// Miscellaneous routines for low frequency sampling.
//-----------------------------------------------------------------------------
-#include "proxmark3.h"
-#include "apps.h"
-#include "util.h"
-#include "string.h"
-
#include "lfsampling.h"
sample_config config = { 1, 8, 1, 95, 0 } ;
-void printConfig()
-{
+void printConfig() {
Dbprintf("LF Sampling config: ");
Dbprintf(" [q] divisor: %d ", config.divisor);
Dbprintf(" [b] bps: %d ", config.bits_per_sample);
* @brief setSamplingConfig
* @param sc
*/
-void setSamplingConfig(sample_config *sc)
-{
+void setSamplingConfig(sample_config *sc) {
if(sc->divisor != 0) config.divisor = sc->divisor;
- if(sc->bits_per_sample!= 0) config.bits_per_sample= sc->bits_per_sample;
- if(sc->decimation!= 0) config.decimation= sc->decimation;
- if(sc->trigger_threshold != -1) config.trigger_threshold= sc->trigger_threshold;
+ if(sc->bits_per_sample != 0) config.bits_per_sample = sc->bits_per_sample;
+ if(sc->decimation != 0) config.decimation = sc->decimation;
+ if(sc->trigger_threshold != -1) config.trigger_threshold = sc->trigger_threshold;
- config.averaging= sc->averaging;
+ config.averaging = sc->averaging;
if(config.bits_per_sample > 8) config.bits_per_sample = 8;
if(config.decimation < 1) config.decimation = 1;
printConfig();
}
-sample_config* getSamplingConfig()
-{
+sample_config* getSamplingConfig() {
return &config;
}
* @param stream
* @param bit
*/
-void pushBit( BitstreamOut* stream, uint8_t bit)
-{
+void pushBit( BitstreamOut* stream, uint8_t bit) {
int bytepos = stream->position >> 3; // divide by 8
int bitpos = stream->position & 7;
*(stream->buffer+bytepos) |= (bit > 0) << (7 - bitpos);
* 0 or 95 ==> 125 KHz
*
**/
-void LFSetupFPGAForADC(int divisor, bool lf_field)
-{
+void LFSetupFPGAForADC(int divisor, bool lf_field) {
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
if ( (divisor == 1) || (divisor < 0) || (divisor > 255) )
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
// Connect the A/D to the peak-detected low-frequency path.
SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
- // Give it a bit of time for the resonant antenna to settle.
+ // 50ms for the resonant antenna to settle.
SpinDelay(50);
// Now set up the SSC to get the ADC samples that are now streaming at us.
FpgaSetupSsc();
+ // start a 1.5ticks is 1us
+ StartTicks();
}
-
/**
* Does the sample acquisition. If threshold is specified, the actual sampling
* is not commenced until the threshold has been reached.
* @param silent - is true, now outputs are made. If false, dbprints the status
* @return the number of bits occupied by the samples.
*/
-uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold,bool silent)
-{
+uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold,bool silent) {
//bigbuf, to hold the aquired raw data signal
uint8_t *dest = BigBuf_get_addr();
uint16_t bufsize = BigBuf_max_traceLen();
- BigBuf_Clear_ext(false);
+ //BigBuf_Clear_ext(false); //creates issues with cmdread (marshmellow)
if(bits_per_sample < 1) bits_per_sample = 1;
if(bits_per_sample > 8) bits_per_sample = 8;
* @param silent
* @return number of bits sampled
*/
-uint32_t DoAcquisition_default(int trigger_threshold, bool silent)
-{
+uint32_t DoAcquisition_default(int trigger_threshold, bool silent) {
return DoAcquisition(1,8,0,trigger_threshold,silent);
}
-uint32_t DoAcquisition_config( bool silent)
-{
+uint32_t DoAcquisition_config( bool silent) {
return DoAcquisition(config.decimation
,config.bits_per_sample
,config.averaging
,silent);
}
-uint32_t ReadLF(bool activeField, bool silent)
-{
- if (!silent) printConfig();
+uint32_t ReadLF(bool activeField, bool silent) {
+ if (!silent)
+ printConfig();
LFSetupFPGAForADC(config.divisor, activeField);
- // Now call the acquisition routine
return DoAcquisition_config(silent);
}
* Initializes the FPGA for reader-mode (field on), and acquires the samples.
* @return number of bits sampled
**/
-uint32_t SampleLF(bool printCfg)
-{
+uint32_t SampleLF(bool printCfg) {
return ReadLF(true, printCfg);
}
/**
**/
void doT55x7Acquisition(size_t sample_size) {
- #define T55xx_READ_UPPER_THRESHOLD 128+60 // 60 grph
- #define T55xx_READ_LOWER_THRESHOLD 128-60 // -60 grph
- #define T55xx_READ_TOL 5
-
+ #define T55xx_READ_UPPER_THRESHOLD 128+40 // 60 grph
+ #define T55xx_READ_LOWER_THRESHOLD 128-40 // -60 grph
+ #define T55xx_READ_TOL 2
+
uint8_t *dest = BigBuf_get_addr();
uint16_t bufsize = BigBuf_max_traceLen();
if ( bufsize > sample_size )
bufsize = sample_size;
- uint16_t i = 0;
+ uint8_t curSample = 0, lastSample = 0;
+ uint16_t i = 0, skipCnt = 0;
bool startFound = false;
bool highFound = false;
bool lowFound = false;
- uint8_t curSample = 0;
- uint8_t lastSample = 0;
- uint16_t skipCnt = 0;
+
while(!BUTTON_PRESS() && !usb_poll_validate_length() && skipCnt < 1000 && (i < bufsize) ) {
WDT_HIT();
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
continue;
}
-
// skip until first high samples begin to change
- if (startFound || curSample > T55xx_READ_LOWER_THRESHOLD+T55xx_READ_TOL){
+ if (startFound || curSample > T55xx_READ_LOWER_THRESHOLD + T55xx_READ_TOL){
// if just found start - recover last sample
if (!startFound) {
dest[i++] = lastSample;
projects / proxmark3-svn / blobdiff