CHG: the AT91C_BASE_PMC->PMC_PCER has a tendecy to be clear when set with "=", ...

[proxmark3-svn] / armsrc / lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index ab86f9311cf49d911c658d1ba29f16101a5068a7..f6cbbfba380d572b0a7f7a76ee20bdef54566ed5 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -91,6 +91,7 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t periods, uint3
 */
 void ReadTItag(void)
 {
 */
 void ReadTItag(void)
 {

+       StartTicks();

        // some hardcoded initial params
        // when we read a TI tag we sample the zerocross line at 2Mhz
        // TI tags modulate a 1 as 16 cycles of 123.2Khz
        // some hardcoded initial params
        // when we read a TI tag we sample the zerocross line at 2Mhz
        // TI tags modulate a 1 as 16 cycles of 123.2Khz


@@ -216,6 +217,7 @@ void ReadTItag(void)
                        DbpString("Info: CRC is good");
                }
        }
                        DbpString("Info: CRC is good");
                }
        }

+       StopTicks();

 }
 
 void WriteTIbyte(uint8_t b)
 }
 
 void WriteTIbyte(uint8_t b)


@@ -282,7 +284,7 @@ void AcquireTiType(void)
        HIGH(GPIO_SSC_DOUT);
 
        // Charge TI tag for 50ms.
        HIGH(GPIO_SSC_DOUT);
 
        // Charge TI tag for 50ms.

-       SpinDelay(50);
+       WaitMS(50);

 
        // stop modulating antenna and listen
        LOW(GPIO_SSC_DOUT);
 
        // stop modulating antenna and listen
        LOW(GPIO_SSC_DOUT);


@@ -322,6 +324,7 @@ void AcquireTiType(void)
 // if not provided a valid crc will be computed from the data and written.
 void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 {
 // if not provided a valid crc will be computed from the data and written.
 void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 {

+       StartTicks();

        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        if(crc == 0) {
                crc = update_crc16(crc, (idlo)&0xff);
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        if(crc == 0) {
                crc = update_crc16(crc, (idlo)&0xff);


@@ -360,7 +363,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 
        // modulate antenna
        HIGH(GPIO_SSC_DOUT);
 
        // modulate antenna
        HIGH(GPIO_SSC_DOUT);

-       SpinDelay(50);  // charge time
+       WaitMS(50);     // charge time

 
        WriteTIbyte(0xbb); // keyword
        WriteTIbyte(0xeb); // password
 
        WriteTIbyte(0xbb); // keyword
        WriteTIbyte(0xeb); // password


@@ -377,7 +380,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
        WriteTIbyte(0x00); // write frame lo
        WriteTIbyte(0x03); // write frame hi
        HIGH(GPIO_SSC_DOUT);
        WriteTIbyte(0x00); // write frame lo
        WriteTIbyte(0x03); // write frame hi
        HIGH(GPIO_SSC_DOUT);

-       SpinDelay(50);  // programming time
+       WaitMS(50);     // programming time

 
        LED_A_OFF();
 
 
        LED_A_OFF();
 


@@ -386,35 +389,37 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        DbpString("Now use `lf ti read` to check");
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        DbpString("Now use `lf ti read` to check");

+       StopTicks();

 }
 
 void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 {
        int i = 0;
 }
 
 void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 {
        int i = 0;

-       uint8_t *tab = BigBuf_get_addr();
+       uint8_t *buf = BigBuf_get_addr();

 
 

+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
 
        AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
        AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
        AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
 
        AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
        AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
        AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
 

+       StartTicks();
+

        for(;;) {
                WDT_HIT();
 
                if (ledcontrol) LED_D_ON();
                                
        for(;;) {
                WDT_HIT();
 
                if (ledcontrol) LED_D_ON();
                                

-               //wait until SSC_CLK goes HIGH
+               // wait until SSC_CLK goes HIGH
+               // used as a simple detection of a reader field?

                while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
                        WDT_HIT();
                while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
                        WDT_HIT();

-                       if ( usb_poll_validate_length() || BUTTON_PRESS() ) {
-                               FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-                               LED_D_OFF();
-                               return;                         
-                       }
+                       if ( usb_poll_validate_length() || BUTTON_PRESS() )
+                               goto OUT;

                }
                
                }
                

-               if(tab[i])
+               if(buf[i])

                        OPEN_COIL();
                else
                        SHORT_COIL();
                        OPEN_COIL();
                else
                        SHORT_COIL();


@@ -424,11 +429,8 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
                //wait until SSC_CLK goes LOW
                while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
                        WDT_HIT();
                //wait until SSC_CLK goes LOW
                while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
                        WDT_HIT();

-                       if ( usb_poll_validate_length() || BUTTON_PRESS() ) {
-                               FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-                               LED_D_OFF();
-                               return;                         
-                       }
+                       if ( usb_poll_validate_length() || BUTTON_PRESS() )
+                               goto OUT;

                }
 
                i++;
                }
 
                i++;


@@ -441,6 +443,11 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
                        }
                }
        }
                        }
                }
        }

+OUT: 
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       StopTicks();
+       LED_D_OFF();
+       return; 

 }
 
 #define DEBUG_FRAME_CONTENTS 1
 }
 
 #define DEBUG_FRAME_CONTENTS 1


@@ -1116,10 +1123,10 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
  * Q5 tags seems to have issues when these values changes. 
  */
 
  * Q5 tags seems to have issues when these values changes. 
  */
 

-#define START_GAP 50*8 // was 250 // SPEC:  1*8 to 50*8 - typ 15*8 (or 15fc)
-#define WRITE_GAP 20*8 // was 160 // SPEC:  1*8 to 20*8 - typ 10*8 (or 10fc)
-#define WRITE_0   18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
-#define WRITE_1   50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc)  432 for T55x7; 448 for E5550
+#define START_GAP 50*8 // was 250 // SPEC:  1*8 to 50*8 - typ 15*8 (15fc)
+#define WRITE_GAP 20*8 // was 160 // SPEC:  1*8 to 20*8 - typ 10*8 (10fc)
+#define WRITE_0   18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (24fc)
+#define WRITE_1   54*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (56fc)  432 for T55x7; 448 for E5550

 #define READ_GAP  15*8 
 
 //  VALUES TAKEN FROM EM4x function: SendForward
 #define READ_GAP  15*8 
 
 //  VALUES TAKEN FROM EM4x function: SendForward


@@ -1128,7 +1135,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 //  WRITE_1   = 256 32*8;  (32*8) 
 
 //  These timings work for 4469/4269/4305 (with the 55*8 above)
 //  WRITE_1   = 256 32*8;  (32*8) 
 
 //  These timings work for 4469/4269/4305 (with the 55*8 above)

-//  WRITE_0 = 23*8 , 9*8  SpinDelayUs(23*8); 
+//  WRITE_0 = 23*8 , 9*8 

 
 // Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK)
 // TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz
 
 // Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK)
 // TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz


@@ -1136,7 +1143,10 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 // T0 = TIMER_CLOCK1 / 125000 = 192
 // 1 Cycle = 8 microseconds(us)  == 1 field clock
 
 // T0 = TIMER_CLOCK1 / 125000 = 192
 // 1 Cycle = 8 microseconds(us)  == 1 field clock
 

-void TurnReadLFOn(int delay) {
+// new timer:
+//     = 1us = 1.5ticks
+// 1fc = 8us = 12ticks
+void TurnReadLFOn(uint32_t delay) {

        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
        // measure antenna strength.
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
        // measure antenna strength.


@@ -1221,10 +1231,11 @@ void T55xxWriteBlockExt(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg)
        // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
        // so wait a little more)
        TurnReadLFOn(20 * 1000);
        // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
        // so wait a little more)
        TurnReadLFOn(20 * 1000);

-               //could attempt to do a read to confirm write took
-               // as the tag should repeat back the new block 
-               // until it is reset, but to confirm it we would 
-               // need to know the current block 0 config mode
+       
+       //could attempt to do a read to confirm write took
+       // as the tag should repeat back the new block 
+       // until it is reset, but to confirm it we would 
+       // need to know the current block 0 config mode

        
        // turn field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
        
        // turn field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);


@@ -1513,9 +1524,9 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) {
 //-----------------------------------
 // EM4469 / EM4305 routines
 //-----------------------------------
 //-----------------------------------
 // EM4469 / EM4305 routines
 //-----------------------------------

-#define FWD_CMD_LOGIN 0xC //including the even parity, binary mirrored
-#define FWD_CMD_WRITE 0xA
-#define FWD_CMD_READ 0x9
+#define FWD_CMD_LOGIN   0xC //including the even parity, binary mirrored
+#define FWD_CMD_WRITE   0xA
+#define FWD_CMD_READ    0x9

 #define FWD_CMD_DISABLE 0x5
 
 uint8_t forwardLink_data[64]; //array of forwarded bits
 #define FWD_CMD_DISABLE 0x5
 
 uint8_t forwardLink_data[64]; //array of forwarded bits


@@ -1534,7 +1545,7 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer
 //  WRITE_1   = 256 32*8;  (32*8) 
 
 //  These timings work for 4469/4269/4305 (with the 55*8 above)
 //  WRITE_1   = 256 32*8;  (32*8) 
 
 //  These timings work for 4469/4269/4305 (with the 55*8 above)

-//  WRITE_0 = 23*8 , 9*8  SpinDelayUs(23*8); 
+//  WRITE_0 = 23*8 , 9*8

 
 uint8_t Prepare_Cmd( uint8_t cmd ) {
 
 
 uint8_t Prepare_Cmd( uint8_t cmd ) {
 


@@ -1639,9 +1650,9 @@ void SendForward(uint8_t fwd_bit_count) {
                else {
                        //These timings work for 4469/4269/4305 (with the 55*8 above)
                        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
                else {
                        //These timings work for 4469/4269/4305 (with the 55*8 above)
                        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off

-                       WaitUS(23*8); //16-4 cycles off (8us each)      // ICEMAN:  problem with (us) clock is  21.3us increments
+                       WaitUS(16*8); //16-4 cycles off (8us each)      // ICEMAN:  problem with (us) clock is  21.3us increments

                        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
                        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on

-                       WaitUS(9*8); //16 cycles on (8us each)  // ICEMAN:  problem with (us) clock is  21.3us increments
+                       WaitUS(16*8); //16 cycles on (8us each) // ICEMAN:  problem with (us) clock is  21.3us increments

                }
        }
 }
                }
        }
 }


@@ -1649,22 +1660,20 @@ void SendForward(uint8_t fwd_bit_count) {
 void EM4xLogin(uint32_t Password) {
 
        uint8_t fwd_bit_count;
 void EM4xLogin(uint32_t Password) {
 
        uint8_t fwd_bit_count;

-

        forward_ptr = forwardLink_data;
        fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN );
        fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 );
        forward_ptr = forwardLink_data;
        fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN );
        fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 );

-

        SendForward(fwd_bit_count);
 
        //Wait for command to complete
        SendForward(fwd_bit_count);
 
        //Wait for command to complete

-       SpinDelay(20);
+       WaitMS(20);

 }
 
 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
 
        uint8_t fwd_bit_count;
        uint8_t *dest = BigBuf_get_addr();
 }
 
 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
 
        uint8_t fwd_bit_count;
        uint8_t *dest = BigBuf_get_addr();

-       uint16_t bufsize = BigBuf_max_traceLen();
+       uint16_t bufsize = BigBuf_max_traceLen();  // ICEMAN: this tries to fill up all tracelog space

        uint32_t i = 0;
 
        // Clear destination buffer before sending the command
        uint32_t i = 0;
 
        // Clear destination buffer before sending the command


@@ -1677,14 +1686,10 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
        fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
        fwd_bit_count += Prepare_Addr( Address );
 
        fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
        fwd_bit_count += Prepare_Addr( Address );
 

-       // Connect the A/D to the peak-detected low-frequency path.
-       SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-       // Now set up the SSC to get the ADC samples that are now streaming at us.
-       FpgaSetupSsc();
-

        SendForward(fwd_bit_count);
 
        // Now do the acquisition
        SendForward(fwd_bit_count);
 
        // Now do the acquisition

+       // ICEMAN, change to the one in lfsampling.c

        i = 0;
        for(;;) {
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
        i = 0;
        for(;;) {
                if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {


@@ -1717,7 +1722,7 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode
        SendForward(fwd_bit_count);
 
        //Wait for write to complete
        SendForward(fwd_bit_count);
 
        //Wait for write to complete

-       SpinDelay(20);
+       WaitMS(20);

        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_D_OFF();
 }
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        LED_D_OFF();
 }