 1 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu rdbl <block number>");
- PrintAndLog(" sample: hfu mfu rdbl 0");
- return 0;
- }
+ // starting with getting tagtype
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) return -1;
+
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_mfu_rdbl();
+ case 'k':
+ case 'K':
+ // EV1/NTAG size key
+ keylen = param_gethex(Cmd, cmdp+1, data, 8);
+ if ( !keylen ) {
+ memcpy(authenticationkey, data, 4);
+ cmdp += 2;
+ hasPwdKey = true;
+ break;
+ }
+ // UL-C size key
+ keylen = param_gethex(Cmd, cmdp+1, data, 32);
+ if (!keylen){
+ memcpy(authenticationkey, data, 16);
+ cmdp += 2;
+ hasAuthKey = true;
+ break;
+ }
+ PrintAndLog("\nERROR: Key is incorrect length\n");
+ errors = true;
+ break;
+ case 'b':
+ case 'B':
+ blockNo = param_get8(Cmd, cmdp+1);
+
+ uint8_t maxblockno = 0;
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
+ if (tagtype & UL_TYPES_ARRAY[idx])
+ maxblockno = UL_MEMORY_ARRAY[idx]+1;
+ }
- blockNo = param_get8(Cmd, 0);
-
- if (blockNo > MAX_UL_BLOCKS){
- PrintAndLog("Error: Maximum number of blocks is 15 for Ultralight");
- return 1;
+ if (blockNo < 0) {
+ PrintAndLog("Wrong block number");
+ errors = true;
+ }
+ if (blockNo > maxblockno){
+ PrintAndLog("block number to large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'l':
+ case 'L':
+ swapEndian = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ //Validations
+ if(errors) return usage_hf_mfu_rdbl();
}
+ if ( blockNo == -1 ) return usage_hf_mfu_rdbl();
+
+ // Swap endianness
+ if (swapEndian && hasAuthKey) keyPtr = SwapEndian64(authenticationkey, 16, 8);
+ if (swapEndian && hasPwdKey) keyPtr = SwapEndian64(authenticationkey, 4, 4);
+
+ //Read Block
UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
+ if ( hasAuthKey ){
+ c.arg[1] = 1;
+ memcpy(c.d.asBytes,authenticationkey,16);
+ }
+ else if ( hasPwdKey ) {
+ c.arg[1] = 2;
+ memcpy(c.d.asBytes,authenticationkey,4);
+ }
+
SendCommand(&c);
-
-
+ UsbCommand resp;
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
uint8_t isOK = resp.arg[0] & 0xff;
if (isOK) {
uint8_t *data = resp.d.asBytes;
- PrintAndLog("Block: %0d (0x%02X) [ %s]", (int)blockNo, blockNo, sprint_hex(data, 4));
+ PrintAndLog("Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(data, 4));
}
else {
PrintAndLog("Failed reading block: (%02x)", isOK);
} else {
PrintAndLog("Command execute time-out");
}
-
return 0;
}
-int usage_hf_mfu_info(void)
-{
+int usage_hf_mfu_info(void) {
PrintAndLog("It gathers information about the tag and tries to detect what kind it is.");
PrintAndLog("Sometimes the tags are locked down, and you may need a key to be able to read the information");
PrintAndLog("The following tags can be identified:\n");
PrintAndLog("Ultralight, Ultralight-C, Ultralight EV1");
PrintAndLog("NTAG 213, NTAG 215, NTAG 216");
PrintAndLog("my-d, my-d NFC, my-d move, my-d move NFC\n");
- PrintAndLog("Usage: hf mfu info k <key>");
+ PrintAndLog("Usage: hf mfu info h k <key>");
PrintAndLog(" Options : ");
+ PrintAndLog(" h : this help");
PrintAndLog(" k <key> : key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
PrintAndLog("");
PrintAndLog(" sample : hf mfu info");
return 0;
}
-int usage_hf_mfu_dump(void)
-{
+int usage_hf_mfu_dump(void) {
PrintAndLog("Reads all pages from Ultralight, Ultralight-C, Ultralight EV1");
PrintAndLog("and saves binary dump into the file `filename.bin` or `cardUID.bin`");
PrintAndLog("It autodetects card type.\n");
- PrintAndLog("Usage: hf mfu dump s k <key> n <filename w/o .bin>");
+ PrintAndLog("Usage: hf mfu dump l k <key> n <filename w/o .bin> p <> q <>");
PrintAndLog(" Options : ");
- PrintAndLog(" k <key> : Enter key for authentication");
- PrintAndLog(" n <FN > : Enter filename w/o .bin to save the dump as");
- PrintAndLog(" s : Swap entered key's endianness for auth");
+ PrintAndLog(" h : this help");
+ PrintAndLog(" k <key> : key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLog(" l : swap entered key's endianness for auth");
+ PrintAndLog(" n <FN > : filename w/o .bin to save the dump as");
+ PrintAndLog(" p <Pg > : starting Page number to manually set a page to start the dump at");
+ PrintAndLog(" q <qty> : number of Pages to manually set how many pages to dump");
+
PrintAndLog("");
PrintAndLog(" sample : hf mfu dump");
PrintAndLog(" : hf mfu dump n myfile");
return 0;
}
+int usage_hf_mfu_rdbl(void) {
+ PrintAndLog("Read a block and print. It autodetects card type.\n");
+ PrintAndLog("Usage: hf mfu rdbl h l b <block number> k <key> \n");
+ PrintAndLog(" Options:");
+ PrintAndLog(" h : this help");
+ PrintAndLog(" b <no> : block to read");
+ PrintAndLog(" k <key> : key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLog(" l : swap entered key's endianness");
+ PrintAndLog("");
+ PrintAndLog(" sample : hf mfu rdbl b 0");
+ PrintAndLog(" : hf mfu rdbl b 0 k 00112233445566778899AABBCCDDEEFF");
+ PrintAndLog(" : hf mfu rdbl b 0 k 11223344\n");
+ return 0;
+}
+
+int usage_hf_mfu_wrbl(void) {
+ PrintAndLog("Write a block. It autodetects card type.\n");
+ PrintAndLog("Usage: hf mfu wrbl b <block number> d <data> k <key> l\n");
+ PrintAndLog(" Options:");
+ PrintAndLog(" h : this help");
+ PrintAndLog(" b <no> : block to write");
+ PrintAndLog(" d <data> : [block data] - (8 hex symbols)");
+ PrintAndLog(" k <key> : key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLog(" l : swap entered key's endianness");
+ PrintAndLog("");
+ PrintAndLog(" sample : hf mfu wrbl b 0 d 01020304");
+ PrintAndLog(" : hf mfu wrbl b 0 d 01020304 k 11223344\n");
+ return 0;
+}
+
//
// Mifare Ultralight / Ultralight-C / Ultralight-EV1
// Read and Dump Card Contents, using auto detection of tag size.
FILE *fout;
char filename[FILE_PATH_SIZE] = {0x00};
char * fnameptr = filename;
- char* str = "Dumping Ultralight%s%s Card Data...";
uint8_t *lockbytes_t = NULL;
uint8_t lockbytes[2] = {0x00};
uint8_t *lockbytes_t2 = NULL;
size_t fileNlen = 0;
bool errors = false;
bool swapEndian = false;
+ bool manualPages = false;
+ uint8_t startPage = 0;
+ char tempStr[50];
while(param_getchar(Cmd, cmdp) != 0x00)
{
return usage_hf_mfu_dump();
case 'k':
case 'K':
- dataLen = param_gethex(Cmd, cmdp+1, data, 32);
- if (dataLen) {
- errors = true;
- } else {
- memcpy(key, data, 16);
- }
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ if (dataLen == 32) //ul-c
+ errors = param_gethex(tempStr, 0, key, dataLen);
+ else if (dataLen == 8) //ev1/ntag
+ errors = param_gethex(tempStr, 0, key, dataLen);
+ else{
+ PrintAndLog("\nERROR: Key is incorrect length\n");
+ errors = true;
+ }
+
cmdp += 2;
- hasPwd = true;
+ hasPwd = true;
+ break;
+ case 'l':
+ case 'L':
+ swapEndian = true;
+ cmdp++;
break;
case 'n':
case 'N':
if (fileNlen > FILE_PATH_SIZE-5) fileNlen = FILE_PATH_SIZE-5;
cmdp += 2;
break;
- case 's':
- swapEndian = true;
- cmdp++;
+ case 'p':
+ case 'P':
+ startPage = param_get8(Cmd, cmdp+1);
+ manualPages = true;
+ cmdp += 2;
+ break;
+ case 'q':
+ case 'Q':
+ Pages = param_get8(Cmd, cmdp+1);
+ cmdp += 2;
+ manualPages = true;
break;
default:
PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
//Validations
if(errors) return usage_hf_mfu_dump();
- if (swapEndian)
+ if (swapEndian && dataLen == 32)
keyPtr = SwapEndian64(data, 16, 8);
TagTypeUL_t tagtype = GetHF14AMfU_Type();
if (tagtype == UL_ERROR) return -1;
- if ( tagtype & UL ) {
- Pages = 16;
- PrintAndLog(str,"", (tagtype & MAGIC)?" (magic)":"" );
- }
- else if ( tagtype & UL_C ) {
- Pages = 44;
- PrintAndLog(str,"-C", (tagtype & MAGIC)?" (magic)":"" );
- }
- else if ( tagtype & UL_EV1_48 ) {
- Pages = 18;
- PrintAndLog(str," EV1_48","");
- }
- else if ( tagtype & UL_EV1_128 ) {
- Pages = 32;
- PrintAndLog(str," EV1_128","");
- } else {
- Pages = 16;
- PrintAndLog("Dumping unknown Ultralight, using default values.");
- }
-
- UsbCommand c = {CMD_MIFAREUC_READCARD, {0,Pages}};
- if ( hasPwd ) {
- c.arg[2] = 1;
- memcpy(c.d.asBytes, key, 16);
+ if (!manualPages)
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++)
+ if (tagtype & UL_TYPES_ARRAY[idx])
+ Pages = UL_MEMORY_ARRAY[idx]+1;
+
+ ul_print_type(tagtype, 0);
+ PrintAndLog("Reading tag memory...");
+ UsbCommand c = {CMD_MIFAREU_READCARD, {startPage,Pages}};
+ if ( hasPwd ) {
+ if (tagtype & UL_C)
+ c.arg[2] = 1; //UL_C auth
+ else
+ c.arg[2] = 2; //UL_EV1/NTAG auth
+
+ memcpy(c.d.asBytes, key, dataLen/2);
}
SendCommand(&c);
UsbCommand resp;
PrintAndLog("Command execute time-out");
return 1;
}
- PrintAndLog ("%u,%u",resp.arg[0],resp.arg[1]);
- uint8_t isOK = resp.arg[0] & 0xff;
- if (isOK) {
- memcpy(data, resp.d.asBytes, resp.arg[1]);
- } else {
+ if (resp.arg[0] != 1) {
PrintAndLog("Failed reading block: (%02x)", i);
return 1;
}
+ uint32_t bufferSize = resp.arg[1];
+ if (bufferSize > sizeof(data)) {
+ PrintAndLog("Data exceeded Buffer size!");
+ bufferSize = sizeof(data);
+ }
+ GetFromBigBuf(data, bufferSize, 0);
+ WaitForResponse(CMD_ACK,NULL);
+
+ Pages = bufferSize/4;
// Load lock bytes.
int j = 0;
}
// Load bottom lockbytes if available
+ // TODO -- FIGURE OUT LOCK BYTES FOR TO EV1 and/or NTAG
if ( Pages == 44 ) {
lockbytes_t2 = data + (40*4);
lockbytes2[0] = lockbytes_t2[2];
}
}
- // add keys
- if (hasPwd){
- memcpy(data + Pages*4, key, 16);
+ // add keys to block dump
+ if (hasPwd && (tagtype & UL_C)){ //UL_C
+ memcpy(data + Pages*4, key, dataLen/2);
Pages += 4;
+ } else if (hasPwd) { //not sure output is in correct location.
+ memcpy(data + Pages*4, key, dataLen/2);
+ Pages += 1;
}
+
for (i = 0; i < Pages; ++i) {
if ( i < 3 ) {
PrintAndLog("Block %02x:%s ", i,sprint_hex(data + i * 4, 4));
return 0;
}
-// Needed to Authenticate to Ultralight C tags
-void rol (uint8_t *data, const size_t len){
- uint8_t first = data[0];
- for (size_t i = 0; i < len-1; i++) {
- data[i] = data[i+1];
- }
- data[len-1] = first;
-}
-
//-------------------------------------------------------------------------------
// Ultralight C Methods
//-------------------------------------------------------------------------------
}
uint8_t *key = default_3des_keys[keyNo];
- if (try3DesAuthentication(key)>0)
+ if (ulc_authentication(key, true))
PrintAndLog("Authentication successful. 3des key: %s",sprint_hex(key, 16));
else
PrintAndLog("Authentication failed");
return 0;
}
-int try3DesAuthentication( uint8_t *key){
-
- uint32_t cuid = 0;
-
- des3_context ctx = { 0 };
-
- uint8_t random_a[8] = { 1,1,1,1,1,1,1,1 };
- uint8_t random_b[8] = { 0 };
- uint8_t enc_random_b[8] = { 0 };
- uint8_t rnd_ab[16] = { 0 };
- uint8_t iv[8] = { 0 };
-
- UsbCommand c = {CMD_MIFAREUC_AUTH1, {0x00}};
- SendCommand(&c);
- UsbCommand resp;
- if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) return -1;
- if ( !(resp.arg[0] & 0xff) ) return -2;
-
- cuid = resp.arg[1];
- memcpy(enc_random_b,resp.d.asBytes+1,8);
-
- des3_set2key_dec(&ctx, key);
- // context, mode, length, IV, input, output
- des3_crypt_cbc( &ctx, DES_DECRYPT, sizeof(random_b), iv , enc_random_b , random_b);
-
- rol(random_b,8);
- memcpy(rnd_ab ,random_a,8);
- memcpy(rnd_ab+8,random_b,8);
-
- //PrintAndLog(" RndA :%s", sprint_hex(random_a, 8));
- //PrintAndLog(" enc(RndB) :%s", sprint_hex(enc_random_b, 8));
- //PrintAndLog(" RndB :%s", sprint_hex(random_b, 8));
- //PrintAndLog(" A+B :%s", sprint_hex(rnd_ab, 16));
-
- des3_set2key_enc(&ctx, key);
- // context, mode, length, IV, input, output
- des3_crypt_cbc(&ctx, DES_ENCRYPT, sizeof(rnd_ab), enc_random_b, rnd_ab, rnd_ab);
-
- //Auth2
- c.cmd = CMD_MIFAREUC_AUTH2;
- c.arg[0] = cuid;
- memcpy(c.d.asBytes, rnd_ab, 16);
- SendCommand(&c);
-
- if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
- if ( !(resp.arg[0] & 0xff)) return -2;
-
- uint8_t enc_resp[8] = { 0 };
- uint8_t resp_random_a[8] = { 0 };
- memcpy(enc_resp, resp.d.asBytes+1, 8);
-
- des3_set2key_dec(&ctx, key);
- // context, mode, length, IV, input, output
- des3_crypt_cbc( &ctx, DES_DECRYPT, 8, enc_random_b, enc_resp, resp_random_a);
-
- //PrintAndLog(" enc(A+B) :%s", sprint_hex(rnd_ab, 16));
- //PrintAndLog(" enc(RndA') :%s", sprint_hex(enc_resp, 8));
-
- if ( !memcmp(resp_random_a, random_a, 8))
- return 1;
- return 0;
-}
-
/**
A test function to validate that the polarssl-function works the same
was as the openssl-implementation.
}
**/
-//
-// Ultralight C Read Single Block
-//
-int CmdHF14AMfUCRdBl(const char *Cmd)
-{
- UsbCommand resp;
- bool hasPwd = FALSE;
- uint8_t blockNo = -1;
- uint8_t key[16];
- char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) < 1 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu crdbl <block number> <key>");
- PrintAndLog("");
- PrintAndLog("sample: hf mfu crdbl 0");
- PrintAndLog(" hf mfu crdbl 0 00112233445566778899AABBCCDDEEFF");
- return 0;
- }
-
- blockNo = param_get8(Cmd, 0);
- if (blockNo < 0) {
- PrintAndLog("Wrong block number");
- return 1;
- }
-
- if (blockNo > MAX_ULC_BLOCKS ){
- PrintAndLog("Error: Maximum number of blocks is 47 for Ultralight-C");
- return 1;
- }
-
- // key
- if ( strlen(Cmd) > 3){
- if (param_gethex(Cmd, 1, key, 32)) {
- PrintAndLog("Key must include %d HEX symbols", 32);
- return 1;
- } else {
- hasPwd = TRUE;
- }
- }
-
- //Read Block
- UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
- if ( hasPwd ) {
- c.arg[1] = 1;
- memcpy(c.d.asBytes,key,16);
- }
- SendCommand(&c);
-
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- if (isOK) {
- uint8_t *data = resp.d.asBytes;
- PrintAndLog("Block: %0d (0x%02X) [ %s]", (int)blockNo, blockNo, sprint_hex(data, 4));
- }
- else {
- PrintAndLog("Failed reading block: (%02x)", isOK);
- }
- } else {
- PrintAndLog("Command execute time-out");
- }
- return 0;
-}
-
-//
-// Mifare Ultralight C Write Single Block
-//
-int CmdHF14AMfUCWrBl(const char *Cmd){
-
- uint8_t blockNo = -1;
- bool chinese_card = FALSE;
- uint8_t bldata[16] = {0x00};
- UsbCommand resp;
-
- char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) < 3 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu cwrbl <block number> <block data (8 hex symbols)> [w]");
- PrintAndLog(" [block number]");
- PrintAndLog(" [block data] - (8 hex symbols)");
- PrintAndLog(" [w] - Chinese magic ultralight tag");
- PrintAndLog("");
- PrintAndLog(" sample: hf mfu cwrbl 0 01020304");
- PrintAndLog("");
- return 0;
- }
-
- blockNo = param_get8(Cmd, 0);
- if (blockNo > MAX_ULC_BLOCKS ){
- PrintAndLog("Error: Maximum number of blocks is 47 for Ultralight-C Cards!");
- return 1;
- }
-
- if (param_gethex(Cmd, 1, bldata, 8)) {
- PrintAndLog("Block data must include 8 HEX symbols");
- return 1;
- }
-
- if (strchr(Cmd,'w') != 0 || strchr(Cmd,'W') != 0 ) {
- chinese_card = TRUE;
- }
-
- if ( blockNo <= 3 ) {
- if (!chinese_card){
- PrintAndLog("Access Denied");
- return 1;
- } else {
- PrintAndLog("--Special block no: 0x%02x", blockNo);
- PrintAndLog("--Data: %s", sprint_hex(bldata, 4));
- UsbCommand d = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(d.d.asBytes,bldata, 4);
- SendCommand(&d);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- return 1;
- }
- }
- } else {
- PrintAndLog("--Block no : 0x%02x", blockNo);
- PrintAndLog("--Data: %s", sprint_hex(bldata, 4));
- UsbCommand e = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(e.d.asBytes,bldata, 4);
- SendCommand(&e);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk : %02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- return 1;
- }
- }
- return 0;
-}
-
//
// Mifare Ultralight C - Set password
//
// return;
// }
+//------------------------------------
+// Menu Stuff
+//------------------------------------
static command_t CommandTable[] =
{
{"help", CmdHelp, 1, "This help"},
{"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},
{"info", CmdHF14AMfUInfo, 0, "Tag information"},
{"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C tag to binary file"},
- {"rdbl", CmdHF14AMfURdBl, 0, "Read block - Ultralight"},
- {"wrbl", CmdHF14AMfUWrBl, 0, "Write block - Ultralight"},
- {"crdbl", CmdHF14AMfUCRdBl, 0, "Read block - Ultralight C"},
- {"cwrbl", CmdHF14AMfUCWrBl, 0, "Write block - Ultralight C"},
+ {"rdbl", CmdHF14AMfURdBl, 0, "Read block"},
+ {"wrbl", CmdHF14AMfUWrBl, 0, "Write block"},
{"cauth", CmdHF14AMfucAuth, 0, "Authentication - Ultralight C"},
{"setpwd", CmdHF14AMfucSetPwd, 1, "Set 3des password - Ultralight-C"},
{"setuid", CmdHF14AMfucSetUid, 1, "Set UID - MAGIC tags only"},
projects / proxmark3-svn / blobdiff