Typo in hf 14a sim help

[proxmark3-svn] / armsrc / util.c

diff --git a/armsrc/util.c b/armsrc/util.c
index 640809e068bd4719826fe2fc134a602d70f184be..120e7b44cb19de4f94ec23d64244fc35ddf547cc 100644 (file)
--- a/armsrc/util.c
+++ b/armsrc/util.c
@@ -14,8 +14,6 @@
 #include "apps.h"
 #include "BigBuf.h"
 
-
-
 void print_result(char *name, uint8_t *buf, size_t len) {
        uint8_t *p = buf;
 
@@ -400,17 +398,17 @@ void StartCountSspClk()
        AT91C_BASE_TC2->TC_CMR = AT91C_TC_CLKS_XC2                              // TC2 clock = XC2 clock = TIOA0
                                                        | AT91C_TC_WAVE                                 // Waveform Mode
                                                        | AT91C_TC_WAVESEL_UP;                  // just count
-       
+
        AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN;                                // enable TC0
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN;                                // enable TC1
        AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN;                                // enable TC2
 
-       //
-       // synchronize the counter with the ssp_frame signal. Note: FPGA must be in any iso14446 mode, otherwise the frame signal would not be present 
-       //
+       // synchronize the counter with the ssp_frame signal. 
+       // Note: FPGA must be in any iso14443 mode, otherwise the frame signal would not be present 
        while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME));   // wait for ssp_frame to go high (start of frame)
        while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME);              // wait for ssp_frame to be low
        while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK));     // wait for ssp_clk to go high
+
        // note: up to now two ssp_clk rising edges have passed since the rising edge of ssp_frame
        // it is now safe to assert a sync signal. This sets all timers to 0 on next active clock edge
        AT91C_BASE_TCB->TCB_BCR = 1;                                                    // assert Sync (set all timers to 0 on next active clock edge)
@@ -418,8 +416,9 @@ void StartCountSspClk()
        // at the next (4th) ssp_clk rising edge, TC0 (the low word of our counter) will be reset. From now on,
        // whenever the last three bits of our counter go 0, we can be sure to be in the middle of a frame transfer.
        // (just started with the transfer of the 4th Bit).
-       // The high word of the counter (TC2) will not reset until the low word (TC0) overflows. Therefore need to wait quite some time before
-       // we can use the counter.
+
+       // The high word of the counter (TC2) will not reset until the low word (TC0) overflows. 
+       // Therefore need to wait quite some time before we can use the counter.
        while (AT91C_BASE_TC0->TC_CV < 0xFFF0);
 }