CHG: lowered the timout again, but re-added the spindelay since 14a requires 5ms...

[proxmark3-svn] / armsrc / ticks.c

diff --git a/armsrc/ticks.c b/armsrc/ticks.c
index 4aaa9c98458c96d07acd97b661c838c326e4cfb9..d183c707002987f63fe879961127f20d3745db24 100644 (file)
--- a/armsrc/ticks.c
+++ b/armsrc/ticks.c
@@ -48,7 +48,7 @@ void SpinDelay(int ms) {
 //     SpinDelay(1000);
 //     ti = GetTickCount() - ti;
 //     Dbprintf("timer(1s): %d t=%d", ti, GetTickCount());
-void StartTickCount() {
+void StartTickCount(void) {
        // This timer is based on the slow clock. The slow clock frequency is between 22kHz and 40kHz.
        // We can determine the actual slow clock frequency by looking at the Main Clock Frequency Register.
     uint16_t mainf = AT91C_BASE_PMC->PMC_MCFR & 0xffff;                // = 16 * main clock frequency (16MHz) / slow clock frequency
@@ -60,14 +60,14 @@ void StartTickCount() {
 /*
 * Get the current count.
 */
-uint32_t RAMFUNC GetTickCount(){
+uint32_t RAMFUNC GetTickCount(void){
        return AT91C_BASE_RTTC->RTTC_RTVR;// was * 2;
 }
 
 //  -------------------------------------------------------------------------
 //  microseconds timer 
 //  -------------------------------------------------------------------------
-void StartCountUS() {
+void StartCountUS(void) {
        AT91C_BASE_PMC->PMC_PCER |= (1 << 12) | (1 << 13) | (1 << 14);
        AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE;
 
@@ -87,25 +87,20 @@ void StartCountUS() {
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
        AT91C_BASE_TCB->TCB_BCR = 1;
        
-       while (AT91C_BASE_TC1->TC_CV > 1);
+       while (AT91C_BASE_TC1->TC_CV >= 1);
 }
 
-uint32_t RAMFUNC GetCountUS(){
+uint32_t RAMFUNC GetCountUS(void){
        //return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV / 15) * 10);
        //  By suggestion from PwPiwi, http://www.proxmark.org/forum/viewtopic.php?pid=17548#p17548
        return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV * 2) / 3); 
 }
-void ResetUSClock(void) {      
-       //enable clock of timer and software trigger
-       AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
-       AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
-       while (AT91C_BASE_TC1->TC_CV > 1);
-}
+
 
 //  -------------------------------------------------------------------------
 //  Timer for iso14443 commands. Uses ssp_clk from FPGA 
 //  -------------------------------------------------------------------------
-void StartCountSspClk() {
+void StartCountSspClk(void) {
        AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC0) | (1 << AT91C_ID_TC1) | (1 << AT91C_ID_TC2);  // Enable Clock to all timers
        AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_TIOA1               // XC0 Clock = TIOA1
                                                        | AT91C_TCB_TC1XC1S_NONE                // XC1 Clock = none
@@ -160,17 +155,17 @@ void StartCountSspClk() {
 
        // The high word of the counter (TC2) will not reset until the low word (TC0) overflows. 
        // Therefore need to wait quite some time before we can use the counter.
-       while (AT91C_BASE_TC2->TC_CV > 1);
+       while (AT91C_BASE_TC2->TC_CV >= 1);
 }
 void ResetSspClk(void) {       
        //enable clock of timer and software trigger
        AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
        AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
+       while (AT91C_BASE_TC2->TC_CV >= 1);     
 }
 
-uint32_t RAMFUNC GetCountSspClk(){
-
+uint32_t RAMFUNC GetCountSspClk(void) {
        uint32_t tmp_count = (AT91C_BASE_TC2->TC_CV << 16) | AT91C_BASE_TC0->TC_CV;
        if ((tmp_count & 0x0000ffff) == 0)  //small chance that we may have missed an increment in TC2
                return (AT91C_BASE_TC2->TC_CV << 16);
@@ -216,5 +211,5 @@ void ResetTicks(){
 }
 void ResetTimer(AT91PS_TC timer){
        timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
-       while(timer->TC_CV > 1) ;
+       while(timer->TC_CV >= 1) ;
 }