+#define PCF7931_DEFAULT_INITDELAY 17500
+#define PCF7931_DEFAULT_OFFSET_WIDTH 0
+#define PCF7931_DEFAULT_OFFSET_POSITION 0
+
+// Default values - Configuration
+struct pcf7931_config configPcf = {
+ {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
+ PCF7931_DEFAULT_INITDELAY,
+ PCF7931_DEFAULT_OFFSET_WIDTH,
+ PCF7931_DEFAULT_OFFSET_POSITION
+ };
+
+// Resets the configuration settings to default values.
+int pcf7931_resetConfig(){
+ memset(configPcf.Pwd, 0xFF, sizeof(configPcf.Pwd) );
+ configPcf.InitDelay = PCF7931_DEFAULT_INITDELAY;
+ configPcf.OffsetWidth = PCF7931_DEFAULT_OFFSET_WIDTH;
+ configPcf.OffsetPosition = PCF7931_DEFAULT_OFFSET_POSITION;
+ return 0;
+}
+
+int pcf7931_printConfig(){
+ PrintAndLog("Password (LSB first on bytes) : %s", sprint_hex( configPcf.Pwd, sizeof(configPcf.Pwd)));
+ PrintAndLog("Tag initialization delay : %d us", configPcf.InitDelay);
+ PrintAndLog("Offset low pulses width : %d us", configPcf.OffsetWidth);
+ PrintAndLog("Offset low pulses position : %d us", configPcf.OffsetPosition);
+ return 0;
+}
+
+int usage_pcf7931_read(){
+ PrintAndLog("Usage: lf pcf7931 read [h] ");
+ PrintAndLog("This command tries to read a PCF7931 tag.");
+ PrintAndLog("Options:");
+ PrintAndLog(" h This help");
+ PrintAndLog("Examples:");
+ PrintAndLog(" lf pcf7931 read");
+ return 0;
+}
+
+int usage_pcf7931_write(){
+ PrintAndLog("Usage: lf pcf7931 write [h] <block address> <byte address> <data>");
+ PrintAndLog("This command tries to write a PCF7931 tag.");
+ PrintAndLog("Options:");
+ PrintAndLog(" h This help");
+ PrintAndLog(" blockaddress Block to save [0-7]");
+ PrintAndLog(" byteaddress Index of byte inside block to write [0-15]");
+ PrintAndLog(" data one byte of data (hex)");
+ PrintAndLog("Examples:");
+ PrintAndLog(" lf pcf7931 write 2 1 FF");
+ return 0;
+}
+
+int usage_pcf7931_config(){
+ PrintAndLog("Usage: lf pcf7931 config [h] [r] <pwd> <delay> <offset width> <offset position>");
+ PrintAndLog("This command tries to set the configuration used with PCF7931 commands");
+ PrintAndLog("The time offsets could be useful to correct slew rate generated by the antenna");
+ PrintAndLog("Caling without some parameter will print the current configuration.");
+ PrintAndLog("Options:");
+ PrintAndLog(" h This help");
+ PrintAndLog(" r Reset configuration to default values");
+ PrintAndLog(" pwd Password, hex, 7bytes, LSB-order");
+ PrintAndLog(" delay Tag initialization delay (in us) decimal");
+ PrintAndLog(" offset Low pulses width (in us) decimal");
+ PrintAndLog(" offset Low pulses position (in us) decimal");
+ PrintAndLog("Examples:");
+ PrintAndLog(" lf pcf7931 config");
+ PrintAndLog(" lf pcf7931 config r");
+ PrintAndLog(" lf pcf7931 config 11223344556677 20000");
+ PrintAndLog(" lf pcf7931 config 11223344556677 17500 -10 30");
+ return 0;
+}
+
+int CmdLFPCF7931Read(const char *Cmd){
+
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( ctmp == 'H' || ctmp == 'h' ) return usage_pcf7931_read();
+
+ UsbCommand resp;
+ UsbCommand c = {CMD_PCF7931_READ, {0, 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+ PrintAndLog("command execution time out");
+ return 1;
+ }
+ return 0;
+}
+
+int CmdLFPCF7931Config(const char *Cmd){
+
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( ctmp == 0) return pcf7931_printConfig();
+ if ( ctmp == 'H' || ctmp == 'h' ) return usage_pcf7931_config();
+ if ( ctmp == 'R' || ctmp == 'r' ) return pcf7931_resetConfig();
+
+ if ( param_gethex(Cmd, 0, configPcf.Pwd, 14) ) return usage_pcf7931_config();
+
+ configPcf.InitDelay = (param_get32ex(Cmd,1,0,10) & 0xFFFF);
+ configPcf.OffsetWidth = (int)(param_get32ex(Cmd,2,0,10) & 0xFFFF);
+ configPcf.OffsetPosition = (int)(param_get32ex(Cmd,3,0,10) & 0xFFFF);
+
+ pcf7931_printConfig();
+ return 0;
+}
+
+int CmdLFPCF7931Write(const char *Cmd){
+
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) < 1 || ctmp == 'h' || ctmp == 'H') return usage_pcf7931_write();
+
+ uint8_t block = 0, bytepos = 0, data = 0;
+
+ if ( param_getdec(Cmd, 0, &block) ) return usage_pcf7931_write();
+ if ( param_getdec(Cmd, 1, &bytepos) ) return usage_pcf7931_write();
+
+ if ( (block > 7) || (bytepos > 15) ) return usage_pcf7931_write();
+
+ data = param_get8ex(Cmd, 2, 0, 16);
+
+ PrintAndLog("Writing block: %d", block);
+ PrintAndLog(" pos: %d", bytepos);
+ PrintAndLog(" data: 0x%02X", data);
+
+ UsbCommand c = {CMD_PCF7931_WRITE, { block, bytepos, data} };
+ memcpy(c.d.asDwords, configPcf.Pwd, sizeof(configPcf.Pwd) );
+ c.d.asDwords[7] = (configPcf.OffsetWidth + 128);
+ c.d.asDwords[8] = (configPcf.OffsetPosition + 128);
+ c.d.asDwords[9] = configPcf.InitDelay;
+
+ clearCommandBuffer();
+ SendCommand(&c);
+ //no ack?
+ return 0;
projects / proxmark3-svn / blobdiff